Upgrade and increased use of fashion related to two embedded vCenter 5 installs
Hi all
I have a question. I would like to upgrade our vCenter 5.5 to 6.0 update1 and at the same time instances to begin to use related methods improved.
Currently, we only use modes related to 5.5, but we would like to use in the 6.0.
The two vCenter running 5.5 are shipped installed (vCenter + SSO in the same VM).
VMware vCenter Server 6.0 Deployment Guide, I read and I find anywhere a upgrade path for our scenario.
In my lab at home, I managed to install 2 CSP between a CITRIX Netscaler and 2 vCenters connected to loadballancer and use improved methods related to vCenters but these where initial installs so no upgrade.
Anyone has an idea about this scenario upgrade?
Thank you
Mircea
I had a similar situation, and while I found a few ways to use enhanced bound mode with incorporated the PSC, it is not technically supported by VMware.
However, I have deployed two new external to the PSC (two sites) and two VCSA w/o the embedded PSC. I joined all in the same domain.
Once it was in place, I improved my previous VCSA, who had the PSC on-board, to 6.0 U1 and used the new option repoint via CMSSO-UTIL to point of the VCSA existing on the same domain than the one I just created with two new external to the PSC. I was then able to migrate everything to the two new vCenters.
http://emadyounis.com/vCenter/vCenter-server-appliance-VCSA-6-0-Update-1-rundown/ (Info on the format of the command CMSSO-UTIL near the bottom of the page).
Looks like more work that it is, and the result is a nice clean environment, no down time to VM and two external to the PSC which reproduce and two VCSA who linked enhnaced active mode.
If you go down this road and you have problems, let me know, I can try to help.
Tags: VMware
Similar Questions
-
VSphere ESXi4.0 - need help upgrade and increase the size of disk to the server
Hello
I have the free version of the VSphere ESXi4.0, I'm looking to do 2 things:
(1) Upgarde to the last free version of Vsphere. Can you point me to the upgrade of the software and the path correct upgarde?
(2) I have 2 servers running in the machine. One is a Windows 2008 R2. I need to increase the size of disk for this server. Currently, it is 144 GB. I need to increase it up to 260 GB. How can I do this? I tried to simply increase the size by increasing the C of this server disk Edition by the 40 to 80 GB VSphere client and D ranging from 100 GB and 200 GB drive [I'm running out of space]. But the Vsphere shows again that the orginial 140 assignment or not the new 280 Gb.
Help, please. Thanks in advance
You must go into Windows on the virtual machine and use the disk management tools to extend the volume. It is a two stage process where you first set the VM, then the second step is to adjust the windows.
-
Upgrade and migration of V11.1.1.3 to V11.1.2.2
Hi all
Currently, we use Hyperion Essbase Server V11.1.1.3 in Windows Server 2003 R2.
We are in a plan to upgrade and migrate to Essbase V11.1.2.2 server in Windows Server 2008.
We use only Essbase w/o Shared services.
Could you please provide me with the following information:
(1) the question of whether LCM Utility can be used to perform this upgrade and Migration of V11.1.1.3 to V11.1.2.2 (do not use Shared Services)?
(2) any of the documents w.r.t. this upgrade and Migration using the LCM?
Kind regards
Swathi.LCM is part of Shared Services, so if you do use shared services, so you won't be able to use.
See you soon
John
-
I saw this question and answer:
http://social.answers.Microsoft.com/forums/en-us/w7files/thread/5c567ab1-208D-400D-9bce-0598d43a0574
but I think I have a more serious problem. In Windows 7 RC, when I plugged in my camera or insert a memory card, I could choose "import pictures and videos using Windows Live Photo Gallery", but in my new installation of Windows 7 RTM, on which I have installed Windows Live Photo Gallery, there is no "Import pictures and videos using Windows Live Photo Gallery" option allotted me in the list of Control Panel AutoPlay or on the AutoPlay pop-up that appears when I plug in a camera.
How can I get that back? Without this option, I have to go through the manual steps tedious to execute WLPG and manually choose to import from there and say what is my camera. It was much better under Vista and Win7RC when I had the simple auto play option.
My PC is running Windows 7 Professional 64-bit, but I also installed WLPG on two new computers Windows 7 Home Premium 64-bit my parents, and they have exactly the same problem. Is this a known bug? Is there a solution?
Thanks in advance for any help you can offer!
Hello bitoclass,
Thank you for visiting the Microsoft answers Site.
The Windows Live Photo Gallery import Option is not available from the AutoPlay on x 64 systems. Try the underside of work around to see this option.
http://support.Microsoft.com/kb/967904
Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
I hope this information is useful.
Thank you
-
To print messages in Gmail, I used to click on "Firefox" in red at the top left. I upgraded and now it's gone. I would like to print an email I received. How do I do that?
Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).
You see the orange Firefox button if the menu bar is hidden (view > toolbars).
If the menu bar is hidden, then press the F10 key or hold down the Alt key to make the call of menu bar.
Make toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars" or "Firefox > Options.
-
The site
https://Fourwinds.com/OCF/login.php
only works with Firefox as browser. The webmaster does not have upgraded and debugging for use with Firefox 4. I'm hoping to find a copy of the version 3.0 - ish to be able to access this web site. Any suggestions?
You can get Firefox 3.6 http://www.mozilla.com/en-US/firefox/all-older.html
If it's just for a site, an alternative is to keep Firefox 4 but install the portable version of the earlier version of Firefox on your hard drive. You can get http://portableapps.com/apps/internet/firefox_portable - section version inherited at the bottom of this page contains links to older versions of Firefox.
-
Can I upgrade OS 10.8.5 and always use Adobe Creative Suite 5?
Can I upgrade OS 10.8.5 and always use Adobe Creative Suite 5? Also many design fonts Adobe I used for years.
Abobe CS5 works very well for me in El Capitan. All fonts work ok it stable and fast.
I hope this helps.
See you soon
Pete
-
I just upgraded my ipod touch to ios 9.1 5 and he used to upgrade silde
This morning I upgraded to ios 9.1 and it went through, but before you use it you have to slide to the upgrade and it does not work and it won't let me drag
If the slide on the upgrade screen does not disappear once you upgrade to iOS 9
-
520 - 1020UK: Windows 10 - Office upgrade flashing and cannot use
I have seen many people announcement about all over the internet, but for the moment do not found a clear solution to my problem. I registered for the upgrade everything on time and the 'check' has said that my system was very good. It is a HP TouchSmart 520 and 2 to 3 years.
Today I got the message saying that I could do the upgrade and everything seemed to be fine, no errors during installation. However, as soon as a user opens a session on the desktop just flashes and you cannot access anything other than ctrl-alt-del and the Task Manager.
I tried to boot into safe mode and try an update of windows (boot in safe mode with no Flash), but he can't find anything, and I looked on the HP website to see if there is a driver W10. It gives you a file to download which must check the drivers, but that does not work in safe mode then a non-starter. And if I use the HP site it basically says that you need to use the windows update; that just sits there doing nothing.
If I go into Device Manager and try to update it says that the graphics driver is up to date. I'm a little cut that the HP site suggests that it is a product that has not been tested with W10, but Microsoft control said everything ok. Help, please
Sorting problem, an answer on the forum to Microsoft solved the problem. I downloaded Norton removal tool (Norton was mentioned as a possible cause) and deleted all of this - and now the PC works fine. Now to connect with Norton, I'd paid subscription for the next year!
-
Can I use a disk Windows 7 Home full version and just use the key to version upgrade license?
Original title: the reconstruction of my PC - Windows 7 issue.
I will be rebuilding my PC which has Windows 7 Home 64 bit installed. I did the upgrade from Vista to Windows 7 with a family 3-pack. Can I use a disk Windows 7 Home full version and just use the key to version upgrade license? Seems a little ridiculous that I have to install another OS and do the upgrade. I searched the forums and could not easily find an answer to this question. Help, please. Thank you!
Also note that as you change not the motherboard Windows should not require re-installation and activation.
J W Stuart: http://www.pagestart.com
-
Cannot find the key to upgrade and want to upgrade by using Windows Anytime Upgrade
Express Windows upgrade: I find my upgrade key. I have the box with the product key, and on the underside of the laptop, I have a number of different product key? What should I do? I want to update to Window7/svs pk 1 ultimate if I can. Thanks for any help. Binner
Hello Binner-731,
The product key on the bottom of the computer is for the operating system that was previously installed when you purchased the computer. Windows Vista?
The product key on the box is for any operating system you purchased. It seems that you have purchased Windows 7 Home Premium. Where did you get the Windows Anytime Upgrade disc? Have you downloaded it?
Look at the following:
http://Windows.Microsoft.com/en-us/Windows7/help/videos/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-UpgradeS FAQ for Windows Anytime Upgrade:
How much does each edition of Windows 7 cost?
You will see information for each edition during the Windows Anytime Upgrade in price process. You can also go to an electronics store to see prices and to buy a Windows Anytime Upgrade key.
How can I purchase a Windows Anytime Upgrade key?In most places, you can go to an electronics store to buy an upgrade key.
In Australia, Belgium, Canada, Germany, France, Italy, Japan, Netherlands, Spain, Sweden, Switzerland, United Kingdom and in the United States, you also have the possibility to buy a key to upgrade online.
What should I do if I bought a package of Windows Anytime Upgrade key card, but there is no upgrade key inside?If you bought a package of key card upgrade and the upgrade key is not inside, carefully read the instructions on the packaging. You may need to go online to get your upgrade key by using the PIN which is included in the package.
Can I use Windows Anytime Upgrade to upgrade an earlier version of Windows to Windows 7?No. Windows Anytime Upgrade impossible to move from previous versions of Windows to Windows 7. Windows Anytime Upgrade is designed only to upgrade your computer an edition of Windows 7 to another edition of Windows 7.
http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questions
Let us know if you still have any questions.
Marilyn
-
I have a server/database running Application Express 4.1.1 and a server/database active Application Express 4.2.0. Is it risky to try to upgrade them both to the latest version and start using the universal or complex theme? Is how easy it to do? Recommended?
The servers are windows 2008 r2. Don't know if it matters.
I'm not exactly an expert at the express request...
Hi DJake,
DJake wrote:
I have a server/database Application Express 4.1.1 running and a server/database Application Express 4.2.0 running. Is it risky to try to upgrade them both to the latest version and start using the universal or complex theme? Is how easy it to do? Recommended?
The servers are windows 2008 r2. Don't know if it matters.
I'm not exactly an expert at the express request...
Please read the documentation of the requirement for Oracle APEX 5. Ensure that your environment meets these requirements. Upgrade your oracle database or other software if necessary components and then you can go right 4.1/4.2 to 5.0 update according to the above-discussed upgrade strategies in the above discussions.
Reference: https://docs.oracle.com/cd/E59726_01/install.50/e39144/pre_require.htm#HTMIG376
You should go for upgrade of the Oracle APEX of 4.1 to 5.x. Regression test your applications to remove if any errors introduced by upgrade. The kickoff of a new project to migrate your applications to universal theme.
Reference:
- Re: upgrading to 5.0 - best practices
- Re: APEX late upgrade
- https://www.YouTube.com/watch?v=o8S4bg4Vo0A
Kind regards
Kiran
-
Hello, I have an old MacPro with OSX 10.7.5, I bought used a Creative Suite3 Premium CS3, but it's an upgrade and I have more the CS2 version. I can't use it, what can I do?
Translation attempt (automatic):
Hello, I have some old MacPro with OSX 10.7.5, opportunity, I bought a Creative Suite3 Premium CS3, but it's an upgrade and I have not any version more CS2. Cannot be useful for me, what I do?
You can try using the serial number from here, error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3
-
I have Dreamweaver CS6 but want to update for cc, how ever I did mine and I sign in and upward at the site web adobe and want to use css Designer because with my courses, I do and they use CC. How can I get the upgrade with this new refund. Thank you
There is no way to update the version of perpetual license / DWCS6 drive to the creative cloud, they are two completely separate programs. There used to be a discount for the Creative Suite owners switch to CC, but that ship has sailed.
If you want to the CSS designer, you will need a subscription here: pricing and membership creative cloud plans | Adobe Creative Cloud
-
I installed Acrobat DC (upgrade) and it will not be installed. When is request a serial number from the previous it is not accepted. I use 9.0 which doesn't show in the drop-down window. How should I proceed?
Hi davidm1224,
I regret that we do not any version upgrade to Acrobat DC of Acrobat 9.
You can buy the full version of Acrobat DC.
For more details, please visit: Plans and prices | Adobe Acrobat DC
Let us know if you encounter any problem.
Concerning
Meenakshi Negi
Maybe you are looking for
-
4SNS/1/40000001:VPOR-7.015
My Macbook Air started acting glitch. I ran the test equipment and got this error code. But does that mean? I googled and read and can't seem to find the answer. Any help is greatly appreciated. Thank you CMW
-
How can I change the size of the address bar in firefox 18?
I want to make the address bar much smaller and much bigger search bar (I want still allows them to use the full width of the toolbar). I read elsewhere in the forums that you can change the size of the bar by going to CUSTOMIZE and once the cursor t
-
II have restored my iPod to factory settings and remove all content, but it is still called Richards iPod when I look in the settings. How to remove the name I want to sell on
-
<; CLOSED >; USSD / Test Mode / Debug Codes
EDITED POST - DELETED DATA
-
Sorry I put it in the title of an accident