Upgrade package ACS SE 1111 3.3.3.11 - K9

Similar Questions

• Reference Dell upgrade package cannot install the dell wifi driver

  Hello

  Since I reinstalled Window8 in my inspiron 3138, the laptop can not install the upgrade package from dell"and can not install my wifi driver.

  I can not install the following drivers and the laptop cannot detect WiFi at all.

  1704 Wirelss Dell Wifi driver (Network_driver_342TP_WN32_7.35.333.0_A01)

  Driver for the mod aircraft Dell (Network_driver_PX8MM_WN64_1.0.0_A00) switching

  Do you know how to solve this problem?

  Best,

  Lucy

  Please let me know which operating system you currently have on the computer. It's 10 or windows 8.1. Because the version you are trying to install is for windows 10. Also please go to Device Manager and confirm the card this wireless network adapter option.

• The upgrade to ESXi 4.0.261974 to ESXi 4.1.0 errors with "upgrade package validation failed"

  Hello

  I'm trying to upgrade a host 4, 0.x ESXi 4.1 using the vSphere host update utility WSXi. First, it downloads the patches as expected, I select the host, and select "Upgrade of home", and then I select the file "upgrade - ESXi4.0 - to-ESXi4.1.xxxxxx.zip" I downloaded. After a while, I get the message "upgrade package validation failure (not to read the metadata of upgrade file that is located in a folder temporary users where it was unzipped to)" and the update will fail. I tried with the client installed on an XP and a box of Windows 7 with the same question, and I tried a new download without any positive result. What I am doing wrong?

  Thanks for your help.

  See if that helps

  http://blog.vmpros.nl/2010/07/15/VMware-failed-to-read-the-upgrade-package-metadata-XML-upgrading-to-ESXi-4-1/#more-2953

• Level of ESX 3.5 update 4 CD vs upgrade package

  I am interested in upgraging my ESX 3.5 update 2 update 4. On the download page, it lists two options, the ISO image and the upgrade package. I downloaded both. I have updated using the ISO image before. It seems that the upgrade package is all the applicable to the update 4, usually installed patches using esxupdate. It seems easier to use the CD and update at the same time. The installation of several patches normally involves several reboots of ESX host. Will there be a situation where the upgrade package assistance would be more beneficial than the upgrade using the ISO?

  Thank you!

  No, if download you the archive update (zip file).  This will include all patches in a package, and you can run esxupdate in the folder decompressed to update all patches at the same time.

  -KjB

  VMware vExpert

• Impossible to upgrade of ACS 5.2 to 5.5 ACS - request is won't boot.

  Hello

  Someone at - he had problems upgrading a 5.2 to 5.5 ACS ACS?

  I start with a 5.2 Patch 5 launched basic machine that has a configuration of work and production. The documentation states that to upgrade 5.2 you need to upgrade to first or 5.3 or 5.4 and then run the upgrade to 5.5. I tried to use the 5.3 and 5.4 as the draft, but I have the same problem. I have confirmed that the version 5.3 or 5.4 working properly until I started the 5.5 upgrade but said the 5.5 upgrade that we succesfull ACS services will not start. I get the message: (and it stays like that)

  acs/admin# sh app sta acs

Application initializing...
Status is not yet available.
Please check again in a minute.

  I upgraded a 5.4 ACS running a default configuration to 5.5 with success so I know that my 5.5 upgrade file is not corrupted.

  I tried other things:

  • Carry out checks on the another patch and updated MD5 at file level.
  • Upgrade to the latest patch level of this version before proceeding with the upgrade
  • Make a compress of database prior to the upgrade of each minor version.
  • Reload the server at the beginning and before the upgrade for each minor release.
  • Wiping the system with the recovery disk 5.5 and restore 5.2 configuration (get the same error)
  • Application of the Pointed-PreUpgrade fix before the upgrade to 5.5

  Here are the steps to upgrade:

  • Start with the basic DCC 5.2 Patch 5 (running a production configuration)
  • Reload the ACS
  • Run the database compress
  • Apply the patch 5.2 11
  • Reload the ACS
  • Apply the upgrade 5.4 application
  • Apply the patch 5.4 6
  • Run the database compress
  • Confirm the ACS application works
  • Apply patch PreUpgrade Pointed to 5.4
  • Reload the ACS
  • Apply the 5.5 upgrade application

  Once, I get the error to happen so I can reset the config 5.5 by default, but then I lose all the information of production system.

  Anyone had similar problems?

  You're running in the default listed below. This defect will be corrected in the patch 2.

  CSCum67932 5.5 ACS starts only after the upgrade because of the unknown encryption algorithm

  To work around the problem, you must apply the hotfix pointed on top of ACS 5.5,
  then run 'database-compress' and finally remove the sharp patch.

  Kind regards

  Jatin kone

  * Does the rate of useful messages *.

• Upgrade process ACS

  Hello friends, I want to spend an ACS 5.0 to 5.1 and 5.2 version but in the upgrade instructions, there is a command line that I don't understand, is:

  Install patch ACS patch-name. tar.GPG repository repository-name

  I Don t know what is the name of this repository and if it's a repository that I need to create. I can download the files for installation (patch and the ADE upgrade) but I don't know how to place them in the GBA unit (if this is the case).

  Thanks in advance.

  Atte. Jonah Diaz

  Hi Jonas,.

  type:

  t conf

  -repository JonasRepo

  -url ftp://x.y.z.a/

  -regular user password

  You can then install the patch and use "JonasRepo" as the name of the repository. If you do not have to download patches for GBA but simply configure ACS to know where they are. You are not obliged to do FTP, you can use the question mark after "url" to see the different possibilities.

  Hope this helps,

  Nicolas

  ===

  Remember responses of the rate that you find useful

• Upgrade SE ACS 3.3.2 3.3.3

  Hi guys,.

  I want to SE ACS 3.3.2 upgrading to 4.1

  I read in the documents that I need to upgrade to 3.3.3 then to 4.1...

  I found how to change sounds 3.3.3 to 4.1 it to be smooth, but I can't find any clear document for the 3.3.2 upgrade SE to 3.3.3, claire document for that?

  I have to reimage the appliance? or his smooth & direct upgrade to 3.3.3? and what about the database? can I restore it?

  in the attachment you will find a page for upgrade of the device window.

  Kind regards

  No need to reimage acs. First of all, you need to update 3.3.3 then 4.1

  Measures remain same for patch 3.3 and 4.1. Enclosed please find the steps to upgrade.

  If you need software worm 3.3.3 you open a tac case.

  Kind regards

  ~ JG

  Note the useful messages

• [ACS 5.2] Upgrade to ACS 5.4

  Hello

  We got 2 Cisco ACS 5.2.0.26.10.

  Main server as authentication server and collector of newspaper

  Secondary server as authentication server. The replication is configured.

  I read the following guide: http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/installation/guide/csacs_upg.html#wp1194934

  "There are a few exceptions to this typical configuration, you can manage as described below:

  If the primary Server 5.3 ACS also works as a newspaper collector in your deployment 5.3, you should promote one of the secondary servers in the first server in the deployment. See the promotion of a secondary to the primary server .

  This exception is combined with my case. I promote my secondary server as primary.

  I would have:

  Secondary server as authentication server and collector of newspaper

  Main server as authentication server

  Now, I think I have to cancel the registration of secondary to the main server...

  According to the guide, I upgrade the server of the newspaper collector.

  "Step 1: select a secondary server to become a newspaper collector:

  I don't have another secondary server...

  What should I do now? (upgrade secondary/log Server? backend upgrade?...)

  This guide assumes that I have 1 primary and 2 secondary...

  I don't know what steps to follow...

  Thanks for your help,

  Patrick

  You have an open requestes TAC and so you will get their orientation

  Wil share still some general clarifiactions that I'm aware of when ranging from 5.2 to 5.4 ACS ACS

  For the first step in the upgrade process, you want to upgrade the collector's journal since will the configuration data and M & T.

  (1) if the ACS 5.2 log collector is a seconday should just remove from the deployment to make independent and then upgrade the server to be ACS 5.4. He will start the new ACS 5.4 main server (this is temporary and gets rectified at the end of the whole process)

  (2) if the collector's journal is primary GBA 5.2 then promote a difference then collector journal is now secondary and can follow step 1)

  At this point have a server on CSA 5.4 and rest on ACS 5.2. Can now begin to spend the rest of 5.2 to 5.4 ACS ACS servers (as guide says: "enter the secondary server for GBA 5.4 primary server '-c' is the main temporary server as described in step 1)

  Once all servers are migrated then can select "primary long-term." as opposed to a temporary

  this writing I see that it is hard to explain. Am sure that TAC will do better

• keep the setting of the user when upgrading packages

  Guys,

  its there a way to keep the user settings, when a thinapp packages upgrade, example, I thinapp firefox 3.6, so I want upgrade firefox to version 4, can the bookmarks and other settings migrate automatically between package 3.6 to 4.0 when the thinapp Gets the upgrade on the VM?

  in my case whenever I update the package, bookmarks are not migrate and the user begins with a database empty bookmark.

  Thank you.

  Maybe that's not Thinapp whats causing your problems. You know exact filepath or registry keys that are now the parameters of your bookmark? are they not different between versions of application? And these places have the same isolation mode? IMHO these location setting is different between versions of application and the old settings are visible in a newer version, but new version uses setting different location and that's why you don't see older settings in a newer version. IM on mobile phone, so I can't check on the computer. Let us know any results. We also provide versions of Firefox, you try to migrate settings between.

• upgrade package 6530

  Hello!

  I bought my 6530 in August 2009 and it is still ongoing.  When I bought the laptop, I had no idea what a 64-bit computer was.  Now I do.  That's why it took me a long time to realize that, instead of getting a 64 bit Windows 7 for my portable 64-bit update, I had an upgrade to 32-bit.  It's no wonder that my laptop has not performed as well as others say it does for them.

  It seems that there is no way to discuss even with Acer, there is no way to talk to them unless the unit is still under warranty.

  Any suggestions?

  no need to move to x 64 OS on 3 GB of ram.

• Windows 7 Home Premium upgrade package

  Why not install Windows 7 Home Premium on Vista Business upgrade... nothing on the box indicates this problem?  It is ridiculous to have to reinstall all my software and devote the time required to update all!

  Hi, Jim Brown,.

  See the article shows the way to upgrade to Windows 7:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Retrieve an activation of a 3 upgrade package because the results were not worth

  One of the computers I upgraded from XP to Windows 7 and activated using a reduction of 3 Microsoft computer kit does not work well enough to justify the change. Can I turn off just an and thus be able to upgrade a different computer later?

  Yes, you can, however, since you have already activated 3 times, you will need to activate by phone next time.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• Download upgrade packages - package is not available

  Hello

  I use OME to update my servers, I find OME is unable to download the package, it shows "Package is not available", but the package can be downloaded via the browser on the server of the OME.

  Anyone know why this happen?

  Steven

  Hi Steven,

  Thanks for the update!

  Then, refer to the online catalogue (e.g., FTP) source? If so, make sure you tried to configure the proxy settings located under the Preferences tab and using the Test connection button in he same page will confirm connectivity.

  Keep us informed, if it works.

  Thank you

  Castro

• I'm using CS5 and when I try to upgrade packages: Bridge, Fireworks and Photoshop are downloaded, but updates fail-why?

  I can spend the other CS5 components but not these three. What can I do to get these updates are processed on my 64-bit platform of Windows 8.1?

  When I go through all the steps: download, unpacking, etc. The bridge 4.0.5 and updates of Photoshop Camera Raw 6.7 cause bridge to run during the upgrade process that stops the update process!

• New configuration of the computer with Acrobat XI Pro Upgrade package

  I bought a new system with Windows 8 Pro, I throw in desktop mode. On my OLD system, I installed a purchased copy of Acrobat 5 Pro, which I later upgraded to Acrobat 8 Pro. My question is: what installation process I have to follow to install an copy newly purchased upgrade to Acrobat Pro XI on my new computer system, which currently is not one of my products from Adobe installed on it?

  You only need the serial number of the previous version that qualifies you for the upgrade.  You don't need to have one of these previous versions installed on the new machine.