Updates Windows 7 October 2016

Similar Questions

• Impossible to update windows, dissapered BITS

  I have a Toshiba Satellite A-135. MY SOFTWARE IS WINDOWS VISTA HOME PREMEIUM. I WAS NOT ABLE TO UPDATE WINDOWS SINCE OCTOBER 2008. I GET AN ERROR 80246008 CODE. WHENEVER I SEE THIS ERROR CODE ME SAYS TO GO TO SERVICES AND SELECT BITS. WHEN I GO TO SERVICES, BIT WAS NOT FOUND. HELP HELP HELP!

  Hi Manfred13,

  Thanks for posting answers.microsoft.com

  I wanted to just check with you to see if this problem has been resolved.

  Here are some steps described in the following article if you need help.  http://support.Microsoft.com/kb/910337

  Verify that BITS is correctly configured verify that BITS is correctly configured. Then, try to start BITS. When you try to start BITS, you may receive one of several error messages. These error messages are listed in the section "troubleshooting steps. If you receive an error message when you try to start BITS, follow the steps in the section that corresponds to the error message that you receive.

  To verify that BITS is correctly configured and then start BITS, follow these steps:

  1. Click Start, click run, type services.msc and click OK.
  2. Double-click on Background Intelligent Transfer Service.
  3. In the Startup type box, click Manual, and then click apply.
  4. Click the connection tab and verify that the service is enabled in every hardware profile is listed. If the service is disabled in one or more hardware profiles, click the hardware profile, click Activateand then click apply.
  5. Click the general tab, and then click Start.

  If BITS starts successfully, visit the Windows Update Web site or the Microsoft Update Web site for updates. If you get the updates successfully, follow steps 1-3 again. However, in step 3, click Automatic rather than Manual.

  Please follow these steps and if it does not solve the iss, try more of that article listed above to see if there is no will.

  If no will, please publish it on us in this community forum for more suggestions.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• updated itunes,-, outlook, for, icloud, would not work, windows, outlook 10, 2016

  updated itunes,-, outlook, for, icloud, would not work, windows, outlook 10, 2016

  Error: 0 x 80040604: upward / POST: conflicts

  [Error: 0 x 80040604: Up/HdlPOSTr[p06-caldav.icloud.com/412/0#16/83]

  See if it might help - Error: 0 x 80040604: Up/POST: conflict

• When I first installed the new 5.1 icloud, OUTLOOK 2016 worked well. Updated windows 10 and know icloud will not work. ICloud show that it works.

  When I first installed the new 5.1 icloud, OUTLOOK 2016 worked well. Updated windows 10 and know icloud will not work. ICloud show that it works. Have reinstalled icloud a lot of time and know that the add-in does not show up in OUTLOOK.  Help

  I was pulling my hair re the incompatibility of iCloud and Outlook of Office 365 2016.  I finally got things to work on three of my computers - which are on the latest version of Windows 10.

  The steps that worked for me:

  (1) uninstall the plugin iCloud (what version you have); the uninstall may fail but if so don't worry as step 3 below overlays some iCloud plugin version you have installed

  (2) open the Control Panel, uninstall, change/repair Office 365; Select fast repair

  (3) reinstall iCloud plugin (version 5.1), then restart the system by following the instructions

  (4) after the reboot, plug in iCloud application Apple ID and password; Make sure that you enter your apple with the suffix icloud.com ID (e.g., [email protected])

  (5) check the iCloud options to your will (e.g., photo synch, synchronization of bookmarks, sync mail/calendar, etc.)

  (6) check apply it, leave the work plugin iCloud for a minute, when he finishes, check the closing

  (7) open Outlook 2016 and check your calendar or contacts or anything that you indicated in step 5, that you want to synchronize with iCloud.com

  I hope it works for you!

• 10 Windows update failure, get update error code 0x800057(2016-01-06-T-07-57-00p)

  Computer Dell laptop os Win 7 Pro.  Tried to install Win 10, final msg has been install failure.

  Error Msg.  computer needs to be repaired.

  After talking to win the Office of response I have

  has been advised to run a windows update issues/fr. link

  This has produced two points.  updated error code 0x800057(2016-01-06-T-07-57-00p)

  MSG saying registration service missing or damaged.

  This computer has been renovated by a refurb under license. Co. Ltd.

  Device provided with original COS and original identification code and a second COS, a second identification code.

  any suggestions on the t?

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• The iCloud for Windows and Outlook 2016 incompatibility is fixed yet?

  When I try to update iCloud for Windows on my system Windows 10 and Office 365, I get error Code 2434.  Technical support at Apple told me earlier that this was due to an incompatibility 'temporary' between iCloud for Windows and Outlook 2016.  Anyone know if this problem has been corrected?  Also, is it possible that Apple can disseminate a notice to users when it was corrected?

  It was fixed the or around December 7. See quote below download iCloud for Windows - Apple Support

  iCloud 5.1 for Windows supports Outlook 2016. ICloud for Windows Update now access your iCloud Mail, Contacts and calendars in Outlook 2016.

• can not update windows, 8024400 has error code

  I can't update windows, get the error message 8024400 a. have tried to repair, but it will not work until I update windows.

  What browser (exact version) you are using. ?

  Harold Horne MVP responded on 24 September 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  UTC/GMT is 01:04 Saturday, October 6, 2012

• Update Windows Vista crashes with 'check updates'

  Last month, Windows Vista updates began to hang on to the 'check updates'.

  I have: 1. tried all the fixes I could find.
  2 reloaded Vista with SP1 from a recovery partition.
  3 update worked until SP2; SP2 downloaded and installed OK.

  4. then, the update said I need latest update agent (7.6.7600.256). Downloaded and installed OK. At this point, the Windows update fails.
  5. If I uninstall SP2, but let the agent update, it works. When I reinstall SP2, it fails.

  6. I have installed a completely different image of Vista - this one was integrated in SP2. This version fails in the same way.

  7. I ran SFC, CHKDSK, System diags, updated all my drivers updated BIOS and replaced the memory. As far as I can tell this is the only thing that does not work on my PC.

  Anyone has any ideas. ? -Thanks!

  Hi Ichabod22:

  Thanks for your comments, and happy this worked.  I did have the chance to try this workaround yet - my phase "check for updates..." ran for 4 hours during my may 2016 updated Patch Tuesday before we found 16 available updates - but quite a few users of Win 7 SP1 and SP2 of Vista are now reporting that before installing these updates Windows kernel mode driver (Win32k.sys) each month (for example the KB3145739 in April 2016; KB3153199 in may 2016) reduced their updates for Patch Tuesday to hours to minutes.

  I doubt that this is a permanent solution so be sure to check the page Web of Dalai Search for Windows Updates takes forever?-a possible solution next month to see if a new version of Win32k.sys is available for download from the Microsoft Download Center before your race updates your June 2016 Patch Tuesday.

  Woody Leonhard has published a series of articles on of temporary workaround in his Woody on Windows blog, including Windows 7 update scans still holding? KB 3153199 can solve the problem, so congratulations to Woody, Dalai and others to share this potential solution.

  ------------
  32 bit Vista Home Premium SP2 * Firefox v46.0.1 * IE9 * NIS v21.7.0.11
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• Error updating Windows VISTA OX8024402C

  What is the solution for Windows Update error OX8024402C(2016-09-10-T-08_58_50P)?

  How can I reinstall components update Windows with a Microsoft Tool that is always available for Windows VISTA home edition?  Microsoft still supports VISTA?  It is a year now and I can't get updates; Research of update crashes.  I tried several recommendations of correction through the Microsoft Community with a negative result.  I tried a Microsoft Fixit Tool that reports 2 errors aren't fixed which includes error OX8024402C(2016-09-10-T-08_58_50P). Microsoft Servers don't know the Windows VISTA updates for support Windows 10?  How can I get through Microsoft for direct assistance on this serious mistake that is extremely difficult to define? And Microsoft does this help?

  Install all the updates that are listed in the table above this page manually:

  http://Wu.krelay.de/en/

  The value of the automatic updates to 'never check updates' and restart Windows before installing.

  Best regards, VZ

• Update Windows always fail code error "WindowsUpdate_8024402F" appear".

  Update Windows always fail code error "WindowsUpdate_8024402F" appear". Please help me...

  8024402f = you may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941>

  UTC/GMT is 17:35 Monday, October 3, 2011

• Updates Windows computer overheating

  I have a hp 2560p elitbook and the fan goes wrong then it overheats it tries every time is updated and I can't seem to stop the update. Whenever I stopped him or the battery it dies updated to market. It was updated for 3 days now and I don't know what can anyone help please

  Your central problem is obviously the heat.  If you use your laptop on a soft surface, it's your problem, or at least a major contributor.  If you're not, you can try to blow off the dust, but more often that otherwise, it would mean replacing the fan.  Usually, that happens on an old laptop and can not be cheap.

  As far as Windows Update is concerned, change her FOREVER, you should do anyway to take control of your system up-to-date.  After you change the setting, restart.  After the reboot, type services in the text box that appears when you click the start planet.  Click Services.  In this window, navigate to Windows Update, right-click on it and choose stop.

  For proper instructions on how to make Windows Update August 2016, click here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c

• Updated Windows 7 not work & Service record is missing or damaged

  Windows 7 Home Premium 64 bit - IE 11

  AV of Norton 360, v 22.7.0.76

  15 July: Windows 7 64-bit KB3161608: FAILURE

  15 July: Windows 7 64-bit KB3161608: FAILURE

  July 16: Windows 7 64-bit KB3161608: FAILURE

  16 July: MS Office 2010 32-bit KB2881030: FAILURE

  16 July: run Windows Update Troubleshooter:

  Problems encountered:

  Registration for the service is missing or damaged: DO NOT FIXED

  Windows update error 0 x 8007005(2016-07-16-T-11_22_48A): DO NOT FIXED

  Problems installing the recent updates: FIXED

  Problems installing the recent updates: FIXED

  Problems installing the recent updates: FIXED

  Especially do not show in history as installed.

  Several updates installed successfully on 18 June.  "Since running convenience store States ' control last updated: never" and updates have been installed: never.

  However, the history of the update is still present.  (From memory I think the last control was July 12.

  I think that there is a "silverlight" update which probably do not instal.

  Of Norton report that shows ' 14 July installed Adobe Flash Player 22 Active load 32-bit X' - do not appear in the history of the update?

  'Services' - status shows several 'start' but nothing running at all.

  Not sure what is relevant.  I am a silver surfer & sadly not computer illiterate.  A "RESTORE POINT" to June 18 would have a good effect?

  Thanks for any help

  I suspect that Norton might be part of the question, and if you were to perform an Internet search on something like:

  the failure of the Norton windows update

  You will see more than a million results with these words:

  

  Granted there are problems with Windows Update, because for several months but if your updates are downloading and just do not install I would suspect Norton - because in their community of support online, there are so many reports of problems and many, many debates and ideas for things to try that can work sometimes maybe (sometimes they work) , adjustments for Norton, the reinstall from scratch... it is very messy.

  In their community, they discuss especially Norton vs. Windows updates and you tell your update Adobe and Trusteer OK but those who use a different method to update that updates Windows, the problem could be JUST with Windows updates.

  Unless you are forced to use Norton for a reason, you should consider at least temporarily uninstall, then reboot your system without it and see what things look like.  You can always install it again later, no?

  You must be sure to use their custom tool to be sure that the uninstall is clean:

  https://support.Norton.com/SP/en/us/home/current/solutions/v60392881_EndUserProfile_en_us

  Some people dislike not so much of Norton (and the problems that come with it) they believe Norton its own type of computer infection and malware.  I would never recommend or install it, but your mileage may vary.

  Remember to replace Norton with something like Microsoft Security Essentials, which has a much smaller footprint, and you can download the low low price of free:

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Your system will give you better performance.

  As mentioned hit Windows Update for a long time too, but you can probably fix that part.

• Update Windows 7 broken

  Since Microsoft decided to cram Windows10 down our collective throats, my update on Win7 function no longer works.  I tried all the possible solutions for this problem, but so far nothing including works clean reinstallation of the software.

  Is the only real solution Linux?

  You might look into this it's the new way to update after a clean install.

  https://blogs.technet.Microsoft.com/windowsitpro/2016/05/17/simplifying-updates-for-Windows-7-and-8-1/

  In the opposite case

  The manual installation of updates that you have to change your update settings to never check the updates and restart the machine first.

  Make sure that KB3020369 is installed, otherwise install it manually.

  Win - 7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=46827

  Win - 7 64-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=46817

  Then manually install KB3172605

  https://support.Microsoft.com/en-us/KB/3172605

  Win-7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=53335

  Win-7 64-bit.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=53332

  After your windows update settings back to what you had before, and manually check the updates and the rest should appear shortly.

  If you need Visual AIDS to refer to this

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375

  Linux Zorin is good enough and as close to win - 7 Linux gets

  All other versions of linux are more like x - p.

• Updates Windows has stopped working for months in a row

  For the fourth month in a row updates windows has stopped working. When I use windows update troubleshooting get error 0 x 80070005(2016-07-13-T-02_20_41P).

  Tried to use windows update reset. I get the message, could not reset windows update due to the failure to stop bits service.

  Laptop HP 365

  Windows 7 Home premium

  I hope not. Unlike the last days of patch, KB3161608 is not an inescapable problem in preinstalling. It is a real solution. :)

• Updates Windows 7 July

  I'm having a problem when searching for July 2016 updates windows 7 64 bit.  Control Panel > updates > the bar does not stop looking.  I've done three times.  Even when I close out of it, 10 minutes later I went back and she is still ongoing.  After the second time, I restarted the computer.  At this point he had stopped the app for research.  I did a "check for updates" again and again once it would not stop the search.

  My setting are "download the updates - but let me install.  I had an update yesterday, 12 July 2016 but one... for MS Office, which I installed it.

  The complete list of updates of July out yet?  Even if they have not I think there is always something wrong.  The "search for update" never acted like this before.

  Thank you for any response...

  Default update clients can not handle the KB3168965. Install the latest version of the Windows Update client, included in KB3161608.

  https://support.Microsoft.com/en-us/KB/3161608

  Set never 'Find updates' automatic updates and restart before installing.

  Best regards, VZ