Updated HP Envy M6-1302sa memory

Similar Questions

• HP ENVY 13-d021nd: updated HP ENVY 13-d021nd memory

  Hello

  Perhaps, I would buy HP ENVY 13-d021nd with 4 GB memory. Is it possible to upgrade to 8 GB of memory? It's the last model released in 2015! I found the specs to a PDF from 2009, but I can't find one in 2015? Some critics say that it is possible to replace/upgrade. Some say that 4 GB is the maximum...

  Of course, I can find a 4 GB of SDRAM DDR3L, but not if it is possible to upgrade to 8 GB.

  Thanks in advance.

  Greetings,

  Arjan

  Here is the Service Manual:

  Manual

  Support for LPDDR3-1600 dual channel memory, amount of memory on-board

  Support for system maximum of 8192 MB RAM in the following configurations: ● 8192 MB (16 GB, 256 MB × 16 × 4 × 4 parts) ● 4096 MB (8 GB, 128 MB × 32 × 2 × 4 pieces)

  The laptop comes in a concert 4 and 8 GB version and memory is "onboard" meaning it is welded directly on the motherboard so no upgrade is possible.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Envy 850-065SE: memory upgrade problem

  HP computer: Envy 850-065SE (memory 4 locations)

  Memory: G.SKILL RIPJAWS V F4-2133C15D-32GVR DDR4-2133 CL 15-15-15-36 v 1.2 2 * 16GB

  I just bought 32 GB (2 * 16) G.SKILL RIPJAWS V F4-2133C15D-32GVR DDR4-2133 CL 15-15-15-36 v 1.2 memory to upgrade my HP desktop computer (model 850-065SE of envy). My office has a HP mother 2B3A and i7 - 5820 k and HaswellE chipset. The memory of the plant is of Samsung brand with configuration DDR4-2133.

  When I replaced the memory of samsung (trademark) with G.SKILL ones, the computer cannot start with black screen. When I've switched back to factory memory, the computer is back to normal.

  That means G.SKILL RIPJAWS V 16 GB memoryis is not compatible with this HP computer motherboard? or upgrade the BIOS can solve this problem? or do I return these memory and get 8 GB * 2 instead? Your comments are much appreciated.

  This model is limited to only 4 GB and 8 GB modules in the slot.

  B21 HP

  CL15 - DIMMs, 4 GB, PC4-17000, 798033-001, DDR4 COMPLY_2.07

  CL15 memory - DIMM, 8 GB, PC4-17000, 798034-001, DDR4 COMPLY_2.07

  You can buy online modules of 8GB.  Look at the technical on this point.

  https://www.CDW.com/shop/products/Kingston-DDR4-8-GB-DIMM-288-pin/3912220.aspx#Po

• on iPad Mini iOS 9.2.1 update fails due to low memory, even though 57 GB are available

  iOS 9.2.1 update failed due to low memory, although 57 GB was available.

  What is the cause and the fix?

  EN 57 is the size of your storage. There is no iPad with 57 GB of memory (live RAM). Have you tried to hold the home and power buttons until the iPad reboots? Also try double clicking the home button and close any open applications.

• ENVY m6-1302sa: HP ENVY m6-1302sa ACPI\HPQ0004\3 & 2411E6FE & 0 Driver 8.1 Windows x 64

  Hello

  I recently reinstalled windows 8.1 Pro x 64 and reinstalled all the drivers for the HP ENVY m6-1302sa HP Web page but I'm having trouble installing the latest driver that is listed as an unknown device in Device Manager:

  ACPI\HPQ0004\3 & 2411E6FE & 0

  Which I believe is the Software of HP 3D DriveGuard. The problem I have is that whenever I try to install sp63786.exe , as had been suggested to install by google, I get the following error:

  Unable to install the driver of HP 3D DriveGuard, the material of the accelerometer is not present or taken in charge on this unit.

  This last problem related to the driver any help would be greatly appreciated

  Kind regards

  m666111

  Hello:

  You do not have the driver for 3D driveguard.

  See if it works and install it manually if automatic installation method does not work...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_125640_1

• HP Envy 13: update for HP Envy 13 laptop memory

  Hello, everyone

  I'm looking in the posibility of an update memory HP Envy 13 , d100nn and d101nn.

  How many slots DIMM is there and what is the maximum size of DIMM per slot?

  Could not find anything in the public Internet space.

  Thank you in advance!

  Hello

  Looks like you can not because RAM is average of Tournay on board it is soldered to the motherboard:

  http://support.HP.com/au-en/document/c05201115

  http://support.HP.com/EE-en/document/c05201113

  Kind regards.

• HP ENVY 17-n046nd: update of HP ENVY 17-n046nd memory

  Hello

  Can upgrade you the memory of 8 GB to 16 GB? If so, how many slots memory this laptop there?

  Best regards

  Nick

  Nick.

  Housing of memory not accessible/upgradable memory two

  Supported dual channel DDR3L-1600

  Support 16 GB of RAM in the following configurations:

  ● 16384 MB total system memory (8192 × 2)

  ● total system 12288 MB memory (8192 × 1) + (4096 × 1)

  ● System total of 8192 MB memory (8192 × 1.) or (4096 x 2)

  ● total 4096 MB system memory (4096 × 1).

  Warning: Upgrade the computer to the latest BIOS before installing new memory can lead

  in the different problems in the system.

  Your manual here.

  http://support.HP.com/us-en/product/HP-envy-17-notebook-PC-series/7771351/model/8637012/manuals/

  Start on page 40.

  REO

• HP Envy 14 1085eo memory update

  Hello

  I wonder what kind of memory I can put in my envy 14 "1085eo.

  Is - this 204pin sodimm PC3-10600? like this: http://www.komplett.no/k/ki.aspx?sku=574057

  I asked as everywhere and I can not get a response. not even hp support phone could help me. and I think it is a bit poor, not to know their own products.

  Hello:

  Here are the specifications of your laptop:

  http://support.HP.com/US-en/document/c02452446=

  You can install PC3-10600 2 x 4 GB (8 GB total). Don't do that if you are running an operating system 64-bit or 4 GB will not be seen by Windows.

  The memory you listed should work. I do not understand Norwegian, but I don't suppose that means Ikke? As in the non - ECC?

  The memory of that your laptop uses is no ecc and not stamped.

  Paul

• TouchSmart HP Envy 15-J104sa memory card reader does not

  I took delivery of a HP Touchsmart from Envy 15 - J104sa, running Windows 8.1 this week and the internal memory card reader does not work. It does not recognize SD cards (I tried more than one) and continues as if nothing has been inserted; Don't display an error message. The cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver software update (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) whenever an SD card is inserted; This must be done with the card in the reader. If the software is running and then the card nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it is not recognized and the process must be restarted and the driver reinstalled even though nothing has changed.

  Can someone please help me with this question or I'll have to go back to the HP laptop. I do a lot of photography so being able to read fast and reliable SD card is extremely important for me; It is not a problem, I was expecting a new laptop all right out of the box.

  Thanks to you all.

  Unfortunately not, updates of driver solves the problem, but an update of the BIOS through the HP helper application seems to have resolved the issue. While I appreciate there were not specific drivers available in my opinion, it is difficult to accept that HP should be able to release a model where they know the equipment are not fully supported by the operating system and in this case does not work.

• Last update causing error in system memory

  I just ran the update on my iMac and have the death rotation color wheel!  The system is out of memory the application twice!

  I have an iMac 27 inch late 2009

  I can't get anything to work, and the system has installed 16 GB.  I had a similar problem with Mail eat all the memory the application when I did an update in December and now it's happening again.

  Help, please!

  Dead in the water.

  Try restarting your Mac in safe mode:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• HP envy 20: someone had problems updating their envy of hp with Windows Windows 8 to 10?

  Someone had hurt update to Windows 10 of Windows 8? I bought my hp envy 20 while pc ome in 2013 and hp said that it is fairly new to encourage the transition I've heard that some of the older ones are not. But I keep if with errors when my computor wants to make updates and he finally gave me the unfortunate blue screen, then finally black screen and would not start. I'm trying to understand why he did it so that I can avoid or help the situation, I am the future when I get it back of fixed neimg. Any thoughts??

  Greetings,

  Someone is probably going to stomp on my answer.

  Stick with the HP operating system factory if you can deal with that.

  HP Envy 20 is not good product number. So I can't review the instructions of your PC.

  I'm guessing that HP does not Win 10 driver support.

  Microsoft is, of course, drop the ball on the provision of the correct drivers for your PC.

  So spend you to Win 10 successfully but a lousy update your PC?

  It might be a bad driver update or a cumulative update.

  You can stop to win 10of the driver updates, but you cannot stop the other updates.

  The grass is not always greener on the other side.

  See you soon!

• HP Envy 15-as027cl things: HP Envy 15-as027cl memory upgrade things

  Do you have things HP Envy 15-as027cl supports two HARD + SSD memory drive?

  See above. I said this:

  If it comes with a m2 only, it won't have a caddy hard drive and cable, and those who are very difficult to locate.

  If the answer to your last question is 'no '.

• Want to M6 1225DX: updated HP Envy M6 1225DX wireless adapter

  I'm looking to upgrade the card wireless in my HP Envy M6 1225DX.  Here are a few features on the machine:

  Product # D1E93UA #ABA

  CPU: Intel i5 - 3230M @ 2.6GHz

  RAM: 8 GB DDR3 SDRAM

  GPU: Intel HD graphics 4000

  Wireless: Ralink RT5390R 802.11bgn Wifi adapter

  OS: Windows 7 x 64 (I know that HP does not support this)

  BIOS version: F.26

  The wireless adapter that is currently installed (Ralink RT5390R) only supports SISO and the download speed tops out around 18-20Mbps.  I'm looking to replace this card with a card compatible MIMO and bluetooth, for example a 7260 Intel.

  I read on several forums that HP basically whitelists some cards wireless in BIOS.  I have reviewed the maintenance manual and it has a list of compatible cards I listed below:

  • Atheros WiFi 802.11b/g/n 1 × 1 9485GN and 3012 adapter Bluetooth 4.0
  • Atheros 802.11b/g/n 1 × 1 Bluetooth adapter Combo WB225
  • Broadcom 4313GN 1 × 1 WiFi and Bluetooth 4.0 adapter 802.11b/g/n 20702
  • Module Intel Centrino Advanced-N WLAN 6230
  • MediaTek MT7630E 802.11bgn Wi - Fi adapter and adapter Mediatek Bluetooth 4.0
  • 1 × 1 Ralink RT5390R 802.11b/g/n WiFi adapter
  • RALink RT3290LE 802.11b/g/n WiFi and Bluetooth 4.0 Combo Adapter 690020-001 1 × 1
  • Atheros AR9565 1 × 1 WiFi + Bluetooth 4.0 Combo Adapter 802.11b/g/n
  • Module Intel Centrino Advanced-N 6235 WLAN for the Japan only

  These are the only cards I can run in this machine?  I also read somewhere that HP no wireless adapter like whitelisting in the BIOS, and if that's the case, would a BIOS update fixed this problem?

  I've been watching the 7260 Intel, but I don't know if it would work and would not order it and he has no job.   This adapter could work in this phone or I am I'm confined to the list given in the service manual?  If I'm limited to the above list, no matter what recommendatins to the adapter that will give me what I'm looking for?

  Basically, what I'm looking for in a wireless adapter is:

  • Supports A/B/G/N and AC at 2.4 Ghz and 5.8 Ghz bands.
  • More high speed possible
  • Bluetooth 4.0
  • 1/2 height Mini PCIe form factor

  Thanks for the help

  Hello
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your m6-1225dx HP ENVY Notebook and supported wireless cards. Yes, these are the cards that are supported in your notebook and fortunately will work with your graphics card and processor.  Some say that just restore BIOS to factory default help if you decide to go with your choice.

  You could restore the BIOS withthis document by selecting the reload the default BIOS settings.

  Thank you.

• Envy 15 k233ca: memory upgrades and hhd

  I'm trying to find out if the k233ca has a capacity of upgrade. By reading the plug here and there, the motherboard has 2 slots and there is 1 to 8 GB 1600 Mhz DDR3L module.

  When I called customer service to see if there was a favorite of the seller, they told me that the Ram was not expandable as the machine has only 1 location and tot of the MB does support up to 8 GB.

  Well...

  As a technician, I'm leaning towards believing the former rather than the latter, and since I did not open upward again, I checked Everest and it shows 2 slots, one with a 8 GB module and a location empty.

  Before I open the unit to find this information for me, I wondering if someone is more familiar with this device, or can point me to a more detailed specifications and current page?

  My questions are specifically,

  1. What is the model of the motherboard more precisely and will support 16 gig?
  2. This is a configuration of dual slot, so I can use 2 x 8 GB modules?
  3. Can I use a low latency Ram? replace the original module to match of course...
  4. Is there a QVL for this MB?

  Now for the HHD, a question... This machine will support SSD?

  Based on the HP ENVY 17 Notebook PC HP ENVY 15 Notebook PC HP ENVY Notebook PC - Maintenance and Service Guide of m7, it seems you should be able to switch to 16 GB of RAM and an SSD as follows;

  Memory

  Two SODIMM slots
  Support of the DDR3L - 1600 MHz Dual Channel
  Supports up to 16 GB of RAM in the following configurations:
  ● 4096 MB total memory (4096 × 1).
  ● 8192 MB total memory (4096 × 2)
  ● 8192 MB total memory (8192 × 1).
  ● 12288 MB total memory (8192MB 4096)
  ● 16384 MB total memory (8192 × 2)

  Hard drives

  Supports 6.35 cm (2.5 in.) 9.5 mm hard disks (. 37-in) and thicknesses of 7.0 mm (. 28 - in) (all hard drives use the same bracket)
  Storage SATA m2 (Port0)
  Accelerometer / HDD protection support
  Supports the following drives:
  ● 1.5 to 5400 RPM, 9.5 mm
  ● 1 TB 5400 RPM, 9.5 mm
  ● 750 GB 5400 RPM 9.5 mm
  ● 500 GB 5400 RPM 7mm / 9.5 mm for PC portable HP ENVY 15 only
  The hybrid configurations
  ● 1 TB 5400 + 8 GB NAND hybrid disc HARD 9.5 mm
  ● 750 GB 5400 + 8 GB NAND HARD 9.5 mm drive hybrid
  SSD drive

  Only configured with up to 8 GB system memory:
  ● 256GO M.2 SATA (MLC)
  ● 256GO M.2 SATA (TLC)
  Double storage configuration for the HP Envy 17 computer models
  ● 1 TB (5400) 9. 5 mm + 256 GB SSD SATA in m2 (TLC)
  ● 1 TB (5400) 9. 5 mm + 256 GB SSD SATA in m2 (MLC)

  Please note that it requires an extensive disassembly and reassembly of the computer to make these improvements, including

  remove, replace or loosening the screws up to 83. Also, note that other RAM/HDD/SSD configurations can run on this computer. It may be possible to have a facility that includes 16GB of RAM, a standard SATA III SSD and/or m2 SATA SSD card, but you will have to experiment to see specifically what works on your model.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Equium A60-692: update Bios to allow more memory

  Hello.

  I just received the laptop above, and it is slower than the evolution!

  Just checked the specs here - http://uk.computers.toshiba-europe.c...8&DISC_MODEL=1 and it says it is not expandable up to 1280 mb

  Someone told me that an update of the bios might allow for more memory, is it possible on this model and how would I go about this?

  Thanks in advance

  > Someone told me that an update of the bios might allow for more memory, is it possible on this model and how would I go about this?

  Someone is wrong, there is hardware limitation and the Bios Update will not allow you to expand the memory

  See you soon