Updating of the computer erased my favorites, help!

Similar Questions

• Cannot download the updates on the computer

  Original title: how to get updates on windows 7, mine does not update

  mine shows all the update failed, always looking for new updates, but the computer never downloads none

  Hi bonnie563,

  What antivirus or firewall is installed on the computer?

  Follow these steps to solve the problem.

  Method 1: Solving problems run Windows Update

  Windows 7 comes with a built-in utility to update problems. Run it and see what has to say. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2: Temporarily disable the firewall or a third-party antivirus software

  If you have any third-party firewall/antivirus, disable all and just keep the built-in firewall of Windows when downloading updates. See if this allows you to perform the download.

  Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this solution to workaround but are providing this information so that you can implement this workaround at your own discretion solution. Use this workaround at your own risk.

  To disable the third-party firewall, see the documentation provided with the program or contact the program vendor.

  Method 3: Turn off Accelerator software

  Disable any software accelerator programs that may be running. Some examples of these programs are file download accelerators and Internet speed accelerators.

  Method 4: Journal see Windows Update

  By default, the Windows Update client records all transaction information in the following log file:

  %WINDIR%\WindowsUpdate.log
   
  If the methods above does not resolve the issue, view the log file for more investigations.
   
  For help on the log file, see: How to read the Windowsupdate.log file

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get an 80070663 error when installing an update on the computer.

  Original title: impossible to install KB2687499 on Windows Vista

  The microsoft Installer Update continues to detect sequences of security update Microsoft Office (KB2687499) 32 - bit Edition if necessary to install on my system and continues to fail.  So I downloaded the update manually, but when I run it, I get the message: "Please wait while the update detection is to be run." and then I get the message "an error has occurred during execution of detection."  I called the Help Center (SRX1193068976ID) and gave them the windows update 80070663 error code.  The representative sent the following links:

  < your="" answer="" tech="" thought="" you="" might="" find="" these="" links="">
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-80070663/869d5ea6-9892-4273-A43D-26ee4f42efe2

  http://support.Microsoft.com/kb/913754

  I followed all the instructions and I can not yet solve the problem.  Any help would be greatly appreciated.

  Thank you
  PAM

  Hi Pam,.

  Thanks for posting your query in the Microsoft Community.

  You have a problem with the installation of an update on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) what is the exact error message?

  (2) you are able to install other updates on the computer?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 1 and 2 require changes need to be made in the register. You must back up the registry before you proceed.

  I would have you look at the article-

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2-

  I would have you look at the article-

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Note: The Chkdsk scan will try to identify and repair bad sectors on the hard drive. All the data on these areas could be lost in the process. The computer can also enter a no start condition.

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• Camera raw Adobe fails to open Fuji RAF while lightroom succeeded. I have Adobe CC update to the latest version, can someone help?

  Camera raw Adobe fails to open Fuji RAF while lightroom succeeded. I have Adobe CC update to the latest version, can someone help?

  Hi Sandy,

  Please use the link below to update the Plugin Raw camera Version 9.3.1

  Camera Raw installation of Adobe Photoshop CC and CS6 program

  Once that is done, try opening the Raw Images

  If this does not work, please see the list of compatible camera that supports.

  Devices supported by Adobe Camera Raw

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Installation of updates and the computer shuts down

  By turning on the computer it goes to 3 of 3 updates to the installation, then stops. This happens several times and am unable to turn on the computer. I brought the laptop with Vista already installed on it, not so no disc
  I am out of resources on how to solve the problem!

  Hello Barby,

  The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe . When the Windows NT kernel detects that or the other of these processes has stopped, it shuts down the system and triggers the STOP 0xC000021A error. This error may have several causes. Among them are the following:

  • Incompatible system files have been installed.
  • A Service Pack installation has failed.
  • A backup program used to restore a hard drive does not correctly restore files that may have been in use.
  • An incompatible third-party program has been installed.

  Step 1:
  You can try the above troubleshooting steps I have provided about the "configuration updates 3/3. 0% complete".

  Step 2:
  Please follow the troubleshooting steps mentioned in the link below
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;156669

  Step 3:
  Otherwise, please try the steps below to restore your computer to the last working state.

  (1) start the system using a Windows Vista DVD.
  (2) system will ask you to «Press any key to boot with the CD or DVD...»
  3) press enter or another button to continue...
  (4) "thewindow installation" will open. Click Next.
  (5) choose the option "repair your computer" in the next window.
  (6)the system recovery options window"opens. Choose the Option 'System Restore'.
  (7) now select 'System Restore' window you invite, and then click Next.
  (8) he will ask the 'restore to choose Point".
  9) click in front of the box 'Show Restore Points more than 5 days'.
  (10) select the date on which Office worked very well. And then click Next.
  (11) 'drive to confirm to the recover window"will ask you choose Drive where the OS (Operating System) is installed." Click Next.
  (12) confirm your Restore Point window will be fast, click Finish.
  (13) A pop up you will be asked to continue the restoration of Windows. Click Yes.
  (14) the system will begin to restore the operating system for the selected restore point. Once finished with this the system will ask you restart indicating that the machine is restored successfully.
  (15) reboot the machine.

  By performing the steps mentioned above, system will be re-recorded on the date on which it was working fine.

  Note

  : S ' ensure that to disable your automatic update function after the restart, to avoid to automatically download patches.

  [If this post can help solve your problem, click "propose as answer" below or the "Vote as helpful" button at the top of this message.] This way you can help others find the successful resolutions of questions].

  ---

• Update causing the computer does not start...

  I downloaded the last windows update last night and now my computer will not boot even upward... to have to borrow another computer to try to find an answer!  I don't know even what updates have been downloaded, because I did it just before closing down.  I have Windows Vista 64-bit. What should I do?

  mizchevas01,
  As Paviro suggested, you should try to start in Safe Mode.  If you are able to do it then you can try a system restore to an earlier date updates.  So, I suggest that you install the updates one at a time (make a note of which one, you install every time) and see if the problem occurs again.  If you know one that has the problem and this will help solve the problem.
  You should also check that all your drivers are up-to-date.  You should go to the website of the hardware manufacturer to obtain the latest drivers. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can't get through the screen "install updates" off the computer

  When I turned off my computer, Windows 7 has started to install updates. Once he arrived in 6 of the 8 updates installed, start the computer, installation. The computer remained on the same screen for 8 hours. I tried to turn off the computer, but when I turned it back on it went straight to page "6 on 8 installed updates. CTRL + Alt + Delete does nothing no more. How can I get rid of this problem, so I can actually get on the desktop?

  Hello

  References to Vista also apply to Windows 7.

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• I keep getting error messages of dll since update to the computer.

  I get 2 dll error messages and do not know how to fix them.  They are afuhepalamutivo.dll and ater71.dll.  My computer recently updated and I have been see it since.  I don't know what kind of program is originally the proplem but I can't access the internet on this computer. Tried to restore and it worked for a few days, but then started doing it again (after the Auto-setting machine again).

  Hello

  change how to get updates for you to choose what you install to stop it happening again

  You may need to install one at a time to find the problem, we

  Make sure that you do not use Windows Update to install the drivers of 3rd material part

  Find them directly in the hardware manufacturer

  and when you see the problem update right click on it - UAC prompt - then hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  ___________________________________________________

  normally, that would be the advice given for your problem of .dll due to lack of information about them with google

  but the deos doesn't seem to be the reason why by reinstalling the Updates bring it again

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Windows updates break the computer

  I have Windows 7 and it did its updates during the shutdown and departure to the top of the computer. But this time there not even to get to the part at the start when applying updates, it just went to Windows Startup Repair. He has done this before, but it Startup Repair has done a good job of fixing any problem and I can use the computer again. This time, however, I rebooted the computer times 6 or 7 after that Startup Repair has "solved" the problem. Nothing has changed and the computer goes to startup repair. I tried to start windows normally, but he gets a fraction of the way through the bios before restarting the computer.

  Do a system repair disc (CD) on another computer of Windows 7 to the same number of bits (32 Vs 64) operating

  Start the system on CD repair system.  It will offer repair options that might work.

  If this does not work, you will probably be in more drastic measures.  Let know us and we can make suggestions.  We need to know things like make and model, age, type: laptop or desktop and more details that will help.

• I can't synchronize my new iPad with iTunes on my computer.  All software has been updated, but the computer always tells me to update iTunes on the iPad software. Any suggestions on how to get them in sync?

  I can't synchronize my new iPad with itunes on my computer.  Both had all put software up to date.  The computer continues to tell me it cannot sync and I need to update software on the iPad.  Any suggestions on where to go next?

  What version of iTunes you are using? What is the exact error message you see?

• Apps - update necessary to update on the computer?

  Update of applications through iTunes on my Windows Vista PC is incredibly slow.  I have been updating of applications on the computer and on my devices (iPhone and iPad 6plus 4 on IOS 9.1.3, iPhone 4 on IOS 7.1.2) update directly to a device seems to be faster.  Constanting update applications directly on the computer and each device seems an unnecessary duplication of effort.

  Is it necessary to update the applications on the computer?  If applications on devices are maintained directly on the devices, only applications on the computer updated when I do a sync?

  However, I guess if I have only updated the applications on the computer, applications on the devices would probably be updated when I synced and it would save me download the upgraded several times (for each device separately) applications.  However, the update via iTunes on the computer is so slow, I think I still prefer making updates directly to each device, even if it's multiple downloads.

  Any ideas or advice would be much appreciated.

  Here's the breakdown.

  1. the new iOS supports "App thinning."

  When you download directly from a device while resources (size images, screen resolutions,...) which are used on this device are downloaded.

  The application downloaded for example on an iPhone 5 has no resources for other Apple devices (iPhone 6, iPhone 6, with mini iPad, iPad...)

  One of the reasons for the download is faster because it is smaller

  2. applications using the computer to download iTunes have all the necessary resources for all the supported devices when you synchronize.

  It is also a backup in case the developer pulled the app on the app store then you will not be able to re - download from the app store.

• I can't open firefox running but not responding not window opens and says to close the existing window. I can't do that the computer does nothing to help. I did all the suggestions here. I uninstalled and reinstalled firefox

  Firefox does not open. I get firefox is already running but not responding no window... I tried to restart without help. I tried to put an end to the process via Ctrl + Shift + Esc and nothing firefox is registered to complete. I tried to find the application via the icon data run in the start window, I have no icon running on this system (Acer with windows vista (?)

  This has happened

  Each time Firefox opened

  The computer was hard to close and made an incorrect scan stop when it has restarted

  User Agent

  Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; FunWebProducts; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729)

  Uninstall and re - install Firefox does not affect your personal data and settings in your Firefox profile folder, unless specifically, you select this option when Firefox un0installing - but which removes "all your personal data and customizations.

  Have you tried to create a new profile after a cold start?
  http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

• Update of the program says that a previous update needs the computer to restart the computer prior to installation.

  Original title : My system keeps thinking there is a update it needs to close and restart to. No way to get rid of this problem?

  I'm trying to upgrade a program on my computer, it I get a message that an another update has been installed and to restart the computer to complete the update to previous, but there is no previous updates.

  Also if I have "Automatic updates" on, the window keeps popping up that I have to restart my computer to complete the update, but after restarting the computer 10 to 20 times, the message from computer restart keeps coming back.  I had to disable "Automatic updates" in order to get the work done.

  I have enabled updates 'automatic' and off several times, rebooted the computer several times.

  I'm trying to update Internet Explorer 6 with Internet Explorer 8.

  I have not installed anything new recently except the automatic updates, Microsoft sends through.

  I tried to use this link, but it must go through the process that is blocked.  He also wanted to restart me the computer and try again.  http://support.Microsoft.com/kb/906602

  See: http://support.microsoft.com/kb/948065

• can not turn on windows update on the computer or windows update site

  I am running windows xp. tried to start bar of tasks with pc Security Center. I tried to get the updates of the automatic windows update site, but apparently if you do not have automatic updating enabled you cannot run the software on your computer

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• my computer was off which I never do. Now, I can't remember my password to access the computer. Can someone help me with this

  I forgot my password to get on the computer. Do not know how to retrieve

  Hi CLala,

  You can follow this link & check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  Note: Check out this article which describes the missing Microsoft strategy, lost, forgotten, or incorrect password.

  Microsoft's strategy concerning lost or forgotten passwords

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.