Updated Datasocket VIs?

Similar Questions

• After a recently added update Firefox ' VISIT: url' / ' search: text "as the first result... can remove you that?

  Its quite annoying. It will simply display the URL for previously visited sites... but if I wanted to look for something... I would simply enter the text in the address bar now she suggested this little annoying thing that says to go directly to the URL.

  I have not controlled search suggestions and he always does.

  See the solution chosen to
  https://support.Mozilla.org/en-us/questions/1099785

• Update firmware 7.7.7 7.6.7

  My airport express and extreme are updated to firmware again offers:

  7.7.7 and 7.6.7 for adults.

  It is not announced and what's inside

  7.7.7: Airport Station of Base of the Firmware Update 7.7.7 Information

  On the Firmware Update 7.7.7 Base Station Airport

  Update firmware 7.7.7 is recommended for base stations all AirPort Extreme and Time Capsule to airport with ac 802.11. This update improves the stability and performance of your base station.

  This update:

  • Resolves an issue that may prevent communication between clients on the same network
  • Improves performance with an extensive network of comments
  • Resolves conflicts of potential names with Hello sleep Proxy

  For more information on updates firmware of base station at the airport, including instructions how to install the update, please visit: http://support.apple.com/kb/HT1218

  7.6.7: Airport Station of Base of the Firmware Update 7.6.7 Information

  On the Firmware Update 7.6.7 Base Station Airport

  Update firmware 7.6.7 is recommended for all Apple 802.11n Wi - Fi base stations including AirPort Express, AirPort Extreme, and Time Capsule from the airport. This update improves the stability and performance of your base station.

  This update:

  • Resolves an issue that may prevent communication between clients on the same network
  • Improves performance with an extensive network of comments
  • Resolves conflicts of potential names with Hello sleep Proxy

  For more information on updates firmware of base station at the airport, including instructions how to install the update, please visit: http://support.apple.com/kb/HT1218

  For more information on the use of products from the airport, go to the Support Page at: http://www.apple.com/support/airport

  Kind regards

  Shawn

• get the name of resource VISA

  I connect serial port COM3 to a digital multimeter, I can sure that COM3 is displayed in Device Manager. but I don't know if COM3 is in the name of resource VISA list. If COM3 is not in the list, I want to update resource VISA name.

  So my question is how to program can get the entire list of the name of resource VISA, so that the program can compare resource VISA with COM3 automatically name? How the program can update the name of resource VISA, if COM3 is not in the list?

  LabVIEW 2011 windows 7

  Thank you

  Control of resources VISA automatically displays the available visa resources. If it isn't then looks like there was an error in the installation of NI-VISA.

  An alternative is to use your own control, as suggested here: http://forums.ni.com/t5/LabVIEW/VISA-resource-name-control-want-to-refresh-list-of-COM-ports/td-p/13...

• LabVIEW 2009 linux crashes when editing a control, or a constant of resources VISA

  Linux crashes when I click on a constant resources VISA (block diagram) or control (front).  This happens on LabVIEW 2009 SP1 32-bit for Linux on CentOS (similar to RedHat 6.3) 6.3.  I have updated drivers VISA 5.1.2 and that did not help.  Thanks in advance for any ideas of five Linux guys out there.

  Hello Jason,

  My problem has been resolved with LabVIEW 2012.  To answer your question, LabVIEW would crash only trying to select another device in the list.  Thanks for your help.

  Kind regards

  Marvin

• nimxs.exe automatically processes the call VISA::viFindRsrc.

  The process nimxs.exe running in the background automatically call VISA::viFindRsrc whenever the device I tested is connected to my computer. The device is connected as a network card. This process is finding various devices on the network and with up to 15 seconds to complete each time. Meanwhile, it tends to lock the resource, I'm trying to send commands to with Labview and causes the following error.

  VISA: (HEX 0xBFFF000F) specified type of lock cannot be obtained, or specified operation cannot be performed because the resource is already locked.

  This problem started when I updated NI-VISA of 4.1 to 5.1.1. Is there a way to disable this automatic search for network equipment? The only time I want to pick up equipment is when I opened NOR-MAX.

  Hey Ryan,

  Is this a problem for you to have the service disabled? You should not need unless you want to be able to automatically detect the LXI network devices.

  We will continue to investigate the issue and rated fixes for future versions.

• Windows Update does not update information

  I put a screenshot of what happens here:

  http://img94.imageshack.us/img94/3190/winupdate.jpg

  She's never going to tell me the name of the update or what it is. This has happened with every update of the last two weeks. Today, he tells me I have 3 updates closer, but he is unable to find any info on this subject.

  Hi zzztag,

  Welcome to the Microsoft Answers community.

  Try the methods below and let me know if this helped.

  Method 1:

  Remove temporary files (the browser history and cookies).

  For internet explorer 7:

  1. open Internet Explorer, click on tools and select Internet options.

  2 click the general tab and then click on delete browsing history.

  3. to remove the historical area of navigation, click on delete.

  4. now click on the following buttons: delete files, delete Cookies, delete history.

  5. now, click the close button.

  6. now click on the OK button of the window internet options.

  For internet explorer 8:

  1. open Internet Explorer, click on tools and select Internet options.

  2 click the general tab and then click on delete browsing history.

  3. to remove the historical area of navigation, click on delete.

  4 place the check of the following: temporary internet files, Cookies, history (delete the box for others). Now, click on the button Delete.

  5. now, click the close button.

  6. now click on the OK button of the window internet options.

  
  Method 2:

  1. click on the Start button.

  2 type the following commands (one command at a time) in the search box and press ENTER.

  regsvr32 jscript

  regsvr32 vbscript

  regsvr32 /i mshtml

  Method 3:

  Reset the Windows Update components.

  To reset the Windows Update components visit the link below and click on solve this button / follow the given steps to repair it yourself.

  http://support.Microsoft.com/kb/971058

  Hope this information is useful.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Updates to Windows Firefox blocking systems to blue screen since 09/02/10

  Since Windows 7 updates tonight (09/02/10) I have blue screen crashes when you run the Mozilla Firefox browser. It started just this evening with the latest Windows updates. I have reported this here and on Mozilla and hope that someone set quickly. If this isn't the case, I'll have to restore both of my laptops to the restore point before applying updates. We running Windows Home Premium 32 bit, and the other is WHP 64-bit, so I know the issue is not limited to one specific machine.

  Firefox bug Forum sent me this reply. Not specific to Win7, but leads me to think it may be something similar...

  This has nothing to do with your problem if you can start your computer Win7 (not Firefox) without getting a BSOD.

  CF. http://blogs.technet.com/msrc/archive/2010/02/11/restart-issues-after-installing-ms10-015.aspx

  Meanings not necessarily bear, if you experience one or more of the updates that you have installed on or after that 09 Feb-10 is at the origin of behavior...

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Home page of Security Support consumer & Microsoft Update Solution Center also offer support options
  https://consumersecuritysupport.Microsoft.com/
  http://support.Microsoft.com/ph/6527#tab3

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

• Error Code 800706BE and the 800706BE error Code could not update windows. CSP as also stopped working.

  I can't update windows. I get to 800706BA and error Code 800706BE codes. I also get frequent error messages that Cryptographic Services like stopped working. I would really like to fix this way! Thank you.

  OPTION A:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  OPTION B:

  You see the effects of a hijackware infection!

  NB: If you had no installed anti-virus application or subscription has expired at thetime the first machine was infected and/or your subscription has expired since or the machine is not been kept fully patched in Windows Update constantly, don't waste your time with any of the following: Format & reinstall Windows.  A repair install won't help!

  Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

  Otherwise...

  1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

  NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

  2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

  2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

  3. now run a thorough check for hijackware, including registration required before a proper Court, logs don't here. DON'T SKIP THIS STEP!

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Insert the CD-ROM for Microsoft Works 9.0 for critical updates

  How to change when I am asked to insert the CD-ROM for Microsoft Works 9.0 for the updates to take place? Given the computer came with all the software already installed and there is no disk provided. I can guarantee for hardward problems no software issues. Really need help on this one to prevent threats to the computer.

  Hi Cj_jez,

  1 is Microsoft Works and you will prompt to install the update or you are trying to install it via Windows updates?

  As the message is asking you to insert the CD of Microsoft Works 9.0, you will need to insert the right disk to install the update. As the computer came with all already installed software, the best option would be to contact the manufacturer of the system that has installed all the software on the computer.

  In the meantime, try the following steps and check the result.
  Step 1: Manually install the update
  a. visit the link and look for update for Microsoft Works 9
  http://www.Microsoft.com/products/works/downloads.mspx
  b. open the downloaded file and install it.
  c. once the update is installed, restart the computer and check the result.

  You can also get in touch with the support of Microsoft Works team to see if there are other options to install the update without using the disc:http://www.microsoft.com/products/works/support.mspx

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I just installed windows automatic updates and I lost all my documents and leaves calculation I want it will cost me thousands of pounds, if I lose this information

  I had all my private information and business erased from my computer, worksheets and medical information very importand.

  Never allows automatic updates.
  Microsoft, which think they are wiping files and worksheets that I will wait only by restoring the yesterday I'll get them back if not,.
  so I think that there is a lawsuit against Microsoft.  Critical updates for windows have been installed and my own documents and files have been moved to wipe.
  I don't have any document that I don't have excel workbooks where they are all gone?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying experience issues installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  ========================================
  Warning: MS MVPS represent or work for Microsoft

• Update KB971644 fails repeatedly to install on Vista 32 bit system

  Every day, I notified of an update recommended to my system, (update KB971644 in particular) and every day it fails to install. Sometimes I get an error message which is recommended to visit the homepage of Install Shield, but I get no response here. (the error code is no.-3). The update is only about 6 MB, and I know I have enough hard drive space. I tried to clear my cache, cutting off the firewall and even leave the virus protection software. Don't know what else to try to install this update! All other updates installed, and I have all the Vista service packs installed and running courses. Thank you.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You receive an error message when you install the update?

  Try to disable all non-Microsoft programs and try to install the update.

  Update KB971644 is the platform update for Windows Vista, it contains the following updated technologies:

  Windows Graphics, Imaging, and XPS library
  Windows Automation API
  Windows portable devices platform
  Ribbon Windows and Animation Manager library

  Updated Windows program malfunctions if none of the non-Microsoft programs interrupts the installation updates.

  If you want to install this update and then, try the steps below.

  Reset windows update components.

  To reset the windows update components visit the below link and click repair button / follow the steps to fix it yourself.

  http://support.Microsoft.com/kb/971058

  Now try to install KB971644 update from windows update.

  For more information visit http://support.microsoft.com/kb/971644

  You can check the link below.

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• error code 0 x 645 net Framework 3.5 service pack 1 family 2.0 through 3.5 update has not been installed in the tested 20 times updates

  also frame work service net pack 2 update of security for windows 200 windows xp (kb74417) helps

  See the section "How to get help" of http://support.microsoft.com/kb/974417

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Home Security page customer & Microsoft Update Solution Center also offer support options
  https://consumersecuritysupport.Microsoft.com/
  http://support.Microsoft.com/ph/6527#tab3

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install the update KB2416447 - Visualstudio7x80update

  For automatic installation, event log shows: could not find the description of event ID 5000 in the Source (NativeWrapper)...

  For manual download and install, the pop-up window:

  Windows Installer - this package could not be opened. Verify that the patch package exists...

  Download: Version NDP1.1sp1 - KB2416447 - x 86 .exe 1.0.1686.5002 size: 14,219,200 bytes

  Thanks for any help,

  Ron

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Automatic update does not install the update of security for Windows XP (KB2419632)

  KB2419632 will not install on my computer.  I tried to install it several times without success.  I get a 'General failure to install' error without characteristics.

  I downloaded the update (WindowsXP-KB2419632 - x 86 - ENU.exe) and tried to install it manually, but it fails when he tries to save the file "" MSADO15. "." DLL"in the folder"C:\Program Files\Common Files\System\ADO".

  The dialog box that opens is "Copy error" and said "Setup cannot copy the file msado15.dll.  Ensure that the location specified below is correct, or change it and insert 'Windows XP Sytem Files' in the drive you specify. »

  The file MSADO15. DLL exists in the directory above.

  In reviewing other positions, he requested information on the following security software:
  1 security Suite: McAfee Total Protection 2010 (current subscription)
  2. what McAfee, Norton never
  3. preliminary: do not remember, have always used McAfee.

  NOTE: I've never had a problem with an update of Windows until one.

  How should I proceed?

  See the section "How to get help" of http://support.microsoft.com/kb/2419632

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.