Update to the CC query

Similar Questions

• Update on the table by extracting the data from the table even under certain conditions

  Hi Experts,

  I have the table EMP which currently has 6 entries.

  EMP_SYS BATCH_NO JOIN_DATE LOGIN_ID STATUS FLAG

  1 FEBRUARY 10 PROD 84 Y IND123 ABC

  DEV 1-23 APRIL 98 Y IND123 ABC

  2 12 APRIL PROD 98 Y IND123 ABC

  2 2 APRIL DEV 98 Y IND123 ABC

  3 13 APRIL PROD 98 Y IND123 ABC

  3 3 APRIL DEV 98 Y IND123 ABC

  CONDITION: I need to take lines which has the minimum BATCH_NO for each of the EMP_SYS

  for example,.

  1 FEBRUARY 10 PROD 84 Y IND123 ABC

  DEV 1-23 APRIL 98 Y IND123 ABC

  For the above two lines, I need to update the status of DEF. How to select this criterion and update in the same query?

  Currently, I used the query to select the minimum BATCH_NO for each of the EMP_SYS below.

  SELECT EMP_SYS, BATCH_NO, JOIN_DATE, FLAG, LOGIN_ID, STATUS

  Of

  (

  EMP_SYS, BATCH_NO, JOIN_DATE, FLAG, LOGIN_ID, STATUS, SELECT ROW_NUMBER)

  COURSE NR (PARTITION BY ORDER OF EMP_SYS OF EMP_SYS)

  FROM EMP

  WHEN STATUS = 'ABC' AND FLAG = "Y".

  )

  WHERE

  NR = 1;

  If I try to use the update on the above query statement... It updates every 6 rows instead of 2 rows.

  Please suggest me a way to update only the two lines that has the minimum BATCH_NO for each of the EMP_SYS.

  But is possible to write the query without using the Group of?

  Update e EMP

  set STATUS = "DEF".

  where BATCH_NO = (select min (BATCH_NO) from EMP I where STATUS = 'ABC' AND FLAG = 'Y' and i.emp_sys = e.emp_sys)

• DA on updatable report items Sql query using the class

  Request Express 4.2.5.00.08

  10-11 g Oracle

  I have a page, so it has a link/button when he clicks then modal region will appear. Modal region has a as a table (Type SQL Query (updateable report)). All work very well so far.

  
  

  However, I've now added some complex things.

  for example. My region is based on the query of SQL Type (editable report).

  SELECT id, name of family, Traghetti, area, d_date, start_time, End_time, displacement, role of table where id =: P10_ID;

  I can also add a new line of course.

  My problem is, (point) Shift display based on the value of Start_Time point) and so I made sure the class for two items.

  for example, Start_Time (' class = "st_tm" ') and Maj ('class to = "Shift_time" '). Start_Time is based on (LOV) and shift is off the point in the sql query, but change the Start_Time.

  And now, I created the DA.

  1. event: change

  Selection type: jQuery Selector

  jQuery Selector: .st_tm

  Condition: No.

  1. action: set value

  Set type: Expression Javascript

  The JavaScript Expression: $(this.triggeringElement) .val ();

  The element affected: P10_X1 (it is a hidden item)

  2. action: Plsql Code

  Code: start to null; end;

  Page items to submit: P10_X1

  3. action: Plsql Code

  Code: start

  If: P10_X1 between '03' AND '11' then

  : P10_X1: = 'EARLIES ';

  elsif: P10_X1 then '12' and '18'

  : P10_X1: = 'LATES ';

  on the other

  : P10_X1: = 'NIGHTS';

  end if;

  end;

  Page items to submit: P10_X1

  NOW another DA

  Event: change

  Article (s) P10_X1

  Condition (in list)

  value (HASTY, LATES, NIGHTS)

  Action:

  Set type: Expression Javascript

  The JavaScript Expression: $(this.triggeringElement) .val ();

  Affected item:

  Selection type: jQuery Selector

  jQuery Selector:. Shift_time

  Well, I look forward all the above work well, but I'm having a problem.

  If I have more than 1 lines on a modal region and if I change the Start_Time value for a row then MAJ (point) is changing but he effect on all lines.

  I want, if I make the changes on the line line # 2 while only 2 # MAJ (point) must be not performed any other lines?

  Help, please!

  Kind regards

  RI

  I found the solution me thank you.

  I removed all the DA mentioned above and created a new.

  1. event: change

  Selection type: jQuery Selector

  jQuery Selector: .st_tm

  Condition: No.

  Scope of the event: dynamic and light on page load.

  Action (Javascript code)

  ROW_ID = $(this.triggeringElement).attr('id').substr (4);

  If ($(this.triggeringElement). val() > = 03 &. val() $(this.triggeringElement))<= 11)="">

  .Val ('EARLIES') $(«#f11_» + row_id);

  }

  ElseIf ($(this.triggeringElement). > 11 val() & $(this.triggeringElement). val())<= 18)="">

  .Val ('LATES') $(«#f11_» + row_id);

  }

  ElseIf (. val() > $19 (this.triggeringElement)) {}

  .Val ('NIGHTS') $(«#f11_» + row_id);

  }

  also created another DA because I have a disabled report items.

  Event: before the page is sent.

  $('_:_disabled').removeAttr ("disabled");

  and finally created manual process of DML for tabular and everything works fine. (Insert, Update, and delete).

  Kind regards.

• UPDATE on the same table in the sub query

  DB version: 11.2
  
  We have a table called SHP_GC_TRACK, which has about 8 million records with partitions. In the below UPDATE, it updates a column based on the SELECT on the same table in a subquery.
  

  UPDATE shp_gc_track a
     SET f_tran_proc  = 'Y'
   WHERE last_update_date <
            (SELECT MAX (last_update_date)
               FROM shp_gc_track b
              WHERE a.shp_trx_rowid = b.shp_trx_rowid
                AND a.c_shp_inst = b.c_shp_inst
                AND a.f_tran_proc  = b.f_tran_proc 
                AND b.f_ltr_received = 'D'
                AND f_rec_code IN ('G', 'W')
                AND b.f_rec_status = 'B'
                AND b.c_shp_inst = :b1
                )
     AND a.c_shp_inst = :b1
     AND a.f_ltr_received = 'D'             -----------------> part of composite index
     AND a.f_tran_proc  = 'N'              -----------------> part of composite index
     AND a.f_rec_code IN ('G', 'W')      --------------> part of composite index  
     AND a.f_rec_status = 'B';              -----------------> part of composite index  

  This UPDATE takes a long time to run and sometimes get hung up.
  
  We have a composite index on four columns f_ltr_received, f_rec_code, f_rec_status and f_tran_proc. Explain the plan shows that this composite index is used.
  
  
  
  Any way to rewrite this query or suggestion?

  Steve_74 wrote:
  DB version: 11.2

  We have a table called SHP_GC_TRACK, which has about 8 million records with partitions. In the below UPDATE, it updates a column based on the SELECT on the same table in a subquery.

  UPDATE shp_gc_track a
  SET f_tran_proc  = 'Y'
  WHERE last_update_date <
  (SELECT MAX (last_update_date)
  FROM shp_gc_track b
  WHERE a.shp_trx_rowid = b.shp_trx_rowid
  AND a.c_shp_inst = b.c_shp_inst
  AND a.f_tran_proc  = b.f_tran_proc
  AND b.f_ltr_received = 'D'
  AND f_rec_code IN ('G', 'W')
  AND b.f_rec_status = 'B'
  AND b.c_shp_inst = :b1
  )
  AND a.c_shp_inst = :b1
  AND a.f_ltr_received = 'D'             -----------------> part of composite index
  AND a.f_tran_proc  = 'N'              -----------------> part of composite index
  AND a.f_rec_code IN ('G', 'W')      --------------> part of composite index
  AND a.f_rec_status = 'B';              -----------------> part of composite index  
  

  This UPDATE takes a long time to run and sometimes get hung up.

  We have a composite index on four columns f_ltr_received, f_rec_code, f_rec_status and f_tran_proc. Explain the plan shows that this composite index is used.

  Any way to rewrite this query or suggestion?

  Setting updates with subqueries may be difficult: (.) Unfortunately my suggestions below are of the try-it-and-see-what-happens variety - nothing of certain

  First of all, check the index. Is it bitmap or tree? If the tree to see if the more restrictive columns are listed first - this can help with effectiveness of b-tree indexes. Also if the tree a composite bitmap for columns with lots of repeat values instead could help

  Its a correlated subquery so that you cannot run just the subquery first put the result in a scalar varaiable and using the variable in the SQL instead. You can try putting the keys w/join subuqery results in a TWG first to use TWG in SQL to see if I/O is reduced together during these two operations.

  You have the license for the parallel query option? Using parallel DML (this must be activated manually) can help. Check the documentation of the ALTER SESSION command to do so. In addition, the PARALLEL_INDEX() indicator could help

  Display the SQL execution plan

• How to run a query to update on the results to a spreadsheet

  Hey there,
  I'm new to this kinda thing.
  I received a spreadsheet that has 2 tablets, 1 is called SQL generates and has a ton of data. 1 is called SQL statement and a select statement in the first cell.
  I said to run an update query by using the worksheet and received this:
  = CONCATENATE("Update CARDMEMBERISSUE set CURRSTATUSCD = 'ACT', DATELASTMAINT = sysdate where AGREENBR =",A2,"and MEMBERNBR =",B2,"and ISSUENBR =",C2,";")
  
  = CONCATENATE("Insert into CARDMEMBERISSUEHIST (AGREENBR, MEMBERNBR, ISSUENBR, EFFDATETIME, CARDSTATCD, STATREASON, DATELASTMAINT, DATESENT) values (', A2, ',', B2, ',', C2", sysdate, 'Law', null, sysdate, null);' ")
  
  I don't know what to do or how to do this.
  It's that the lines in the worksheet as look, including the column header, A1 is empty.
  A B C etc.
  NBR MEMBERNBR QUESTION NBR CURRSTATUSCD PREFIX CARD NBR AGREETYPCD NBR EXT CARD ISSUE DATE PERS OWNER AGREE
  2 12 1 44 ISS g 22 22 19/10/2011

  = CONCATENATE bits are Excel formulas. Assuming that they properly drafted, they generate a set of individual sql statements. The first concaenatewill generates a set of instructions to update on the CardMemberIssue table, and the second will generate a set of insert statement in the CardMemberIssueHist table.

  You should be able to simply paste the instructions generated in any tool that you use to run sql to run. Before you do this right, make sure that you are running:

  alter session set cursor_sharing=force;
  

  before sticking anything in.

  John

• I need sql query to discover the 5 last update on the back-end oracle

  Hi all

  I have payable obligation under Oracle, I want to know the last 5 updated to the oracle of in the back end. the table of this 'AP_SYSTEM_PARAMETERS '.

  Please suggest me

  Kind regards

  Patel

  Hello

  There may be other ways, but for the time being to check this...

  Select *.

  from (select * from ap_system_parameters by last_update_date desc)

  where 1 = 1

  and rownum<>

• update of the lookup using the fusion query table

  Hi Experts,

  My requirement is, we have total 4 tables called x, y, z and a_lookup table. join between these tables column is deptno.

  I need to update a_lookup table based on less than the conditions of the

  condition1: table a_lookup update with the corresponding records of X and Y

  condition2: If there is no record in X does not match, then we have to compare with Z and update the table a_lookup accordingly

  Here is the table scripts and my attempt as well.

  Only doubt is, is my fine appearance of MERGE statement, or is it otherwise better update the a_lookup table?

  Please share your ideas on this.

  create table x (empno, deptno number);
  

  -Samples

  Insert into x
  Select the level, level * 10 double connect by level < = 10;
  

  create table y (empno number, number deptno).
  

  -Samples

  Insert y
  Select the level, level * 10 double connect by level < = 5;
  

  create table z (empno number, number deptno);
  
  -Samples

  Insert into z
  Select the level, level * 10 double connect by level < = 10;
  

  create the table a_lookup (empno number, deptno_lookup number);
  

  -Samples

  insert into a_lookup
  Select null, level * 10 double connect by level < = 10;
  

  -Merging of records in a_lookup based on X, Y, z. using right outer join on X and Y

  Fusion in a_lookup one

  using the ((select x.deptno, x.empno from x, y where x.deptno = y.deptno)

  Union of all the

  (select z.deptno, z.empno in z, (select x.deptno from x, y where x.deptno = y.deptno and y.deptno is null) res1)

  where z.deptno = res1.deptno)

  ) res

  on (a.deptno_lookup = res.deptno)

  When matched then

  update set a.empno = res.empno;

  See you soon,.

  Suri ;-)

  Like this

  Fusion in a_lookup one

  a_l'_aide_de)

  Select deptno nvl (a.deptno, z.deptno)

  empno nvl (a.empno, z.empno)

  z

  left

  Join them)

  Select x.deptno

  x.empno

  x

  left join y

  On x.deptno = y.deptno

  where y.empno is not null

  ) a

  On z.deptno = a.deptno

  ) b

  on)

  a.deptno_lookup = b.deptno

  )

  When matched then

  update set a.empno = b.empno;

• I get an 80070663 error when installing an update on the computer.

  Original title: impossible to install KB2687499 on Windows Vista

  The microsoft Installer Update continues to detect sequences of security update Microsoft Office (KB2687499) 32 - bit Edition if necessary to install on my system and continues to fail.  So I downloaded the update manually, but when I run it, I get the message: "Please wait while the update detection is to be run." and then I get the message "an error has occurred during execution of detection."  I called the Help Center (SRX1193068976ID) and gave them the windows update 80070663 error code.  The representative sent the following links:

  < your="" answer="" tech="" thought="" you="" might="" find="" these="" links="">
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-80070663/869d5ea6-9892-4273-A43D-26ee4f42efe2

  http://support.Microsoft.com/kb/913754

  I followed all the instructions and I can not yet solve the problem.  Any help would be greatly appreciated.

  Thank you
  PAM

  Hi Pam,.

  Thanks for posting your query in the Microsoft Community.

  You have a problem with the installation of an update on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) what is the exact error message?

  (2) you are able to install other updates on the computer?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 1 and 2 require changes need to be made in the register. You must back up the registry before you proceed.

  I would have you look at the article-

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2-

  I would have you look at the article-

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Note: The Chkdsk scan will try to identify and repair bad sectors on the hard drive. All the data on these areas could be lost in the process. The computer can also enter a no start condition.

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• Request concerning the sequence of updates for the Windows Update client in 2015

  I posted a query similar to this on a Microsoft Technet forum, but I have not yet received a response to the specific question that I asked.  I'm trying so this forum.

  I am running Windows 7 Home Premium SP1, but I did not intend to accept the free update of Windows 10.  I don't use automatic updates.  I use Windows Update manually and select the updates to install, even for these updates identified as Important.

  Since April 2015, there was a sequence of updates for the client Windows Update on Windows 7 (Windows 8).  I have the Windows 7 of those below list:

  KB2990214 (April 2015)

  KB3050265 (June 2015)

  KB3065987 (July 2015)

  KB3075851 (August 2015)

  KB3083324 (September 2015)

  KB3083710 (October 2015)

  KB3102810 (November 2015)

  KB3112343 (December 2015)

  (This list is probably less intimidating than it looks because the replaced October update Update September, which replaced the August update, which replaced the July update, which replaced the June updated.  "There are therefore basically just 4 updates.)

  The big question is, given that Windows 7 is available for several years, why, all of a sudden, there was this sequence of updates for the Windows Update client?  Because these updates began to occur at the time when the offer of a free upgrade to Windows 10 was announced, I could be forgiven for thinking that all of these updates are really directed towards the relaxation of the upgrade to Windows 10 via Windows Update, and that there is little or no advantage to systems that are not upgrading.  I am mistaken in this belief?  If not, precisely those who will benefit from my system, even if it is not upgraded to Windows 10?

  The updates that I currently installed, depending on the installed updates, are KB2990214 (April 2015), KB3075851 (August 2015), KB3083324 (September 2015) and KB3083710 (October 2015).

  In my view, there was a lack of transparency in the descriptions of these updates in the KB articles.  And, in one or two cases, information on the importance of an update in the article and in Windows Update has been inconsistent.  It would have been much clearer if each KB article stated for NOT upgrading to Windows 10 systems, if the update to the Windows Update client is important, as an option or completely irrelevant.

  Hello, Tiberius.

  Thank you for your response.

  I'm sorry for the late reply.

  I appreciate your time and your concern.

  You can read this article and check if it helps.
  Next update to Microsoft Update Client
  http://blogs.technet.com/b/Mu/archive/2014/06/24/upcoming-update-for-Windows-Update-client.aspx

  Please keep us informed.

  Thank you

• After installing Windows 7 using MDT, Windows displays the message "Windows Update cannot currently check for updates because the service is not running.

  Hi all

  I worked on creating a better system for my business get an OS up-to-date with all the required software, settings, and drivers. I have previously using WDS as autonomous and just syspreping images and pushing them up until he became incoherent and corrupting of the parts of the image. I did a little surfing on the web and discovered that many computing professionals use MDT to produce images of quality with all the customization they need. So that's the problem.

  The image works fine. I'm able to customize the way in which I need to and get most of my successful deployed pilots (problem with trackpad drivers), but the error message I get when I try to run a windows update is "windows that update cannot currently check for updates because the service is not running." After I received this message I check my services and it shows the update of Windows running service and long-term as well running services. Tried to restart as suggested and still no results. Undertook research for a possible fix and still nothing.

  Any help?

  It became quite a headache for me. Thank you guys

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the installation of Windows Update.

  If you your computer are connected to a domain network?

  If Yes, then post your query in TechNet forums because they have more expertise in this issue to help you better. Please follow the below link to do the same.

  T echNet Forums for Windows 7 
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

• Trouble installing the update of the BIOS on hp chromebook 13

  When I try to download the update of the BIOS for my chromebook 13 hp, it will start to install because the HP Wizard Installer does not work correctly. It just keeps telling me to try the Setup Wizard again at a later date whenever I click on run/save the update. How can I make this?

  Hi Benjamin,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, you can not install the BIOS update. The question could be if some restricted to settle security software or third party services/application is limiting.

  I you suggest to perform the clean boot and then try to disable the security software temporary, if any installed on your computer and then try to install the update to the BIOS.

  Step 1

  Perform clean boot.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: refer to "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Step 2

  Temporarily disable security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Step 3

  After completing both steps now try to install the update from the Web site of the manufacturer (HP) and see if it helps you to install the update.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Failure of the update of the form of the IOM process | Error: Could not execute database read

  Hello

  I encounter the following error when I try to create a new version for a form of OIM Design Console process:

  Description: Could not run the database to read. The database has encountered a problem with the specified SQL query. Solution: Check the database query. Contact your system administrator.

  It does not matter that I use xelsysadm or any system administrator account.

  Details of the environment:

  OIM 11g Release 2 (11.1.2.1.0)

  
  

  
  

  Errors in the logs: (despite following errors I can update IOM DB Tables with SQL through SQL Developer queries)

  
  

  "Class/method: DBPoolManager/getConnection/Exception a few problems: Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: cannot get data source connection: java.sql.SQLRecoverableException: IO error: the network adapter could not establish the connection"

  
  

  Class/method: DBPoolManager/getConnection/Exception encounter a few problems: error connecting to database recovery. Please check the following

  
  

  Class/method: tcDataBase/writeStatement encounter a few problems: ORA-01407: cannot update ("PRD01_OIM". » « « « SDK ». » SDK_SCHEMA') with the NULL value

  
  

  Class/method: tcTableDataObj/updateImplementation a few problems: {1}

  
  

  Class/method: tcDataBase/rollbackTransaction encounter a few problems: Rollback performed

  
  

  Class/method: tcDataObj/save error: wrong to save SQL operation

  
  

  Please let me know if you have any suggestions.

  
  

  Thank you.
  

  
  

  I found the solution!

  I was going through this blog: OIM 11 g: error after startup server IOM: retrieve the connection at the base

  In the last comment by Amit, he mentioned that the settings IOM - config.xml must be changed.

  So I discovered that IOM-config file. XML from my environment, under directDBConfigParams, url (jdbc thin driver) was wrong because of cloning.

  In addition, OIMFrontEndURL, RMI and SOAP URL were wrong.

  I corrected the and guess what... each utility works...

  However, you don't have to import/export the config of MDS file... you can change these details in the following MBEANs

  1 DirectDB

  2. the discovery

  3 SOAConfig

  > Reboot the server of the IOM.

  I knew this jdbc driver was not, but did not know where to set it up.

  I have listed the error in my last comment, so that if anyone has this problem, the text of this presentation would help.

  Thank you.

• Hi I am new to Oracle forms and reports I want to know the differences between the Enter query mode and Normal mode?

  Hi I am new to Oracle forms and reports I want to know the differences between the Enter query mode and Normal mode?

  Welcome to Oracle Forms!  Out of curiosity, what do you mean by 'new '?  You are a student or new to an organization that uses Oracle Forms?  Or just play with Oracle Forms to learn something new?

  Let me start by saying that many of your questions designtime can answer by searching in the help of the constructor of the form library.  It's accessible, like most of the other products in the Builder menu > help.

  Regarding your question, ENTER QUERY mode, as the term implies, is when it is in a State where it is accept input for the execution of a query.  When in this mode, there are various restrictions.  Yet once, it will find more details in the Builder Help.  In this case, search help for these two subjects, "SYSTEM." MODE'and "built-ins comments that are not allowed in the input query Mode".  There are many other pages that contain information about the ENTER_QUERY method, but these two should help you get started.

  Normal mode, as its name implies, is when it is in a State of 'normal '.  Basically to do nothing in particular, but also not in ENTER QUERY mode.  In this State, you can move the shape, INSERT, UPDATE, DELETE, documents, etc..

  You will find additional information, as well as a lot of documentation on the product page of forms of OTN:

  http://www.Oracle.com/technetwork/developer-tools/forms

• A statement UPDATE changes the line if the update changes the column even value?

  HI -.

  I have a main classification and the corresponding audit table. I have a trigger. I created using the suggestion:http://www.runningoracle.com/product_info.php?products_id=211

  Now the problem that I am facing is that: if I run the same query (same value) update on the main table for n times (with the same data)... my audit table is updated with a new record every time. He is not able to determine that the value is the same.

  My goal is to load the audit table data if the value in a cell in the main table is really have changed.

  A statement UPDATE changes the line if the update changes the column even value?

  Best regards

  I have a main Table and the corresponding Audit Table. I have a trigger. I created using the suggestion:http://www.runningoracle.com/product_info.php?products_id=211

  Why?

  You try to resolve what made you what are the PROBLEM that select as the solution?

  Now the problem that I am facing is that: if I run the same query (same value) update on the main table for n times (with the same data)... my audit table is updated with a new record every time.

  Yes - it is EXACTLY what you say that you wanted to do and EXACTLY what the code does in this article.

  He is not able to determine that the value is the same.

  I think you mean that the code does NOT check if the value is the same. You can certainly change the code to do this check. But I have a question to start with your need for such a solution.

  My goal is to load the audit table data if the value in a cell in the main table is really have changed.

  OK - then modify the code to check EACH COLUMN and compare its NEW value to the OLD value and insert only the table of audit if SOME (or columns you care specifically) have changed.

  A statement UPDATE changes the line if the update changes the column even value?

  It depends on what you mean by 'change the line '. Of course to update a column with the SAME value does not change the resulting data value.

  But the physical structure of the line, the location of the pieces of line and information in the header block (YVERT, etc.) will change. And, as others have said Oracle doesn't know and doesn't care, so if the new value of a column is the same as the old value will create redo, undo and the rest.

  Start over and tell us what PROBLEM you're trying to solve. Then we can help you find the best way to solve it.

• problem with bind variables in the SQL query view object

  Hi all

  I use JDev 11.1.2.4.0.

  I have a problem with bind variables in the SQL query view object.

  This is my original SQL

  SELECT sum(t.TIME) , t.legertype_id
  FROM LEDGER t
  WHERE t.nctuser_id = '20022' 
        AND to_char(t.insertdate,'YYYYMMDD') in ('20130930','20130929')
  group by t.legertype_id
  

  In my view .xml object query tab, I am writing this

  SELECT sum(t.TIME) , t.legertype_id
  FROM LEDGER t
  WHERE   t.nctuser_id = '20022'
      AND to_char(t.insertdate,'YYYYMMDD') in :dddd
  group by t.legertype_id
  

  Davis here is a variable of Type liaison: String, updatable and necessary.

  I try to deal with Davis as ('20130930 ', ' 20130929') hoping the view object, run as my original SQL.

  But failed. The view object retrieves 0 line after that I run.

  Why?

  Thank you! ('2original SQL0130930', '20130929') ('20130930 ', ' 20130929')

  A variable binding cannot be used as this is why you must use years table. Check decompilation binary ADF: using oracle.jbo.domain.Array with ViewCriteria to see a solution.

  Timo