Updates failed. Do not configure.

Similar Questions

• Download updates but is not configured!

  I tried that dates back to another date but still not set up.  Any help would be appreciated

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

• HP Slate 6 update failed. Not started. Urgent please.

  Dear Sir/Madam,

  I received today a new update of the system. my camera does not open after that you install.
  just in the recovery menu appears with a constant dead android icon.

  Please
  Where can I download the recovery file, I need to reinstall my device.

  give me a link please for these files

  my camera,

  HP SLATE VOICETAB 6 6004EN

  NMR: HSTNH-B19C

  P/N: G3N01EA #ABB

  Hey @OrangeRanger,

  The update.zip packages were added on the site last week. You can find images of recovery for your Tablet here:

  • Google Android KitKat restore Image for HP Slate 6 VoiceTab - Europe, Middle East and Africa
  • Google Android KitKat restore Slate HP 6 VoiceTab - India
  • Google Android KitKat restore for HP Slate VoiceTab 6 - Latin America
  • Google Android KitKat Image Restore for HP Slate VoiceTab 6 - Southeast Asia

  Thank you.

• HP Slate 6 VoiceTab II update failed. Not started. Urgent

  Madam/Sir

  I received today a new update of the system. My camera does not start after installation. I received only the recovery menu opens with a constant dead android icon. Where can I download a file recovery (ROM as update.zip?), I need to reinstall my device.
  
  Please give me a link to a good ROM. thank you in advance.
  
  My device:
  HP Slate 6 VoiceTab II 6300np
  P/N: J7Y39EA #ABB
  
  Best regards

  Hello AareBern1,

  Base on the package that I have provided to you (in the message), please copy this image (update.zip) on Micro SD card.

  Follow the update below step:

  1 power off the device

  2. press and hold Volume UP + POWER buttons to enter RECOVERY mode

  3. release the buttons when appears the HP logo

  4. Select: 'clear the Cache Partition' by pressing volume down and Power button to select

  5. Select 'apply the update of external storage' by the VOLUMEDOWN press, then press the POWER button to select

  6. Select "update.zip" and press the Power button to run

  7. don't do anything during the update. System will reboot when this step is complete. Do nothing when the system restarts. 8. This will show after the restart of the unit (2nd reboot), let this step complete and the system will restart once again.

• Update Windows 7 not configuration.

  I have a Pav dv6t and the last Windows Update will not show off the computer as it installs.  The computer turns off automatically.  At startup, it says it set up the update of the window, but it remains at 0% until it times out (thankfully) and allows me to connect.

  What can I do to get the update processed?

  This time, I went to HP and support, and click Help on software updates.  Have downloaded a few of them and the problem of Windows Update seems to have disappeared.  Thank you.

• I have Windows 7 Home Premium and there are 4 updates that will not configure and start take a huge time to failure to configure. How can I avoid these updates and continue to live?

  Midrosoft continues to update to windows 7 on my Acer.

  See this discussion: http://answers.microsoft.com/thread/cac55bf2-e271-e011-8dfc-68b599b31bf5 (which now includes a countless number of threads merged to confuse you more).

• Update failed - could not happen on servers

  Hi, so a bit of back story that can be useful: about 4 days ago I open Premiere Pro that had been updated to the latest version (earlier I think) and two screens of my death. Long story short, I spent all day everything works again - which included 10 reset Windows completely.

  When I went back to work I could download CC, connect and download apps, but I cannot update ANY of them.

  The most important example for me is that I have Premiere Pro v9.0 (paper plane) but I can't open the projects I was working with before that I had to reset windows.

  I was online since that time - research forums and troubleshooting Articles, used the CC cleaning, DIY tool with firewall settings and tried another WiFi network. Also tried my two old machines that I had previously used. Nothing. "Impossible to get on the servers.

  Is anyway to get updates outside the creative cloud or save a project elsewhere, but for an older version first?

  -Thanks in advance

  James

  Hello

  Please check the thread cannot reach the servers of Adobe, please check the firewall settings and try again

  If the above doesn't fix your problem, then ask your COMPUTER to whitelist the url from here: https://helpx.adobe.com/content/dam/help/attachments/Creative_Cloud_for_enterprise_Service _Endpoints.pdf? wcmmode = disabled

  Let us know if this helps!

• Creative cloud updates fail to install on Yosemite

  Hi - I use CC on a MacPro with the latest version of Yosemite. When I try to use the CC updater to install a new version of one or the other of the programs it fails with the following message: "Update Failed - could not retrieve the downloaded son. Try to press to redownload again. (U44M1: 210) ».

  Does anyone have a solution to this problem?

  Thank you

  MRG

  Hi Martin,

  Please see the thread below where this issue has been addressed specifically for MAC:

  Re: Solution for the AAM Updater error: U44M1I210

  Kind regards

  Sheena

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when trying to install Windows on Windows 8 updates

  Former title: windows 8

  Stuck into that and can't GET OUT! Failure of Windows updates. Restoration of the changes. Do not turn off your computer.

  Hello

  Please contact Microsoft Community.

  We understand the inconvenience that you are experiencing.

  1. How long it stays on the same screen?
  2. Windows Update is causing this issue?
  3. Have you tried to interrupt the installation at any time?

  When you try to install Windows updates, you get the following error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen. Suggest you not to interrupt this until he completely undo these changes.

  Please see the article below and see if this can help you.

  https://support.Microsoft.com/en-us/KB/949358

  Let us know if you need assistance.

• Windows Updates Setup error: "configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"stuck at 12%

  Just returned to windows 8, got my Norton security is and it.then update was of updates, so I can update to windows 8.1, but I got stuck when you try to update windows 8. It happened at 12%, and then tried to restart, it's 12% again.then what it says that windows does not not update reconfiguration do not turn off your computer.but I read someone post where they keyed off long the computer out the wireless USB mouse and took the card Sd, and the battery, put the battery back , but left the Sd Card and the mouse.and wireless USB, said, he started working.i tried all the this.and isn't yet working.it has been trying to run my computer hot.so I waited until what she calmed and it came again the same thing. ? Stuck in this mode.what do I do? I don't know if I should try just reset the computer of hole again or that it would be wrong.

  Original title: tried to update computers rose to 12%

  Hi Sandra,.

  Thanks for posting your query in Microsoft Community.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

  First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  
  

  The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to boot to the desktop with the help of the above article, I also suggest you try the following steps and check if the problem persists.

  Method 1:

  Try to run that Windows update utility provided in the following link.

  Problems with installing updates

  Try to install the updates after running the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

  (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command

  • DISM.exe / Online/Cleanup-image /Scanhealth
  • DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Update fails with the message "configuration updates stage 3 of 3 0% complete. Do not turn off your computer "

  Before closing my lap top, I did 8 automatic windows updates. The next day I had turned on the lap top and other 3 automatic updates had started to download, but when configuring the update a prompt indicates "configuration updates stage 3 of 3 0% complete. Do not turn off your computer ". A few moments later, the laptop restarts and then returns to "configuration updates stage 3 of 3 0% complete. Do not turn off your computer "and restarts again, this continues each time. I'm unable to advance in the journal on stage. Can you help me?

  Best regards Mrs Neil Dowdeswell

  Hi Neil,

  Method 1: Please try last known good configuration boot

  (a) restart the computer.

  (b) press and hold F8 while the computer starts up, which helps you to go to the Advanced Boot Options screen.

  (c) use the arrow keys to highlight and select the last well known configurations and press ENTER.

  This mode will take the last point restart managed computer that helps your computer to boot to the desktop.

  Method 2:  Please see below the article mentioned which may help you in the matter of fixing.

  http://support.Microsoft.com/kb/949358

   

   

  Hope this information helps.

• can not update fails to configure

  original title: cannot update

  I have windows vista, it keeps prompting to update when I after pc stops and restarts, he won't let not update come through doesn't say not configured corectly that I'd never had any problems before

  I did fix it it says it repaired, but when I try again the same retract update

  Run, how to reset components Windows Updates?

  http://support.Microsoft.com/kb/971058>

  Download and Save the fix it 50202 from the page above.

  Close all the open browsers and programs prior to execution of the fix it.

  When you run the fix it choose its default mode when you run it the first time.

  When it has finished, reboot.

  Then run it again and choose his Aggressive mode.

  Then reboot and see if the download updates now.

  UTC/GMT is 22:15 on Tuesday, September 27, 2011

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Original title: problems with updates

  I tried to install windows updates since the store won't let me update to 8.1 otherwise, but I've been miserably lacking 4 days in a row now. Commissioning Windows Update in Control Panel or the charm of parameters found 133 available updates and informs me that they will install automatically. If I then try to install progress remains at "downloading 0 KB", after a while updates are shown as installation. When the installation is completed I'm prompted to restart my pc. After the reboot if I'm greeted by the "Failure configuring Windows updates" screen for about an hour, then I'm able to reconnect to the desktop computer. I've been searching the forums for similar problems looking for an answer and trying different solutions, such as:

  Stop the update service then renaming or deleting the folder C:\Windows\SoftwareDistribution. No positive results on this one.

  Using SFC and DISM, first came up with my system is clean, the second did find and fix corrupt elements of store, but the problem persists.

  Download the tool for troubleshooting Windows Update from Microsoft page, who reported finding and repairing problens with service, but again without success.

  Reduce the installed updates at a time, in the instance that Windows can't handle most of the many updates at the same time. I tried this and it seemed to go well, but a strange point of interest that is so annoying is that several edits I checked are installing somehow, even if it is the only example that shows the number of updates being installed before restarting. Yet I always comes to the same conclusion. Failure of Windows updates the screen. What should I do?

  Hello

  Please update us with the State of the question. We apologize for the delay in responding

  1. You have a disk to install for Windows 8?
  2. Can you please explain what did you mean by update failed?
  3. Have you an error message when the update failed?

  I propose to perform the refresh once more using the Installation of Windows 8 disc, but before to perform updating please follow the procedure below

  Step 1: Repair of drive

  One of the best ways that you can check the alteration in the hard is to run a check disk on this subject. Please follow the steps below to repair the disk using the disk check.

  1. Open This PC by hitting on any fly in the Dashboard screen, quilting Search (or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking search), recording this PC in the search box, and then tapping or clicking on This PC.
  2. Press on and hold or click the drive that you want to repairand then tap or click Properties.
  3. Tap or click the Tools tab, and then, under error-checking, tap or click check.   You may be prompted for an administrator password or to confirm your choice.
  4. Follow the instructions. You may have to restart your PC after that error checking is complete.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Step 2: command tool (DISM) deployment image Service and management.

  By running this command, we can retrieve or modify information in an image. To run the DISM command, please follow the steps below:

  1. Go to the Windows Start menu.
  2. Type cmd on the keyboard.
  3. Right-click on the program from the command prompt and choose Run as administrator.
  4. The command prompt dialog box.
  5. Type the command Dism.exe / online/cleanup-image/Restore health and press ENTER.
  6. Wait for the command to run which can take about 30 minutes.
  7. After running the command, please try to make the backup of the system.

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• Updates will not configure Win 7 64 bit

  Windows Update will download updates of Win 7 will not configure them. After the reboot it will configure at 15% and then I get an error message that says: "failed to configure updates. To eat.  Windows 7 64 bit

  I sent a support email, but they cannot understand it. How can I overcome this?

  OK, I thought about it. I installed all the updates of security and then installed all updates of system at a time and they have all installed.

  Thanks for all your suggestions.

  Jerry

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• What should I do when my updates fail to configure? I can't even open a file that contains pictures in it unless it closes.

  I tried to install "major updates" but they were not for a long time.  Today, they were finally installed, but now they keep do not properly configure and go back.  Now, the mousepad on my laptop does not work and when I try to install the driver for it, he said also that I have to restart my computer to complete the installation and when I do, the updates fail to reconfigure and im in box departure.  Ive tried everything but try to reinstall because I don't have the disc here with me.  Is that what I can do because it becomes really frustrating that I can't even look at pictures that are in my folder of photos without windows stops.

  Hello

  1. what happens when you try to install the updates one at a time?

  2 when you install updates one at a time, that update are you facing issue with?

  You can file system Checker [SFC] scan on the computer that will replace the missing or corrupted files and try to install the updates one at a time and check...

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7