Updated Windows and delete my work not saved!

Similar Questions

• Updated Windows and now I can not run other programs on my PC

  Updated Windows and now I can not run other programs on my PC!  What can I do?

  Hello

  ·          Update you installed before the problem?

  ·          Do you have a code error message when you try to run any program?

  If the issue took place recently, you can perform a system restore that will repair return the computer to the point while it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue. 2. in the System Restore dialog box, click on choose a different restore point and then click Next. 3. in the list of restore points, click a restore point created before you started having the problem, and then click Next. 4. click on finish.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Card chart-update Windows and the bluetooth works do not HP pavilion dv6

  Dear Sir.

  I've upgraded to Windows 7 Edition home premium to Windows 8 pro. Since then, my AMD radeon HD M 7400 series graphics card does not work. In addition, bluetooth also does not work. Please advise a solution. Thank you

  Can U tell me the exact message you get?

  Well, if you can tell me your system type, I can give you the link for the drivers you need to install on your system.

  Bluetooth: Have you tried pressing the hot key to turn off wireless / bluetooth service? who can install your bluetooth device.

  Concerning

  Shantanu

• Windows Mail deleted messages are not saved in deleted items

  original title: Windows Mail

  I read a msg, then delete, but can't find it in the elements removed subsequently. Does not all adjustments to display as it is set to show all messages. Last deleted msg is July 19, but have a lot since then.  has started sending the file as cannot afford to keep losing messages.

  1. Why are you keeping messages you want in a trash can?
  2. Tools | Options | Advanced | Maintenance. The first box is checked?
  3. In abolished posts display options, make sure that show all Messages is the only option checked.
  4. Try to compact and repair the database.  WMUtil http://www.oehelp.com/WMUtil/Default.aspx
  5. How to back up and restore Messages in Windows Mail
     http://www.Vistax64.com/tutorials/90298-Windows-mail-messages.html

• Why I can't update windows and fail. and the error is 0x8007001F

  Why I can't update windows and fail. and the error is 0x8007001F

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  and/or

  Claire on your temporary internet cache.

  and/or

  Rename the folder C:\Windows\SoftwareDistribution

  Click Start, choose run.
  In the run box, type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Click on stop.
  Stopping the service will take a moment.

  Rename the folder "C:\Windows\SoftwareDistribution":
  a. Click Start, click Run, type %any and then click OK.
  b. right-click on the C:\Windows\SoftwareDistribution folder, and then click Rename.
  c. Type SoftwareDistribution.old, and then press ENTER to rename this folder.

  Click Start. Choose run.
  In the run box, type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Click Start.
  Starting the service will take a moment.

  Restart if necessary and try and update again.

  You will notice that you will lose your history of updates, but it's not important.

  If everything works well again, you can delete the old renamed folder.

• Update Windows XP with sp3: does not light (error number: 0 x 80070424)

  original title: windows XP with sp3 update: does not light

  I had a virus security 2012, but deleted it and double check run in safe mode. But everything turns right, but went to update windows and its red shield at the bottom right but Security Center see the its 'market '. Then when MS and ran virus check and came back clean, so when updating the site and:

  [Error number: 0 x 80070424] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  Any help? Please

  windseaker,

  A KB was created for the error code 0 x 80070424 that appears when you install Microsoft Windows Update/Microsoft Update. The KB includes an automated Microsoft Fix it 50686 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/968002>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MS fix 50686.msi.

  06/22 / 1109:20:45

• I am trying to update Windows and I get the 0x080072F8F error code

  I'm trying to update Windows and I get the 0x80072F8F error code.  I tried to set the time, but that did not help.  I unchecked the revocation of the certificate and that did not help.  I can't go beyond a step at the entrance to .dll.  The one on the list has worked but when I tried as wintrust.dll he asks me what program to use to open this and others.  I even downloaded and bought RegCurePro, but which is not made and will ask for my money back because he did what he was supposed to.  Can I PLEASE get help on this?

  How many copies of Windows that you downloaded?

  First of all, I would like to inform you that only one copy of Windows can be installed and activated on a single computer.

  Follow the steps below to solve the problem;

  
  Method 1: Verify that your Internet connection is working

  This method is rated: moderately easy.

  To run this method, follow these steps:

  (a) click Start and then click Help and Support.
  (b) in the search help box or in the search online help box, type troubleshoot network and Internet connection problems, and then click Search Help.
  (c) in the list of topics, click on solve the network and Internet connection problems.
  (d) click the link that best describes the problem you are experiencing.
  (e) follow the suggestions to solve the problem you are experiencing.
  (f) when you are done, follow the steps in method B to reactivate Windows 7.

  If this method does not work for you, go to method 2.

  
  Method 2: Activate Windows 7 using the automated telephone system

  This method is rated: easy.

  To run this method, follow these steps:

  (a) click Start, and then click computer.
  (b) click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation section.
  (c) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (d) click on show me other ways to activate.
  (e) click on use the automated telephone and then follow the instructions that are provided.

  
  Method 3:

  Reset your TCP/IP stack

  (a) click Start

  (b) type in the box search command

  (c) right click command and select run as administrator

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

• Update Windows and everything is too big now.

  Update Windows and now the internet windows, icons and task bar are all too big. Have tried to reset for all sizes and nothing works. Any advice would be great. Thank you!

  Hi KaylaE,

  1. were you able to change the size of the icons?

  2 - do you mean that your icons do not work?

  You can read the following article and check if it helps:

  Icons change incorrectly in Windows

  http://support.Microsoft.com/kb/2396571

  Hope this information is useful.

• Windows 7 CD rom works not added new cd rom Bios same says its currency manager it says its there, but a explanation mark.

  Windows 7 CD rom works not added new cd rom Bios same says its currency manager it says its there, but a explanation mark. Tried to remove drivers and rebooted in safe mode, the same still seems a conflict somewhere, but how do I find and fix it please.

  Try to remove the UpperFilters value. by following these steps:

  Copy and paste the following text in Notepad and save to a .reg file (save with the .reg extension and give a name like fixcd.reg):

  First create a system restore point, and then double-click the saved .reg file, add to the registry and restart the computer.

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}]
  "UpperFilters" = -.
  'LowerFilters ' = -.
  

• My computer won't recognize bluetooth headset! Error message 'Discoverablilty and connectivity settings were not saved' and 'Bluetooth Exchange folder is not found' by changing the properties of bluetooth

  Original title: my computer won't recognize bluetooth headset!

  When I checked "Allow bluetooth devices to find this computer" under the "Option" menu, I got the error message "Discoverablilty and connectivity settings were not saved. Another message error I got is "Bluetooth Exchange folder is not found".  Although I copied this file from my backup data files, the problem still exists.

  I used to use able to connect to my computer with the headset.

  Please advise me what I have to do.

  Hi Venturer016,

  Remember to make changes to the computer before this problem?

   

  Method 1: You can follow the steps mentioned in the link below

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When uninstall windows 10 my defrag works not (pro 7)

  When uninstalled windows 10 my defrag works not (pro 7)

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  You can try to manually initiate:

  Click Start > computer > click with the right button on your hard drive > click Properties > Tools tab > optimize drive.

• I've updated Windows and still cannot access Adobe export.  Always get message to Windows Update.  What should I do next?

  I've updated Windows and still cannot access Adobe export.  Always get message to Windows Update.  What should I do next?

  Hi dianef58361091,

  Please try to use the Adobe service export to PDF Online https://cloud.acrobat.com/exportpdf . Make sure that you sign in using your Adobe ID

  For you, Windows Update problem, I will recommend you to contact the Microsoft support team.

  Kind regards
  Nicos

• I downloaded just standard CS6 for windows and that you do not have an .exe for the installation file. I have a 7z file and an application file that I used to extract the 7z files. I am now at a fixed support.

  I downloaded just standard CS6 for windows and that you do not have an .exe for the installation file. I have a 7z file and an application file that I used to extract the 7z files. I am now at a fixed support.

  Hello

  You must download the file [.7z] 1 and 2 [.exe] file. Once downloaded, keep both files in the same folder.

  Then run the .exe file and it will extract the CS6 Installer for you. With which you can install your software CS6.

  For CS6 direct download link: https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also check this link: https://helpx.adobe.com/creative-suite/kb/cs6-install-instructions.html

  In the case of additional assistance, feel free to contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  I hope it helps.

  P.S. If you use the adobe forums, please check useful/correct responses of staff or assistance, if there is.

  Concerning

  Ludo has

• FAQ (26): I installed a different version/version of Windows and now SDM will not show me updates.

  I installed a different version/version of Windows and now the SDM does not work in "Update" mode

  This can occur when some system that HP did not specifically tests with the model is installed and often happens with models and Windows Ultimate edition (or even 64-bit editions on some older models) before Windows 8 Ultimate.
  
  Because SDM detects the new operating system, but it cannot match in the SDM catalog, he (SDM) will disable mode "Update."  However, please note that you can still use SDM mode 'All products' to download your SoftPaqs by doing as follows (the Probook 4730 s is used as an example):

  1. Press the "view all products" in the SDM toolbar
  2. If a dialog box warning that "no operating system have been selected, then skip to step.
  3. Press OK to close the dialog box.
  4. Check the «Microsoft Windows 7 Professional 64 Edition»
  5. Click on the tab "language filter".
  6. 'English - International' is checked.
  7. Press the OK button.
  8. Now, expand the tree on the left side of the SDM application by selecting the following:
  9. HP Probook Notebook PC Series 4700
  10. HP Probook 4730 s Notebook PC
  11. Microsoft Windows 7 Professional Edition 64
  12. Check the box 'international - English.
  13. Press the button "find available SoftPaqs.
  14. After "things calm down", click on the button "See the last SoftPaqs" at the top right of the application of SDM.

  The latest list of the Softpaqs for your model should now be displayed. We recommend that you download all listed SoftPaqs. This whole new way SoftPaqs are released for this model will appear on the top list titled "Available SoftPaqs" display.

  To install a SoftPaq after downloading, do the SoftPaq to the ListView "Downloaded SoftPaqs" right click and select "install SoftPaq.

  Important note: most SoftPaqs listed using the method above should apply to your model, but a small number of SoftPaqs might not be applicable to your model due to the offers of different material for your model. This means that not all listed SoftPaqs will install on your model and that is normal.

• I've updated windows and now my computer does not connect to the wireless network.

  I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

  Hello
   
  You can follow below link that can help you to solve your problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702