Windows writes to the office and other places

Similar Questions

• Can I restore my copies of Office and other software from a Windows XP Backup?

  I did a full backup of my system Windows XP, including MS Office and other software. I upgraded the system to Windows Vista. Can I restore the backup XP MS Office and other software on Vista?  I installed backup-restore of Windows NT on Vista and open the backup file, selected the folders I wanted to restore and begun to restore. The documents have been restored correctly but SW such as the Office was not. SW files have been restored, but they are not "installed" i.e. do not work, I think it's obvious, but I don't know how to install.

  Thank you.

  original title: restore backup XP on Vista

  In this case, you must reinstall the programs, as has already advised it.

  "If you did a clean install, it's different.

  Programs need to be reinstalled from the original media (CD, DVD, etc.). »

  You can not copy programs installed from another hard drive or a backup.

  The only way that works is if it was a picture of complete backup of XP from the operating system installed and you need to reinstall the full XP Image for the program to work again in this OS XP...

  See you soon.

• OFFICE 2003 UPDATES NOT INSTALLi WILL have carried out a search for the KB numbers is not found has tried to find where the updates have been downloaded, not at the office and not in the section windows software, then

  4 updates for office 2003 will not install update for the junk e-mail in Microsoft Office Outlook 2003 (KB974771) filter
  Update of security for Microsoft Office 2003 (KB972580)
  Update of security for Microsoft Office 2003 (KB974554)
  Update of security for Microsoft Office Outlook 2003 (KB973705) I searched the KB numbers, not found tried to find where the updates have been downloaded, not at the office and not in the software section windows, so I am at a loss, the small yellow shield keeps saying updates are ready for download
  I am at a loss of what everything else is fine, that I have set for automatic notification of updates, then let me chose to download.
  for any help or suggestion would be greatly appreciated.
  Thank you very much * address email is removed from the privacy *.

  Download the 4 four updates and install them manually.

  IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB974771&displaylang=en&stype=s_basic

  Just look for the other 3 three, download to a place you can find and install manually the same.

  Taursie TaurArian [MVP] 2005-2010 - Update Services

• asphalt 8, I installed on my windows 8 core i3 laptop but the game won't start, he writes that the loading and it never finishes loading

  asphalt 8, I installed on my windows 8 core i3 laptop but the game won't start, he writes that the loading and it never finishes loading

  Hi Samuel,.

  To solve the problem with the application you have installed, you can run the troubleshooter for Windows app.

  Let us know if you need more.

• an error "file does not have a program associated with it for performing this action" when you click office and recent places.

  Original title:

  Win7 victory explrer click dsktop & mployment plces & get eror msg file is not a CDSA wth to prfrmin ths field prgrm. pls instl one prgrm so is alrdy instld Credit Union assc ltvds cntrl pnl prgrms

  I don't know how to fix. Help, please.    Win7 windows Explorer click

  Office & recent locations & grterror msg:
  This file does not have a program associated with it for performing this action. Please install a program or, if it is already installed. create an asssociationin the default programs control panel.
   
  Information given in the new thread:
  Error Msg When you try open office spaces & recent since the win Explorer

  when im in windows Explorer and click on the desktop or the recent places the link I get a msg of error and they will not open, but all others open. I posted pictures of error msg to skydrive yesterday.

  Hello

  Welcome to the Microsoft Community Forums.

  I see you've found an error "file does not have a program associated with it for performing this action" when you click office and recent places.

  1. Have you made changes on the computer before this problem?
  2. What is the full error message?

  I suggest you to report to us the screenshot of the Advanced window so that we can understand what exactly the situation.
  
  See:
  Use SkyDrive download collected files and post screen shot/image
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  The average while you can try the following steps and check if the error reappears.

  Method 1:

  Step 1:

  Start the computer in safe mode and check the number.

  Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.

  Follow this link provided below to start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  Put the computer to boot and check if the problem persists.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 of the KB article provided above.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  It will be useful.

  Back with the details so that we can help you further. We also indicate the result of the suggested steps.

• I use a laptop Windows 7 in the office wireless remote for my desktop running Vista. The connection disconnects regularly "try to reconnect 1 20.

  Hello

  I use a laptop Windows 7 in the office wireless remote for my desktop running Vista. The regular connection disconnects after a few minutes, then displays the window pop-up "try to reconnect 1 20. It always with success reconnects itself during this first attempt. During the time when the connection is lost, the internet connection is fine, in other words, I could use my cell phone to browse the internet.
  Any ideas what could be causing this?
  Thank you.
  original title: remote to vista win7 desktop keeps losing connection and reconnection se

  Hello

  Follow the steps in troubleshooting section and check if that helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  See also:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

   

  The problems of desktop remotely

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

• If I update Vista 32 bit to Win 7 64 bit, how can I carry / recover the Agency and other serialized software on?

  Well my daughter has an Acer (POS) and it came with Vista 32 bit.

  I'd like to get this dog-slow Vista 32 bit machine upgrade to Win 7 64 bit.

  The problem: I KNOW that it's A CLEAN INSTALL...  How to import all of its programs, products and existing serialized, such as Office 2007, etc.

  Is there a method to retrieve all the entries in registry etc?  Call the MS Helpline for the new series/key numbers?

  In other words is that this will be one of those, "I want TO NEVER, I STARTED THIS PROCESS' events?

  Thanks in advance...

  Hello dave-tek-nerd

  You can try to use Windows Easy Transfer utility. It backs up your data, and your settings. However, for the applications you have to reinstall. Assuming that the Acer system came pre-installed with Microsoft Office and other specialized software, you will need to ask Acer media. To use the Windows easy transfer tool click on the link below. It includes a video tutorial as well as the download link to the tool. Thank you.
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer?SignedIn=1

• Again - the EULA allows to keep Windows XP after the installation and activation of a retail upgrade to Windows 7

  The EULA allows to keep Windows XP after installation and activation of a retail upgrade to Windows 7?
  I understand that the EULA (EULA) prohibits the USE of the operating system upgraded - must also be removed from the system?

  I intend to upgrade a pre-installed Windows Media Center 2006 on a Gateway computer to a level of detail to Windows 7 Pro 64 - bit.  I am adding a new hard drive, as this case nears end of life... and plan to install the operating system upgraded to the new HD - because I have XP 32 bit to Win7-64 bit... and a "custom" installation is necessary, anyway.

  This will result in an operating system XP on the old hard drive and the new OS Win7 Pro 64 - bit on the new drive.  There have been suggestions that the answer to this question is simply to remove the "old" operating system, after activating the 'new' Windows 7.  However - I see that any installation (or REINSTALLATION) of the operating system upgraded to Win 7 requires the previous XP to be "present on the computer.

  QUESTION: as long as I don't 'USE' the BONE replaced/implemented to date, I am in compliance with the EULA?  Alternatively, do I install "over" this Windows Media Player OS - on the old, due to lack of hard drive?

  The Media Center EULA States: «...» "15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After you upgrade, you can no longer use the software upgrade of. ... ', but is silent (as far as I can find by reading the EULA on the question of if software upgrade HAVE to be 'destroyed'.)

  (See: http://download.microsoft.com/Documents/UseTerms/Windows%207_Professional_English_7bb89e9f-20ea-4555-892f-394539ec1090.pdf "")

  Thanks for your review (a reference to the appropriate Microsoft documentation would be nice too)
  John

  You said above, «...» "You will be able to upgrade to Windows XP, it is a qualification license... »

  And I assume you are talking about my software Windows XP Media Center Edition (currently installed), as being a "qualification licence".

  That is right.

  Are we in agreement that a copy preinstalled OEM of Windows XP Media Center Edition IS extendable with a 'detail' update the license for Windows 7?

  His qualification, but you can't make a real room upgrade, you can do a custom installation. See the previous post on how to migrate from Windows XP to Windows 7. An upgrade maintains the personal files, settings and installed applications.

  I understand the ban on using the OEM OS software OR the upgrade replacement software on one computer other than the one on which it was originally installed by the OEM.

  I also understand that I cannot use the "improved" XP Media Center software, once the upgrade of Windows 7 has occurred.

  The rest to determine if it NEEDS to be deleted or replaced... you have no guidance on this issue?

  Well, when you perform a custom installation, in essence, it is deleted or replaced. Then, it is part of the upgrade license. It's like it becomes a mind is more tangible, but always there as a base to which the upgrade license may exist on your system.
  ------------------------------------------------------------------------------------------------
  On the original thread, Stuart W J replied 10 September 2012-
  "....

  "New - the EULA allows you keep Windows XP after the installation and activation of a retail upgrade to Windows 7?

  "..... No it does not preserve / using XP after the upgrade... »
  -----------------------------------------------------------------------------------------------
  Although I can't find the ban against the "continued" it any where in the EULA.

  Thanks again,
  John

• Cannot connect to windows to receive the updates and run windows Defender

  I am more able to receive windows updates or run my windows on my PC Defender. I had some malware problems that I removed, but

  After you have cleaned the malware I notice my windows Defender, windows update didn't work more and my printer software has been removed.

  If anyone can give some suggestions I would greatly appreciate the help and advice.

  Thank you

  Hi Byron,

  Thanks for posting your query in Microsoft Community.

  I do not understand that you are unable to connect to Windows to receive the updates and run Windows Defender and I'll be happy to answer your query.

  This could be due to any dispute of third party software or system files missing or corrupt. We will try the following methods and check.

  Method 1: Put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: Run the System File Checker tool

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Press the Windows key + X , and then click prompt (Admin)

  Type the following command and press enter

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  From now on, try the methods above and let us know the result.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

  I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?

  I suggest to run the patch from the following link and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• Whenever I click on recorded TV I get this message "Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

  Title: original problems to access TV on Windows Media Center recordings

  My media center has suddenly stopped working for recorded tv.  Whenever I click on recorded TV, I get this message:

  "Windows Media Center has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  All other features of the media center work correctly.

  Any help would be appreciated.

  Hi vater19,

  Remember to make changes?

  Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference

  Open the Setup TV tuner Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter

  Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:  You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
  http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SilkRoad online Launcher has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  After I installed and opened a Silkroad Online on my Windows 7 64 bit, an error pops up: Silkroad Online Launcher has stopped working, and a close button the program. Any ideas on this subject? I tried to disable the firewall and antivirus software and restart the game, but it didn't work... I don't know what to do. The whole eror massage: Silkroad online Launcher has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available

  It is a file you need to edit in Notepad in the game directory. I would contact the manufacturer of the game as to what exact file. I have not personally done it, but I've seen this fix on other forums. MCP. MCDST. LVL 80

• I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates.

  Thank you for taking the time to read this. I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates. I thought I would do a clean install of Windows XP, install my Microsoft Works again and nothing else. I would like to effectively transforming my computer into a word processor. He continues more and more slow. I get blue screen errors, once again. I received excellent Microsoft Support when it happened before, but since my computer is around 13 years, I think it is not worth the headache to try to remedy. I ran the Windows 7 Upgrade Advisor, and my computer would not be able to upgrade. Please, can someone tell me how to make it only a word processor without updates or internet connection? (I already have a new computer with Microsoft Windows 7 Home Premium, it's the computer that I use. The old computer is just sitting there and once a week or so I updates.) I appreciate your time, thank you!

  original title: old computer unstable

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  http://www.WindowsXPHome.WindowsReinstall.com/sp2installxpcdoldhdd/indexfullpage.htm

  http://aumha.NET/viewtopic.php?f=62&t=44636

  Clean install XP sites
  You can choose which site to reinstall XP.

  Once it is installed, then you do not have to connect what anyone, however, some updates may be required to perform the work, test this by installing work and see if you get an error msg. Except that you should be fine.

• I lost the office and all programs-system restore will not work. Now, all I have is a blue screen.

  Original title: I lost the office and all programs-system restore won't work

  I don't know what happened, now all I have is a blue screen, if I click on programs it says 'empty' can not get on anything

  Hello
   
  1. what exactly happens when you try to perform the system restore? If you receive an error message then, send the same return.
  2 have you made changes on the computer before this problem?
   
  Please answer these questions and to provide more specific information on the issue. This could help us help you better.
  The following articles could be useful.
  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen
  http://support.Microsoft.com/kb/318027
  When you point to "Programs" on a Windows XP-based computer, the program list does not appear, or the list of programs is empty
  http://support.Microsoft.com/kb/941248

• Windows Update does not start and other problems...

  When I connect to windows update, the page becomes white and everything continues to load.  I can't start in safe mode to run all the patches.  I also have an annoying problem of svchost that takes more than 90% of my memory.  I ran every virus known to man program... MalwareBytes, Kaspersky, ESET, to name a few and they all say that my computer is clean.  I am running windows xp pro service pack 3.

  Hi Bopatop,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click on Start , then run.

  (b) type msconfig , and then click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services , and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Also, check out the articles below and check if that helps.

  You receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box

  http://support.Microsoft.com/kb/927385

  A description of Svchost.exe in Windows XP Professional

  http://support.Microsoft.com/kb/314056