Windows updates break the computer

Similar Questions

• can not turn on windows update on the computer or windows update site

  I am running windows xp. tried to start bar of tasks with pc Security Center. I tried to get the updates of the automatic windows update site, but apparently if you do not have automatic updating enabled you cannot run the software on your computer

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• anniversary 10 Windows update breaks the bootcamp drivers

  I bought the home edition of windows 10 must be installed with bootcamp on my Mac Pro (latest version).

  After a few seconds the bootcamp drivers installation, I get a blue screen saying "kernel Security Check Failure. I tried to re-parititon and re - install windows with bootcamp 10 several times and the results are the same. I found an earlier version of windows 10 online and when I tried to install it, the problem goes away. but then when I update this old windows 10 with the update of the anniversary, the problem appears again. so I guess that the problem is related to that! in safe mode I get no blue screens. today I intend to try to uninstall the driver of each training camp in a tower, until I tell me what is the cause of blue screen. so far, I removed the graphics drivers, but the results are the same.

  If anyone can provide all the information on how to study this issue further away, or maybe even solve it, I'll appreciate it more! Thank you

  My Sepcs are:

  Graphics card: Dual AMD over-pants D300

  Processor: Intel Xeon E5 1620 v2

  Memory: 12GB DDR3

  I suggest you that stay with the working version. Please see Re: Windows 10 anniversary + Boot Camp = Assembly is more Mac partition for more details.

• Windows Update breaks the connection to the Internet screen Windows 8 start

  At the start of a newly refreshed State, if I install an update from Windows Update or driver, my screen Windows 8 start apps can connect is the Internet. My desktop connection continues to connect to the Internet just fine.

  I have goes back to the fact that my active network is deleted. The newly refreshed State presents a public network in the network and sharing Center under "view your active networks. I can then change for private and create a homegroup, if I want to. After an update has a happy ending, this active network gets blown away and he said: "You are currently not connected to all the networks."

  How to fix this State without update Windows and how can I keep Windows Update to do this in the future?

  OK guys, I also had the same problem. I messed around with my PC for about 3 weeks and I found the solution for me.

  Is the internet connection marked as connection from home or at work. I changed mine public (charm > setting > connection > right click on the active connection > turn sharing or disable > No, (for the network in public place.)

  Hope this helps you all.

• Update Windows automatically restarts the computer. I would like to disable this feature.

  Update Windows automatically restarts the computer. I would like to disable this feature. I'm running a machine business with complex projects requiring a configuration long and delicate. The details below:
  Type of operating system: Windows 7 Ultimate
  Problem: Status of the project lost after auto restart during the night
  Require: A method of disabling automatic restart after an automatic update is happening.
  Tried: I already tried looking in the registry for an appropriate key change, but no have been found appropriate.

  Aelryn,
  You can configure Windows update to meet your needs, for example, download the update and then let me choose when to install the same. This way you always get the automatic updates but you chose when and where and how to install updates at a time that is convenient.

  Then I suggest to change the Automatic Updates settings to meet the needs of PAHO.

  Choice, you can turn off to THE (not recommended), you can adjust to download updates only and allow you to install them at a convenient time, you can adjust information only, or you can leave to do what he likes.

  If you update, you must restart sometime in the case otherwise you are not protected and you might as well do not update at all. Everything is a matter of choice. One size does not fit all, so a choice can be made. I have updates informed me only, then I decide what, when and how to do to install the updates. It's my choice.

  FYI -.
  http://blogs.technet.com/Mu/archive/2008/10/02/Windows-Update-and-automatic-reboots.aspx
  TaurArian [MVP] 2005-2010 - Update Services

• I am unable to do the windows updates. My computer States tries to install 1 of 25, but no progress.

  I am unable to do the windows updates. My computer trying to install updates, but is blocked to install 1 of 25 updates.

  What should I do now?

  Thank you very much. I solved the problem using Fixit after a suggestion of TaurArian.

  Also, he told me how to not to receive other suggestions.

  Thank you for your help.

  Susan J.

• I am unable to do the windows updates. My computer States trying to update 1 of 25, but no progress.

  I am unable to do the windows updates. My computer States trying to update 1 of 25, but no progress.  I tried several times without success.

  Suggestions:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

• Windows Update crashed my computer, sending me into the 'frustration after the reboot loop.' I use Vista, by the way. (Even worse!)

  Hi MS. victims (be strong!)

  I have the same problem about the update of windows. What happened was that I had put just internet access at home, so I was invited later to "new windows updates available" so I agreed. After about an hour (because he was that much) it was done and was ready to be restarted. so I restart my computer without hesitation because I had already created a restore point. The Blue Screen of Death. so he started to happen... the "loop." no Safe Mode. no last good configuration that worked. No command prompt. none worked. I mean, it's just bad.

  Victims of the SP, please help. I use vista, by the way. even worse!

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code.

  I need help to activate my computer but I don't have the code. I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code. I tried to contact the guy but he won't answer. Is it possible to check the activation without the code? I need help and do not want to pay a hundred dollars more.

  Is there a COA sticker that is attached to the machine?

  If so, check to see what edition and version of Windows machine is licensed to:

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  Also:

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Windows Update breaks black Lenovo 2 sensors, inevitable system upgrade

  Hello world

  Played with the 2 black of Lenovo for a few days now and I live the boring problems.

  I did about 3 x cooling system so far and on my 4th I'm typing this...

  I don't know the exact origin of the problem, but I don't know that one of the windows update break sensors causing its functioning and the breakdown of some features.

  • Accelorometer works at startup, disable and re-enable the sensor in the Device Manager.
  • Try using the search or the PC in Metro UI settings feature freezes the tablet.

  With each update, I made sure that no update driver is selected, but that doesn't seem to help.

  And the most annoying part is refreshing that the tablet takes forever... (2-3 h)

  If anyone has the same problem or an overview of what is the cause? Please share your knowledge

  You have a sd card? If so remove and see if it works better?

• Cannot download the updates on the computer

  Original title: how to get updates on windows 7, mine does not update

  mine shows all the update failed, always looking for new updates, but the computer never downloads none

  Hi bonnie563,

  What antivirus or firewall is installed on the computer?

  Follow these steps to solve the problem.

  Method 1: Solving problems run Windows Update

  Windows 7 comes with a built-in utility to update problems. Run it and see what has to say. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2: Temporarily disable the firewall or a third-party antivirus software

  If you have any third-party firewall/antivirus, disable all and just keep the built-in firewall of Windows when downloading updates. See if this allows you to perform the download.

  Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this solution to workaround but are providing this information so that you can implement this workaround at your own discretion solution. Use this workaround at your own risk.

  To disable the third-party firewall, see the documentation provided with the program or contact the program vendor.

  Method 3: Turn off Accelerator software

  Disable any software accelerator programs that may be running. Some examples of these programs are file download accelerators and Internet speed accelerators.

  Method 4: Journal see Windows Update

  By default, the Windows Update client records all transaction information in the following log file:

  %WINDIR%\WindowsUpdate.log
   
  If the methods above does not resolve the issue, view the log file for more investigations.
   
  For help on the log file, see: How to read the Windowsupdate.log file

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update froze my computer

  My Windows XP pro service pack 3 Auto turned into a brick.  (IE8)  I finally used in June 2013, and it worked very well.  On October 12, 2013 I turned it on and it does nothing.  The problem was caused by something that happened when the aircraft attempted to do the automatic update of Windows.  I managed to open the Task Manager and saw the CPU pegged at 100%.  The culprit was one of the svchost file.  So then I used the utility windows Explorer process to identify and disable the problem, which was windows update file.  With the windows update file stopped, the machine works normally.  I tried to make the windows manually update and had no success.  The cpu went to 100% and the machine froze.  I left it on all night, looking for updates and the morning revealed that he had tried to install an update, but the installation failed.  I'm guessing that some update issued between June and October 12 is the cause.  Can anyone give me some ideas on how to correct the problem, other than leaving the updates turned off.

  Hallelujah! I have my computer back.  Here's what I had to do.

  1. I did a fresh install of Windows XP Pro (not a repair, but I formatted the hard drive first).

  2 installed service pack 2 on a drive that I had, but it is available on the web, if you're looking for.

  3 installed the service pack 3 on the web (do a search found).

  4 tried to do the Windows updates, but could not. Kept getting error 0x8024D001.  So I did a search on this error message and found that I needed to install an update from Windows Update version. I found this one installed it.  Here's where I got it from.

  http://social.technet.Microsoft.com/forums/en-us/89a7a3dc-6c50-4481-A184-c7815990b486/window-update-not-working-get-invalidinfdata-how-do-i-find-which-INF-file-is-bad

  5. the new program Windows Update worked and I was off to the races. Must have been at least 200 updates. Had to reboot and run Windows update several times to get all the. But in the end, I have the machine is working back again.

  Hope this helps some of you people who are tearing your hair because the Windows updates turned your computer into a brick.

    

• I get an 80070663 error when installing an update on the computer.

  Original title: impossible to install KB2687499 on Windows Vista

  The microsoft Installer Update continues to detect sequences of security update Microsoft Office (KB2687499) 32 - bit Edition if necessary to install on my system and continues to fail.  So I downloaded the update manually, but when I run it, I get the message: "Please wait while the update detection is to be run." and then I get the message "an error has occurred during execution of detection."  I called the Help Center (SRX1193068976ID) and gave them the windows update 80070663 error code.  The representative sent the following links:

  < your="" answer="" tech="" thought="" you="" might="" find="" these="" links="">
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-80070663/869d5ea6-9892-4273-A43D-26ee4f42efe2

  http://support.Microsoft.com/kb/913754

  I followed all the instructions and I can not yet solve the problem.  Any help would be greatly appreciated.

  Thank you
  PAM

  Hi Pam,.

  Thanks for posting your query in the Microsoft Community.

  You have a problem with the installation of an update on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) what is the exact error message?

  (2) you are able to install other updates on the computer?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 1 and 2 require changes need to be made in the register. You must back up the registry before you proceed.

  I would have you look at the article-

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2-

  I would have you look at the article-

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Note: The Chkdsk scan will try to identify and repair bad sectors on the hard drive. All the data on these areas could be lost in the process. The computer can also enter a no start condition.

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• I am sure that I have sirefef and I can't start the firewall, windows update or the center of security.

  Hello, I'm sure that my computer is infected with a sirefef, I want to know if there is a free way to get rid of it, I ran so many antivirus scanners and malware/rootkit software and is not fixed. When I try to start the firewall, he says that he is unable to make these requests, Windows Update said the service could not be started, and says Security Center of service could not be started. Please help and I hope that my problem will be solved. Ask if you need more details. Thank you.

  Hi Brendan,

  Let's see the article ""failed Windows updates Setup. " Restoration of the changes. "Do not turn off your computer" error when you try to install the Windows updates "and check if we get a fix for the problem.

  http://support.Microsoft.com/kb/949358/en-us

  For now, ignore the steps mentioned under: using the feature in Place Upgrade (Windows 7 and Windows Vista)

  Keep us in the State of the question.

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.