Upgrade domain CUCM 8.6.2 level

Similar Questions

• Upgrade VM CUCM 8.6 to 10.5 Question

  My situation is slightly different from what is shown here. I have a client who has CUCM 8.6.2 on VM... & would like to upgrade to CUCM Ver 10.5. What is the steps & the route easier to do this upgrade? A bit confused, with messages because it is not a migration, but a simple upgrade in the virtual machine environment.

  Thank you

  Lee

  Hello

  You will need to download the utility to the cisco site license number.

  File name

  LCUZIP - Ver9.1.2.zip

  http://www.Cisco.com/c/en/us/support/unified-communications/unified-Comm...

  Run on PC whre Editor is reachable.the file would be a consiting of CUCM MAC address, IP address, csv file installed DLU, DLU used / Unnused DLUs, licenses of BASIC/Essential, UCL Enhanced, CUWL standard etc.

  Connection to the first License Manager, after having successfully migrated from 8 to 10

  Use the following procedure to generate a licence application.
  1. connect to first Cisco Manager of licenses.
  2 in the license > Fulfillment page, select generate license request in the drop-down under
  Other treatment Options.
  3. the license request window and next steps appear. Copy the selected text in your Clipboard or click
  Save it in a file on your PC and send it to [email protected] / * / to obtain the permanent license.

  regds,

  Aman

• Upgrade of CUCM 7.1.5 to 9.1 (contract No. UCS and ESW)

  Hello

  We have CUCM 7.1.5 cluster (two servers) without contract UCS and ESW.

  What would be the better and way cheaper to upgrade to CUCM 9.1.

  We intend to use our VMWare system and only buy the CUCM 9.1 software (not servers).

  The current DLU is trensfered or should we buy everything from scratch.

  Kind regards.

  Demont - my friend, how have you been? I hope you do well!  Very nice to see you

  always help others - keep it! (+ 5)

  Kasper,

  As my friend that Demont said accurately, you contact your partner Cisco Channel/Account Manager. I just wanted to add, you can migrate DLU, but like with CUCM9, you have only UCL or CUWL - according to the type of license you select UCL/CUWL, you will need to purchase additional licenses and buy the UCS. But having said that you can benefit from Cisco in the car at 9 and can buy this at a really discounted price. Your Cisco representative can explain all the options in detail.

  Thank you

  Terry

• Upgrade of CUCM CUCM 9.1.2 7.1.5

  We have CUCM 7.1.5 server cluster four on hardware servers. Recently, we have planned to spend this cluster in CUCM 9.1 on VMWare.

  If we install CUCM 9.1 on VMs and make necessary configuration, can we obtain the required Cisco license? We have UCS for this cluster CUCM

  We do not anticipate making Linux-to-Linux updated because we need some configuration changes in the new cluster CUCM. So our plan is to do a fresh install of CUCM 9.1 on VMs and migrate exsisting license for it.

  can someone explain how we should get a license for the new version and what will be needed for this?

  Thank you

  I did the same upgrade path. After opening a case on [email protected] / * /, they will tell you to use a tool called the number of licenses of Cisco utility that will generate a report. So you send this report to Cisco and that they convert the existing licenses to be used on ELM. You can check the process on the attached PPT.

• Is there a way to upgrade from Standard to Premium partner levels?

  If a partner seizes to the standard level and then wants to go to the premium level, is there a process and have the cost of work to make a difference in the plans?

  Hello

  Yes, all you have to do is reach out to our team of accounts by logging a ticket (Portal-> help & support) when you are ready to move from standard to premium.  You will only need to pay the difference during the upgrade.

  Kind regards

  -Sidney

• Upgrade CUCM 9 to 10

  While I intend to improve CUCM from 9 to 10, understand that I need to generate the v9 ELM licence application and send to Cisco to generate the v10 license key.

  Would like to confirm the license generate demand can be performed on CUCM v9 ELM before moving on to v10 PLM.

  Your inputs are appreciated!

  Roy

  Hi Roy,

  It is not so with CUCM9.

  After u upgrade to CUCM 9, you must share the generated CUCM9 file so that you can obtain the permanent license file.

  You need to share the file LCU before migrating to CUCM9. This file contacted PUB CUCM 7/8 to get the number of users of BASIC/Essential/CUWL Std.

  regds,

  Aman

• RTMT CFS alert critical after upgrade to 7.1.5.34900 - 7 CUCM

  I just upgraded our CUCM 11 Server 7.1.3 to CUCM 7.1.5.34900 cluster - 7, which was on the whole successful

  However, I am now regularly get an alert every hour about RTMT associated with CSA (see text below). Each alert always coming from the editor and returns to the other servers in the cluster, but not necessarily the same server. I restarted the publication server, which made no difference. As far as I know, there is no impact, it's just a little embarrassing to see the alerts are displayed.

  Has anyone seen something similar?

  I'll happily re - start the entire cluster once more if I thought it might solve the problem, but our process of internal change to a server re-boot is a pain I want to avoid!

  dec 17 15:35:43 CUCM-PUB local4 02:28: CUCM-PUB: December 17, 2012 15:35:43.429 + 0000: % CSA-2-EVENT_CLIM_DENY: % [PID = 4325] [component = CiscoSecurityAgent]: the process of ' / usr/local/platform/bin/clm/clm ' (as user root (0) root group (0)) tries to establish a TCP connection with 10.10.10.12 on port 8500 and exceeded the limit of the specific rate of 100 connections in 1 minutes. The operation was refused. [rule 2050]

  Concerning

  Kelvin

  Hi Kelvin

  You can try restarting the Cluster Manager service for some your nodes for which you found alarms. To restart the Cluster service manager use the following command:

  Restarting the service Cluster Manager utils

  Concerning

  Aditya Gupta

• CUCM 9.1.2 to 10.5 upgrade

  Hi all

  I tested reclassification CUCM 9.1.2 to 10.5 in my lab. As I read before, we need some COP files to download CUCM before the upgrade procedure.

  Cisco has named this upgrade as , and during this process, version RHEL modernize also with CUCM version.

  On my test, I do not download any file of the Conference of the parties before the upgrade. Uprade to version 10.5.

  Before upgrading my RHEL version was 5 (32-bit), and after the upgrade, it is 6(64 bit).

  After upgrade, everything seems ok, but upgrade took a long time, like 4 hours.

  During the upgrade, there is no link with CUCM and blue screen, I saw :)

  What is your opinion? This method works on the customer's environment?

  You test this procedure before?

  Best regards

  Mesut

  Hi Martin,

  I have never upgraded of CUCM 9 to 10 but made a migration of CUCM 7 to 9, which took nearly 7 hours for a single server. So, if you have two servers in a cluster, your time would be app.13 to 14 hours, which of course depends on your /configs DB.

  In addition, I was checking the upgrade path for the files of the Conference of the parties, but I have found no such requirement CDP file before the upgrade of CUCM 10 of 9.1.2

  regds,

  Aman

• CUCM 9.1.2-> 10.5 failure (2)

  Hi all

  I am trying to upgrade our CUCM 9.1.2 (SU2)--> 10.5 (2) (UCSInstall_UCOS_10.5.2.10000 - 5.sgn.iso)

  I believe that I made the requirements of upgrade:

  • Our equipment is Cisco UCS with old 'Medium' UCS tested baseline for 2500 users. Each node has 2 x vCPUs.

  • 9.1.2 (SU2) tp 10.5 (2) is described as a "Direct Upgrade.

  • I have / had at least 30 GB of free in the common partition on each node

  • ciscocm.Version3 - keys.cop has been installed on all nodes

  • I have not installed the file COP refresh_upgrade, I'm upgrading to 9.1.2 (i.e. no pre version 8.5)

  • The specification of the virtual machine meets all the conditions for 10.5 (2)

  Installation goes for about 1.5-2 hours before it is "Post-installation" tasks where is fails at the point 6 or 6 of "Installation component database.

  E installation log shows:

  24/01/2015-17:24:02 component_install | File: / opt/Cisco / install/bin/component_install:807, function: exec_progmeter(), / opt/cisco/install/bin/progmeter has not (1) |

  24/01/2015-17:24:02 appmanager.sh | Error function, File:/usr/local/bin/base_scripts/appmanager.sh:273, internal: refresh_upgrade(), does not have refresh_upgrade components infrastructure_post |

  24/01/2015-17:24:02 post_install | File: / opt/Cisco / install/bin/post_install:961, function: install_applications(), /usr/local/bin/base_scripts/appmanager.sh-r-mise at level failed (1) |

  24/01/2015-17:24:02 post_install | Output with result 1 |

  24/01/2015-17:24:02 post_install | INSTALL_TYPE = "refresh upgrade |

  It seems very similar to the Cisco support forum question: https://supportforums.cisco.com/printpdf/12334191; However, I was able to remove the AUNP numbering plan; I suspect because I have a number of models road, use it and do not want to delete.

  I have improved the numbering plan in an attempt to address the issue, but the upgrade still does not work.

  Any ideas would be very appreciated.

  Thank you

  Kent

  I encountered this problem on several upgrades and still fear to see a xxNP in use, how I work around this problem is by exporting the bosses of the route, Bulk Administration > export and select from there.

  TAC will then need to get Root access to remove the xxNP (all) and then the upgrade will succeed.

  Once the upgrade is complete and you have installed the xxNP that you need then to export models of road again from the Server v10.x because you will need to change the header.txt stored in the .tar file. Copy "CCM: master - 10.5.1.11901 - 1.i386' 10.x export item and replace the one exporting 9.x."

  You can then import the 9.x CUCM CUCM 10.x road models

  Hope this helps,

  Richard

• I just need a tutorial step by step on how to move to the next upgrade, ex: 4.0 NOT to the newest one, thank you.

  I don't know where to go to get to the next level when the office is saying that the level I am sure will soon expire. Can I upgrade before its expiry, a new level NOT the newest one and how do I do it?

  Firefox 3.6 will probably be supported until April 2012. Firefox 4, 5, 6, 7 and 8 don't are not supported any longer, only 3.6.25 and 9.0.1.

• Pavilion 15-e010us: processor upgrade

  Hi all

  I would like to know more about whether or not I can upgrade my laptop to a higher level CPU. The manual that I dug up on the site of HP support is difficult to interpret so I thought it would be better to ask here. Thanks in advance!

  @ColeofTPG

  This is the best you can get for the socket you have.

  Processor AMD A10 - 5750M 2.50 GHz (turbo up to 3.50 GHz, 1600 MHz FSB, quad 4: 0 - MB L2 cache, DDR3, core, 35 W) 713548-001

  One you have the base frequency is 2.90 GHz and turbo is 3.50 GHz with 1 MB of L2 cache.

  AMD A6 - 5350M processor 2.90 GHz (turbo up to 3.50 GHz; 1600 MHz FSB, 1, 0 - MB L2 cache, DDR3, dual-core, 35 W) 713550-001

  http://www.CPU-upgrade.com/CPUs/AMD/A6-Series_for_Notebooks/A6-5350M.html

  Your manual here.

  http://h10032.www1.HP.com/CTG/manual/c03939658

  Look at page 25.

  REO

• CUCM NTP

  We have recently upgraded to CUCM 11.5. Time of his installation, our provider part a ntp server we do not. Once I found out, I gave him the correct IP address and he entered this one in. I asked him if we could remove the original that he came and he told me that if we did, we would have to re - authorize the server. All our phones are grabbing the time elapsed between the wrong server. It is true that I have to re-license it if I delete this first address?

  Hello

  with 11.5 you would be running PLM, there is no need to re - host licenses for changes in NTp. But before making any changes just NTP for the love of attention, delete the instance of PLM product and add the same.

  PLM explained below.

  https://supportforums.Cisco.com/document/12229791/understanding-Cisco-PR...

  JB

• CUCM 7.1 (3) TFTP Auth Fail

  Since the upgrade of CUCM 7.1.3.10000 - 11 all new phone plugged into the system gets an 'auth fail"from the TFTP server when you try to upgrade the firmware to the version that comes with 7.1 (3). Phones that were saved before the upgrade work fine. I see the same behanviour on our non-production environment, which is also in 7.1.3 - 10000-11.

  Firmware of the phone for a 7.1 (3) on the plateau of 7961G is SCCP41.8 - 5-2SR1S

  Someone at - sle seen this behavior before... did someone else turns 7.1 (3) yet?

  Hello world

  My problem was that the Firmware of the phone must first be 8.5.2 and after that, the phone can go to 8.5.3. What is written in the Relase Notes

  http://www.Cisco.com/en/us/docs/voice_ip_comm/cuipph/firmware/8_5_3/English/release/notes/7900_853.html

  Concerning

• Can I disable controls for level 2 privilege users?

  Hello

  I'm trying to set up some users with different privileges on 7505 router.

  I use the local aaa method on the 7505.

  I do not use a server RADIUS or GANYMEDE.

  I created some users with the privilege 15 and some with the privilege level 2 level but I want some users to have access only to the show command.

  The problem is that, if a level 2 to level 15 user activate password it may have full access. I want to disable the enable command 15 for all users of level 2 of privilege.

  Can I do this?

  Thank you

  Hello

  This works for other orders (I don't have cli to test right now), so it should work:

  Move the enable command to upgrade 3 or any other higher level you want:

  privilege exec level 3 select

• In an another (trusted) domain bij Agent ACS ACS authentication

  Hello

  I had two areas. Domain A is the top level domain. B is the child domain of the domain A.

  The ACS Agents are installed on two domain controllers in domain A.

  Authentication of clients in domain A is ok.

  Authentication of clients in domain B is a problem.

  I created a universal group in the field. In this universal group, I put a global group of users from the domain b. authentication not ok.

  The ACS "Journal of authentication failed": SAIS: "external DB account Restriction".

  What is the problem here?

  Gr.

  Remco

  Check if users are not mapped to a group of people with disabilities. Do not map several windows for ACS group groups. The following link can help you

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.0/user/guide/QG.html