Upgrade process ACS

Similar Questions

• [ACS 5.2] Upgrade to ACS 5.4

  Hello

  We got 2 Cisco ACS 5.2.0.26.10.

  Main server as authentication server and collector of newspaper

  Secondary server as authentication server. The replication is configured.

  I read the following guide: http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/installation/guide/csacs_upg.html#wp1194934

  "There are a few exceptions to this typical configuration, you can manage as described below:

  If the primary Server 5.3 ACS also works as a newspaper collector in your deployment 5.3, you should promote one of the secondary servers in the first server in the deployment. See the promotion of a secondary to the primary server .

  This exception is combined with my case. I promote my secondary server as primary.

  I would have:

  Secondary server as authentication server and collector of newspaper

  Main server as authentication server

  Now, I think I have to cancel the registration of secondary to the main server...

  According to the guide, I upgrade the server of the newspaper collector.

  "Step 1: select a secondary server to become a newspaper collector:

  I don't have another secondary server...

  What should I do now? (upgrade secondary/log Server? backend upgrade?...)

  This guide assumes that I have 1 primary and 2 secondary...

  I don't know what steps to follow...

  Thanks for your help,

  Patrick

  You have an open requestes TAC and so you will get their orientation

  Wil share still some general clarifiactions that I'm aware of when ranging from 5.2 to 5.4 ACS ACS

  For the first step in the upgrade process, you want to upgrade the collector's journal since will the configuration data and M & T.

  (1) if the ACS 5.2 log collector is a seconday should just remove from the deployment to make independent and then upgrade the server to be ACS 5.4. He will start the new ACS 5.4 main server (this is temporary and gets rectified at the end of the whole process)

  (2) if the collector's journal is primary GBA 5.2 then promote a difference then collector journal is now secondary and can follow step 1)

  At this point have a server on CSA 5.4 and rest on ACS 5.2. Can now begin to spend the rest of 5.2 to 5.4 ACS ACS servers (as guide says: "enter the secondary server for GBA 5.4 primary server '-c' is the main temporary server as described in step 1)

  Once all servers are migrated then can select "primary long-term." as opposed to a temporary

  this writing I see that it is hard to explain. Am sure that TAC will do better

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet. Tried more than 30 times, even after reboot. Any suggestions?

  Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet. Tried more than 30 times, even after reboot. Any suggestions?

  You chose the option in iTunes to download the firmware first and install it in a second time after that?

• I have windows 7 key to business, how can upgrade to windows 10. I see that it is not included in the upgrade process

  I have windows 7 key to business, how can upgrade to windows 10. I see that it is not included in the upgrade process.

  In some forum I read, I can upgrade with a small charge for windows 7 ultimate, and after that I can move on to W10. Someone can tell me where and how do I upgrade to W7Ultimate?

  Thank you

  Windows 7 Enterprise is a volume license customer, it is not eligible for the free upgrade offer. If you have Windows 7 Enterprise through your employer, contact the network administrator or your Help Desk Support staff for more information on the upgrade to Windows 10 company.

  If you need Windows 10, you can purchase one license other wise, then perform a custom installation. You will need to reinstall the drivers and applications and also to save your personal files.

• Upgrade package ACS SE 1111 3.3.3.11 - K9

  Hello:

  I need to upgrade an ACS SE 1111 3.2.3 to 3.3.3 version again to point 4.1.1 version. The problem is that the 3.3.3. version is not in the software download section. Where can I found it?

  Thank you very much

  Francisco

  Check if the ACS 3.3 is on your CD of 4.1. Otherwise, working with TAC to get a copy of 3.3

  -Charge Dan

• Windows 8 for Windows Pro upgrade process freezes

  I go into the control panel and start the upgrade process to Windows 8 Pro. I asked my name and my address and press 'next' to go to the billing page. I fill it out correctly and click on 'next' and the process hangs.

  After several attempts I tried to go to the Microsoft Support and they want money to answer why it won't work!

  Someone at - it ideas?

  Try temporarily disabling your Antivirus utility and try again.

  If the transaction went through, you can retrieve your product key, try the upgrade manually:

  Go to the order summary page, you can find your product key:

  https://www.mswos.com/

  Press the Windows key + X

  Click System

  On Windows, click the link:

   

  Get more features with a new edition of Windows

  Click on the "I already have a product key link.

  Enter your product key and you will be promoted to the Pro.

  If you encounter any quelconque probleme problem with question summary and billing order, please contact a customer support agent to:

  http://support.Microsoft.com/GP/ESD-support-phone-numbers

• Local virtual machines VMFS (upgrade process)

  Hi all

  I would like to upgrade an an esx 3.5 esx 4 (both in local drives). The VMFS data with machines store virtual esx 3.5 (4 material) should be kept. And the question is, will the upgrade process (by using the upgrade utility-vsphere host client) crush the local VMFS?

  Thanks in advance.

  No, it uses the same version of VMFS. Your guests are kept. When the server is upgraded, you must update VMWare, and virtual hardware tools.

  Check this document: http://www.vmware.com/pdf/vsphere4/r40_u1/vsp_40_u1_upgrade_guide.pdf

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Lab Manager 4.0.2 upgrade process

  Say for 4.0.2 release notes

  "before you can upgrade Lab Manager, you must upgrade the vCenter server.

  See the Lab Manager 4.0 Installation and Upgrade Guide for

  more information. »

  I watched the Installation and the Guide to upgrade for more information, but nothing is mentioned about the upgrade to vCenter 4.1.  Lab Manager 4.0.2 does support vCenter 4.0 Update1/2?  I think so but I would make sure before that I upgrade.   Here are my planned upgrade steps:

  1. put at manager level of laboratory 4.0.1 to 4.0.2

  2. turn to level vCenter 4.0 U1 to 4.1

  3 upgrade ESX 4 U2 to ESX 4.1

  is this supported?

  Director of the laboratory of 4.0.2 is backward compatible with vCenter 4.0 u2/u1/GA

  Regarding the upgrade process, unless you are already on a 64-bit operating system, then there's leg work to do the upgrade to vCenter himself.

  If you are already there, then it is fine.  LM may be the first in this situation.

  If you need to migrate vCenter, so long that the INVESTIGATION period change in fact... it is good.  If it does not change, you can tell the LM Wizard to change the IP address of vcenter.

  If you forget to change it, you can simply update the web UI of LM.

  overall, LM must be quite tolerant changes when you go in LM 4.0.2.

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• On the 11i upgrade process

  Hi all
  
  I have a few questions about the upgrade process, we have Applications 11.5.10.2 on 9.2.0.8 database installed on IBM AIX 5.3 Server.
  
  As you know extended support requires patches for applications and data base. My first question is; should I upgrade database to 10g or 11g, is there an advantage of the differences between them, all interoperability issues?
  
  My second question is should I do upgrade the databases first or after patches of applications according to the note: 883202.1 (reference Patch minimum prerequisites for Support extended on Oracle eBusiness Suite 11.5.10)?
  
  And my last question is; I tried running DBUA and DBCA just for the test but two files point to same ORACLE_HOME and hurt, I can fix these files but I think that other dependent files will also point wrongly ORACLE_HOME, is it a utility (autoconfig?) to fix these files?
  
  Thanks a lot for your help
  
  Burak

  Burak,

  Please see the docs for a list of the variables env, that you define.

  Complete the checklist for manual updates to GR 11, 2 [ID 837570.1]
  Complete list of control to upgrade the database to 11g R2 using DBUA [870814.1 ID]

  Thank you
  Hussein

• Impossible to upgrade of ACS 5.2 to 5.5 ACS - request is won't boot.

  Hello

  Someone at - he had problems upgrading a 5.2 to 5.5 ACS ACS?

  I start with a 5.2 Patch 5 launched basic machine that has a configuration of work and production. The documentation states that to upgrade 5.2 you need to upgrade to first or 5.3 or 5.4 and then run the upgrade to 5.5. I tried to use the 5.3 and 5.4 as the draft, but I have the same problem. I have confirmed that the version 5.3 or 5.4 working properly until I started the 5.5 upgrade but said the 5.5 upgrade that we succesfull ACS services will not start. I get the message: (and it stays like that)

  acs/admin# sh app sta acs

Application initializing...
Status is not yet available.
Please check again in a minute.

  I upgraded a 5.4 ACS running a default configuration to 5.5 with success so I know that my 5.5 upgrade file is not corrupted.

  I tried other things:

  • Carry out checks on the another patch and updated MD5 at file level.
  • Upgrade to the latest patch level of this version before proceeding with the upgrade
  • Make a compress of database prior to the upgrade of each minor version.
  • Reload the server at the beginning and before the upgrade for each minor release.
  • Wiping the system with the recovery disk 5.5 and restore 5.2 configuration (get the same error)
  • Application of the Pointed-PreUpgrade fix before the upgrade to 5.5

  Here are the steps to upgrade:

  • Start with the basic DCC 5.2 Patch 5 (running a production configuration)
  • Reload the ACS
  • Run the database compress
  • Apply the patch 5.2 11
  • Reload the ACS
  • Apply the upgrade 5.4 application
  • Apply the patch 5.4 6
  • Run the database compress
  • Confirm the ACS application works
  • Apply patch PreUpgrade Pointed to 5.4
  • Reload the ACS
  • Apply the 5.5 upgrade application

  Once, I get the error to happen so I can reset the config 5.5 by default, but then I lose all the information of production system.

  Anyone had similar problems?

  You're running in the default listed below. This defect will be corrected in the patch 2.

  CSCum67932 5.5 ACS starts only after the upgrade because of the unknown encryption algorithm

  To work around the problem, you must apply the hotfix pointed on top of ACS 5.5,
  then run 'database-compress' and finally remove the sharp patch.

  Kind regards

  Jatin kone

  * Does the rate of useful messages *.

• Upgrade SE ACS 3.3.2 3.3.3

  Hi guys,.

  I want to SE ACS 3.3.2 upgrading to 4.1

  I read in the documents that I need to upgrade to 3.3.3 then to 4.1...

  I found how to change sounds 3.3.3 to 4.1 it to be smooth, but I can't find any clear document for the 3.3.2 upgrade SE to 3.3.3, claire document for that?

  I have to reimage the appliance? or his smooth & direct upgrade to 3.3.3? and what about the database? can I restore it?

  in the attachment you will find a page for upgrade of the device window.

  Kind regards

  No need to reimage acs. First of all, you need to update 3.3.3 then 4.1

  Measures remain same for patch 3.3 and 4.1. Enclosed please find the steps to upgrade.

  If you need software worm 3.3.3 you open a tac case.

  Kind regards

  ~ JG

  Note the useful messages

• Part of the 'geography name referring to program' of the upgrade process?

  Hi all

  We were upgraded to R12.1.3 and currently in the first iteration.

  When you query the former transaction window workbench Transaction we get,"'the system cannot determine the geographic information for this place and cannot be derived from a tax jurisdiction. Contact your system administrator"error.

  I ran the "geography name program referencing" after getting this error. and that the error has been resolved.

  Advice kindly, 'name geography program SEO ', is it process a part of the upgrade or manually run the program.

  Thank you

  AtulR

  Please see:

  Workbench transaction error: the system cannot determine the geographic information for this place and cannot be derived from a tax jurisdiction (Doc ID 438718.1)

  Form transaction error: interviewing or creating a movement triggers the error: the system cannot determine the geographic information for this place and cannot be derived from a tax jurisdiction. Please contact your system administrator. (Doc ID 1350601.1)

  Problem of referencing name geography: Map_status for a location_id is 'E' in the table HZ_GEO_NAME_REFERENCE_LOG (Doc ID 1368312.1)

  Thank you

  Hussein

• Upgrade process 2.2 and 2.3

  Is there a process to upgrade from 2.2 to 2.3 meter use vCloud. I guess this is a minor update, because there is not an increase in the number of major version. I would not mind setting up a new server, but I don't know what to do to be reported. I can't plan the upgrade at midnight on the end of the month, so it would be somewhat need to old and new versions. I have found no guidance for this on the page download or these forums, but if I forgot something, please direct me to it.

  We have a version of the patch coming out in the next weeks which will include a place in upgrade from version 2.2 to version 2.3.

  It also includes some other minor changes as a patch for ESX 3.5 hosts and vCenter Server 4.0, zip code and the country to add to the report of client, SMTP fixes for specific email servers and validation of the email for automatic reports.

• Upgrade process

  Hey guys,.

  I have currently a cluster of ESXi hosts 3.5U3 I'm looking to upgrade to 4.0U1.

  KB1016262 of reading, it seems that my approach will have to apply a patch. Since this seems to be a patch for ESX4.0 and best practice is to upgrade vCenter before upgrading ESX, the recommendation seems to be a long process:

  • Go vCenter to 4.0

  • ESXi 4.0 upgrade

  • Apply the specific fix to ESXi

  • Last upgrade vCenter for 4.0U1

  • Patch ESXi

  I've experienced the bug in our test environment, and what I understand, that it will not affect, for example, the host update service to connect to a server and upgrade. Is there a reason I can't do just this:

  • Put the hosts in maintenance mode

  • Last upgrade vCenter for 4.0U1

  • Upgrade to ESXi ESXi - 4.0.0 - 1.9.208167 - upgrade - release.zip to ESXi4.0U1 with

  It is much less updates and reboots, and experience in our laboratory has been that each update/patch took some time, and I really want to minimize downtime.

  PS, final step that I use VMCLI to apply the hp - esxi4.0uX - bundle - 1.2.zip.

  1. you don't have to put hosts in maintenance mode during upgrade to vCenter.

  2. you can go directly to vCenter 4u1 without 4.0.

  3. use of the update to upgrade Manager ESXi is 4u1.

  4. apply all patches released after 4u1.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru