CUCM 9.1.2 to 10.5 upgrade
Hi all
I tested reclassification CUCM 9.1.2 to 10.5 in my lab. As I read before, we need some COP files to download CUCM before the upgrade procedure.
Cisco has named this upgrade as
On my test, I do not download any file of the Conference of the parties before the upgrade. Uprade to version 10.5. Before upgrading my RHEL version was 5 (32-bit), and after the upgrade, it is 6(64 bit). After upgrade, everything seems ok, but upgrade took a long time, like 4 hours. During the upgrade, there is no link with CUCM and blue screen, I saw :) What is your opinion? This method works on the customer's environment? You test this procedure before? Best regards Mesut Hi Martin, I have never upgraded of CUCM 9 to 10 but made a migration of CUCM 7 to 9, which took nearly 7 hours for a single server. So, if you have two servers in a cluster, your time would be app.13 to 14 hours, which of course depends on your /configs DB. In addition, I was checking the upgrade path for the files of the Conference of the parties, but I have found no such requirement CDP file before the upgrade of CUCM 10 of 9.1.2 regds, Aman Tags: Cisco Support How EX90 ver 4.1 TC register CUCM 7.1.5? Does anyone kno how EX90 ver 4.1 TC register CUCM 7.1.5? CUCM 7.1.5 version cannot be upgraded, you can play this patch? Orthe EX 90 can be upgraded to version 7.1.5 CUCM management. Is there a perfect solution? Thank you Hello Zhang, The native for Ex90 recording medium and many other points of video endpoints began with CUCM 8.6 and later versions. Then you can try to register but will not be a native SIP registration. You can try the steps below to check. 1 create a SIP digest user and associate it with the third sip. 2. Add endpoint third-party SIP device (advance). 3. set the required field device pool, location, line (Partition & CSS), SIP profile, device security profile. If the above does not work, and if you are looking for just call aim you can navigate with the third SIP (BASIC). adittionaly check another thread related to your problem. https://supportforums.Cisco.com/thread/2083453 Thank you Alok Cisco Unified Communications Applications VMware Tools support I have an implementation of vsphere esxi 6.0U2. Who is the host VMware Tools 10.0.6. When the upgrade of all my UC apps (CUCM, CUC, IMP, UCCX *.. it's extraordinary... because it will not refresh), initially, they showed the VMware tools running and updated. But after a restart of the operating system of each. VMware Tools is no longer running... Anyone can comment/comment. doc-wiki such as: - http://docwiki.cisco.com/wiki/Virtualization_for_Cisco_Unified_Communica... - http://docwiki.cisco.com/wiki/Virtualization_for_Unified_CM_IM_and_Presence Indicate that they support ESXi 6.0 and so the tools is surely supported... All the comments of someone? Anyone else linking 6.0 U2 vSphere, ESXi and pushed its tools to their UC applications? Hi Michael, I go ahead and prosecute TAC that there are a number of bugs related to the VMware Tools upgrade to any version 10.0. This is a bug in level 2 of gravity; https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCux90747 Tools of Cisco first conjunction and multiple Clusters I'm on the underside of the UC Applications: CUCM - 10.5.2 I use the below first of Collaboration Tools to manage Deployment of privileged Collaboration - 10.5.1 I'm looking to install a different Cluster CUCM with connecting the unit and Cisco Unified presence running the version 11.X. I need to strengthen my first to more management tools later in order to manage the two clusters? Will it affect my 10.5.X apps if I do? CJ You will need 11 PC. x to pick up new support of CUCM 11.x. I would upgrade to the last PC which is 11.5 for APC and 11.2 of the CFP (although the CFP 11.5 released this month). 10.x apps will not notice the change. Follow-up will show the results of these clusters of 10/11 and PCP knows the difference between the settings and services on groups of 10/11. Concerning Problems of transfer/answering a call when using the headset with 79XX phone - CSCun26289 Hello Runing on CUCM 8.6.2 and preparing an upgrade to v9, we have recently updated our IP phone firmware. We use the 79xx series. We have updated the firmware to * SCCP41.9 - 3-1 SR 4 - 1 s * We are now facing a very strange problem that is referenced in the bug below. When you use the helmet our users cannot transfer an ongoing call or answer a call when ther is already active. There seems to be a fix in 1.0000 ES27 Does anyone know where this fixed version? https://Tools.Cisco.com/bugsearch/bug/CSCun26289 See you soon,. Olivier 9.4 (2) Firmware was released Friday. There is no release notes for this version, but in tests, it seems that the bug has been squashed. GTG Upgrade VM CUCM 8.6 to 10.5 Question My situation is slightly different from what is shown here. I have a client who has CUCM 8.6.2 on VM... & would like to upgrade to CUCM Ver 10.5. What is the steps & the route easier to do this upgrade? A bit confused, with messages because it is not a migration, but a simple upgrade in the virtual machine environment. Thank you Lee Hello You will need to download the utility to the cisco site license number. http://www.Cisco.com/c/en/us/support/unified-communications/unified-Comm... Run on PC whre Editor is reachable.the file would be a consiting of CUCM MAC address, IP address, csv file installed DLU, DLU used / Unnused DLUs, licenses of BASIC/Essential, UCL Enhanced, CUWL standard etc. Connection to the first License Manager, after having successfully migrated from 8 to 10 Use the following procedure to generate a licence application. regds, Aman Missing hash MD5 CUCM/CUC Upgrade OS on page I have been through several improvements CUCM and CUC but, at least one of them I noticed he had a hash MD5 Checksum of lack and white in CUCM BONES page just as I started the installation. I understand that if it does not match the checksum of when you downloaded from Cisco / PUT which is bad, but what happened when blank/lack just in the page of the OS? Thank you Dan Hi Dan,. If it is a upgrade file that has been downloaded from cisco.com you much download again trying to minimize the interference of the antivirus, vpn etc and see if the problem persists. I've seen a few cases of TAC where this scenario was known, but the upgrade went through and I don't see a bug for this as has been seen on different versions including 7.x. You can also open a TAC case to put the file published for you and try it. Manish Upgrade CUCM 10.5 and 11.5 with Mediasense, UCCX and confirmation of the highway Hello everyone, I'm looking to upgrade CUCM 10.5 to 11.5 and try to find out if the version of Mediasense, UCCX and highway are supported and to confirm with the experts that I am mistaken. Currently I have the following text: CUCM/CUC - 10.5 UCCX - 10.6.1 MediaSense - 11.0.1 Highway - 8.5.1 So based on the documentation below if I go to CUCM 11.5 UCCX must be upgraded to version 11 and highway be upgraded to 8.8? MediaSense is ok here its version 11? http://www.Cisco.com/c/dam/en/us/TD/docs/voice_ip_comm/uc_system/unified... Thank you Dan ORC evolving documents now States that UCCX 10.6 (1) can be compatible with 11.5 (1) CUCM (plus all patches) after you install the ciscouccx.106x.cucm11xcompatible.14.cop.sgn hotfix. http://www.Cisco.com/Web/software/280840578/114618/Readme-UCCX-1061-UCCX... -Alex CUCM upgrade failed - migration 8.6 SU4 (2A) to 10.5 (2) SU1 Hello friends, I'm trying to migrate SU4 Cucm 8.6 (2A) to 10.5 (2) SU1. I did like the exception pre-upgrade tasks. Changing vNIC, vCPU and taste-> rdht6 - 64 bit + resizing disks. upgrade iso file loaded successfully. Shortly after that the upgrade of cooling process in installation of position on the part of the installation of database component the process stopped at the 83 percent and performs reset. That said the logs on the upgrade? If he fails to step of the DB, it's usually something related to the info that is in the DB causing problems, but you must look at the newspapers. And FYI, migrate means you either with PCD or move to a new piece of HW, is that what you do? If this isn't the case, then you are just the upgrade. Upgrade of CUCM CUCM 9.1.2 7.1.5 We have CUCM 7.1.5 server cluster four on hardware servers. Recently, we have planned to spend this cluster in CUCM 9.1 on VMWare. If we install CUCM 9.1 on VMs and make necessary configuration, can we obtain the required Cisco license? We have UCS for this cluster CUCM We do not anticipate making Linux-to-Linux updated because we need some configuration changes in the new cluster CUCM. So our plan is to do a fresh install of CUCM 9.1 on VMs and migrate exsisting license for it. can someone explain how we should get a license for the new version and what will be needed for this? Thank you I did the same upgrade path. After opening a case on [email protected] / * /, they will tell you to use a tool called the number of licenses of Cisco utility that will generate a report. So you send this report to Cisco and that they convert the existing licenses to be used on ELM. You can check the process on the attached PPT. While I intend to improve CUCM from 9 to 10, understand that I need to generate the v9 ELM licence application and send to Cisco to generate the v10 license key. Would like to confirm the license generate demand can be performed on CUCM v9 ELM before moving on to v10 PLM. Your inputs are appreciated! Roy Hi Roy, It is not so with CUCM9. After u upgrade to CUCM 9, you must share the generated CUCM9 file so that you can obtain the permanent license file. You need to share the file LCU before migrating to CUCM9. This file contacted PUB CUCM 7/8 to get the number of users of BASIC/Essential/CUWL Std. regds, Aman CUCM upgrade 9.1.2.10000 - 28 9.1.2.11900 - 12 Unrestricted access Hello I'm trying to upgrade CUCM 9.1.2.10000 - 28 cluster cluster 9.1.2.11900 - 12. I managed with 2 servers (Editor & subscribers). Let me tell you the total number of nodes in my cluster. It is a 4-node cluster, where I intend to use as a TFTP server 1 server. All others are engaged for the processing of appeals. 2 sites. Site A and B. Site A has CUCM editor and the 1 subscriber who are already upgraded to the unlimited version of 9.1.2.11900 - 12. Site B has 2 subscribers where one of them will be used as the TFTP server and the other will be for Site A disaster recovery. Site A to Site B round delay is about 80ms. I updated to Site A CUCM servers. But it's a continuous failure to Site B. I downloaded the Setup log down below. Please help me to solve this problem as soon as possible. Thanks in advance, M. Hi MR In the log file you attached, I can see the following: 13/06/2014-14:57:37 component_install | (CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub DEBUG: ontape backup [ccm9_1_2_10000_28] db file a boxed version of local [ccm9_1_2_11900_12] |
Check the media are the copy more properly to the Subscriber by checking the MD5 hash is correct, if they are correct, then you will need upgrade Publisher again and try the upgrade of this Subscriber. Kind regards Richard RTMT CFS alert critical after upgrade to 7.1.5.34900 - 7 CUCM I just upgraded our CUCM 11 Server 7.1.3 to CUCM 7.1.5.34900 cluster - 7, which was on the whole successful However, I am now regularly get an alert every hour about RTMT associated with CSA (see text below). Each alert always coming from the editor and returns to the other servers in the cluster, but not necessarily the same server. I restarted the publication server, which made no difference. As far as I know, there is no impact, it's just a little embarrassing to see the alerts are displayed. Has anyone seen something similar? I'll happily re - start the entire cluster once more if I thought it might solve the problem, but our process of internal change to a server re-boot is a pain I want to avoid! dec 17 15:35:43 CUCM-PUB local4 02:28: CUCM-PUB: December 17, 2012 15:35:43.429 + 0000: % CSA-2-EVENT_CLIM_DENY: % [PID = 4325] [component = CiscoSecurityAgent]: the process of ' / usr/local/platform/bin/clm/clm ' (as user root (0) root group (0)) tries to establish a TCP connection with 10.10.10.12 on port 8500 and exceeded the limit of the specific rate of 100 connections in 1 minutes. The operation was refused. [rule 2050] Concerning Kelvin Hi Kelvin You can try restarting the Cluster Manager service for some your nodes for which you found alarms. To restart the Cluster service manager use the following command: Restarting the service Cluster Manager utils Concerning Aditya Gupta Upgrade of CUCM 7.1.5 to 9.1 (contract No. UCS and ESW) Hello We have CUCM 7.1.5 cluster (two servers) without contract UCS and ESW. What would be the better and way cheaper to upgrade to CUCM 9.1. We intend to use our VMWare system and only buy the CUCM 9.1 software (not servers). The current DLU is trensfered or should we buy everything from scratch. Kind regards. Demont - my friend, how have you been? I hope you do well! Very nice to see you always help others - keep it! (+ 5) Kasper, As my friend that Demont said accurately, you contact your partner Cisco Channel/Account Manager. I just wanted to add, you can migrate DLU, but like with CUCM9, you have only UCL or CUWL - according to the type of license you select UCL/CUWL, you will need to purchase additional licenses and buy the UCS. But having said that you can benefit from Cisco in the car at 9 and can buy this at a really discounted price. Your Cisco representative can explain all the options in detail. Thank you Terry Upgrade domain CUCM 8.6.2 level Hello We lack a level of Windows 2008 domain at the moment with CUCM 8.6.2 and LDAP synchronization. We would like to upgrade to domainlevel 2008R2. I don't think that this will cause no problems because I'm under 2008R2 in my lab too, but just to be sure that this will have an impact on a lot of phones. There may be potential problems? Everything I need to know, or just a simple upgrade, which would have no impact on the CUCM? Thank you for a short answer concerning Marc Hello Switching the domain functional level upwards or a forest will have no effect on the integration of LDAP. Concerning Aaron How can I get my product key because I can't activate windows I can't send text SMS messages Anyone with texting trouble to phones do not use iMessage? I have an iPhone all nine 6s and can only text using iMessage. I tried everything suggested on the help page and even wiped out my phone and nothing works. Help! I have 20 virses and Trojan horses on my desk, I think my computer has ceased to them that I don't know what to do Samsung BD Player reports HTTP port is disabled. As the subject says, I hung a Samsung BD player on a BEFSR41 router. The router has the current version of the firmware. When I run the test connection to the player, the local connection is good but the Internet connection fails and the message is " Pavilion dv7 WC159EA #ABU: the fan RPM increases a lot whenever I plug my battery I recently bought a new battery for my laptop and when I plug it, while my charger is plugged, the fan THAT RPM increases as if I use 100% CPU at 100% of RAM. Could it be caused by the new battery? I have a hp dv7-3111ea and bought this battery http:Similar Questions
VMware Tools upgrade fails due to various Selinux denials. VI-Client status of tools like is not running, not installed.
CUC - 10.5.1
REB - 10.0.2
UCCX - 10.5.1
CUPS - 10.5.2
Insurance of Collaboration - 10.5.0
First supply of Collaboration - 10.5.0
First Manager of licenses - 10.0.1
1. connect to first Cisco Manager of licenses.
2 in the license > Fulfillment page, select generate license request in the drop-down under
Other treatment Options.
3. the license request window and next steps appear. Copy the selected text in your Clipboard or click
Save it in a file on your PC and send it to [email protected] / * / to obtain the permanent license.
13/06/2014-14:57:37 component_install | (CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub DEBUG: * |
13/06/2014-14:57:37 component_install | (CAPTURE).
13/06/2014-14:57:37 component_install | (CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub DEBUG: ontape_backup from the pub is a different version of the one running on the Subscriber .
13/06/2014-14:57:37 component_install | (CAPTURE).
13/06/2014-14:57:37 component_install | (CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub DEBUG: reupgrade please advertising, it will regenerate the proper backup of the version of the Subscriber is to be upgraded in to |
13/06/2014-14:57:37 component_install | (CAPTURE).
13/06/2014-14:57:37 component_install | (CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub DEBUG: installation will fail now |
13/06/2014-14:57:37 component_install | (CAPTURE).
13/06/2014-14:57:37 component_install | (CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub DEBUG: * |Maybe you are looking for