Update Windows 7 not configuration.

Similar Questions

• 8024A 000 - Windows Update code does not work and "installing Windows could not configure Windows to run on a hardware on this computer" for Vista64 reinstall

  I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit.  I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive.  When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code.  To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista.  When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer."  The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.

  The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material.  I even double checked that Vista is always enabled.  Anyone out there have any ideas?

  I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit.  I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive.  When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code.  To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista.  When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer."  The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.

  The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material.  I even double checked that Vista is always enabled.  Anyone out there have any ideas?

  Hey GMPete

  some posters have reported problems when replacing a drive hp etc. with a hp motherboard not provided player etc.

  I suggest tha contact you hp because it's their recovery process you use

  at the below link HP support forums

  http://h30434.www3.HP.com/

  link below is for direct hp support contact us

  http://welcome.HP.com/country/us/en/contact_us.html

  Walter, the time zone traveller

• Error code 0 x 80070424. Update Windows components are configured incorrectly.

  Original title:

  Windows Update will not work. I get error code 0 x 80070424. Update Windows components are configured incorrectly. How can I fix it?

  'Windows Fix It' found update components need to be repaired!  I can't run windows updates. I get error code 0 x 80070424.  Update Windows components are configured incorrectly.  How can I fix it?

  Hello

  1. Are what 'Windows Fix It' you referring?
  2. You did changes to the computer before the show?

  Method 1:

  You can follow this link & check if the problem persists:

  Error 0 x 80070424 occurs when you use Windows Update, Microsoft Update, or Windows Firewall

  http://support.Microsoft.com/kb/968002

  Method 2:

  You can run the fixit available in the following link:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  You can also follow this link & check if the problem persists:

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  I hope this helps!

• Windows could not configure one or two components of the system.

  I get this message after completing my update, Vista Home Premium 64 Vista Ultimate 64. All solutions?

  Hello

  1 you have a Windows Ultimate Upgrade disc, a complete edition of the full Windows disk or a Windows Anytime Upgrade disc?

  2 - is Windows XP or Windows Vista already exist on the computer before you install Windows Vista Ultimate?

  Currently, I suggest referring to the following troubleshooting article and thread:

  Windows could not configure one or more system components

  http://forums.Microsoft.com/technet/ShowPost.aspx?PostID=2409427&siteid=17

  Error message when you try to upgrade Windows Vista to a more advanced version of Windows Vista: "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.

  http://support.Microsoft.com/kb/946078/en-us

• ERROR: Windows could implement < name > (ad hoc)... error saying '"windows could not configure wifi'

  I'm not able to create an ad-hoc in my dell windows 7.

  He demonstrated an error saying "'windows could not configure wifi', where wifi is the name of my adhoc network."
  Kindly help.

  Hey Monty,

  What version of Windows 7 are you running?

  Go in Start > run and type winver to know. You must run Windows 7 Home Premium or higher in order to create an ad hoc network. Windows 7 Starter Edition cannot act as a server/host adhoc.

  I suggest you try the steps from the following link on how to create the ad hoc network.

  Set up a computer-to-computer (ad hoc) network
  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-computer-to-computer-ad-hoc-network
  Also check out the link:

  http://Windows.Microsoft.com/en-in/Windows7/setting-up-a-wireless-network

  Keep us updated with the result once you try the steps above.

• Windows will not configure my computer from recovery disks...

  I have a HP desktop computer and my hard drive failed.  I bought a new hard drive.  I tried to reinstall windows on the new drive using the recovery discs, I did when I first bought my computer.  It goes through the process of formatting and installation. Start Windows configure my computer.  After a few minutes, I get a message box saying "Windows can not configure your equipment for this computer."  When I click on the 'OK' button, my computer restarts and the process begins again. What should I do to make this work?

  Hello

  This problem occurs because Windows Vista cannot distinguish between ambiguous hard disks.

  In versions of Microsoft Windows Setup that are prior to the installation of Windows Vista, the hard disks are marked with distinct values to distinguish them. However, this method of distinction between the drives is no longer supported due to the risk of corruption of data on hard disks.

  • You have more than one hard drive connected to your computer?

  You can check this link:

  Error message when you try to install Windows Vista on a computer that has initialized the hard drives: "this computer's hardware can not supported booting from this drive.

  http://support.Microsoft.com/kb/925481

  Please post back and let us know if it helped to solve your problem.

• I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  Installed the new hard drive on my Toshiba laptop and when I ran my recovery disk, Windows Vista installed, but when I restarted computer I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  Help, please.

  Hello
   
  
  Your error message, the problem is probably caused by BIOS or DVD settings or bad cabling to SATA hard drive. Please do the following to narrow down because of the problem.
   
  (a) ensure that all laptops the same hardware, the same manufacturer and the same model.
   
  (b) upgrade the BIOS to the latest version; go into the BIOS and enable "Load Fail - Safe Defaults".
  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
   
  Warning of the BIOS:
  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
  
  (c) If you connect the SATA drives, please configure the SATA controller in compatible mode in the BIOS.

• "Installation of Windows could not configure windows to run on a hardware on this computer."

  I recently released and bought 4 hard to present itself as a raid 10 disks, now I use my motherboards onboard fakeraid an ihc10r. The cables are fine and when I try and install windows 7 (64 x pro) on each disk with raid and ahci disabled in the bios, windows installs fine. Now when I raid raid 10 disks windows install can see the drive and even then, I load the drivers just to be sure that iastor.sys etc. (I tried with and without) is the same every time after the first reboot, I get about 10 minutes and 2 minutes after the resolution of the screen is adjusted BOOM "installation of windows could not configure windows to run on a hardware on this computer."

  First of all, then someone please help me get windows installed on my raid?

  Second, microsoft, your error messages leave much to be desired, it does not yet add a message in the Setup error log.

  EDIT: Forgot to add that I did a memtest and it happened, I also have the piece of garbage jmicron on my MB off the power. In addition, the facility produces when the SATA controller is in AHCI mode, BUT not in raid mode.

  Seems to me that if the software/driver is not compatible Windows 7. Also if any of the readers have reminants of your installation for each individual unit, Windows 7 may not be able to deal with formatting during the installation process. Try to download CD bootable diagnostic of the manufacture in car and do two things.

  (1) check each drive individually for issues.

  (2) wipe the drive (WD can for example remove the first and last part of the training which completely removes the MBR and other reminants for the final result is the drive looks like you just removed from the box and plugged in for the first time.)

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Get updates windows default error configuration. returning from changes in Vista

  Hello

  I get this message "failed to Setup updates windows. returning from changes. do not turn off computer ' on my computer laptop compaq presario with windows vista.
  I have a problem it works and stop. Sometimes it is just on this slide. they gave me some recovery disks too. Help, please

  Thank you

  SK

  Hi henry ate,

  1. did you last changes made on your computer before the show?

  Follow the following troubleshooting methods:

  Method: 1

  Configure the computer to clean boot and check how it works.

  To configure the computer clean boot, follow the steps in the below link:

  How to perform a clean boot

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Method: 2

  Perform the troubleshooting steps form the following links.

  The problems with the installation of Vista updates

  You cannot install some programs or updates

  Method: 3

  Follow the form of measures, the following link to install windows updates in Windows Vista.

  Install the Windows Vista updates

• Replacing hard drive, made restoration of the factory, get the message error "installing windows could not configure windows to run on a hardware on this computer."

  OS = Windows 7

  Computer = Gateway FX6840
  Media = gateway recovery media
  Hard drive is set to AHCI in BIOS

  I started meeting with S.M.A.R.T. errors.

  I backed up my data.

  I replaced 1 TB Seagate original with a new 2 hard drive to Seagate Barracuda SATA STBD2000101. Computer is equipped also is from the factory... no additional or modified facilities.

  I tried to restore Windows 7 from the rescue of the disks created with the "Gateway Recovery Management"

  Windows copying files over, the machine restarts, it installs the devices, then it stops at the "installation program starts services" and a window opens with the message "windows Setup could not configure windows to run on a hardware on this computer.

  I can't apply the Article ID: 2466753 because the process of restoration of the plant seems not provide an option to load a driver .

  Any help would be appreciated... Gateway is only interested to collect money.  They have no interest in serving the poor suckers who buy their products (computer is 2 years old so it is out of warranty).

  Thanks for the reply.

  Fortunately, I solved the problem myself (after 19 hours of stress).
  The problem is that the recent hard disk has something different that no longer ages and makes pre-service pack 1 (SP1 solves the problem) versions of Windows 7 incompatible. My set of recovery disks have been created the day I bought the computer, which had no windows updates installed at the time.

  There is an "easy solution" on the Microsoft support site: http://support.microsoft.com/kb/2466753/en-us

  Unfortunately, their method works only if you have a Windows 7 installation disc, which does most of the people who buy computers pre-built manufacturers. Essentially, the solution is to install SP1 from a disc when don't give you the possibility to load drivers during installation, an option that the gateway recovery disks.

  So I thought that, theoretically, if I use my recovery discs to get a clean install on a hard drive that works, then use windows update to get updated (or at least to get SP1), and then make a set of NEW recovery disks (using windows backup: start > all programs > maintenance > Backup and Restore), I should be able to use these discs to install the new hard disk.

  It worked.

  So for someone else who has this same problem with new hard disks, I hope that the above is easy to understand. If not, ask someone else more savvy and show them this thread. Do not forget that at the end to create new recovery disks, it will ask you if you also want to create a 'system' repair disc. DO THIS! This is the disk that you need to start from when you are ready to install.

  Also: If your new hard drive is bigger than the one that you have created the new recovery disks, the partition on your new hard drive (once everything is installed) will be the same size as the one that you have created the records on. You will need to use a kind of editor of score for re - size. I recommend Gnome Partition Editor. http://www.gparted.org

  Burn gparted Live CD and him, resize your partition, and you're done (google for more in-depth instructions).

  Thank you, theloungelizardK, for the offer on the ISO, but I don't need. :)

  Eastan - ITF

• After that the last windows update windows is not recognizing mynorton antivirus

  I did the recent update of windows on 16/10/12 and norton antivrus also updated.  I have 205 days remaining on my norton subscription; However, when I turned on my computer today windows Action Center prompted me that my firewall is configured incorrectly and windows does not recognize a virus on my computer.  My Norton is still listed as a program on my computer and I can access them from the menu programs.  Help, please.

  Hello

  Thanks for posting the question. I will help you find a solution about the Norton as antivirus programs. Before that, please answer a few questions in order to refine the question.
   
   
   
  1. What is the exact error message?
  2 do you have any other installed third-party antivirus program program Norton?
  3. to confirm, is Norton works properly after the update?
  Method 1: Perform the steps described in the article

  Report on the health system does not detect in Windows 7 antivirus programs

  http://support.Microsoft.com/kb/2482947

   
  
  Method 2:
  
   
  If Norton works very well and you still get an error message from Windows. I suggest you to refer to this article to disable the notification. If Norton displays an error message, just reply back to us.
  Use antivirus software that Windows doesn't find
  http://Windows.Microsoft.com/en-us/Windows7/use-antivirus-software-that-Windows-doesn ' t - search
  
  Method 3:
  If you have multiple antivirus programs installed on the computer other than Norton, please uninstall and check.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
   
   
  Hope this information helps. Response with status so that we can better help you.

• Windows Update - Windows could not search for new updates 8024402F

  Hi a family member recently gave me their laptops because Windows Update has been warning that it was unable to check the updates.  It is currently running Visa Home Premium 32 bit.  After much googling and try several suggestions such as rename the file and the updated Windows Update repair tool, that I couldn't solve the problem so did a factory restore and went to reinstall the programs.  To my surprise the problem returns.  I did a restore to factory again and this time installed Vista SP2 from the file download full, installed office 2003, applied to Office 2003 SP3 and all other updates to Office 2003 I have saved and installed IE9.  Windows Update worked at this stage.  I ghost the PC, then changed Windows update of "Windows only" Windows Update "Windows and other Microsoft products" and re-run.  He looked for hours until I turned off the PC and now error code 8024402F.  My first thought is what happens when you turn on other products from microsoft for Windows Update is it downloads and installs something on the web.  Is there a problem with this module?  I have not yet installed an Antivirus so I know this isn't a factor.  Does anyone have any ideas as to what may be the problem?

  Thank you Jose,

  I think that I already tried but tried again without success.  I tried several things including Windows 7 instead of Vista, a different installation of Microsoft Office 2003 in the case where mine was corrupted etc, but still no luck.  As soon as Windows Update has been changed to include Microsoft Products he kept fails with this error.

  In the end, I tried newer versions of Office (reconstruction of the laptop each time) and with Office 2010 and Office 2013 it works fine.

  My uneducated conclusion is that there is a compatibility issue with Microsoft Update and Office 2003.

  So my solution is to upgrade to Office 2013.  Sorry, it is not a solution to the real problem, more of a work around, but hey 2003 was almost 10 :) 9 years ago

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• error when you try to update: "windows has not can find new updates, error code A 8024, 000.

  Original title : I can't update my computer... can anyone help me?

  I use Windows vista ultimate and I get the same message when trying to update-"Windows not can find new updates, error code 8024A 000 can someone help me?"

  See this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7

• Updated Windows 7 not work & Service record is missing or damaged

  Windows 7 Home Premium 64 bit - IE 11

  AV of Norton 360, v 22.7.0.76

  15 July: Windows 7 64-bit KB3161608: FAILURE

  15 July: Windows 7 64-bit KB3161608: FAILURE

  July 16: Windows 7 64-bit KB3161608: FAILURE

  16 July: MS Office 2010 32-bit KB2881030: FAILURE

  16 July: run Windows Update Troubleshooter:

  Problems encountered:

  Registration for the service is missing or damaged: DO NOT FIXED

  Windows update error 0 x 8007005(2016-07-16-T-11_22_48A): DO NOT FIXED

  Problems installing the recent updates: FIXED

  Problems installing the recent updates: FIXED

  Problems installing the recent updates: FIXED

  Especially do not show in history as installed.

  Several updates installed successfully on 18 June.  "Since running convenience store States ' control last updated: never" and updates have been installed: never.

  However, the history of the update is still present.  (From memory I think the last control was July 12.

  I think that there is a "silverlight" update which probably do not instal.

  Of Norton report that shows ' 14 July installed Adobe Flash Player 22 Active load 32-bit X' - do not appear in the history of the update?

  'Services' - status shows several 'start' but nothing running at all.

  Not sure what is relevant.  I am a silver surfer & sadly not computer illiterate.  A "RESTORE POINT" to June 18 would have a good effect?

  Thanks for any help

  I suspect that Norton might be part of the question, and if you were to perform an Internet search on something like:

  the failure of the Norton windows update

  You will see more than a million results with these words:

  

  Granted there are problems with Windows Update, because for several months but if your updates are downloading and just do not install I would suspect Norton - because in their community of support online, there are so many reports of problems and many, many debates and ideas for things to try that can work sometimes maybe (sometimes they work) , adjustments for Norton, the reinstall from scratch... it is very messy.

  In their community, they discuss especially Norton vs. Windows updates and you tell your update Adobe and Trusteer OK but those who use a different method to update that updates Windows, the problem could be JUST with Windows updates.

  Unless you are forced to use Norton for a reason, you should consider at least temporarily uninstall, then reboot your system without it and see what things look like.  You can always install it again later, no?

  You must be sure to use their custom tool to be sure that the uninstall is clean:

  https://support.Norton.com/SP/en/us/home/current/solutions/v60392881_EndUserProfile_en_us

  Some people dislike not so much of Norton (and the problems that come with it) they believe Norton its own type of computer infection and malware.  I would never recommend or install it, but your mileage may vary.

  Remember to replace Norton with something like Microsoft Security Essentials, which has a much smaller footprint, and you can download the low low price of free:

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Your system will give you better performance.

  As mentioned hit Windows Update for a long time too, but you can probably fix that part.