updates on vista does not

Similar Questions

• Windows Update on Vista does not.

  I have Windows Vista.  Windows Update does not work.  I get a message that I don't have the service.  I have a cable Services.  Any suggestions?

  I am currently using Microsoft Fix it.  It is said that it is the issue for more than an hour already.  Anyone know how to fix this?

  First things first...

  Assuming that your problem has not been resolved (or your question has not been answered to your satisfaction), please uncheck my previous answer as the ANSWER and score than the other answers as RESPONSE unless & until your problems have been solved (or you decide to post in another forum instead). Please do this now, before answering this post, to avoid any confusion. Thank you.

  

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  REPOST:

  1. when (date about) don't you buy the computer?

  2. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  3 a Norton or McAfee application ALREADY installed on the computer as you bought?

  4. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer When you bought it? (No matter if you have never used or activated).

  5. ALL other updates following listed in updates installed (not Update History) are they?

  (a) KB2633171, the KB2661254 & the KB2749655;

  (b) KB2744842 [or KB2722913], KB2705219, KB2712808, KB2731847 and possibly KB2736233.

  (c) KB2698365, KB2691442, KB2655992 & KB2719985 [or maybe KB2721691];

  (d) KB2685939, KB2658846, KB2659,262, KB2660649,562, KB2688338 & KB2690533 KB2676;

  (e) KB2393802 and especially KB971029.

  6. If Windows Vista Service Pack 2 is listed in the installed updates, when (the exact date) he was installed according to the history of the update (this time)?

  7 Adobe Flash Player v11.4.402.287 (or higher) installed? TEST HERE in USING INTERNET EXPLORER (ONLY!)-online http://www.adobe.com/software/flash/about/

  8. is Firefox, Chrome or any other alternative browser installed?

  9 have you ever had the opportunity to do a repair installation or a clean installation of Windows?

  10. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner Registry Cleaner)?

• Updates to Vista does not

  I have 2 desk top identical to the PC with 32 bit Vista software.

  no error code will not update on first unit.

  Second, works very well.

  When you are prompted to update the ms software, I select and get the usual display but don't see the green bar moving and never download or install anything.  There is no error code and nothing else happens.  Al other functions used on this PC work fine.  After 2 days with MS supports to the line, I have been abandoned.  Still no solution.  The people tried in vain.  Twice I was told this would be raised to "Level 2", but nothing happened.  Tried system restore, without change.  A ran Malware Bytes and Security Essentials with no error found.

  Did a complete backup of the drive to an external drive, a bit backward.  That would help?

  Contact: * e-mail address is removed from the privacy *.

  This afternoon, when I got home, downloaded and installed system 1 an update to IE 9 nothing do.

  Tried to go to the normal update and the same symptoms as before.

  Update: today (Sunday), I tried new update and it seems that everything works as usual.  During a game, I got the alert to restart the computer to complete the update.  The only thing I can do is to "Hide" all .NET updates.  I was told that the .NET files are used by software developers.

  Do not consider this post (for now).  After that 'hide'.NET all the updates, the UPDATE VISTA seems to work OK

  Thanks for the reply.  I'm NOT a computer scientist.  Also, I am 78 years old. and a little bit slower than in the past.  As stated in my comment added, I hid .NET all dates, and everything started working again...

  I said (or read somewhere) that is .NET software develpers only and I did not need.

  Thank you once again

• Automatic updates for Vista does not

  Hello
  For my Vista automatic updates do not work. It indicates that there are a few updates available to download but when I try to download, it fails and an error message appears.
  I tried to do some research on it and came across: http://support.microsoft.com/kb/940520
  This link has an option to download the file of repair (I don't know if I'm moving in the right direction well), but it asks me to choose between a 32 - or 64-bit version. And that brings me to the next question: how will I know which version of Vista, I'm on?
  Thanks in advance!
  Jean-Marie.

  Jean-Marie,

  Try the fixit tool to
  http://support.Microsoft.com/kb/971058

  Rick

• My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  They are only updated office or all updates?

  For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

  then manually download and install the same.

  If all updates, perhaps consider the following general tips-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• My update of Windows media player in windows vista does not play a mkv file.

  * Original title: about file mkv

  My update of Windows media player in windows vista does not play a mkv file, what do I do

  There are solutions out there, depends on how much you trust the software that you download. Here is an example for Windows 8, could work for vista too - make sure you have a full backup and AV before you start :)

  http://www.AddictiveTips.com/Windows-Tips/how-to-play-MKV-files-in-Windows-Media-Player-in-Windows-8/

• Vista does not load after that install Microsoft Update error the breakpoint of the exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.

  Original title: Vista does not load after you install Microsoft updates

  A Dell Inspiron. Updates have become available and have been installed. Next time the laptop was put on it does not start, it was all there on the screen was the dotted line down and after some time a black screen.
  I tried running the recovery and I get the message "the breakpoint exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.
  At the time that the laptop does not work and I have no idea what updates have been downloaded and installed.

  Hello

  Try the methods provided below and check if that helps.

  Method 1:

  Step 1:

  Try to boot in safe mode with network and check if you are able to boot to the desktop.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to start the office try to download and run a system scan using the Microsoft Safety Scanner full and check if that helps.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  See also:

  How to remove a computer virus?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Method 2:

  Clean boot

  If the problem does not persist in safe mode you can also perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  Try the system restore by using the System Recovery Options.

  The System Recovery Options menu is on the Windows installation disc. The menu can also be installed on your drive hard if your computer has preinstalled recovery options.

  For more information click on the link below.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Please keep us updated on the State of the question so that we can help you further.

• Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

  Hello

  I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

  Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

  Hello

  The CD/DVD drive needs no special drivers!
  Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

  Simply said, the Vista should recognize the drive without any problems.

  A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

  There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
  It of necessary to update the registry entry
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  1. click on the start menu.
  2. If it is a Vista machine in the search box type regedit without quotes.
  3. look for the registry key mentioned above.
  4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
  5. restart Windows.
  6 let me know if it works.

• my vista does not start! Help!

  Vista does not start on my computer compaq laptop. After a vista update automatic :(

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista does not start upward, with success since the closure complete

  Hello world

  I actually had this problem for a long time, but I'm just now to a point where I'm ready to take a lead in fixing it.

  I can't identify when it started, but Windows Vista does not start upward, with success of a full stop. He gets to the screen where, in general, the green bars will travel across the screen, but the green bars will not come. The screen looks dim and sits there, with the text of the copyright of Microsoft Corporation. So, after not having on the mound, I have to manually shut down the computer by holding down the power button. When I try to start again, told me to go through the Startup Repair tool. If I jump the repair, I just have to meet the same problem - a computer that will not go beyond the screen "green bar".

  So, I do the Startup Repair, and told me what I do for the restoration of the system. Windows starts normally after the restoration.

  Don't forget, this happens from a full stop. To remedy this, I just never completely shut down my computer. I left running and back just at the beginning of the day. The computer may start restart, it just may not start with a full stop.

  Given the start of repair takes, literally, around 4 or 5 hours of full stops complete, accidental or power outages are a nightmare, I am obliged to wait 5 hours to get access to the computer. Fortunately, I have my laptop.

  If someone has encountered this? I saw people talking about the loop of startup repair, but that's not the point, I have. I have yet to see any discussion of my specific problem.

  Thanks in advance!

  Hello

  4-5 hours to do a startup repair is too long.

  Often you get better results if you a using a DVD of Microsoft Vista startup repair.

  Jose how to do a startup repair, etc. using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• How to display a thumbnail view of pictures? My vista does not list the thumbnails in the dropdown display menu.

  How to display a thumbnail view of pictures?  When I open the folder what I see is a generic panoramic picture rather than individual images.  My vista does not list the thumbnails in the dropdown display menu.  Before updating the Windows I used to be able to see thumbnails of my photos views when I opened the files with images inside.

  Here's a possibility... go to... Start ORB / Control Panel.
  Folder options / tab / files and folders / uncheck
  "Always show icons, never thumbnails" / apply / OK.

• Windows Vista does not recognize my Ipod Touch

  Windows Vista does not recognize my Ipod at all. He even appears in Device Manager. I know that is not my USB cable because it is new, and it isn't my Ipod because it works on Mac computers. I just need someone with expertise to help me get my computer to recognize my Ipod so I can go back to enjoy my music.

  Hello

  MTP mode for WMP11 sync - mode MSC to treat the MP3 as a reader. So you have set up in the MTP.

  -----------------------------------------
  If necessary:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Make sure that Windows is updated appropriately that there have been several USB updates.

  1 check that the driver letters for them, for a player, if the drive of the default drive letter is changed, what is happening.
  Mine was h: I added a device that took H: and the player stopped. So I put it back to H: and the other
  device to J: and everything worked again. If necessary start - type in the area of research-> disk management find top
  -Right-click on it - RUN AS ADMIN

  Don't forget to remember the MP3 must be set to the PSG to sync with WMP, and meteorological service of Canada to copy and delete files
  and update the firmware.

  If no joy follow these steps:

  You may need a powered hub. (all the USB ports on your computer are not powered, often only 2)

  Try these:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Here, your devices are the MP3 player.

  Now look everywhere EXCEPT the USB controllers for your devices (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

  Here is the similar procedure under XP, Vista is the same, except that we need clear specific devices, as appropriate.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• My screensaver on Vista does not work and I have a wireless mouse.

  Original title: HID Non-User Input data filter (KB 911895)

  My screensaver on Vista does not work and I have a wireless mouse.

  I can't find the update Microsoft - other hardware - lay HID Input Data Filter (KB 911895) I checked update history and he's not here.  How can I download it?

  Hello

  · What is the number and the model of the wireless mouse, you work?

  See the link below and try the following steps: the screen saver does not start after the installation of a wireless pointing device: http://support.microsoft.com/kb/913405

• Windows Vista does not start, turns to a blue screen error 2203

  original title: Windows Vista does not start, turns to a blue screen HELP PLEASE!

  Help, please! So I'm panicking here, just yesterday, I tried to download the update to Itunes, and it did not work. So I followed the instructions and uninstalled the program first, but one of the applications does not uninstall correctly. I thought I could just substitute with the update and replace. The error code was 2203.

  So I thought it was right after the download all itunes thing, and when I came back to check on the download, the screen turned to this black thing with words on this subject. I decided to force closing down by pressing the power button. Now everytime I turn on the computer, it leads to the screen saying 'windows is loading files', then this blue screen with a very large arrow (the mouse). I tried pressing the F11 key and stuff, but I have no idea what to do. PLEASE REPLY AS SOON AS POSSIBLE, REALLY NEED A COMPUTER!

  "I tried to do the second option, because the first really helped."

  Something works, or it doesn't work regarding: "really helped."

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  I'm sorry, but I don't understand where the procedure of ISO part 2 stops.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You may be interested in this:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  See you soon.

  Mick Murphy - Microsoft partner

• Two disks hard two Vista does not start

  Two disks hard two Vista does not start

  For large computing needs, I combined two software Vista, two memoirs, two hard drives, the work display card and sound card.  A hard disk as Primary Master IDE has perfectly my current programs, Office 2007, data and functions.  The SATA drive has the space of files I need and a disabled Vista.  The computer starts with the SATA HD Vista does not work and stops at a missing file.  I do F12 and select the hard disk IDE startup.  I tried several solutions, for example: Startup Repair, recovery disk, installation DVD of Vista, repair, BIOS F2 re boot choice and sequence, does not list the IDE drive as a choice, tried to remove the disabled Vista, all the solutions in the forum, Ms.  Not solved.

  For months in the auto-update feature, the two .NET Framework 1.1 and 3.5 will not install.

  Please tell me solutions to correct these errors for .NET and start-up.

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/314060

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Burn a CD or DVD

  If your computer is equipped with a CD or DVD burner, you can copy files to a recordable disc. This process is called burning a disc. By default, Windows Burns discs in the active file system format, but you can also choose to burn discs in ISO image format.

  See you soon.

  Mick Murphy - Microsoft partner