Updated labmanager & vCenter

Similar Questions

• Version thrown in update with vCenter update Manager 5

  Hi all

  Can you get it someone please let me know what version of ships with update manager vCenter 2.5 update 5?

  Concerning

  Jam

  Jam,

  She threw 6.1.6.

• vSphere 6.0 + is not compatible with vmware vsphere Update Manager vcenter you install.

  Hello

  We run with vCenter 6.0 version 6.0.0 build 2997665.

  Installing Update Manager in different windows server with vCenter 6.0 U1 installation media.

  During the installation of Update Manager, it gives below error.

  Error: Vcenter is incompatible with vmware vsphere Update Manager that you are installing.

  Problem has been resolved after downloading installation VC VMware-VIMSetup-all - 6.0.0 - 2800571.iso, which is compatible with running VC build version.

• 6 6 Update 1 vCenter update

  I can't update vCenter 6

  I installed VMware vCenter Server Appliance 6. So I try udate vcenter 6 Update 1.

  Gendarmerie:

  VMware-vCenter-Server-Appliance-6.0.0.5120-2800573-patch-FP.iso

  
  Connect to the console:

  
  Login as: root
  VMware vCenter Server Appliance 6.0.0.10000
  Type: vCenter Server with an embedded controller Services Platform
  Keyboard-interactive authentication.

  Password:

  Last login: Tuesday, January 5, 22:08:22 UTC 2016 10.0.0.210 on pts/0

  Last login: Tuesday, January 5, 22:28:27 2016 of 10.0.0.210

  Connected to the service
  * API: 'api help list.

  * List of Plugins: «help list pi»

  Allow to access BASH: "shell.set - active True."

  * Launch BASH: "shell."
  Command > firmware install iso - acceptEulas

  [2016 01-05 T 22: 28:30.005]: staging of packages of software patches of ISO

  [2016 01-05 T 22: 28:30.005]: ISO mounted with success

  [2016 01-05 T 22: 28:30.005]: check the staging area

  [2016 01-05 T 22: 28:31.005]: running pre - stage.py

  [2016 01-05 T 22: 28:31.005]: payload validation update software

  [2016 01-05 T 22: 28:31.005]: Validation successful

  [2016-01-05 22:28:31, 650]: treatment of software update payload packets 54/54

  [2016 01-05 T 22: 28:32.005]: (3) staged with success packages

  [2016-01-05 22:28:32, 028]: package 3/3 copy software

  [2016-01-05 22:28:32, 123]: duration test transaction...

  [2016 01-05 T 22: 28:33.005]: installation process failed

  [2016 01-05 T 22: 28:33.005]: ISO unmounted successfully

  Command >
  

  What it can be?

  The hotfix mentioned in your message (VMware-vCenter-Server-Appliance-6.0.0.5120-2800573-patch-FP.iso) is not one for "vCSA 6.0 Update 1 b", but for "vCSA 6. 0 b "(sans mise à jour 1)." The ISO image patch for 'vCSA update 1 b' is 'VMware-vCenter-Server-Appliance-6.0.0.10200-3343022-patch-FP.iso '.

  André

• Update and vCenter Device Manager

  Anyone can confirm, the unit against the windows of vcenter does not update Manager contain? We have licensed Essentials and for 2 downloads, the device seems to have several missing features compared to the windows version? I'm under unit now, and there is no option to "search for updates" when I right click on the host. I just want to confirm that this is the case until I am forced to switch to a platform of Windows riddled safety...

  Update Manager is only available as Windows application/service. In order to manage, you need either vCenter Server 6.0 Update 1 (see vSphere Update Manager (VUM) 6.0.1 - integration of customer Web - VMware Blogs) or the vSphere of Windows-based Client.

  Anyway, with an edition of Essentials, which is a maximum of 3 guests - I would consider actually to patch the host manually rather than to the maintenance of an installation of the Update Manager.

  André

• Update Web VCenter Manager Client Plugin

  I installed as a device of Vcenter Update Manager installed on a windows server 2012.

  When I go to the web client to VCenter I do not see the Web plugin for Update Manager, how can I install?

  John.

  that shows your Client Plug-Ins page?  Mine looks like this: -.

  

• Updated VMware vCenter Operations Manager tools

  Hello everyone, I just use Citrix Xenserver to VMware vCenter with Operations Manager 5.8.4.  I've looked everywhere and cannot find an answer to this.  Is it possible to update VMware tools in the vCOPS TIME?  I just started my new environment with v8 of Veeam backup and he lets know me that VMware tools are outdated.  The only reason why I ask because, coming from Citrix Xenserver v6.2, whenever a device from the virtual computer is provided by Citrix, you're stuck with the tools provided in this unit until they update the device.

  If it's good to update the VMware tools, it's as simple as opening the console to each virtual machine in the vApp and he tell the ' Install/Upgrade Vmware Tools?  Or is there a more complicated step?

  Thank you

  Brett

  As far as I KNOW, the VMware tools upgrade is not recommended on vCops.

  This breaks the device and you can ignore the message of the VMware tools obsolete.

• Number of the person responsible for the update by vcenter server

  Maximum Update Manager how we can integrate with a vcenter server?

  One to one mapping between vCenter Server and Update Manager.

• Get the message of sufficient permissions to retrieve the data when I try to access Update Manager vCenter 5.5

  I've recently upgraded to VMware 5.5 and I'm having a problem with the Update Manager for where it says I don't have permissions to use it.  The plugin installs fine without errors.  I myself install as administrator, but it still doesn't let me use it.  I am using vCenter to manage my guests.  Any suggestions?  Thank you!

  Ty

  To resolve this problem, update manager must be registered for the vCenter Server. This can be done by reinstalling Update Manager, but it can also be done without having to re - install.

  Step 1.

  Remove vCenter update manager plugin by following VMware KB: suppression of the unwanted plugins to vCenter Server

  Step 2.

  To connect to the server on which the Update Manager is installed

  Open the Update Manager utility that is located in your Update Manager installation directory: VMwareUpdateManagerUtility.exe (located by default in C:\Program Files (x 86) \VMware\Infrastructure\Update Manager\)

  Select Save again with vCenter Server

  Enter your credentials to the vCenter server and select apply

  Once the operation is completed successfully, you are prompted to restart the Update Manager service.

• 5 and update manager vCenter

  Hello

  I installed vcenter and update manager as a virtual machine host.

  Now when I want to use the update patch of the host Manager, it takes all the vm to stop.

  Obviosly if I stop the VM guests, this includes the vm vcenter himself who then stops updates.

  I tried to connect directly to the host without vcenter but then there is no Update Manager.

  Any way around this?

  Thank you

  Chris

  I would start by setting up the vmware in your main site environment - Essentials you are able to use the vmotion and HA - vmotion you will deal with the current issue - would you be able to vmotion virtual machines on a host and update without havomg yp sjut down virtual machines. With HA you will be covered in the event of hardware failure - if an ESXi host to crash the system VMs automatiically will restart on the remaining hosts.

  Bit please be aware vmotion and HA require shared storage - either SAN (iSCSI and storage FC0 or NAS/NFS -

• Determine the Version of "Update" to vCenter

  Hi all

  In the vSphere Client, when I choose 'Help' - 'about VMWare vSphere"I can see a version like VMware vCenter Server Version 4.1.0 Build 258902.

  I just want to know what day version ; in regards the things readable as update 1 or 2 update and so on. Not a build as 16458932279 number. I'm not shure if there is 1 update is installed or not on my server. If Yes: would be written "Day 1," the subject of window or is it still just a build number? How will I know in this case what version of update, I installed on the basis of only a build number?

  thx for your help and best regards

  will not get you "Update" information, only build of informaiton.  This guide may be useful

  http://www.VMguru.nl/WordPress/build-numbers/

• No update since vCenter and ESXi 4.1

  Hi all

  I've updated vCenter and all my ESXi hosts to version 4.1 about two months ago. However, there are has still no updates listed in vCenter Update Manager

  Are there really no update?

  I have to manually edit something else? Repositories?

  There are these two planning standard for Christiane and updates non-critical host, however, I can't edit them. Both contain only updates for ESX400-...)

  Thanks in advance!

  no update as of yet for 4.1

  http://www.VMware.com/patch/download/

  You can register for updates here

  http://info.VMware.com/content/subscription

• Installation of VMware Update Manager (vCenter 4) and authentication

  Hi all

  This should be fairly simple.  Can someone please confirm something for me?

  In VI3 when you install VUM and enter a u/p that is used for installation only.  Is this still the case with vSphere?  The installer says now... "Update Manager will need this information to connect to the Server vCenter at startup."   It is not clear, it's just for starting the installer or the start of VUM whenever the service starts?

  See you soon

  Dan

  It is only for the installation process.

  VUM service (such as other services) runs with the credentials of the SYSTEM.

  André

• The upgrade of the VCenter 2.5.2 update 4 vCenter 4.0

  I am preparing to update our virtual Center Server.  I read in the guide.  It seems straight forward.  I have listed the steps that I follow. Any comments or advice would be appreciated.

  1. our Oracle database and resides on another server.  The DBA will upgrade the 11g database before the upgrade to vCenter.  This was recommended in the guide

  2 upgrade vCenter Server - our virtual Center Server is a physical box.  We currently have loaded on the Server Update Manager, converter, and Capacity Planner.  I watched the video of upgrade and it suggested to have these additional software loaded on another server.  Is this a good practice?  Does anyone have these load on their virtual Center Server?

  3 HA\DRS - I have three HA\DRS clusters.  Problems with this reconfiguration after the upgrade?

  4. I manage 3.0.1 by 3.5 hosts with the new version of vCenter.  Fix ESX, one host at a time in the coming months.  Expected problems?

  Thanks for any help!

  2 upgrade vCenter Server - our virtual Center Server is a physical box. We currently have loaded on the Server Update Manager, converter, and Capacity Planner. I watched the video of upgrade and it suggested to have these additional software loaded on another server. Is this a good practice? Does anyone have these load on their virtual Center Server?

  Don't believe the hype.  What's weird, people have no problem to put 4 vCPU virtual machine and 16GB of RAM and SQL server, but on a PHYSICAL machine, they wince over 2 services on the same machine... I find it VERY strange.

  We UM, Capacity planner, blah blah converter on the same machine, no problem.  They are on one different server other than VC however, only because at the point where I was trying to diagnose a problem with the Windows machine, and it turned to be a driver for the CARD, which has long since been corrected.  When I updated to 4.0 VC, so these are all on the same box... Well good except for the UNIFIED messaging and it is only because the other machine has back-end storage / DB that I want to use instead, but this isn't a problem.

  > 4. You will manage 3.0.1 by 3.5 hosts with the new version of vCenter. Fix ESX, one host at a time in the coming months. Expected problems?

  Looks like we're on the same timeline.  I am doing a server tonight, using the VC... host update utility that should be fun.  So you have to compare notes.

• Server Update Manager vCenter - host supports

  I am currently preparing our environment for the upgrade to vCenter Server v2.0.2 to Update3 V2.5

  Currently, we only have 3.0.1 and 3.0.2 hosts and I'm busy to patch the 3.0.1 hosts to satisfy the prerequisites for the upgrade of the vCenter server.

  My question is, Update Manager supports the correction of the old armed forces or is it only 3i and 3.5 hosts it supports.  I read it somewhere but can't seem to find a definitive answer anywhere

  Thanks in advance for any help you can give

  See you soon

  D.Misbehavis

  Hi Davis,.

  Take a look at the compatibility guides, you'll find this info.

  VC 2.5 U3 patches ESX 3.03, 3.5Ux and ESXi

  Have fun.