Upgrade SE ACS 3.3.2 3.3.3

Similar Questions

• Upgrade package ACS SE 1111 3.3.3.11 - K9

  Hello:

  I need to upgrade an ACS SE 1111 3.2.3 to 3.3.3 version again to point 4.1.1 version. The problem is that the 3.3.3. version is not in the software download section. Where can I found it?

  Thank you very much

  Francisco

  Check if the ACS 3.3 is on your CD of 4.1. Otherwise, working with TAC to get a copy of 3.3

  -Charge Dan

• Impossible to upgrade of ACS 5.2 to 5.5 ACS - request is won't boot.

  Hello

  Someone at - he had problems upgrading a 5.2 to 5.5 ACS ACS?

  I start with a 5.2 Patch 5 launched basic machine that has a configuration of work and production. The documentation states that to upgrade 5.2 you need to upgrade to first or 5.3 or 5.4 and then run the upgrade to 5.5. I tried to use the 5.3 and 5.4 as the draft, but I have the same problem. I have confirmed that the version 5.3 or 5.4 working properly until I started the 5.5 upgrade but said the 5.5 upgrade that we succesfull ACS services will not start. I get the message: (and it stays like that)

  acs/admin# sh app sta acs

Application initializing...
Status is not yet available.
Please check again in a minute.

  I upgraded a 5.4 ACS running a default configuration to 5.5 with success so I know that my 5.5 upgrade file is not corrupted.

  I tried other things:

  • Carry out checks on the another patch and updated MD5 at file level.
  • Upgrade to the latest patch level of this version before proceeding with the upgrade
  • Make a compress of database prior to the upgrade of each minor version.
  • Reload the server at the beginning and before the upgrade for each minor release.
  • Wiping the system with the recovery disk 5.5 and restore 5.2 configuration (get the same error)
  • Application of the Pointed-PreUpgrade fix before the upgrade to 5.5

  Here are the steps to upgrade:

  • Start with the basic DCC 5.2 Patch 5 (running a production configuration)
  • Reload the ACS
  • Run the database compress
  • Apply the patch 5.2 11
  • Reload the ACS
  • Apply the upgrade 5.4 application
  • Apply the patch 5.4 6
  • Run the database compress
  • Confirm the ACS application works
  • Apply patch PreUpgrade Pointed to 5.4
  • Reload the ACS
  • Apply the 5.5 upgrade application

  Once, I get the error to happen so I can reset the config 5.5 by default, but then I lose all the information of production system.

  Anyone had similar problems?

  You're running in the default listed below. This defect will be corrected in the patch 2.

  CSCum67932 5.5 ACS starts only after the upgrade because of the unknown encryption algorithm

  To work around the problem, you must apply the hotfix pointed on top of ACS 5.5,
  then run 'database-compress' and finally remove the sharp patch.

  Kind regards

  Jatin kone

  * Does the rate of useful messages *.

• Upgrade process ACS

  Hello friends, I want to spend an ACS 5.0 to 5.1 and 5.2 version but in the upgrade instructions, there is a command line that I don't understand, is:

  Install patch ACS patch-name. tar.GPG repository repository-name

  I Don t know what is the name of this repository and if it's a repository that I need to create. I can download the files for installation (patch and the ADE upgrade) but I don't know how to place them in the GBA unit (if this is the case).

  Thanks in advance.

  Atte. Jonah Diaz

  Hi Jonas,.

  type:

  t conf

  -repository JonasRepo

  -url ftp://x.y.z.a/

  -regular user password

  You can then install the patch and use "JonasRepo" as the name of the repository. If you do not have to download patches for GBA but simply configure ACS to know where they are. You are not obliged to do FTP, you can use the question mark after "url" to see the different possibilities.

  Hope this helps,

  Nicolas

  ===

  Remember responses of the rate that you find useful

• [ACS 5.2] Upgrade to ACS 5.4

  Hello

  We got 2 Cisco ACS 5.2.0.26.10.

  Main server as authentication server and collector of newspaper

  Secondary server as authentication server. The replication is configured.

  I read the following guide: http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/installation/guide/csacs_upg.html#wp1194934

  "There are a few exceptions to this typical configuration, you can manage as described below:

  If the primary Server 5.3 ACS also works as a newspaper collector in your deployment 5.3, you should promote one of the secondary servers in the first server in the deployment. See the promotion of a secondary to the primary server .

  This exception is combined with my case. I promote my secondary server as primary.

  I would have:

  Secondary server as authentication server and collector of newspaper

  Main server as authentication server

  Now, I think I have to cancel the registration of secondary to the main server...

  According to the guide, I upgrade the server of the newspaper collector.

  "Step 1: select a secondary server to become a newspaper collector:

  I don't have another secondary server...

  What should I do now? (upgrade secondary/log Server? backend upgrade?...)

  This guide assumes that I have 1 primary and 2 secondary...

  I don't know what steps to follow...

  Thanks for your help,

  Patrick

  You have an open requestes TAC and so you will get their orientation

  Wil share still some general clarifiactions that I'm aware of when ranging from 5.2 to 5.4 ACS ACS

  For the first step in the upgrade process, you want to upgrade the collector's journal since will the configuration data and M & T.

  (1) if the ACS 5.2 log collector is a seconday should just remove from the deployment to make independent and then upgrade the server to be ACS 5.4. He will start the new ACS 5.4 main server (this is temporary and gets rectified at the end of the whole process)

  (2) if the collector's journal is primary GBA 5.2 then promote a difference then collector journal is now secondary and can follow step 1)

  At this point have a server on CSA 5.4 and rest on ACS 5.2. Can now begin to spend the rest of 5.2 to 5.4 ACS ACS servers (as guide says: "enter the secondary server for GBA 5.4 primary server '-c' is the main temporary server as described in step 1)

  Once all servers are migrated then can select "primary long-term." as opposed to a temporary

  this writing I see that it is hard to explain. Am sure that TAC will do better

• Upgrade ACS 4.1 and 4.2 authentic session expired: challenge not supplied by the customer

  Hello

  I upgraded Cisco ACS 4.1 to 4.2, I device Cisco Access Control 1113, as soon as I upgraded I get error in newspapers failed

  "Authentic session expired: challenge not supplied by the customer ', what is wring with that? Plesae help me

  Thank you

  I would really appriciate if mark you this topic as resolved so that the other can take advantage out of it.

  Kind regards
  Jousset

• It is free upgrade acs 5.0 to 5.1

  We recently bought an ACS ACS 5.0 1120. This time 5.1 is out, can I download it and upgrade my ACS?

  THX.

  Yes. The same license can be used for the 5.0 and 5.1

  In order to perform this update, there are a few tasks that need to be installed before the upgrade to 5.1

  (1) patch ACS 5.0 9. The OCC: 5-0-0-21 - 9.tar.gpg

  (2) ADE-version 1.2 / / / OS version operating system upgrades. The OCC: ACS_5.0.0.21_ADE_OS_1.2_upgrade.tar.gpg

  These two steps, use the following command "acs patch installs the patch name. "tar.gpg repository repository-name "

  Can then upgrade to 5.1 using following command:

  application upgrade Application-bundle name-directory-remote

  All the bundles of patch/upgrade can be downloaded EAC. 5.1 the package is called "ACS_5.1.0.44.tar.gz".

  More documentation detaield is to:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.1/installation/guide/csacs_upg.html#wp1167547

• Issue of ACS upgrad

  I'm about to upgrade the ACS servers two and I have a few questions. Both servers are running 4.0.27 and I'll take the last revision. I have all the files and the necessary appropriate "patches" in light of all that I read in the release notes. My questions are:

  1. as long as I have move away a GBA work, is it one problem to another for the upgrade down?

  2. is it all current server certificates that are installed stay or will they be reused after the upgrade?

  3. the current certificate is issued by an IAS server and will expire soon. What is the procedure for me to apply the new certificate?

  Thanx, Seth

  Go ahead and take a look at this:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.0/user/guide/Sau.html#wp373226

• ACS 5.5 upgrade patch

  Hi all

  According to Cisco, it is necessary to install the Patch: A-PreUpgrade -CSCum04132- 5-4-0-46 - 0 has .tar .gpg before moving to 5.5. Our current system running 5.4 has the latest patch 5-5-0-46 - 1.tar.gpg already installed.

  I am aware that the patches are cumulative and if install us later it covers all of the patches below. but the Readme did not specify the ID of Bud

  CSCum04132. Can you please advice what I need to install patch Pointed-PreUpgrade -CSCum04132- 5-4-0-46 - 0 to .tar .gpg before upgrade?

  Not sure how GBA 5.4, you have applied hotfix ACS 5.5. The 5.5.0.46.1 patch is for GBA 5.5.0.46 only.

  The fact-preupgrade patch is not covered by any rollup, as is a special patch.

  In order to upgrade the ACS from 5.4 to 5.5, here is the process:

  1.] apply the latest patch i.e patch 5-4-0-46 - 6.tar.gpg

  
  

  2.] apply the patch sharp i.e sharp-PreUpgrade -CSCum04132- 5-4-0-46 - 0 to .tar .gpg

  
  

  [3.] before running the "compress database" on ACS CLI.

  4.] apply ACS 5.5 application upgrade i.e ACS_5.5.0.46.tar.gz

  It will be useful.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Upgrade to Cisco acs 1120 to 4.2.1.15 help

  Hi all

  I downgrade of cisco device 1120 DCC acs 4.2.0.124 5.0, I need to upgrade to acs 4.2.1.15. Is device 1120 cisco acs supports 4.2.1.15, how do I upgrade 4.2.0.124 4.2.1.15.

  There are any server distribution for the upgrade. Please suggest on this, thank you

  Yes, you can upgrade it to 4.2.1.15 and you can download the version from the link below listed;

  http://Tools.Cisco.com/Squish/d4e4A

  Here are the files you need to download:

  ACSse-Upgrade-Pkg-acs-v4.2.1.15-K9.zip

  ACSse-Upgrade-Pkg-appl-mng-v4.2.1.15-K9.zip

  : Note apply the upgrade of management first and then software update. ..

  Distribution server is a machine where you can download the patch on the Cisco Secure ACS Appliance, so if you download the version on your laptop and download then only one distributor (nothing special)

  Upgrade an application of 4.2.1.15

  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2.1/Installation_Guide/solution_engine/upgap.html#wp1148376

  I hope this helps.

  Rgds, jousset

  Note the useful posts ~

• 1113 ACS SE upgrade 4.0.1.44 to 4.1.1.24 not

  Hello

  I am looking for some assistance, we have a v4.0.1.44 running Cisco ACS 1113 SE and try to update to v.4.2.0.124 following the instructions to upgrade to v4.1.1.24 first.

  We use the following CD

  "ACS SE overall upgrade CD ACS 3.3.4 and 4,1,1,24 implemented at level"

  We can download the 4.1.1.24 image of the ACS system via the distribution server, but the upgrade fails us got out following console when the attempt to upgrade has been tried;

  Upgrade package has not been verified.

  Apply this package to upgrade may corrupt the device

  Continue at your own risk!

  Continue? -y (yes), n (no) y

  Installation of Cisco Secure ACS Version: 4.1.1.24

  The upgrade... Upgrade process successfully launched

  Try to install ACS version 4.1 on software version 4.0.1.44

  Impossible to install Acs version 4.1 with software version 4.0.1.44

  GBA version 4.1 required software version 4.0.1.44

  First install the correct version of the software of the device

  Failed to upgrade to Cisco Secure ACS to 4.1.1.24

  Currently, our unit of ACS is the following:

  Cisco Secure ACS 4.0.1.44

  ACS - 4.0.144 - EnablePassword -CSCsh32888 fix (patch: 4.0.1.44 Thursday, November 22, 2007 19:51:37.95)

  The 4.0.1.44 application management software

  Base Unit 4.0.1.2 image

  CSA build 4.0.1.543.2 (Patch: 4_0_1_543)

  That would welcome suggestions.

  Concerning

  Jim.

  Hello Jim

  The upgrade package consists of 2 - files that is the management software and ACS software. You must first upgrade management and then continue the ACS software.

  The instructions are attached. I would like to know how it works.

  Thank you

  Nelson

• Upgrade from 5.0 to 5.2 ACS

  Hello

  Currently, I would like to upgrade an ACS primary / secondary 5.0.0.21.6 to the latest version 5.2

  The documentation says to use the recovery for the 5.1 CD provisional and then upgrades 5.2. Is this the same as the ISO image, which you can download from CCO?

  This will cause a problem with the license that you are actually broken box?

  Is it possible to use the ftp repository to make the upgrade without using an ISO / restoration disk image? What keeps intact licenses?

  When you upgrade you restore type "router" configuration and databases on both devices of the CSA? I guess that the answer to this depends on if the recovery / ISO image is used.

  Should I expect my primary / secondary relationship works on 5.1 or can I do each a 5.0 to 5.1 5.2 all in one fell swoop can sort out the primary / secondary ACS distributed environment?

  Thanks for any help on this

  Mark

  The recovery image would be an ISO format and upgrade would be a .tar format. Yes, these files can be downloaded EAC.

  You have read the correct procedure. After reimage, you must reinstall the license.

  We cannot use FTP for ACS 5.0---> ACS 5.1 upgrade. We have to reimage here, no other way.

  backup

  To perform a backup (including data ADE OS as host name, IP address) and place the backup in a repository, use the backup EXEC mode command.

  backup backup-name-name of the repository repository

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.2/command/reference/cli_app_a.html#wp1888749

  backup GBA

  To save a configuration ACS (not including the data of the BONE of the ADE), use the backup of the acs in EXEC mode command.

  repository backup backup-filename ACS repository-name

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.2/command/reference/cli_app_a.html#wp1886805

  Upgrade can be done while we both GBA in sync, you must unregister and register them again.

  I hope this helps.

  Kind regards

  Jousset

  The rate of useful messages-

• Upgrade ACS 5.1 to 5.3

  Hi all

  I need to upgrade our ACS 5.1 to 5.3 after I see this cisco Dockment this Doc is more complex

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.3/installation/guide/csacs_upg.html#wp1199421

  I don't understand any help please think of me answering my question

  1. we have 2 primary and secondary, with which we have to start to upgrade?

  -at the top, Doc started with

  Upgrade a deployment ACS 5.1 to 5.3

  2 - sholud I start using this method ACS upgrade deployments or sholud I use only a 5.1 to 5.3 ACS server is upgraded ?

  3 - frist I must save my server how to back up the two page server web ACS server or should I use ony command line?

  -This command

  Step 1 Save the ACS since the ACS 5.2 Server data.

  Step 2 Enter the following backup EXEC mode to perform a backup and place the backup in a repository.

  backup backup-name-name of the repository repository

  4. What is the name of a repository and how do I find

  5. also

  ACS, install patch patch - repository name.tar.gpg repository-name

  -Idon't know whatever that means

  Note

  Before upgrading a secondary server, you must cancel the registration of the primary server.

  6. what it means, what strike?

  7. I can take this update of the page Web directors of ACS

  8. If I need to upgrade our CMD ACS must install FTP server? How to install the FTP server in ACs or how to talk about this ACS server FTP

  Thank you all for the help

  AHA

  Tarik, great answer + 5

  Hello Abdullah Hashim

  You start by secondary. If he's a collector of newspaper and then move it to primary school for a while, once the upgrade has completed, bring it back to secondary, and upgrade of the main box.

  He recommended latest patch on the current version (to avoid known problems) before you upgraded to 5.3 or 5.4 GBA

  You are already using the latest patch of ACS 5.1 (IE patch 6) so you do not need to install another patch. ACS patches are cumulative, so no need to install the previous patches. The last being should have correct all defects.

  Let me know if you still have any questions.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• The upgrade to Cisco ACS SE and Remote Agent

  Hello

  Currently we are upgrading the PDC to Windows Server 2008, Standard Edition R2.

  I am little confused with information available for upgrade scenarios. Appearing on the current working versions.

  Cisco ACS SE - version 4.1 Build 23 5 Patch 1

  Cisco ACS Remote Agent version 4.2 (0.124)

  The new operating system will work on 64-bit, I think that the current ACE SE and the remote agent can / must be upgraded.

  My existing versions, give the possible scenarios of upgrade available for me. After that upgraded SE and Remote Agent should work for the 64 bit OS.

  Thanks in advance!

  Yes, it is not possible to upgrade the ACS ACS 5.2 existing to level 4.1. They are two different boxes run on a different platform.

  Unfortunately ACS 4.x does not support windows 2008 r2.

  5.2 ACS is the only option left, and you will need to buy a new box of seprate with the new licnese for this.

  Concerning

  Bellefroid

  Note the useful messages

• ACS 5.2 to 5.4 upgrade

  Hello

  Quick question - not technical,

  Do you need to seek a new basic license during the upgrade of ACS 5.2 to 5.4?

  See you soon

  Kenny

  No, even the basic licence should work correctly.

  Jatin kone

  -Does the rate of useful messages-