Updates to Windows Firefox blocking systems to blue screen since 09/02/10

Similar Questions

• Update Windows xp caused my computer blue screen and now will not start.

  Update Windows xp caused my computer blue screen and now will not start.  There has been no change to my system hardware or software otherwise.  After that windows update Setup, he asked to restart the computer.  When restarted, the computer screens and past blue to the quick menu for safe mode and last known configuration to work.  None of these mode of work, not to shelter or otherwise.  The only thing that he will now implementing market is quickly flashing the blue screen and restart once again to this quick menu.

  It's really annoying because I have important files on this computer work and can't afford to get in shape!   I put my confidence in using windows and keep it updated.   During the installation of your updates, it made my system fails and does not restart.   I'll be very upset if this update of windows xp causes me to have to reformat and lose important files!

  Any advice on a solution?   I need to get this computer work as soon as POSSIBLE.

  Ben River

  I ordered the Dell XP disc and did the re-install. It works fine now. The Dell technical support had me do some updates on the web as well. I have not had problems since. What happened with the automatic updates completely wiped out my operating system. At least I don't have to buy a new computer.

  If nothing else works, try reinstalling your operating system. It worked for me.

• I don't like to upgrade Windows XP to Windows 7, because I'm blue screen/crash during the upgrade but the upgrade Windows XP to Windows Vista does not crash during the upgrade!

  I have my computer to another, here my specs:

  Intel Core 2 Duo
  Hard drive 500 GB
  2 GB OF RAM
  DVD player
  Floppy Disk
  The operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.
  Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?

  Hello

  1 did you change on your computer before this problem?

  2. What is the blue stop screen error message?

  3. When you receive a blue screen during the upgrade?

  You can follow the suggestions and then check.

  Method 1

  Disconnect external devices connected to the computer?

  Method 2

  You can read the article and then check.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  See also:

  Windows 7 Upgrade and Migration Guide

  http://TechNet.Microsoft.com/en-us/library/dd446674 (v = ws.10) .aspx

• Windows 7 starts with a black screen (since the last update), if I go to the Task Manager.

  * Original title: startup error

  Windows 7 starts with a black screen (since the last update), if I go to the Task Manager and processes there are 2 sessions of "run once container" if I stop or another (they are two different size) windows lights up normally.

  Can someone help me please?

  Hello

  Thank you for the information.

  System Restore helped to heal the cause (last option of course)

  not sure about the Windows update that seemed to start the problem, but it is 2 instances of run once Wrapper were running.   I have found that if black screen you started the Task Manager, then selected and close it, either run it once windows Wrappers would begin.

  Anyway thanks for your help, we are now healed.

• On firefox memory leaks cause blue screens?

  On firefox memory leaks cause blue screens?

  If you encounter blue screen crashes, this majority refers often to an incompatibility with a device driver, especially the graphics drivers. Go to Firefox Safe Mode and disable the use of Firefox hardware acceleration of graphics.

  Assuming that Firefox is closed:

  Hold down the SHIFT key when you start Firefox. You should get a small dialog box. Click on 'Start mode safe' (not reset).

  (If Firefox is running, use Help > restart with disabled modules to call the dialog box.)

  In Firefox, open the Options of the Advanced tab dialog box:

  the button Firefox orange (or the Tools menu) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  This will take effect after you exit Firefox and start it up again (in normal mode).

• Had to reformat my hard drive, now when I try to reinstall Windows XP I get a blue screen with this code at the end 0x0000007b.

  has had to reformat my hard drive now when he star0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000)

  has had to reformat my hard drive, now when I try to reinstall windows xp, I get a blue screen with this code at the end 0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000) how to solve this problem

  Hello

  I saw the 0x0000007B BSOD caused by trying to install XP on a disk hard while the BIOS is designating the reader as AHCI instead of IDE. XP has no native AHCI drivers, resulting in a stop 7B. Unless the PC had originally Vista or Win 7, but it might be useful to check that it is not likely.

  If the BIOS is set to AHCI, you could do one of three things (depending on whether your PC has a floppy drive)...

  1 find the Setup F6 disk on AHCI support at installation time (start with the manufacturer's website if you do not already have such a thing). Watch the very hit F6 prompt early in the installation process.

  2. change the setting in BIOS on IDE / ATA

  3. create a new "slipstreaming" installation disc drivers AHCI in the existing installation disc, see http://www.nliteos.com/index.html

  After the back if your BIOS is IDE / ATA

  Tricky

• Windows continues to if crush/blue screen mentions stdriver32.sys and bios updates

  My computer crashes, a blue screen with lots of text flashes up briefly before the restart of the it, I took a photo of the last time so I could read: says:

  "A problem has been detected and windows has shut down to prevent damage to your computer.

  It gives then a few steps to follow if the problem happens again, but I do not understand what I have to do. The first is to check that I have enough disk space (pretty sure I do, there are 60 GB free on the hard drive). Then he said: If a driver is identified in the error message turn it off / update. He suggested then update BIOS/disable cache/occultation layout.

  I'm not sure if it's just a standard error message?

  Technical information:

  STOP: 0 X£ 0000008 (0XC0000005, 0X91838C21, 0XA9880878, 0X00000000)

  stdriver32.sys - address 01838c 21 base at 91834000, DateStamp 059370 4 d

  This happened about 15 times now, usually I have Firefox running on time, possibly Skype or msn also - don't know if this is relevant.

  After the crash, the computer reboots normally, so far. I reallly appreciate any help or advice.

  Thank you. Paul

  It seems that this is caused by SoundTap, recorder of audio.

  You can uninstall it if you need, or if you use it, reinstall it to ensure that get you the most up-to-date for your operating system version.

  If you still get the BSOD, you can post your DMP files so that we can check out them?

  You can zip the MiniDump files in the C:\Windows\Minidump folder and make it available via Windows Live SkyDrive. You can then provide the link to that on this forum.

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• Windows 7 x 64 Pro blue screen intermittently on the new system

  I recently created a workstation and noticed that, sometimes, we get a blue screen.  Error message:

  Windows has recovered from an unexpected shutdown
  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033
  More information about the problem:
  BCCode: 50
  BCP1: FFFFF940C27298A0
  BCP2: 0000000000000000
  BCP3: FFFFF9600007263C
  BCP4: 0000000000000005
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1
  Files helping to describe the problem:
  C:\Windows\Minidump\052214-12136-01.dmp
  C:\Users\Samuel\AppData\Local\Temp\WER-18018-0.SysData.XML

  Details of the system:

  Windows 7 Professional SP1
  Processor: Intel Core i5-4570 CPU @ 3.20 GHz
  RAM installed: 8.00 GB
  System type: 64-bit Operating System
  Main logic board: ASUS B85M-E/CSM
  DIMM: Patriot Viper DDR3 PC3-12800 16 MHz 8 GB
  Storage: SSD Samsung 120GB SATA 840EVO
  Storage controller: Intel 8 series/C220 SATA AHCI Driver 12.0.0.1082
  Monitors: 3 x LG 27EA33V-B
  Embedded video: Intel HD Graphics 4600, pilot 9.18.10.3186
  Network: 1GbE Realtek, pilot 7.67.1226.2012

  There IE 11.0.9600.17107, but I do not normally use, I use rather Firefox 29.0.1, but only for e-mail and 4 websites; I don't do any surfing.

  I have installed MS Security Essentials and set automatic updates.  IE has old what only once, with 11.0.8 update.  Windows has already updated several times.

  I hope I can join the 2 files related error referred to in the above message.  I put this in the performance and Maintenance category as that seemed the closest to this question.  Can someone please help me to get because of the deep on this problem?

  Thank you

  TD

  P.S. I don't seen any possibility to attach files, it might go to the private message.

  Yes, thank you!

  The attached file of the DMP is the verification of bug PAGE_FAULT_IN_NONPAGED_AREA (50) .

  This indicates that invalid system memory was referenced.

  Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  ------------------------

  1. uninstall Asus PC Probe as well as any other Asus bloatware as soon as POSSIBLE.

  2 run Memtest for NOT LESS than 8 ~ (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  Note that some older generation motherboards do not support USB boot, your only option is CD (or floppy if you really wanted to).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  Kind regards

  Patrick

• Windows 7 stuck on the blue screen when I try to update of Skype.

  I have the HP - Pavilion g7 Notebook and have not had any problems until I was getting a blue screen of death after that update of Skype, but I have on my computer. I had to do a system recovery several times until I discovered that it's a problem apparently caused by Skype, now Skype wants to update again and windows7 doesn't like it at all, the machine crashes again. Last resort, I downloaded an old verson of Skype that works very well, but long term does not solve the problem.  If there is a fix what's not got any suggestions for Skype, for that to be resolved. The only thing I hear it might be related to a driver that has not been updated.  What can I do?

  Thanks in advance

  Countryfairy

  Hi again. I finally found this solution only took me 3 days. All because the left hand is not the right hand. You must ensure that you have install the driver of camera from microsoft: 6.1.7601.18208

  I found this by installing a driver from windows update when you access the properties of the camera. Hope this helps everyone. So far, I've found many users with the same problem, but do not see a single post with a solution that works. Good luck to all.

• Windows 8 HP laptop blocked on clear blue screen after auto repair.

  My younger brother, who has a laptop HP in Windows 8, told me recently that her computer was broken. I turned it on and it works normally with loading points and logo of HP that move in a circle. Then after a few minutes, a brief blue screen appears with a frowny face and a message that says: "your PC has encountered a problem and needs to restart." We are only collecting the error information, and then we'll restart for you. "After that it shows that for about two seconds it goes back to the HP screen where it says now auto repair. Then it goes to a black screen blank, followed by a white light blue screen with which I can see get around and see the mouse. I tried pressing all the buttons I could think of, all the 'F', control + alt + delete, etc, but I can't really start up where it can connect. Any help would be appreciated, thanks in advance.

  Hello

  Check with HP support or a real computer store (that makes its own service in the workshop).

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ====================================================

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  You can start safe mode?

  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  Error: Windows could not start. A recent hardware or software change might have
  problem after installing Windows updates
  https://support.Microsoft.com/kb/2674065

  Try to run the auto repair: (can be run from a Windows disk if necessary)

  How to run a repair 'automatic' to solve the problems of Windows 8 start
  http://www.eightforums.com/tutorials/2843-automatic-repair-run-Windows-8-a.html

  ======================================================

  If necessary:

  How to start on the "System Recovery Options" in Windows 8
  http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Update for Windows Vista for systems x 64 (KB970430) maintains a failure. Error 800b0100 code.

  He tried to install since 10 December and fails every time with this error.

  someone at - it suggestions?

  Hello

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• After restoring factory and updates for Windows 7, the system now asks passwords

  Recently had to do a factory restore on a toshiba laptop with windows 7 preinstalled top. has restarted the machine once he had comepleted and now it says Admin profile is locked and my username and password do not work

  
  

  1 - password was never set on the user profile. (Yes it may have been stupid not to do that for security, but that a person uses the laptop)

  2nd why admin profile has been locked?

  3rd - without having a password to disk or save it on a USB key, how can I get around this?

  4th - also why Microsoft charges to ask questions and get support on their own products?

  * original title - Windows 7 - had to factory restore after updating to windows 7. now, cannot connect to admin or normal user logon. said needs password. PASSWORDS were never defined for this? Please advise *.

  no disc to try this.

  Ive managed to get it to load the office by changing the settings via safe mode, but with a full restore (some missing drivers, IE the sound card), it always seems to be filled with questions. It runs terribly slow now and still doesn't let me do half of what I need to do to restore its former glory.

  at the present time, this will make a nice door stop or decoration of the table such that it cannot serve to something else other than to gather dust.

  does anyone have a suggestion on how to fix this problem that began after I installed the latest update of windows 7, 2 days ago.

  Try this:

  To access the system recovery environment in Windows 7, simply start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. You will see a new option "Repair your computer", select this option and press 'Enter' on your keyboard.

  This will allow you to start system recovery environment and access to the same tools.

  Mobile: http://www.notebooks.com/2009/10/20/improved-recovery-options-in-windows-7/

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Windows 7 so that watching an internet blocks on a blue screen and runs or done a thing of memory then try to reboot from the black screen BACK.

  Windows 7 then look at an internet (with explorer) hangs on a blue screen and runs or exports a thing of memory then try to reboot from the black screen BACK. Once it blocks he continues to do it regularly. I rebooted then F8 and run the memory verification, and it seems to work for awhile and I have extended the temporary internet memory to 1000 k.  Can before if necessary mini discharge can not see myself. Any help would be great.

  Hi Rudi,.

  you get this crash:

  Bug Check 0x1E: KMODE_EXCEPTION_NOT_HANDLED - This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  Arguments:
  Arg1: ffffffffc0000005, unhandled exception code

  ExceptionCode: c0000005 Access violation =

  the driver, resulting from this is the driver of Norton/Symantec SYMTDI. SYS.

  Image path: \SystemRoot\System32\Drivers\N360x64\0308000.029\SYMTDI. SYS
  Image name: SYMTDI. SYS
  Timestamp: Thu Jul 07 02:28:48 2009

  So put day/remove Norton/Symantec to fix.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Why I repeatedly get a security update for Windows Vista for systems (KB2676562) and update for Windows Vista (KB2679255) focused on the x 64 even after that both have been installed successfully?

  update of security (KB2676562) has already been correctly installed 21 times, began towards the end of May.  Update for Windows Vista (KB2679255) was successfully installed 35 times, he began in mid-April.  These two continue to update themselves every day and do it at least twice a day, back to back.  It is very frustrating to have to deal with that and makes me think that something may be a problem with my computer.  I had heard of registry cleaners is not not a good thing to use, if recently I not unhooked my registry free cleaner.  I hope that it has not caused my computer to lose any registry key values.  Does anyone know a possible solution or what I need to do? I thank everybody help, please!

  Hollow salvation of the farm,

  Try these steps

  Method 4: Reset the contents of the Catroot2 folder

  go to start > all programs > Accessories > right click on command prompt > run as administrator

  Reset the contents of the Catroot2 folder. To do this, follow these steps:

  Type the following commands and press ENTER after each command:

  net stop cryptsvc

  MD %systemroot%\system32\catroot2.old

  xcopy %systemroot%\system32\catroot2.old /s %systemroot%\system32\catroot2

  output

  Restart the PC and then

  Method 8: Rename the folder C:\Windows\SoftwareDistribution

  Rename the Windows Update temporary C:\Windows\SoftwareDistribution folder. To do this, follow these steps:

  Open an administrative command prompt window.

  Run the following commands and press ENTER after each command:

  Net stop wuauserv

  CD %SystemRoot%\System32

  Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

  Net start wuauserv

  Try to install updates again.

  also try to scan your computer

  Method 1: Use the Microsoft Safety Scanner to scan your computer for viruses and malware

  
  To analyze your computer by using the Microsoft Safety Scanner, click on the following link:

  http://www.Microsoft.com/security/scanner/ use the software to combat spyware and antivirus software to scan the computer.

  To see a list of third-party anti-virus software vendors, visit vhttp://www.microsoft.com/windows/antivirus-partners/windows-7.aspx.

  To download and install Microsoft Security Essentials antivirus software, visit http://www.microsoft.com/en-us/security_essentials/default.aspxc.

  Please come back if you need assistance

  Thank you

  Makoi

• Windows 'System performance' BLUE SCREEN

  JEG far gentagne Ganga nedbrud af pc pga. BLUE SCREEN. Hvad kan/skal jeg gore for at blive debt problem kvit?

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

  Vaelg said sprog fra drop-down look nederst pa siden said sende sporgsmal pa det sprog, the want to. Det forum of the udstationeret I er for kun fransk pa. If the ikke kan finde det onskede sprog stotter possibilities for verder ovennaevnte international steder ved at folge linket out end of kan:

  http://support.Microsoft.com/common/international.aspx