Updates to window do not work!

Similar Questions

• I recently did a full restore on my windows xp laptop and now the updates of windows do not work

  I'm totally frustrated.  I thought I was doing pretty good when I totally restore my computer as long as the plant.  but, to my surprise, I can't seem to get the updates of windows to work... Help

  Hi RoxanneQ, is required to use Windows to SP3 level out.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  Ref: http://taurarian.mvps.org/WU_XP/0x80240036_0x8024400A.html

• Security Center and updates of Windows do not work on Vista laptop

  I have a laptop Dell Inspiron with Vista 1405E.    The Security Center and Windows updates do not work.

  I ran Norton Utilities to clean the registry and I deleted Norton Antivirus (completely, following the instructions from Symantec on the phone), but nothing has changed.  Any suggestions on what could be the problem?

  Thank you

  Should I remove S * PERAantiSpyware from my computer?

  If it is not necessarily - free SAS, but if all were fine with your computer (and it's not!), you should not have installed SAS because MSE includes a component of anti-malware.

  Should I install the [definitions optional updates offered by Windows Update MSE]?

  You pouvez install them but this is not necessary - assuming that MSE is installed & working properly... but I suspect that this is NOT the case!  See this FAQ: http://answers.microsoft.com/thread/74e507b8-f6da-4eca-8ce7-d1aca7d3f1ba

  [Microsoft] Security Essentials is related to the Security Center?

  Yes. Security Center monitors the status of the firewall, automatic updates and Protection against malware (anti-virus & anti-malware; applications i.e. Microsoft Security Essentials).

  Translation: Since the Security Center still cannot be permanently turned on, there is a very good chance that MSE and Windows Firewall will not work correctly - despite the fact that we have now managed to get the computer fully patched to Windows Update and despite the multi-step fix, I had to make.

  In your case, there are several possible causes for this behavior:

  1. your McAfee subscription and/or your previous subscription of Norton AntiVirus may have expired before that you did something;

  2. do not run the remove McAfee & Norton tools at the right time; or...

  3. misguided use of registry cleaners.

  So, what can you do about it?...

  OPTION A: MSE support could be able to help you. Residents of the United States (only!) should be able to open a support incident free of charge by e-mail via this page-online https://support.microsoftsecurityessentials.com/default.aspx?productkey=morrolaunch&mkt=en-us&st=1&wfxredirect=1

  Note: After selecting your option, language (e.g., English-US) and clicking the button CONTINUE, click on the EMAIL button, not the FORUM button!

  OPTION B (recommended): See the poster in this thread and follow the instructions of (my) WHOLE (to the letter and in order! ) to restore your computer to a State safe & functional: http://answers.microsoft.com/thread/c44429fb-3f7c-4646-8529-5a97bb3cd0eb

  If these procedures are outside your technique "comfort zone" - and there is no shame in admitting this isn't your cup of tea - take the local computer, reputable and independent (i.e., not a 'BigBoxStore' or Geek Squad!) computer repair shop & let them do the work.

  IMHO your computer must NOT be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you. Good luck!

• Updates to Windows does not work

  Windows Update does not work. I used the troubleshooting of windows update. So-called three problems have been resolved, but has not been set. one not fixed is, windows update error code 0 x 80070057 (2016-o4-19-T-07_25_28A. How can I fix it?

  Home premium HP 635 laptop Windows 7

  Switch your windows update setting to never check the updates temporarily

  Restart the machine
  Then you download this from your download folder run from there.
  https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

  Download the x 86 for 32-bit or x 64 for 64-bit

  Install it and restart when prompted too after he did a search of stand-alone for updates that should not
  take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check
  updates before running from the downloads folder.

  Once it installs and restarts
  You can reset your updates affecting everything you had before default =...
  Then check the updates manually.

  I think that the solution came from Softpedia and Joel_CS posted on this thread,
  http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

  You need to scroll down to the poster of Joel SC is the last answer on this thread.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

• The update of window does not work

  The progress of the 'check for update' will not be completed after an hour and an hour.

  I tried the solutions offered on the internet, such as delete the C:\Windows\SoftwareDistribution folder and its contents and execution of WindowsUpdateDiagnostic, but still the problem is not yet solved.

  Install the latest version of the Windows update client.

  http://support.Microsoft.com/kb/3161608

  The value "never search updates" updated machines and Windows before restarting. Manual installation will be prevented by a continuous research.

  Best regards, VZ

• Wat (windows activation technologies)... I have windows 7 rtm... when I install this update, my windows are not authentic... why?

  Wat (windows activation technologies)... I have windows 7 rtm... when I install this update, my windows are not authentic... why?

  Here is a possible explanation:

  Windows 7 displays "Windows is not genuine" with the code 0x80070005 error
  http://support.Microsoft.com/kb/2008385 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 'Check the updates of Windows', has not highlighted, lack of "Updates of history"

  My Windows Update is unable to work. 'Check the updates of Windows', has not highlighted, lack of "Updates of history". Failed to check the updates. There is no virus, spyware, unwanted software detected. A similar experience?

  Thank you for your response. The Scaner Windows has the result of no viruses, etc..

  I have solved this problem in line with someone, i.e. first stop the service update of Windows, and then delete all the files in "C: Windows/.../Softwaredictribtion/datestore", finally restart the update of Windows. Now it's working.

• Video preview of AE cs6 window does not work.

  If the after effects cs6 preview window does not work. It shows just the black screen. I need quick help.

  The example PIC: http://gyazo.com/d1219b0b95d7b2bd59e0980506db7c95

  Why am I not surprised? Yes, the effin ' mess they made with the OpenGL drawing. To update your graphics driver and configure it properly. If it is supported, it should work, otherwise the program will / should turn off automatically. Trash the prefs after the pilot started day so AE scans again.

  Mylenium

• update of Windows sometimes stop working

  update of Windows sometimes stop working

  Yan,

  Please post with the information requested here:what to post in the Windows Update forum
  Start with this troubleshooting step and post returns with the requested info and arises from the troubleshooting.

  Reset the Windows Update components

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have windows xp I deleted rundll32.exe now my windows will not work please help.

  I have windows xp. I some how deleted rundll32.exe now my windows will not work or open. system restore not working anymore.

  http://www.computing.NET/answers/Windows-XP/deleted-rundll32exe/168958.html

• Windows aero not working not

  well my computer was fixed is not if a long time and when I got back most of the things worked very well, but the windows aero and some other stuff windows did not work how can I get the fi back aero theme is not in the choices when I go to customization, I have a dell inspiron 1545

  well my computer was fixed is not if a long time and when I got back most of the things worked very well, but the windows aero and some other stuff windows did not work how can I get the fi back aero theme is not in the choices when I go to customization, I have a dell inspiron 1545

  2 suggestions:

  1 here is a link to Microsoft FixIt:
  http://support.Microsoft.com/GP/aero_effects_not_working?EntryPoint=WHHT

  2. If the method above does not work, try this...
  Start button > Search box, type services.msc >enter key > scroll to find
  Desktop Windows Manager Session Manager. Under status, it must bestarted. Under Type of Stratup, it should be Automatic.
  Scroll to THEMES. Under status, it must be started. Under Startup Type, it should beAutomatic.
  If they are not, RIGHT click on them, make changes on the next window.
  Click OK when finished.

  t-4-2

• Defender of the window does not work.

  I recently had the Vista antispyware 2012 the virus.  I was able to get rid of it, but now the Defender window does not work.  When I click on the icon I get a pop up msg: "failed to initialize: 0 x 80070006.» The handle is invalid. "How to operate?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/why-does-my-Windows-Defender-not-work/a9c81020-cf8d-4149-8B4B-bc059ecf500a

  But you should also read this:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/Windows-Defender-and-Microsoft-Security-Essentials/5309cb8d-02e1-40E8-974f-0dcedb9ab9fd

  Norton, AVG and McAfee, MSE will disable Windows Defender for dreaming of potential conflicts with their respective programs.

  I hope this helps...

• Photos may not be printed as a service that needs Windows does not work

  One morning last week when we turned on the conputer lots of things had changed.  I finally got my page online straightened out, but I could not print photos that were stored in the computer.  When I tried I got the message "Photos cannot be printed because no printer is installed or a service that needs Windows does not work.  And I wasn't able to print with my camera card inserted in the printer. I was able to print the text so that the printer is of course.  Can you help me?  I must add thaat I was able to print photos using the map to a pharmacy machine then the card is OK.

  Wendell Bard

  Hello

  1. What is the brand and model of the printer?
  2. you remember to make changes on the computer before the show?

  Method 1:
  You can perform troubleshooting of the printer and check:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  
  Method 2:
  If the problem persists, you can perform a restore of the system to the point when it was working fine and check:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  You can also check out the link:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  For more information, please see the link below:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• I can't install the new application on my iphone 5s revel.  I tried to install the update, and that did not work.  I deleted my app and rebooted my phone and tried a clean install and that no longer works... Help!

  I can't install the new application on my iphone 5s revel.  I tried to install the update, and that did not work.  I deleted my app and rebooted my phone and tried a clean install and that no longer works... Help!

  Please see the post below updates on the issue of the revel facilities:

  Problem installing Adobe Revel 2.3.2

• File server for Windows does not work after security update

  I just upgraded the security update that was released last week and all of a sudden the computers windows cannot access the server. I'm under 10.11.6 and everything was great until we started windows computers today. They can ping and access the internet, but they cannot access SMB on the server.

  Macs have no connection problems in the SMB and AFP.

  Any ideas, what has changed? Users of server are all still there and it seems like it should work. I can access the web page of servers too.

  Make sure you are including the domain in the user name when signing in. for example USER: groupe_travail

  Also, check that your windows machine has the correct set of LM compatibility level. For El Cap servers must be set to 3.

  Follow the instructions below to change the Windows security settings to allow Windows SMB connections.

  1. Click on the Start button and in the bottom search bar, type regedit . Select search results regedit and the registry opens.
  2. Using the folders on the left side of the screen, navigate through the tree to the following location: \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
  3. In the right window, find the following DWORD value: LmCompatibilityLevel . If it exists, double-click it and set the value to 3 (in decimal).  If it does not exist, right-click in an empty space in the right part of the window and create a new DWORD value called LmCompatibilityLevel and set its value to 3 (in decimal).
  4. Restart the computer.
  5. Re-try to connect to the server via the workstation.

  NOTE: The versions Home of windows may not the ability to set the LM, and unfortunately I have not found a way around that.