Updated patch or fix, even a pilot?

Similar Questions

• Update Flash keeps appearing even with disabled updates

  We have a remote desktop Services environment, and we have disabled the Flash update in Control Panel. This is done by a CPL (FlashPlayerCPLApp.cpl) we have at the time of installation.

  

  The box "never check for updates is selected.»

  We have also deployed mms.cfg with the following content:

  AutoUpdateDisable = 1

  AutoUpdateInterval = 0

  However, users always receive a notification of update. It started with 15 Flash. How can we configure Flash that he actually honors the settings of Control Panel?

  

  Hi mbovet-rzg,.

  We had a bug where, on some systems, users continued to get the update of the notification, even if updates were disabled.  This bug has been fixed in a newer version of the Flash Player than what is currently installed on the system (15.0.0.189 according to your screenshot). 15.0.0.189 is old enough and we have published many patches of security since then.  Please install the last vesrion, 17.0.0.134.  It has not only the fix for the behavior you observe, but it contains also later that 15.0.0.189 is vulnerable to security patches.

  In addition, there is no need to 'move' the FlashPlayerCPLApp.cpl from one system to the other.  All that is necessary is to disable AutoUpdate updates via the mms.cfg file, which tells you that you do.

  --

  Maria

• KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

  KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

  Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

  -AMD/Radeon APU

  -Windows 8 6.2.9200

  -See sysinfo below for more details

  The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

  Additional troubleshooting measures to date include:

  -Uninstall the software OEM AV (Norton), then by restarting.

  -Temporarily disable all the features of Windows Defender.

  -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

  -Realization of an analysis of the SFC system (with no error found).

  Results: The Windows Update full KB2887069 with a failed State and produced the following results.

  2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
  identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
  the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
  2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
  2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
  2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
  2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
  2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
  2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
  2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
  2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
  2014-11-15 19:35:19:795 880 1-28 Service *.
  2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
  2014-11-15 19:35:19:795 880 1-28 Service *.

  I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

  ACTIONS

  [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

  4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

  Note-online scripts are good for IE9, IE10 & IE11, too,

  5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

  5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

  6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

  9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.

  • Upgrade to Win8.1: FAQ
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
  • The upgrade to Win8.1 tutorial
  
  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
• What's new in Win8.1?
  http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• Notes crashing with El Capitan 10.11.6. Are updated recent bug fixes.

  Notes crashing with El Capitan 10.11.6. Are updated recent bug fixes. It always sends Apple incident reporting, so I am surprised that they have not yet set. This is a brand new Apple iMac computer, I went for the best to have a trouble-free operation (I hate LAGS). But the computer hangs out sometimes which is disappointing. No one knows what to do to keep my computer running efficiently? In addition, someone at - it a solution to the issue with Notes crashing?

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the HD recovery immediately after that the chime press the command and R keys until the Utility Menu appears. Choose disk utility and click on the continue button. Select the withdrawal (usually Macintosh HD) volume entry in the list to one side.  Click first aid button in the toolbar. Wait the fact button appear. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Download and install the update of OS X El Capitan 10.11.6 Combo.
  6. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click on the continue button.

• What this new update will be fixed?

  What this new update will be fixed?

  In what way?

• Updates and bug fixes for Windows 6.3

  Hi all

  Just a quick question. Want to install some applications on a friends computer and I noticed that its operating system is Windows 6.3. Am not familiar with it, as I've stuck with XP and Windows 10 missed a lot through the BONE.

  In any case, outside an operating system upgrade most recent there for updates, patches, etc. for old Windows 6 beyond version 6.2?

  Thanks in advance for any advice.

  J. Arthur Lewis

  You may or may not remember as "Meriweather" in my previous incarnation...

  You mean they have installed... Windows 8.1?

  Version of the operating system

  https://msdn.Microsoft.com/en-us/library/Windows/desktop/ms724832%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  Operating system	Version number
  Windows 10	10.0
  Technical overview of Windows Server 2016	10.0
  Windows 8.1	6.3
  R2 Windows Server 2012	6.3
  Windows 8	6.2
  Windows Server 2012	6.2
  Windows 7	6.1
  Windows Server 2008 R2	6.1
  Windows Server 2008	6.0
  Windows Vista	6.0
  Windows Server 2003 R2	5.2
  Windows Server 2003	5.2
  Windows XP 64 - Bit Edition	5.2
  Windows XP	5.1
  Windows 2000	5.0

  Windows 6.0 would be Windows Vista (in terms of home consumer) and which is still supported (for this purpose planned security patches) to 04 11, 2017.

  So I'm a little fuzzy on what you ask, precisely-, but Windows Vista has MANY patches for him and them again gets about once a month and goes until the early-to-mid-2017.

  Windows 7 (the other system of version 6.1) is good through 2020 at the beginning of this way.

  So, do you mean this:
  http://answers.Microsoft.com/en-us/profile/c98c7dfa-68df-4ef1-8751-75d2c967129c#user-profile-tab-activity

  ... is you?  Why the new account?

• Must the updates and hot fixs remain on the hard drive after having been loaded? Is the information provided in the operating system?

  Must the updates and hot fixs remain on the hard drive after having been loaded?  Is the information provided in the operating system? Or do the lonely stand.

  Original title: need for disk space

  Here are the official specifications of Toshiba for your PC...

  http://support.Toshiba.com/support/staticContentDetail?ContentId=638405&isFromTOCLink=false

  All interface PATA (IDE) connectors are a standard 40 pin.

  I know that there is no restriction on the mixture of ATA drives with different speed capabilities and no restrictions on what cable you use, whether 40 wire or 80 strand (but still 40 pins).

  Faster drives will only work at the speed of the slowest car on any cable and 80 strand cables are needed to make ATA66 or higher drives run at their native speed.

  In addition, no player can work faster than the motherboard chipset permits, in your case ATA66.

  My provider of trade has still some disks 3.5 '' PATA in stock, but these are becoming harder and harder to find. Indeed, it is possible that production has ceased and that suppliers are just exhausted stocks.

  I can certainly say that, when repairs this technology were more frequent, I never had problems with discs theoretically faster on the same cable as slower drives, nor by using faster on 40 cable strands discs. In fact, of many penny pinching manufacturers (some of them major) regularly used for the optical drive and hard drive on the same cable as the motherboard has two connectors, resulting in a decrease in performance on the disk hard (although most of the people would not have noticed the difference). Sometimes, the cable would be 40 strand (understandable if you are penny pinching) and sometimes the cable would be 80 strand (laughable if you are penny pinching because they are [were] more expensive).

  Pass your question about vacant below the sound card. Unless your text confused me, this space is for expansion cards no disk drives. Space that you reference is probably to the back of the PC. Hard drives are normally located toward the front of the dedicated PC "berries". Unfortunately, I could find no photo on the Toshiba site, and still less those internal.

  Tricky

• Windows xp update will not fix 2481109 KB AND KB 2814124 LIGHT MONEY thanks

  I try and try to update and still get the same failure.

  Windows xp update will not fix 2481109 KB AND SILVER LIGHT 2814124 KB

  Thank you for the help in advance,

  Hi Maureen,

  1. What is the full error message/code?

  2 are you able to install other updates successfully?

  This issue could be due to corruption, updates or files which he is associated.

  Method 1:

  Check out the link and follow the steps in the article:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602#top

  Method 2:

  Try to install the updates manually.

  Reference:

  Update security for Windows XP (KB2481109)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=11625

  Update of security for Microsoft Silverlight (KB2814124)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=36946

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• How to download a version of XP SP1a does not require an internet connection to install patches and fixes?

  I try to use an older laptop that originally supplied with XP Home Edition.  I had already installed all service packs.  I try to install XP SP1a to be able to then install XP SP3.  I downloaded SP1a like save and launched the executable service pack from my download files.  He keeps the slightest error with a message that it was impossible to connect to the server.  A solution indicates that you can download a version of SP1a that requires no connection to internet to load the patches and fixes.

  I was unable to locate this download on the download of Miucrosoft Center.  Someone has a link to the SP1a download file I need to run?

  Thanks, Dave

  Hello

  You do not have service pack 1 or 1A, it is included in service pack 2, which can be downloaded here...

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  .. .and service pack 3 here...

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Don't worry about the text which says that these are network installs, or the text which says do not use if you are only up-to-date a PC, they work very well for any installation of XP.

  Tricky

• y at - there a patch to fix office tile that is not in the subway

  y at - there a patch to fix office tile that is not in the subway

  [Moved from comments]

  Try to use a prompt with admin privileges, type SFC/scannow and press on enter, insert Windows Media 8 if requested. If this does not resolve the problem, you may need to do a refresh. NOTE the space in the cmd. hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• A statement UPDATE changes the line if the update changes the column even value?

  HI -.

  I have a main classification and the corresponding audit table. I have a trigger. I created using the suggestion:http://www.runningoracle.com/product_info.php?products_id=211

  Now the problem that I am facing is that: if I run the same query (same value) update on the main table for n times (with the same data)... my audit table is updated with a new record every time. He is not able to determine that the value is the same.

  My goal is to load the audit table data if the value in a cell in the main table is really have changed.

  A statement UPDATE changes the line if the update changes the column even value?

  Best regards

  I have a main Table and the corresponding Audit Table. I have a trigger. I created using the suggestion:http://www.runningoracle.com/product_info.php?products_id=211

  Why?

  You try to resolve what made you what are the PROBLEM that select as the solution?

  Now the problem that I am facing is that: if I run the same query (same value) update on the main table for n times (with the same data)... my audit table is updated with a new record every time.

  Yes - it is EXACTLY what you say that you wanted to do and EXACTLY what the code does in this article.

  He is not able to determine that the value is the same.

  I think you mean that the code does NOT check if the value is the same. You can certainly change the code to do this check. But I have a question to start with your need for such a solution.

  My goal is to load the audit table data if the value in a cell in the main table is really have changed.

  OK - then modify the code to check EACH COLUMN and compare its NEW value to the OLD value and insert only the table of audit if SOME (or columns you care specifically) have changed.

  A statement UPDATE changes the line if the update changes the column even value?

  It depends on what you mean by 'change the line '. Of course to update a column with the SAME value does not change the resulting data value.

  But the physical structure of the line, the location of the pieces of line and information in the header block (YVERT, etc.) will change. And, as others have said Oracle doesn't know and doesn't care, so if the new value of a column is the same as the old value will create redo, undo and the rest.

  Start over and tell us what PROBLEM you're trying to solve. Then we can help you find the best way to solve it.

• I can't open my new Canon Rebel T6i RAW files in Photoshop and need the patch will fix it in Photoshop Elements 9 and Photoshop CC 2015.

  Help!

  I can't open my new Canon Rebel T6i RAW files in Photoshop and need the patch will fix it in Photoshop Elements 9 and Photoshop CC 2015.

  Hi scottw30949849,

  The Raw of Canon T6i files are supported in Photoshop CC2015 which includes Camera Raw 9.1.1

  Here is the download link:

  https://helpx.Adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html

  However, you would not be able to install this patch for Photoshop Elements 9 as it is an older version on Photoshop Elements and it does not support T6i Cannon

  Kind regards

  Claes

• ESX updates/Patches

  We all know that Microsoft release security updates/patches, patches on Patch Tuesday, the second Tuesday of each month

  VMWare has a day of similar output, or are all updates of output generally ad - hox?

  U of VMware updates for ESX(I) lately come around every 3-4 months, but I don't think that there is a schedule set as "patch Tuesday".

  You can find here all press releases

  http://support.VMware.com/selfsupport/download/

• How to determine updates/patches installed

  How will I know what updates/patches are currently installed on a server ESXi 3.5?

  Here, http://www.techhead.co.uk/how-to-determine-the-vmware-esx-or-esxi-build-version , is a good explanation.

• How can I fix a symbol, such as a menu, border, fixed even scrolling?

  How can I fix a symbol, such as a menu, border, fixed even scrolling?

  Thank you

  Here's a simple example (both use case scenerios - vertical/horizontal bar)

  http://www.heathrowe.com/edge/scrolltop3/scrollTop.html

  Check the code for step > compositionReady, as follows, made this a 'move' element when the page scrolls

  $(window) .scroll (function () {}

  var element = sym.$("sidebar");

  element

  . Stop()

  . Animate ({"marginTop": ($(window) .scrollTop () + 30) + 'px'}, "slow");

  })

  Download the example here

  http://www.heathrowe.com/edge/scrolltop3/ScrollTop2.zip