Upgrade are failed! WRT54G_v2
130228_1900est
Hello
troed just re our WRT54G_v2 FIRMWARE update
Current FIRMWARE
Firmware version: v3.37.7
downloaded and tried to run
130228dl_LINKSYS_FW_WRT54Gv4_4.21.5.000_20120220.bin
BUT I got the msg'
Upgrade are failed!
What's wrong?
Thank you
Steveg722
USA_RI_02917
RETIRANT MY QUESTION (due to error of the operator here)
seems the correct MODEL = WRT54GS_v2 (not WRT54G_v2)
by
http://support.Linksys.com/en-us/support/routers/WRT54GS
No available firmware/driver download
Sorry end which
be well
Tags: Linksys Routers
Similar Questions
-
Hello
I have the Firmware Version: v1.00.6 and every time I try to update to the last it says "Upgrade are failed!" Any help would be appreciated.
Thank you
If you have a router version 5 why you download and install firmware version 1? You must 1.02.8 according to the web site for version 5.
-
Linksys WRT54G ' upgrade are failed!
Hello
I have the Firmware Version: v4.21.1 and every time I try to update to the last it says "Upgrade are failed!"
N ° you must use only the versions of firmware to 2.2, nothing else. Firmware 4.21.1 is the last so there is no need to upgrade.
-
The WRT54GL v1.1 firmware update: "upgrade are failed.
I'm updating my WRT54GL v1.1 firmware. I downloaded a file called FW_WRT54GL_4.30.13.016_US_EN_code.zip, which I unzipped to produce a file with a .bin extension. I use the web interface to update the firmware with the .bin file and get the error message "upgrade are failed" very late in the process of upgrading. I tried to reset the router by pressing the reset for 30 seconds button, but it does not help. I use Safari on a Macbook Pro under Snow Leopard 10.6.2. Any help is greatly appreciated.
Try to use different browser and check... If possible try to use Internet Explorer.
-
It just says: the upgrade has failed.
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
Network adapters: Microsoft Windows Mobile remote adapter causes the Windows 7 upgrade to fail.
I did everything to prepare for the upgrade. The Upgrade Advisor says it all right. But I get the message that this network adapter is a problem. It does not appear in device menager even under hidden objects, so I can't uninstall or update.
It is obviously a problem for more than two years. Why is there not a difficulty now, or at least a well validated response that meets this situation rather than simply repeat the statement to execute the Advisor (done) or update the driver (which is impossible because the card network can not be found)?
Hello
You can try these:
Step 1:
a. click the Start button.
(b) in the search box type devmgmt.msc and then press ENTER.
c. find under the "Mobile Devices" "Microsoft USB Sync" node. If this is not present, proceed to the next step. Otherwise, right click "Microsoft USB Sync" and choose "Uninstall".
When you connect your USB phone, it should appear in the device under Mobile Device Manager. Education invites you to look out there and if you find Microsoft USB Sync, uninstall it. If she is not there, go to the next step.
Step 2:
Disconnect, and then reconnect your device. Your device driver will be re - install and launch Windows Mobile Device Center.
-
Portege Z930 - Win8 Upgrade offer fails
Hello!
31.Oct.2012 we bought Portege Z930 - G1S (PT234R) - quite an expensive laptop with Win7 Home Premium OS.
We have reduced by thinking, we are entitled to Win8 upgrade, but as we walked into our data on the Microsoft site - they told us we are not allowed.
We have tried to achieve the support of Toshiba in Russia - http://ru.computers.toshiba-europe.com/innovation/contact_toshiba.jsp
Several times a month.But all mails are back with the error "invalid recipient address.
How is it possible that support Toshiba official site is an invalid address blacklisted?
How is it possible that Toshiba laptop recent and rather expensive subject program of upgrade of Windows 8?Thank you.
Hello
Please check this page how to upgrade to Win 7 to 8 Win:
http://EU.computers.Toshiba-Europe.com/innovation/generic/Windows8-upgrade-stepbystepThe point is that you must order Windows 8 from Microsoft and install it.
If it fails, contact Microsoft why the order to win 8 failed.Of my knowledge Toshiba provides a Win 8 drivers. You can get this driver TOSHIBA Upgrade Wizard, but you can do this after the installation of Win 8!
I found this page Toshiba win 8 Win 8 upgrade information
http://EU.computers.Toshiba-Europe.com/innovation/generic/Windows8-message -
I'm trying to upgrade a HP Pavillion a6720y Vista Home Premium 64 to Windows 7 Home Premium 64 via the official HP upgrade disk that I ordered a few years ago. Whenever he tries to boot into Win7 for the first time that it fails on the file "JRAID.» SYS'.» I have 3 internal drives on the (starting) SATA1 and SATA2 (data) and a DVD-ROM, SATA3 and USB external disk BIOS interface is (and was) the RAID value (even if they are not mirrired or scratched, just separate the readers). I found a newer version of JRAID. SYS and installed, but now it fails on "JGOGO." SYS"(says file is missing or corrupted).» My version of Vista is using the same version of JGOGO. Facilities SYS Win7 and says is corrupt.
Any help would be appreciated. Thank you.
I forgot to add, I also had problems with getting Windows 7 update for the first time. Updates (more than 130 of them) would be to continue for awhile, then seems to hang for hours. I downloaded the Windows 7 SP1 from Microsoft (make sure you choose the right version, 32-bit or 64-bit) and installed everything first. It takes time to install it, but it finally finished ok. Then I rebooted and installed the Windows updates required in groups of five or six instead of all at once. Don't know if I needed to do, but they all eventually installed ok.
-
Last week, I received the tablet. Since then, the OTA update failed 3 times. So I searched around the Web and found a page which State to load the update.zip to SD card and install on recovery Menu:
http://h30434.www3.HP.com/T5/Android/Pro-slate-8-updates/TD-p/5224651
But it does not work also. After the system says 'check' package it briefly shows the Android Robot for less then half a second that an i will be back to the Recovery menu.
Allocation of resources.
Thanks D.
Solved by myself.
The upgrade from SD card did not work, because the tablet had a problem with my SD 32 GB Class10 card. I used an 8 GB Class 4 and it worked fine.
-
Reinstallation of Windows 7 upgrade disk fails
I'm trying to reinstall Windows 7 on my computer, as the strain of her age is starting to show. I hope that some performance improvements.
But I get this error message:"The unattended Setup answer file contains an invalid product key. Remove the invalid key, or provide a product key valid in the answer file for unattended Setup to install Windows. »I don't know if it is just that I have a version of Finnish language of the OS and did not bother to write the error message in its complete form, but something very close to that anyway.I couldn't find any solution for this through Google. People had got this error, but it is especially in the relations of a virtual PC installation.Initially, I had Vista, but I then upgraded to Windows 7 with a upgrade disk. I'm trying to reinstall using this disc of Windows 7. My Windows 7 is genuine and I have not had problems.I think it might be because the codes to activate Vista and Windows 7 are different? Maybe I have the Vista activation code in my file without supervision when there should be order in a Win7 to make it work? Is it still possible? I would naturally opinion of someone who is a bit more up-to-date saw that I could make a mess of things just dive head on.Should what precautions I take to debug this problem and solve it.See the following topics:
If you use an unattend.xml file to reinstall and get invalid product key, you will not want to change the file.
See the following post: http://social.technet.microsoft.com/Forums/en/mdt/thread/e56aee98-c97e-4825-a960-7da2db707414
If this does not work, try the following:
Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)Select the disk partition where you want to install Windows 7 click Next.
You will receive the following warning:
The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.
(At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK
The installation program will now begin installation. During installation, your computer will be restarted several times.
Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.
You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.
-
I am trying to add the version 4.1 of U2 in the Update Manager and maintains to fail with a checksum error. I tried a few times, re-downloaded and still does not work.
Am I missing something?
How do you import the zip file to VUM? In addition, if you go to U2, you need not a base line 'Upgrade '. Just create a patch. U2 will be listed. Just make sure that you have vCenter 4.1 U2 and VUM 4.1U2 and you can create a patch database, updated and then remedy.
-
Windows 8 Upgrade Assistant failed on Satellite P775 program
I tried to start the Wizard Windows 8 on my P775 upgrade program Satellite.
He began by displaying
Verification of components; Download Windows 8 components data.
...
Components of reading.
TOSHIBA Wireless LAN indicator consisting
... etc...
Got TOSHIBA Contrasena component supervisor
Reading Windows components.then displays a Message box
'Cannot read the target (Windows 8) INI file.'How can I solve this?
Thank you
Did you follow the instructions here:
[How to upgrade to Windows 8 - useful information | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=68845] -
Toshiba Upgrade Assistant fail on Satellite L755
Hello everyone
I want to upgrade to Windows 8 Windows 7 install Toshiba Upgrade Assistant and I get an error always the same, that is: "error reading INI file target."
So I can't continue with this level of testing Upgrade Wizard, I've seen on this forum that some friends have the same problem, Toshiba will solve?
I look forward to your responses to this error, and please, I am a beginner and do not know what the target INI file.Thanks and greetings
Hello
What Satellite L755 exactly do you have and where you downloaded the Toshiba win 8 Upgrade Assistant?
-
Hi I have a problem with my mouse/pointer when I click on the mouse to open it I have error message unable to connect to the synaptics pointing device. Have you checked the updates that are up-to-date, and the driver is ok, not sure what to try next need to make any changes to the mouse pointer
with Brice thanks.
Hi paiyay,
Thanks for posting in the Microsoft Community.
I understand that you are unable to open the synaptics pointing device in windows vista
· You did changes to the computer before the show?
· What happens when you click the Yes button in the error message?
· You are able to use the mouse on the system?
I suggest you uninstall the software from programs and features and then try to open the properties of the mouse and check if you are able to open the mouse properties then I would you recommend to uninstall the drivers that are installed on the system in the Device Manager and then download the drivers from the link below and check if the problem is resolved.
http://www.Synaptics.com/support/drivers
http://www.Synaptics.com/resources/drivers
Updated a hardware driver that is not working properly
Connect the hard disk, and then try running the fix tool of the article below and check out them.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/I suggest you to contact the mouse manufacturer for assistance. Click on the link below.
See also:
FAQ and troubleshooting
-
How to upgrade are the value of the column and the new column value created
Hi all
create the table xxc_temp
as
Select donnees_1 'AB103', 'AAA' data_2 data_3 '123', 'RED' data_4, NULL status in all the double union
Select donnees_1 'AB105', 'BBB' data_2, '222' data_3, data_4 'BLUE', NULL status in all the double union
Select donnees_1 'AB106', 'CCC' data_2, '333' data_3, data_4 'BLUE', the double NULL status
create the table xxc_base
as
Select donnees_1 'AB103', 'AAA' data_2, '123' data_3 data_4 'RED', 'Inactive' status of Union double all the
Select donnees_1 'AB105', 'BBB' data_2, '222' data_3 data_4 'BLUE' status 'Active' of all the double union
Select donnees_1 'AB106', 'CCC' data_2, '333' data_3, data_4 'BLUE', 'Inactive' status of double
I need to update the status column xxc_temp with xxc_base value of the status column and also if the user tries to insert new values/lines in the xxc_temp
So how can I update the status column? I mean automatically set to day and also new values/lines
I need to update only that are Inactive then these lines should be updated in the temporary table
We can do this by using the stored function, but I need to update the new status of lines also
Please help me
Here's another way to do it, using VIRTUAL function column as expression to get the status of the other table
CREATE or REPLACE FUNCTION GET_STATUS (pDATA_1 IN TANK) RETURN VARCHAR2 DETERMINISTIC
AS
vstatus VARCHAR2 (8);
BEGIN
SELECT status in vstatus FROM xxc_base WHERE donnees_1 = pDATA_1;
RETURN vstatus;
END;
/
DROP TABLE 'XXC_TEMP ';
CREATE TABLE 'XXC_TEMP '.
('DONNEES_1' CHAR (5),
"DATA_2" TANK (3).
"DATA_3" TANK (3).
"DATA_4' VARCHAR2 (4).
'STATUS' VARCHAR2 (8) GENERATED ALWAYS AS (SUBSTR (GET_STATUS (DATA_1), 1, 8)) VIRTUAL
) ;
INSERT INTO 'XXC_TEMP' (data_3, donnees_1, data_2, data_4))
Select "AB103' donnees_1, data_2 'AAA', '123' data_3, 'RED' data_4 of any double union
Select donnees_1 'AB105', 'BBB' data_2, '222' data_3 data_4 'BLUE' of all the double union
Select donnees_1 'AB106', 'CCC' data_2 data_3 '333', 'BLUE' double data_4);
Maybe you are looking for
-
Windows 7 driver for laserjet p2014
I have the HP Laserjet P2014 printer. I need the 7 (64-bit) Windows driver for my printer.
-
Compaq Presario CQ56 XG809UA: Compaq Presario CQ56-1150 windows 7 to 10 XG809UA
I did a factory reset about 3 seconds in it a hacker did something at this time, the screen went black with a message of any operating system is on it, it grows once again the test memory main f11 past hard drive passed I started, I tested it again p
-
I have no sound. I should plugin to left/right backpregnant or speaker left/right side- connectors at the back of the computer?
-
I had also restarted the computer as recommended. But still no difficulty.
-
Important file deleted my Windows vista operating system using my anti virus!
I removed 'c:\programdata\microsoft\search\data\applications\windows\mss03e68.log' using my anti virus. Now, I think it was a bad idea. Anti virus says it was a hidden folder and acted as a rootkit! So I took it without knowing what it was! This file