Upgrade of Synaptics

Similar Questions

• HP Envy X 2 touch screen not responding do not when waking from sleep

  About half of the time when I wake up my HP envy X 2 version sleep 128 GB touchscreen is unresponsive. The mouse pad and the keyboard usually work but screen tousch work again until it is restarted.

  I took a peek in the Device Manager, while the touch screen did not work and I don't see under User Interface devices, I have a HID I2C device that has a yellow warning sign. When I open it under device status, it says "Windows has stopped this device because it has reported problems. (Code 43) »

  Someone at - it information on how to solve this problem?

  I had already tried to upgrade the Synaptics drivers and it does not solve the problem.

  I noticed several times that when I wake the PC from sleep that Google Talk would be stuck with about 40% of the use of processer according to the Task Manager. I usually just close and re - open Google talk and he would not stuck using the processor.

  A couple of days ago I closed Google Talk and did not restart the program, during the last 2 days I didn't only once when the touch screen has been non-responsive after waking up from his sleep.

  I've said before, but I had a similar problem with the rotation sensor, after waking up from his sleep, he would be intermittenetly does not work and I could also see in Device Manager that another I2C HID device was a code 43 error. Also since the closing of google talk, I didn't freeze the rotation sensor.

  Like I said its only been a couple of days, so it can always happen, but 2 days is the longest I can remember never go without this problem.

  mfhengst, you have google talk installed on your laptop?

• Pavilion Notebook M1Y13UA #ABL: clickpad does not respond immediately when you tapoterez

  Hello

  I have constant problems with the clickpad installed on my laptop. I can say that it is the touchpad/clickpad WORSE I've EVER had. It has been repaired twice by HP under my warranty coverage. First of all, they have changed a few son/cables inside and completely uninstalled Windows 10; Then, because the problems were still present, they installed a new clickpad, which changed the hardware. Some issues have been resolved, but others continue to be present.

  At this point, I'm trying to any parameters used for the clickpad, via settings-> devices-> mouse and touchpad-> properties of the mouse-> settings-> properties for Synaptics ClickPad ClickPad, very often, but not always, the clickpad is not responding when I type the first time after that I was doing something else. When I type the second or third time, I'm finally starting to get answers. In other words, whenever I type somewhere - to close a window, to follow a hyperlink, to place the cursor in a text, to select a part of a text, etc. - my first tap does NOTHING. I must repeat my cock at least once more before there is a response. I can type very gently or hard, it doesn't matter. It applies both to pressure alone to double tap. It is the same for the two fingers tapping.

  Pointing-> sensitivity feature is at its maximum. (If I reduce, the clickpad becomes even more that don't meet liked). Smart Sense functionality is almost extinct. (If I put it near Max, nothing changes.) Filter activation time option, which apparently blocks the clickpad for a certain period of time after you type, is zero. For the feature settings-> devices-> mouse and touchpad-> Touchpad (to help prevent the cursor to move accidentally while you type, change the time before work clicks)-> without delay. Turning or turn off of the button (on the clickpad) doesn't change anything. Clicks properly. All the drivers are up to date. All Windows 10 operating system up-to-date. When I attach my USB mouse, the mouse works fine, there is no delay in responses.

  I assumed that contacting HP for the third time will be not successful. Anyone have the same problem? If so, how to solve it? Other users seem to have had a similar problem (http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Synaptics-Clickpad-Smartsense-M... but not found a solution.)

  Thank you very much in advance!

  I think that I recently found a solution (a partial solution at least) for this problem. The root of the problem seems to be the drivers supplied by Microsoft. The pilots, even new ones, for this clickpad are just horrible.

  What is worse, updates to these useless drivers are installed in my system without any agreement from me either. Try to avoid updates, using a Microsoft program (https://support.microsoft.com/en-us/kb/3073930 ), doesn't help - for the clickpad updates are installed in any case.

  What I did to make my clickpad works much better is the following:

  1. Download a driver directly from the author of the clickpad, Synaptics (http://www.synaptics.com/resources). For my camera, I used "Windows 10 I2C v19.0.19.1 devices". Do not install the driver again, your system will you not allow to do so due to a 'new' version of the driver 'already installed '.
  2. Disable automatic updates of your operating system, using the Protocol according to (http://www.thewindowsclub.com/turn-off-windows-update-in-windows-10). This change is not permanent, you can always activate the automatic system updates, if you wish. Of course, if you enable automatic updates, Microsoft crap drivers will be installed automatically too, deletion of all other good drivers you have installed previously.
  3. Completely uninstall the driver automatically installed for the clickpad using Device Manager (you can advance this Manager by right-clicking the Start button). Restart the computer, as required in a message box.
  4. Install the driver previously downloaded from Synaptics. In my case, I don't have to install manually, my system installed this driver 'default', without doubt, as the only available driver for clickpad on my hard drive.

  Here are the steps that I have lived to correct the problem. Now my clickpad is not as frustrating as it used to be. Make sure when you try these steps, they may not work in your particular case, because your computer might have a few important differences from my camera.

• HP split 13 X 2-mouse / Touchpad FREEZES

  I just bought the HP 13 X 2 Split and in the first time I started to make the experience of the mouse freezes all the time.

  When I go into Device Manager, I see a exclamation mark on two different hardware, not both at the same time, it keeps alternating between Touchpad (error 43 cod3) and also on Intel USB 3.0 eXtensible Host Controller.

  Both say that a device malfunction filed windows to stop the machine and he said: this is the problem driver or physical problem, the thing is that I've updated every single driver this laptop of HP Support Assistant, including the wireless mouse, bios, everything... I've updated to Windows 8.1... I've updated the drivers from the Intel/Synaptic Web site, I tried all updates and none of them worked, the issue still multibordure every time.

  I can get the touchpad working again if I restart the computer, or if I remove the device and then ask windows to find new hardware, or sometimes if I deactivate and reactivate. But sometimes the only way to restart the computer.

  Is my product number: E8C34UA #ABA

  Product name: HP Split 13 X 2 PC

  In addition, I did a recovery of the plant using HP to see recovery it freezes again, just to confirm if it was the drivers of modernization that caused, and it doesn't occur, but less often, and after I did the recovery (can not cancel the update of the bios) I can't upgrade the Synaptics TouchPad of HP Support Assistant driver , it downlaods and it fails when it tries to install, but it gives no detailed error, says she didn't.

  Any help before I return this unit?

  Please... I really liked the computer, but I can't keep it without the mouse works correctly.

  Thanks for any help.

  Leo

  FIX OF A PROBLEM

  Just to let you know all that I was sure that the whole problem, it wasn't driver or any type of configuration that was leading my touchpad, ssd, usb, audio and hdmi for defective.

  I experienced the problem in the first week, I bought this laptop, but because I live in the Brazil and I'll usually once a year to visit the USA I couldn't use the guarantee to maintain the product for a few weeks.

  That I decided to buy two Digital connectors and to open up the laptop. I tried to find on HP Store these parts, but they were not available there, so, I went to eBay and bought two pieces.

  First, I opened the dockstation (it was easier), but the problem persists, then I opened the laptop itself and replaced the conector original with a new all my problems went away<>

  My HDMI not working, my right USB just worked with a gadget 2.0 in this regard, the touchpad couldn't have more than a few minutes without giving me the "device failed - code 43 descriptor" on windows, and now everything works perfectly as it is supposed to work.

  If someone wants to give this photo of a trial, the part number of the material that I replaced was:

  36888-001 48.41l04.011 HP DOCKING CONNECTOR CARD W / CABLE SPLIT 13 - G 13-G110DX

  If someone needs more details, you can send me a message and I can help, I almost threw the phone on the wall once and I can image the frustration to have it malfunction all the time.

• Satellite L855-149 - Synaptics touchpad does not work after upgrade to win 8

  I Hare recently upgradedmy Toshiba Satellite L855-149 to the most recent version of windows 8 6.2 and since I did then the Synaptics touch pad stopped working, I guess because the driver does not work with this version of windows 8. What can I do to fix this so I can use my computer without a plug in the mouse again?

  Thank you
  Simon

  Thanks for your comments!

• Pavilion dv7 6166-nr: Synaptics TouchPad Enable/Disable light not working after upgrade to Windows 10

  TECHNICAL DATA:

  Name of the operating system Microsoft Windows 10 home
  Version 10.0.10240 Build 10240
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  System name SUZANNES-PC
  System manufacturer Hewlett-Packard
  System model HP Pavilion dv7 Notebook PC
  System Type x 64-based PC
  SKU LW473UA #ABA system
  Processor AMD A4 - 3300M APU with 2 logical processors, 2 Lossnay, 1900 Mhz, graphics HD Radeon (TM)
  Hewlett-Packard Version / Date BIOS F.21, 13/09/2011
  SMBIOS Version 2.7
  Embedded Controller Version 51,24 by action
  BIOS Legacy Mode
  Baseboard manufacturer Hewlett-Packard
  Model baseboard is not available
  Name of plinth base
  Role Mobile platform
  State of secure boot not supported
  PCR7 Configuration binding is not Possible
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "10.0.10240.16392".
  SUZANNES-PC\Suzanne username
  Daylight saving time from the centre of zone
  Physical memory (RAM) installed 4.00 GB
  3.48 GB total physical memory
  2.03 GB available physical memory
  4.79 GB total virtual memory
  3.26 GB available virtual memory
  Page file space 1.31 GB
  Paging file C:\pagefile.sys
  Hyper-V - VM monitor Mode Extensions Yes
  Hyper-V - second level address translation Extensions Yes
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  NEWS OF SYNAPTICS:

  Material Type Synaptics TouchPad SMBus
  Number buttons 0
  Status OK
  ACPI\SYN1E46\4 PNP device ID & 71B2F2C & 0
  Supported no power management
  Double-click the threshold is not available
  Handedness is not available
  IRQ channel, IRQ 12
  Driver c:\windows\system32\drivers\i8042prt.sys (10.0.10240.16384, 112.00 KB (114 688 bytes), 22:20 09/07/2015)

  PROBLEM:

  The TouchPad works but the light that is usually lit when the touchpad is turned on/off (white/orange) does not work.  I was wondering if there is a way to fix this, or there's someone else with this problem.

  OK, this can be marked RESOLVED.

  I searched and found an older post with the solution by holding down the FN key and pressing the space bar. The fire came as soon as I did it. Go figure!

• Cannot open the synaptics pointing device in windows vista, upgrades are far but message error, unable to connect to the synaptics pointing device

  Hi I have a problem with my mouse/pointer when I click on the mouse to open it I have error message unable to connect to the synaptics pointing device. Have you checked the updates that are up-to-date, and the driver is ok, not sure what to try next need to make any changes to the mouse pointer

  with Brice thanks.

  Hi paiyay,

  Thanks for posting in the Microsoft Community.

  I understand that you are unable to open the synaptics pointing device in windows vista

  · You did changes to the computer before the show?

  · What happens when you click the Yes button in the error message?

  · You are able to use the mouse on the system?

  I suggest you uninstall the software from programs and features and then try to open the properties of the mouse and check if you are able to open the mouse properties then I would you recommend to uninstall the drivers that are installed on the system in the Device Manager and then download the drivers from the link below and check if the problem is resolved.

  http://www.Synaptics.com/support/drivers

  http://www.Synaptics.com/resources/drivers

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Connect the hard disk, and then try running the fix tool of the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  I suggest you to contact the mouse manufacturer for assistance. Click on the link below.

  http://www.Synaptics.com/

  See also:

  FAQ and troubleshooting

  http://www.Synaptics.com/resources/consumer-tips

• Windows 7 Upgrade Guide for dv6000/dv9000 models

  Statement:

  You use this guide at your own risk. I take no responsibility for any problem.

  Things you need to know and do before the upgrade:

  1 HP may require that reinstall you Vista back if you have hardware problems to solve the.

  2 HP will not help you if you have software problems because these models are not officially supported

  with Windows 7.

  3. before you upgrade to Windows 7 will make it please Vista Recovery CD/DVD. How all the information here.

  4. all drivers Vista and software preinstalled by HP for your model are in the folder in C:\swsetup .

  If you still have on your HARD drive, then copy this folder on a CD/DVD. You may need them one day.

  5 users with nVidia graphics card should check the temperature of this device before upgrading.

  In this way you will know is it works fine under Windows 7 also.

  How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?

  To do this use HWMonitor (free and recommended) or Aida64.

  How do you know what model you have and the specifications for it:

  1. click on the Support & drivers link. (The upper part of this page).

  2. in the search box, type your computer laptop product (p/n) number.

  Resources:

  How to locate the laptop n/p

  3. under a portable computer image, you will find the name of your laptop model (example: HP Pavilion dv6205eu notebook PC).

  4. on the same page, click on Product Information -> specifications and you will find all the information on

  your little laptop.

  How to install Windows 7 and what you need to know during the upgrade:

  1 guide: How to do a clean Windows 7 install

  2. all drivers for Windows 7, you will find in the next post below.

  3. some drivers have comment while they are initially made for Vista system.

  During normal installation will fail, and then try to run the file unsuccessfully installed in Compatibility Mode (Windows Vista,

  Windows Vista Service Pack 1 and Windows Vista Service Pack 2).

  Resources:

  Make older programs in this version of Windows

  How to run a program in Compatibility Mode in Windows 7

  CHIPSET DRIVERS

  Solution on COPROCESSOR with yellow exclamation mark () 

  If you have Intel processor:

  Intel chipset (Install and reboot before other drivers) here (version 9.1.1.1025 for 32/64-bit Win7)

  Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64-bit Win7) 

  If you have an AMD processor:

  For models dv60xx, dv61xx, dv62xx, dv63xx, dv64xx, dv90xx, dv91xx, dv92xx, dv93xx and dv94xx (example: dv6367am means that your model is dvx3xx, dv9421xw means that your model is dv94xx):

  nVidia Chipset (Install and reboot before other drivers) here (Vista)

  For models dv65xx, dv66xx, dv67xx, dv68xx, dv69xx, dv95xx, dv96xx, dv97xx, dv98xx and dv99xx (example: dv6981tu means that your model is dv69xx, dv9721tu means that your model is dv97xx):

  nVidia Chipset (Install and reboot before other drivers) here   (Vista) 

  Important information for users with nVidia chipset!

  If you have 4 GB RAM or more, then read the article Microsoft Knowledge base on the solution of certain problems that you may have here.

  GRAPHICS DRIVERS

  Intel graphics:

  Inte l 950 and Intel X 3100 here (version 15.12.75.4.1930 for Win7 32 bit) or here (version 15.12.75.4.1930 for Win7 64 bit)

  nVidia Chart: 

  Important information!

  If you have installed all the drivers for graphics card nVidia, then until you install the other version will be

  you will first need to remove the old drivers. Check below how guide (that there is no standard uninstaller

  ( process):

  How to remove drivers Windows system nVidia graphics.

  Drivers:

  nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS:

  OPTION 1
  

  267.76 version here for Windows 7 32 bit or here for Windows 7 64-bit.

  OPTION 2

  Version 197.16 here for Windows 7 32 bit or here for Windows 7 64-bit.

  Note:

  Don't forget to first uninstall previous graphics driver.

  nVidia GeForce GO 6150 M, 7150 M, 7200 M, 7400 M or M 7600:

  OPTION 1

  First try installing the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  OPTION 2
  

  If the drivers will not work so try modded drivers worm 195.81.

  Note:

  Don't forget to first uninstall previous graphics driver.

  How to install Windows 7?

  1. download driver here (for 32-bit Win7) or here (for Win7 64 bit) double click and select extract,

  2 download from this site with the drivers also modified INF and replace original INF in extracted folder,.

  3 install and reboot.

  OPTION 3

  Last thing you can do is install graphic driver from Windows Update.

  Note:

  Don't forget to first uninstall previous graphics driver.

  1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

  Windows Update '.

  2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

  for your computer.

  3select the " optional updates " and install from there only driver for your graphics card.

  AUDIO DRIVERS

  Conexant HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  Realtek HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  If the Vista drivers won't work well for you then try to use Realtek official a of here (32/64 bit Win7).

  "" When you enter this link check it 'I accept the foregoing." and after that click on the " Next " button.

  MODEM DRIVERS

  Conexant Modem here (A worm 7.61.0.0) (Vista) - If you have the sound card Conexant

  Motorola SM56 modem here (ver6.12.6.0 A) (Vista) - If you have the Realtek audio card

  HP QUICK PLAY 

  HP QuickPlay here (ver 3.7 v.6112 for 32/64-bit Win7)

  Notes:

  • It must be installed before HP Quick Launch Buttons.
  
  
  • You have installed this software and it crashes when you use?

  Uninstall your current version of HP QUICK PLAY and install what you had in Vista.

  Resources:

  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  If you've burned CD/DVD with C:\swsetup folder as proposed in the guide then you will find it.

  HP Quick Launch buttons

  Solution on KEYBOARD FILTER with yellow exclamation mark ()  

  HP Quick Launch buttons here (ver 6.50.13.1 for 32/64-bit Win7)

  WIRELESS DRIVERS

  Intel Wireless here (ver 13.0.0.107 for 32/64-bit Win7)

  Broadcom wireless here (ver 5.60.48.35 for 32/64-bit Win7)

  Atheros Wireless here (ver 8.0.0.316 for 32/64-bit Win7)

  HP wireless Assistant here (ver 3.50.12.1 for 32/64-bit Win7)

  Bluetooth wireless here (ver 6.5.0.2000 for 32/64-bit Win7) only for models with Bluetooth.

  Note:

  How to install the Bluetooth driver?

  Click on the link below:

  How to install the driver Bluetooth HP Windows 7.

  ETHERNET DRIVERS

  LAN Realtek RTL8101 here (for 32/64-bit Win7) only for models with Intel processor.

  Models with AMD processors need not install any additional Ethernet file, because the drivers for it are in the chipset package.

  CARD READER

  Solution on BASE SYSTEM DEVICE with yellow exclamation mark () 

  Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)

  TOUCHPAD DRIVER

  Synaptics TouchPad here (ver 16.0.1.0 for 32/64-bit Win7)

  Note:

  Default is activated the scroll two - finger. If you want to use only one finger to scroll, check out the link below:

  How to change two - finger scrolling on One - Finger scrolling in Synaptics TouchPad software.

  ONLY IF YOUR MODEL: WEBCAM 

  CyberLink YouCam here (ver 2.0.3115 for 32/64-bit Win7)

  Note:

  If you have a problem with your webcam, check below links to HP documents:

  Solve Webcam Windows problems

  Test a Webcam using your favorite Instant Messaging

  3VRX (optional software)
  

  on the screen the images and associated sounds that are displayed and heard when volume control

  3VRX here (version 2.5 for 32/64-bit Win7)

  Note:

  Here is YouTube video that shows what you can do with this software.

  ONLY IF YOUR MODEL HAS: FINGERPRINTS READER
  

  1. uninstall all software and previous fingerprint reader drivers

  Check below how guide (only it's non-standard uninstall process):

  How do I uninstall the driver and the AuthenTec fingerprint software

  2 you can install now correct fingeprint reader driver and software.

  There are two apps that are available on this device:

  - AuthenTec TrueSuite

  and

  -DigitalPersona Personal (recommended).

  Information on how to install the software you will find below guides:

  AuthenTec TrueSuite, fingerprint AuthenTec and Windows 7

  DigitalPersona Personal fingerprint AuthenTec and Windows 7

  ONLY IF YOUR MODEL: DVD PLAYER WITH LIGHTSCRIBE

  How can you check is your DVD with Lightscribe drive?

  The Panel of DVD, there will be a Lightscribe logo.

  

  LightScribe Host software [Link removed - Site is no longer available] (worm 1.18.22.2 for 32/64-bit Win7)

  Report of the changes that have been made in the guide

  Edited the 16/01/2010 updated Synaptics TouchPad driver to ver 14.0.3.1, update Broadcom driver to ver 5.60.18.41

  Edited the 18/01/2010 updated nVidia Graphic article. Adding drivers for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (version 195.62)

  Published the 19/01/2010 updated LightScribe software 1.18.10.2 worm host

  Edited drivers fingerprints of 02/05/2010 update, software and added guides to fingerprints.

  Published the 2010-02-27 updated LightScribe Host at worm 1.18.11.1 software

  Published the 03/03/2010 update HP Quick Launch Buttons to worm 6.50.13.1

  Published the 03/20/2010 updated Synaptics TouchPad to worm 15.0.9.0 (this version allows multitouch gestures)

  Published two guides added 21/03/2010. How to remove drivers Windows system nVidia graphics and how to install the HP Bluetooth driver in

  Windows 7.

  Published the 03/25/2010 updated LightScribe Host at worm 1.18.12.1 software

  Changed name Intel Matrix Storage Manager published 26/03/2010 to the Intel Rapid Storage Technology technology, has added Intel Rapid Storage Technology

  worm 9.6.0.1014

  Published on 31/03/2010 update nVidia graphics with uninstall guide section, updated drivers for nVidia GeForce 8400 M GS and 8600 M GS

  worm 197.16

  Published the 04/10/2010 updated LightScribe Host at worm 1.18.13.1 software

  Published the 05/04/2010 updated LightScribe Host at worm 1.18.14.1 software

  Published the 05/05/2010 updated Synaptics TouchPad driver to ver 15.0.13.0, updated HP QuickPlay for ver 3.7 v.6112

  Published 21/05/2010 Update for ver 5.60.48.35 Bradcom, Atheros wireless to worm 8.0.0.316 update, update Synaptics touchpad wireless

  15.0.13.3 worm

  Edited the 24/05/2010 update HP Wireless Assistant to worm 3.50.11.2

  Edited the 24/06/2010 updated Synaptics TouchPad to worm 15.0.17.4

  Published 30/07/2010 update Broadcom wireless - the same version but with a few improvements, HP Wireless Assistant updated to ver 3.50.12.1

  Added drivers published 04/01/2011 for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (ver. 267.76)

  Published the 04/02/2011 update software LightScribe Host at worm 1.18.22.2, added a guide: how to change two - finger scrolling on One - Finger

  Scrolling in Synaptics TouchPad software.

  Published driver update 12/14/2011 for technology Intel® Rapid Storage Technology

  Published 05/07/2012 updated driver for HP Bluetooth worm 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, updated guide: how to install

  Driver HP Bluetooth Windows 7

• Qosmio F60 - no additional touchpad and function Fn after Win 8 upgrade

  I have recently installed Windows 8 on my Qosmio F60 and now I have a few questions, I think it might be related driver but not sure what drivers in particular.

  1. the touchpad still works to move the pointer but sliding along the right edge does not scroll more, I had a look on the Web page of drivers but can not find the driver I need to install to make it work. Also, anyone know if there is a driver Windows 8 so that I can drag the edge to bring up the charms and the tabs?

  2. the FN keys no longer work, so I can't control the brightness or other features along the top row of the keyboard.

  If anyone can help with or the other of these questions would be great.

  Thank you
  Phillip

  Hello

  As you can see that there is no special driver to win 8 BOF series Qosmio F60.
  This isn't win 8 supported.
  However, I think that you should be able to use the upgrade drivers to win 8 published for Qosmio F750.
  Try it.

  Recommend that you install the driver for the touchpad (from Synaptics), the utility of the feature key Toshiba value added package and system of Toshiba driver

• ENVY 15-AH151sa: how to uninstall and reinstall my Synaptics TouchPad of SMBus driver?

  When you try to solve a problem on my new PC BSOD * [towards the end of the installation of Office365], I had to fix this serigraph in my thread in the Microsoft Community:

  

  He was not related to my problem, but the moderator noted that

  "In the first snip accidents are related to your pavement.  By removing completely and then reinstall this driver should help. »

  How to do this please - assuming you agree, of course.

  Alyssa in your Live Chat team was brilliant - how can I give feedback?

  New Envy 15-AH151sa
  More old Compaq Presario CQ71-320SA screwed up by free upgrade from Microsoft of Win7 for Win10

  Download and save the last driver Synaptics your Support page. Then go to control panel, programs and features and uninstall the laptop Synaptics.Restart and double-click on the downloaded file to install it.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-15-AH100-notebook-PC/8499284/model/8942971#Z7_3054ICK0K8UDA0AQC11TA930O2

• The touchpad scrolling does not work after upgrade to Windows 10

  Hello world

  I used everything on my laptop Satellite uninstalled and reinstalled Windows 10.

  Now, toshiba applications disappeared.
  This isn't my problem.

  My problem is that on my touchpad scrolling is not working.
  Synaptics is gone and when I try to install a new driver (Touch Pad driver) it gives an error after installation.

  Synaptics is installed accept for the uttilities mouch.

  Someone can help me.

  Greetings, Jiska

  I don't know what model of laptop you have, but it turns out that not all series of phones are supported to win 10 upgrade.
  In this case Win 10 drivers will not be released on such unit...

  The touchpad scrolling requires additional touchpad driver...
  If your device supports Synaptics touchpad, you can also use the driver for the Synaptics driver page:
  http://www.Synaptics.com/en/drivers.php

  But currently driver to Win 10 is not available... you can try to install and to use the Win 8.1 driver but I'm not sure if it will work properly...

• Satellite Z930 - no more Bluetooth after upgrade to 8.1 Windows

  Hello

  After upgrade to Windows 8.1 of the Windows store, I discovered that my Bluetooth printer
  has disappeared. Looking at the wireless settings, no more option to turn on/off Bluetooth.
  How can I return my Bluetooth?

  If you updated the system of Windows 8 Windows 8.1 you must update the drivers too!

  You will find on the page of the Toshiba UE Windows Update 8.1 driver drivers
  There is also a statement of installation containing the installation order.

  1 Intel Wireless display uninstall
  2 uninstall Intel Proset
  3 Realtek Audio Driver uninstall
  Day 4 windows 8.1
  5 TOSHIBA Assist Desktop Upgrade
  6 Intel Display Driver upgrade
  AMD 7 Display Driver upgrade
  8 Intel Rapid Storage Technology driver upgrade
  Update driver Audio Realtek 9
  Update 10 ALPS Pointing Device Driver
  Upgrade of 11 Synaptics Touch Pad Driver
  12 Atheros Wireless LAN Driver upgrade
  13 Intel PROSet/Wireless WiMAX software update
  14 Ericsson 3 G driver upgrade
  TOSHIBA 15 system upgrade driver
  Upgrade of 16 TOSHIBA Service Station
  TOSHIBA 17 function key upgrade
  18 TOSHIBA eco Utility v2 upgrade
  19 TOSHIBA Fingerprint Utility upgrade
  TFPU 20 WBF deleting fingerprints tool upgrade
  21 TOSHIBA PC Health Monitor Upgrade
  22 TOSHIBA VIDEO PLAYER Upgrade
  23 CyberLink MediaShow 6 to upgrade TOSHIBA
  24 TOSHIBA Media Player by TrueLink + Upgrade sMedio
  25 TOSHIBA resolution + plug-in for Windows Media Player upgrade
  26 TOSHIBA HDD Protection upgrade

• Satellite Pro A300 PSAG9E - Win 8 upgrade questions

  I decided to update my old Toshiba Satellite Pro A300 PSAG9E-00700TTE Vista to Windows 8.

  After two tries he has been successful. Vista made me mad, and when I decided to give my son, I wanted to work better.

  Toshiba doesn't seem to be willing to support the old models. (over 3 years).

  I can not even find this model code in the lists, the site does not seem to recognize the serial number.

  This is why all the Windows 8 upgrade tools provided are not relevant.

  I met a few minor problems before, but the Toshiba Turkey never replied messages, even those concerning the new products when I considered buying a new laptop. In the end I went for an Asus, which exceeds my expectations.

  I don't expect all support this time either, because of past experience. But I still want to try one last time.

  Is there a way to get the material in this workbook in Windows 8?

  > Is there a way to get the material in this workbook in Windows 8?

  Satellite Pro A300 is not that win 8 supported means that you will not find to win 8 drivers for this series, but of course, you can use Win 8 on this unit.

  In some cases, the municipality of Win 7 drivers would be compatible.

  Toshiba tools like VAP (value added package) to win 8 can also be used, but we must look for a Win 8 VAP released for other more recent models.

  Touchpad driver can be downloaded from the page of the Synaptics driver also other drivers like LAN or WLan can be found on chip manufacturer pages.

• HP ENVY M6-1105dx: Synaptics Touchpad freezes briefly after typing

  The touchpad of my HP Envy M6 1105dx hangs for several seconds after you type on the keyboard, each time. This problem started after I upgraded to windows 10. My drivers are up to date. I tried to uninstall and reinstall the drivers, but that has not worked. I would rather not reinstall windows if I didn't, so I decided to come here. All advice is appreciated.

  Hey, I had the same problem and it's really frustrating.

  Here's what I did to solve the problem, I hope it helps.

  Open 'Control Panel' by clicking on search and enter the control panel.

  Then, open "Synaptics Touchpad", it will have a version number after it I think. Mine did.

  Then click Advanced in the upper tabs.

  Then you should see that a "filter activation time" set it to zero seconds.

  

  Test now by typing and then move the mouse and see if that fixes the problem... it's me.

• all the features of synaptics works not

  HP pavilion g6-2016tx

  64-bit Windows 8

  Upgrade to Windows 8

  I installed the driver for the synaptics touchpad on my laptop. Features such as two fingers scrollig, pinch zoom doesnot work for me. When I tried to exercise the profession through the settings, it does not work

  Thanks in advance

  basilutd

  I'm linking you a document entitled "how to hell with the"Double Tap to toggle the Touchpad"Feature" below. Make sure that there is a check in the box of any item that you want to use.

  How Devil "Double Tap to toggle the Touchpad" feature

  http://support.HP.com/us-en/document/c03882926

  If you have any questions or concerns, please re-post.