Update Ultra-DMA to SATA-2

Similar Questions

• Ultra-DMA 66 on Tecra M5?

  Hello

  Some software of tewaking is an option to enable Ultra-DMA 66 on shipset intel. Ultra-DMA I know reduces the CPU usage when you access the HD. This usually means a more responsive OS. It is always a setting that I don't want to mess with unless I'm 100% sure, that it will not mess with my system. I remember in the last of the problems with the desktops and Ultra - DMA.Probably because wilt HD ot the chipset controller couldn't take it.

  So my question is... done Tecra M5 (51st version) supports Ultra DMA66... and it's a good idea to enable it in windows xp?

  Thanks in advance.

  see you soon

  Seems that you are not allowed

  UDMA-> court for access to the memory of Ultra-Direct
  It is a protocol for a standard ATA and it controls the speed of data transfer between a drive HARD ATA (IDE) and the controller of the motherboard!

  As you say than UDMA and DMA to transfer data from the HARD drive to RAM by using the DMA controller on the CPU.

  But please don't compare any old desktop computer with mobile technology. Tecra M5 is a mobile generation. Tecra M5 supports SATA HDD! Holders of host controller Serial ATA (SATA) integrated (2 profits, 150 MB/S)

  AND the integrated IDE controller supports Ultra ATA 100/66/33.

  To return to your question;
  Tecra M5 uses U-DMA66 and faster! You can use hard disks that support U-DMA100

  I hope that I was clear enough

• Boot my PC, I get a black screen that says ultra dma mode-6 s.m.a.r.t capable.

  When I start my PC, I get a black screen that says ultra dma mode-6 extended s.m.a.r.t. capable but disabled keyboard interface error press fi to resume when I do that it starts as normal, when I posted e logitech about this they said: enable smart in bios and save.  I can't remember if they said it was a hard drive or a hardware problem, how can I go to the bios either no matter what.  I have a keyboard and wireless mouse

  Thanks M Clark

  Hello

  I suggest to reset the default settings to default and check for the issue.

  You may also contact the manufacturer of your BIOS to change these settings.

  Important note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   

• Update the BIOS on Sat A60 - error box appears

  I need help please? I just downloaded the latest version of the bios for my A60 PSA67E, who is 1.90. I registered and then extract the files, then it is said to run. The extracted file shows an open with osaka 20v190 on this box. I used extract right click and select run but then an error box comes up saying failed to load the driver.
  I have running in SafeMode with networking, what's the problem?
  Can someone help me? I need to update as soon as possible.

  Hi Ray

  BIOS update as soon as possible? What is the problem with this device?

• Update hard drive - PATA, SATA

  Hello

  I want to improve my computer hardrive laptop (HP Pavilion 8140US). I think that the existing hard drive is a PATA drive. I want to know if I can improve it with a SATA drive. If yes then that all I have to do. Let me know. Thank you.

  You can not. You have to go back to a PATA hard drive.

• dv7t-7200 CTO Quad Edition Notebook PC - errors after 8.1 update update and HP

  I have a HP ENVY CTO 7200 dv7t Quad Edition Notebook PC
  Product number: B6B75AV

  Originally from Windows 8 Pro with Media Center 64-bit

  Upgrade to WIndows 8.1 via the shop
  Everything seemed OK

  HP Support Assistant eliminated 2.1.0.1002Ap4 contained in SP58398 which has updated the driver Intel Rapid Start Technology.

  (A) after the start, I now get an office messages "your system seems not to have Intel Rapid Start with technology."

  (B) if I start the Intel Control Center, I get the message "there is currently no application filed.

  (C) if I start the Intel Rapid Start Technology Manager, also get "your system seems not to have Intel Rapid Start with technology."

  (D) also, if I try to use an application to read data S.M.A.R.T, which also fails

  (E) However, I get the info of PassMark DiskInfo:
  SysInfo DLL Version: SysInfo v1.0 Build: 1041
  Export: 16:18:18 November 18, 2013

  The device information:
  Device ID: 0
  Interface: RAID
  Capacity of the apparatus: 715402 MB
  Serial number: {information}
  Model number: ST750LX003-1AC154
  Firmware revision: HPM1
  Sheet music:
  N/A

  The ATA information:

  Geometry of the disk:
  Cylinders: 0
  Tracks/cylinder: 0
  Sectors/track: 0
  Bytes/sector: 0
  Total of the sectors of the disk: 1465149168
  Logical sector size: 512
  Physical sector size: 4096
  Media rotation speed: 7200 RPM
  Buffer size: 0 KB
  The ECC size: 4 bytes

  Compliance with standards:
  ATA8-ACS taken in charge: Yes
  ATA/ATAPI-7 taken in charge: Yes
  ATA/ATAPI-6 supported: Yes
  ATA/ATAPI-5 support: Yes
  ATA/ATAPI-4 taken in charge: Yes
  Series/parallel: Serial
  SATA 3.0 Compilance: No.
  SATA 2.6 Compilance: Yes
  SATA 2.5 Compilance: Yes
  SATA II: Ext Compilance: Yes
  SATA 1. 0a Compilance: Yes
  ATA8-AST Compilance: Yes
  World wide ID: 5000C5005DF1063B

  Feature support:
  CHIP supported: Yes
  CHIP enabled: Yes
  SMART taken self-test supported: Yes
  SMART error log supported: Yes
  Taken LBA supported: Yes
  Taken IORDY supported: Yes
  CFast taken in charge: No.
  Taken DMA supported: Yes
  DMA multi-word maximum mode supported: 2
  DMA multi-word selected: None
  Ultra maximum DMA mode supported: 5
  Ultra DMA is selected: 5
  Maximum PIO mode supported: 4
  SATA compliance: Yes
  Supported NCQ priority information: No.
  Unload while NCQ commands are exceptional supported: Yes
  The event of PHY counters supported: Yes
  Application of sustained power management: No.
  Set of features taken NCQ support: Yes
  SATA Gen2 signaling speed (3.0 Gb/s) supported: Yes
  SATA Gen1 signaling speed (1.5 Gb/s) supported: Yes
  Software Settings Preservation: Supported, enabled
  Provision of data in the order: unsupported
  Initiate power management: supported, Enabled
  DMA Setup self-actuation: unsupported
  Buffer of zero offsets: unsupported
  Trusted Computing taken in charge: No.
  Host Protected Area (HPA) taken in charge: No.
  Read-ahead support: Yes
  Predictive read enabled: Yes
  Support for write cache: Yes
  Cache write-enabled: Yes
  Power management support: Yes
  Security mode supported: Yes
  Security mode is activated: no
  Device Configuration Overlay (DCO) taken in charge: Yes
  Supported 48-bit addressing: Yes
  Auto-acoustic management (AAM) supported: No.
  Start standby (THEN) supported: No.
  Advanced Power Management (APM) taken in charge: Yes
  Advanced Power Management (APM) enabled: Yes
  Current level of APM: Minimum energy without waiting
  CompactFlash Association (CFA) taken in charge: No.
  General Purpose Logging (GPL) taken in charge: Yes
  Streaming support: No.
  The media card support through: No.
  Supported power conditions extended: No.
  Scope of supported status reports: No.
  Writing-reading-check supported: No.
  Supported free-fall control: No.
  TRIM command support: No.
  SCT command transport supported: Yes
  NV Cache enabled: no
  NV Cache support power management: No.

  SMART ATTRIBUTES:
  ID Description status worst threshold value TEC gross
  ---------------------------------------------------------------------------------------------------------------------------------------------

  Any ideas what is it?

  I tried to save the patch that HP has pushed out, but I didn't, my system state would be if I did.

  Any ideas?

  Thank you!!

  xzr1tv

  Install the new BIOS F29 with

  Supports the feature of Intel iRST systems

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124651-1&cc=us&DLC=en&LC=en&OS=4132&product=5328068&sw_lang=

  Intel Management Engine Interface driver

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-124055-1&CC=de&DLC=de&LC=en

  Update the RST

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng

  Chipset

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=20775&ProdId=816&lang=eng&OSVersion=Windows%208.1 * & DownloadType = drivers

  Check your settings in Bios of RST

• Satellite A100: How do I enable SATA NATIVE mode

  Hello, my laptop Satellite A100 PSAA9 and the southbridge is an ICH7M
  I put an SSD in my laptop and the drive controller is locked-> Ultra DMA 6 IDE compatible mode.
  I would switch to the native SATA-1 to increase the bandwidth (from 110 MB/s-150), but I can't find any setting so that, in the last BIOS 6.00

  I think that maybe in the past, Toshiba has enable this feature, but I suppose they might have turned it off for beginners who don't know how to install the SATA drivers during the installation of Windows.

  I found Toshiba BIOS database, but it is locked by a password.
  I'm willing to test any BIOS that could re - enable native SATA mode

  + The message was edited: link has been removed - unauthorized +.

  Hello

  You need the native SATA controller?

  The laptop was equipped with a controller SATA interface supports the Serial ATA Rev. 1. 0a.

  Some laptop models take a BIOS that contains a SATA mode option.
  This option can be changed on AHCI or in compatibility mode.

  But as far as I know a100 BIOS does not contain these settings

• Re: Satellite A300 GN1 hhd PIO mode by default... problem need to DMA

  Hello I have a problem with Ide channel. I reinstalled Vista to xp, in the bios sata option is set to "compatibility" and I can't change hhd to ultra DMA... Here is the photo http://img386.imageshack.us/my.php?image=65634705sv6.jpg
  my pc is running very slowly... maybe someone knows how to change pio to DMA mod?

  Sorry for the bad English

  Wait a minute: you use Vista and Windows XP Home edition or you installed Vista only? I didn't understand exactly what you wrote.

  If you are using Vista just go to BIOS settings and set SATA controller in AHCI mode. After restarting Vista several AHCI drivers will be installed and Vista work well will win.
  If you use two operating systems, it can be problematic, because you can not set on AHCI back. You will get the blue screen after each start up Windows XP Home edition.

• Update hard disc on Satellite L20

  Hi all

  I would like to change the hard drive of my Satellite L20-260...
  I installed a hard MK4026GAX drive, I would like to replace it with a bigger... by taking a peek on the internet I found hard drives as MK8032GAX...

  Yes, 80 is the size (80 GB) but 32 what means? Can someone tell me is this hard disk can replace my old (one broken too) a?

  Hello

  I put t knows what means the 32 at the end of the number, but the disk HARD of MK8032GAX supports Ultra DMA/100 (ATA-6) interface.

  To my knowledge the Satellite L20 260 supports serial ATA (SATA) interface.
  You must use the s HARD drive that supports this and don t buy HARD drive that supports IDE interface because you will not be able to connect it to the laptop.

  In addition, the compatibility of the BIOS is very important. In many cases, the BIOS cannot recognize the HARD drive because of the large size.
  According to your post, the laptop supports 40 GB HDD s. In my opinion the 80 GB should work and should be recognized.

  I recommend to visit the merchant of HARD drive in your area and ask for compatible HARD disk. Maybe you would be able to test it in the shop.

• Sat. 1400-503, SD-R2102 drive: IDE ERROR #1, cont.

  Hello.
  Therefore, even after the firmware update (1400-503 drive, SAT SD-R2102). Original firmware was 1316, after changing to 1W16, an error message is displayed. The firmware update program cannot return to the previous state, bcs is displaying the message: not found disk ATAPI. Can anyone help?

  Hello

  Just for Info:

  The first two letters are important... They represent 'the family' as 10XX, 13XX and 17XX are Toshiba original firmware. 1QXX are Compaq. 1DXX are Dell and so on...

  Finally, two are actually version. The more means more new version. But they are the exceptions a...

  You should never Flash your drive with the firmware of different 'family '. By example, if your firmware is currently 1015 should never flash at 1 Q 24 since your disk may not work more after the blink...

  Good bye

• No Sata 3!

  Dear Sony,

  I am line of Sony very disappointed computers laptops all Sata 3 are disabled if its for series E, S or Z, I had high hopes for your laptop, and now that I've experienced this first hand. I plan to return it. In the hope that the future models and future bios on these laptops, it will be updated to enable the Sata 3.

  My laptop is the SVS13A12FXS! I loved every moment when I got the laptop until I discovered that Sata 3 has been disabled and my SSD drive, I put in the laptop will never work to its full potential!

  SVS13A12FXS

• Satellite Pro L300: BSOD after updating BIOS

  Hello

  After updating the Bios of the Satellite Pro L300, windows will not start!
  His show the blue screen of death!

  What can I do?

  Hello

  You are able to access the BIOS settings?
  I m not very well why this BSOD appears, but eventually the SATA mode settings have been changed after the BIOS update

  Usually the SATA mode must be on AHCI if the SATA drivers are installed.
  But if the SATA drivers are not included the SATA mode must be set to compatible.

  Please check this!

  In addition, you could set the BIOS default settings and may try to start the computer again.

• Aspire One 722 just took out of box will not connect to windows update.

  I have 2 identical Aspire One notebooks 722 running AMD chipsets running Windows 7sp1 pro.                              (SNID [redacted to comply with guidelines]) that does not connect to update the window. I have the built-in System Restore on a single noteboook to see if that would fix it. It there no. This is the news, I had them on the Board for the protection of labour. I tried for a month now to get Microsoft updates to work.

  I tried all the fixes and the tools I find on the net and within Microsoft to get updated to work and have had no sucsses.

  I even went as far as buying a new hard drive and a new copy of Microsoft windows 7sp1 drive still does not work.

  Everything elese works fine I can join any network at work. Surf the web, download electronic music or programs. No problem at all with the part of it. I get no error message or it is just to update program and the bar just moves a day if I let him. I do it all the patches from microsoft, they say that all is well, or fixed and still nothing.

  Think it's strange that a new disc of win7sp1 with a new HD it still does not work. I'm at my wits end.

  Anyone out there have the magic bullet miss me?

  Sure could use some help on this. No I won't update to WIndows 10 and forget about it. Ha ha

  Well @ 12:10 CST, I learned that I had 205 updates installed plus 5 in option.

  So it is now was the installation of updates since then.

  So, it does not. In the review I, that I did not did nothing before.

  This time, I did a clean installation of the operating system. Installed all the latest drivers. A through the online activation.

  Click updates in short order says something about downloading a new engine update. Screen went white and Brown a few times. Back to update sceeen were he sat running for approximently 12 + hours. Then, the notification of the necessary updates. And now it's @ 65 of 209 updates (installation)

  When this is done, I will do the same to the other laptop and hoping for the same results.

  Thanks to everyone who gave me advice here. It was great to have you share your knowledge and your encougment.

• Connection USB Z2 Xperia is not detected (after trying to update Lollipop)

  Hello world:

  I get in most of the topics here, including (USB connection problem FAQ), but not found an answer to my problem. Find the post suggestions when you type the message topic a little clever novelty...

  Well, I was happy to receive my mail yesterday regarding my availability of update available Lollipop Z2. SAT, open PC Companion on my Windows 7 laptop, make a backup of the settings (without photos or apps) and then to receive the update.

  PC companion asked me to keep the phone unplugged, and that it would notify when connect me (Nice also)...

  I started the download, but apparently the laptop came into fashion 'sleep' (not plugged into the wall), which was another reason for not having the phone connected (because of Z2 battery drain charge up to 100%)

  The rest is blurry, but when I woke up the laptop, it stopped downloading at 51% and extending the.

  A method to restart the laptop, but when I tried to connect the phone... nothing. Well, he is never detected by the laptop. Wireless Media Transfer option was still working, but it would not download the update (as if the USB connection is required). Tried to install it on another PC (with administrator privileges) and no go.

  Never started phone update... works perfectly with this exception. PSG, MSC, USB debugging, nothing works). Helium does not work. Nothing!

  I'm kind of crazy, since the update of the pacifier is not destructive (no fading phone data), but it seems that I will probably need to reset the phone.

  Help, please

  Well, it seems that the problem is intermittent, as the PC has detected the phone and I was able to update to the pacifier. So.will hardware problem complete RMA. THANKS for all THOSE who have planted in. Please close thread.

• No option AHCI in the BIOS. DVD SATA as IDE burner.

  Hello, I am new to the forum and need advice, else why would I be here, no?

  I have a desktop HP Pavilion a610n with the AMD Athlon 3000 + CPU. I upgraded from XP to Windows 7 Home Premium. I borrowed an IDE DVD drive to install the new system because the original HP drive stopped working.

  After installation, I bought a new 24 X Multiformat DVD Writer (DVD 1270i HP) and connected on one of two SATA connectors on the motherboard (since both tried) and bought an adapter for the power supply connection (4-pin Molex to 15-pin SATA). Start the computer and the device has been installed and all seemed well until I put an audio CD in the drive and it just sat there with the ridiculous small icon rolling around. I tried a DVD in there then and it froze the computer.

  I then went in the implementation to see if there was an option to switch from IDE to SATA AHCI, but there isn't. In the Device Manager DVD appears as an IDE drive I think I need some sort of update BIOS to enable SATA support. HP support has no new BIOS download for this computer on their download page. Only XP is listed as an operating system.  My only option is to return the drive and get an IDE model?

  Sorry for the novel, but I tried to give a complete description of my attempts at resolution. Thanks for any advice you can give!

  Kernal Klink

  Kernal, welcome to the forum.

  I checked the specifications of the product for an update of the BIOS. There is an update of the BIOS, but it is only for XP Home Media Center. The BIOS is dated 25/08/2005. It wouldn't fix all problems you encounter at this stage. You can try to reinstall XP and do the BIOS update, but as I said, it does not seem to fix all your problems.

  I think that I return the drive and save your money for a new computer. You have nothing to lose and much to gain.