Update will not turn on my phone

Similar Questions

• Satellite A200 - 1 GB block during the bios update - will not turn on

  Need help please, I was updating of the bios. And the process is stopped at: 2/18. I wait an hour and i decided to turn off the laptop. Know I can't turn on. Nothing happens. Anyone know how the recovery mode?

  Thank you

  (Sorry for my bad English)

  Josefa Hello,

  It sounds as if you of the BIOS chip was damaged during the attempt to update failed, and unfortunately this will prevent you from starting your laptop so that you can tyr to redo the update.

  In my view, that it will be necessary to bring or send the laptop to a Toshiba authorized service agent who has the equipment necssary to re flash your BIOS chip.

  Kind regards

• I have 6 phone is dead.  Will not turn back on

  I have 6 phone is dead.  Will not turn back on

  See Troubleshooting in the paper support. If your iPhone, iPad or iPod touch won't turn on - Apple Support

• my laptop will not turn on after a recent windows update

  Windows recently did an automatic update on my laptop and need to reboot to complete. However, it will not turn on at all now. I tried to run the install disc and used to attempt to repair my system and yet it is said that it is not repairable. Ive also tried to restore to a previous point, and yet, he won't do that. Help!

  Hello

  1. the updates are was?
  2. what exactly happens when you try to start the computer? You get the error message?
  3. What are the error messages that you receive when trying to run the system restore or Startup Repair?

  Step 1: Use the option last good Configuration see and check if you are able to boot to the desktop.

  Reference: http://windows.microsoft.com/en-US/windows-vista/Using-Last-Known-Good-Configuration

  Step 2: Check if you are able to boot into safe mode and send back the same.

• Xperia Z2 will not turn on - error message: software update failed

  Hi I would appreciate help! My Xperia Z2 aged for 4 months worked fine until today. It was connected to my Mac, and I was asked to update the bridge of Sony for Mac.. After about 10 minutes he said failed update on the computer. I unplugged the phone, but now the phone turns - all I get is an error message indicating "echec failed software update, make sure that your phone is connected to the computer and try again."

  However, when I connect it, the device is not recognized.

  I can not turn off the phone or, all that happens is a continuous loop of red light, then the error message (it is supported at the moment)

  Can anyone help?

  You should rather bridge of Sony.

• TREO 755 P HEEEEEELLLLLLLLLP! Phone will not turn...

  Lately my 755 p will reset on its own, but it always comes back to the top it's very annoying. Juice my phone reset itself again, but now it will not turn back. It keeps going back and forth between the 'electric access' screen and the "palm". I took out the battery and left for several minutes, but I still get the same screens. Anyone has any suggestions on how to fix this shit? I'm really starting to hate this phone.

  You will need to hard reset the unit. KB. Palm.com enter article 887

  Message relates to: None

• How to fix sucurity update for Windows xp (kb263317) NE WILL NOT TURN to DAY

  MY SUCURITY UPDATES WILL NOT UPDATE SECURITY UPDATE FOR WINDOWS XP (KB263317) PROBLEM. Help.

  This thread may be interesting:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/update-failure-kb263371-error-code-800700008/a70eb05a-1f49-4A64-9C4C-302bb622a95c

• installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online

  NEW HP computer bought in September, already updated to Windows 7 with HP upgrade kit. I installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online. Also can not get a pop window to activate by phone. HP says that I must fully restore Windows Vista x 64 Home Premium AGAIN at the factory all MICROSOFT updates, and THEN... so I can reinstall Windows 7 upgrade. Why now only after 30 days Windows 7 refuses to ACTIVATE! Nothing but run between Microsoft and HP > Please HELP without having to reinstall EVERYTHING on my computer.

  Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  -Online Windows XP: double-click the executable file to run the tool.

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  2. after running the tool, click the Windows tab and then click on copy to the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new post in the appropriate Microsoft Genine Advantage forum and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Tecra M9 - sometimes that it will not turn on

  Hello.

  I have a Toshiba Tecra M9 who has a problem. Sometimes it will not turn on. You must remove the battery and press the power button. When it loads will work fine until I have move or take it upward and then hangs and crashes. Then, you must take the battery out so he can turn it back on if it will be in all.

  I tried to reload xp, tried without battery, tried a known good ram in both slots, a different hd and took part to see if I can see something loose, I have now run out of ideas.

  any help would be good

  Thank you

  Hello

  Which is really strange, buddy... In my opinion, that sounds like a hardware problem, what do you think?
  You should contact a technician for laptop (authorized service provider). Guys can verify and Exchange defective equipment parts. Maybe a mailfunction of the motherboard or the CPU

  By the way: you have updated your BIOS? If this is not the case, to do this, first!

• I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

  I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

  Honestly, this sounds like a problem of carrier. Are you able to make/receive calls or send and receive text messages? I would first check with the carrier to make sure that your phone is still set up to use mobile data. Something was accidentally deleted when they merged your bills.

• K010 ENVY: my laptop will not turn off

  Hello

  When I shutdown/hibernate/standby/resume my laptop, it will die completely.

  All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

  And when I try to Hibernate, everything is ok, but I have the same problem.

  Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

  After manual turn off, when I turn it on again, everything works correctly:

  -If hibernation: OS will continue to last situation.

  -If start/stop: OS works normally without error or warning.

  After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

  Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

  Is there a parameter/software to check and fix my problem?

  Thank you

  Hello

  You are welcome

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• Windows Update will not end. ?

  Windows Update will not allow the installation of the updates.

  How to ask a question
  http://support.Microsoft.com/kb/555375 >

  It helps those answering questions if you provide:

  what version of windows (32-bit or 64-bit) and service pack level.

  you use what browser (exact version).

  what application or antivirus security suite is installed and your current subscription?

  What third-party firewall

  What anti-malware software can be installed.

  What updates you trying to install? (Number of KB)

  What error do you get everything when trying to install updates?

  A general solution, *IF* is no malware problem, would be to reset the update components:

  Access the KB article via Internet Explorer next (only) & run it in DEFAULT and AGGRESSIVE modes difficulty.

  How to reset the Windows Update components? http://support.Microsoft.com/kb/971058>

  Although this page States that this article does not apply to Windows 7, it does.

  The most effective way to use the Fixit above is to download, * except *, configure the system to boot, then run MicrosoftFixit 50202.msi and all first choose the default mode. Turn it back on.

  See if the system can update now. If no joy, run it again with the system connected to the internet, in aggressive mode. Turn it back on.

  See if the system can update now.

  Cancel the clean boot procedure, and then see if he can search for updates in Windows normal mode.

  How to configure Windows XP to start in a State of boot minimumhttp://support.microsoft.com/kb/310353>

  How to troubleshoot a problem by performing a clean boot in WindowsVista/Windows 7

  http://support.Microsoft.com/kb/971058>

  BTW, when a short "Windows Update" fix this "utility on this page, how to reset the Windows Update components?, the history of update file is deleted." This is why you don't see the update history even if the system can connect to Windows Update. Open the ReportingEvents.log located in Windows\Software Distribution to examine the history of update.

• MSN will not turn on it just says: upgrading, but the upgrade entirely custom install it... GETS about 58% then freezes

  MSN will not turn on it just says: upgrading, but the upgrade entirely custom install it... GETS about 58% then freezes

  Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  Your problem has nothing to do with the Windows Update feature. Contact MSN Support. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Microsoft Update will not work

  Microsoft Update will not run through Internet Explorer.

  I seem to encounter two different errors and there seems to be no trend about which error appears where or when or why.

  One is 0x800A138F: the site has encountered a problem and cannot display the page you are trying to view.

  I don't remember exactly what it was or said, but it was similar.

  I tried the solutions so far:

  -restart the computer, internet, etc.

  -added the Windows Update and Microsoft Update for Trusted Sites (I did years ago)

  -reset of Trusted Sites as the Internet zone settings

  -connected Microsoft Fix - It here: http://support.microsoft.com/mats/windows_update/en-us

  -a attempted to run the windowsupdate.diagcab from here: http://support.microsoft.com/gp/windows-update-issues?wa=wsignin1.0

  As with many other users of this forum, I can't run this .diagcab file. Looking at the many messages on this file, no one has yet solved anything. It seems that Microsoft has yet to recognize or acknowledge that they're providing a tool that is unusable. I hope I've provided enough information to lead to a resolution. I also sent a report through the Fix - It tool when it has not changed anything.

  Hello

  Please go to the Microsoft Community Forums.
   
  You did changes to the computer before the show?
   
  I suggest to refer to the links and follow the steps in the articles:
  Error message when you search for updates on the Windows Update site: "0X800A138F: there are no updates available at this time."
  http://support.Microsoft.com/kb/326253
  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
  Note: You should not turn off Windows Firewall unless you have another firewall enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
   
  I hope this helps.

• Unable to use wireless internet. In addition, my windows update will not be installed.

  Original title: extended error code = Oxfof4

  I have a couple of different symptoms. My laptop acts like it doesn't even have wireless capabilities although the exact model the same sitting next to her was a strong wireless signal (I still had internet capability on this laptop also). In addition, my windows update will not be installed.  I checked "Event Viewer" in system tools and have all sorts of errors. Error service Control Manager, "Warning b57w2k", code error Windows Update Agent and more. Still, the laptop doesn't move and accesses files, but no internet. I scanned with AVG and Malwarebytes 0 infection. Uugh!  Any suggestions?

  Many laptops have a switch that turns on or off the wireless radio.  This can be a physical switch somewhere on the laptop or a combination of the Fn key and one of the F keys.  Read the user manual for the laptop for more details.

  The warning includes "b57w2k" seems to be linked to a Broadcom NetXtreme 57xx Gigabit Controller (not wireless, wired).  You can click the copy (just below the up/down arrows) on the property sheet for the event and paste the content in your next post here.

  In general, the report that you have 'all kinds of errors' in Event Viewer is not very useful.  We do not understand what you're watching.