upgrade RAM 4 GB, windows 8 (32-bit)

Similar Questions

• Upgrading RAM for the installation of 64-bit guest OS on 32-bit host OS

  Hi all

  I am a total newbie to VMWare and I have a curious question.  Currently, I have an Intel Core i7 920 PC running on Windows 7 Ultimate 32 - bit with 3 GB of RAM DDR3 triple channel. I just installed VMWare Workstation version 7 on this PC.

  Now, I understand that Win7 32-bit build does a maximum of 3.4 GB RAM logically and not beyond. My intention here is to move the RAM to 9 GB, and then install the version 9.04 of Ubuntu 64-bit on VMWare with 6 GB of RAM reserved for the Ubuntu. My question then became: the guest OS (Ubuntu) would be able to use the 6 GB of RAM that I intend to allocate to it from the host OS (Win7), does that up to 3.4 G memory?

  I want to thank everyone in advance for your help.

  Best regards

  Peter Lee

  Hello Peter,.

  Unfortunately, you will need to have a 64-bit OS host to do what you want. The guest operating system will not be able to use memory that is presented to it through the host. Is there a particular reason that you have installed Windows 7 32 bit instead of 64-bit?

  See you soon

  Kevin

• HP pavilion dv6: Hp pavilion dv6 i7 Q720 1.6 Ghz ram: 4 GB windows 7 (64-bit), ram upgrade

  I would like to replace the 4 GB of ram, with 2 x 4 GB, I would like to know which model is compatible, and if this can be good:http://www.amazon.it/memory-upgrades-1333Mhz-Macbook-computer/dp/B004TQHL7G/ref=sr_1_1?s=pc&ie=UTF8&...
  concerning
  Filippo.

  FiL0

  The memory modules that you asked initially are not compatible with your laptop.

  The modules of memory at the crucial following are guaranteed compatible.

  http://www.crucial.com/USA/en/compatible-upgrade-for/HP---Compaq/Pavilion-DV6-3044el

  Transcend and G.Skill memory on the site modules are also guaranteed compatible modules.

  https://www.memoryc.com/HP-Compaq-laptop-DV6-series-DV6-3044el-memory-upgrade.html?countryc=NL&

• 4 (2.62 usable) GB RAM? System window 8 64-bit

  Upgrade Windows 7 to 64-bit window 8. I rolled 1 GB ddr1 ram, but it shows only 2.62

  2.62 exceeds the memory of 64-bit windows

  1, some computers may use only 1 or 2 sides ram cards to chip, not both, install one or the other.

  Also, you may have a bad battery MB, if it's a desktop pc, install a new one, they cost about 5.00

  Read the manual of the owner on the 'how', once installed reset the BIOS as it returns by default...

• Satellite A500 - only 2.96 GB RAM available on Windows 7 32 bit

  Hello
  I use Windows 7 on a Satellite A500, and when I go into the properties of computers, she says only 2.96 GB of RAM is available.

  I use the 32-bit version of windows 7, but I thought the RAM limit in 32-bit 4 GB... ?

  Why all my RAM is not available?

  Thank you.

  Hello

  The maximum capacity of RAM can be used on * all * 32 bit OS is 3.2 GB of RAM. It of not possible to use all 4GB RAM you have.

  I guess everything's ok. Don t forget that memory will also be shared with the video RAM. So, I think that your laptop uses the missing ability to RAM for the graphics card.
  Here's a good article on this topic that explains this:
  http://APS2.toshiba-tro.de/KB0/TSB82022E0000R01.htm

• Impossible to upgrade to SP3 for windows xp 32 bit

  Windows Update is not updated my windows to SP3, always on SP2. I have Windows XP Professional Service Pack 2 (build) 2600.

  When I use the update, I get a message that "upgrade software for some components required window. I go ahead and hit the download and install now button and I get a message that "some updates have not been installed. specifically the windows genuine advantage validation tool (kb892130). Update watch then a screen that says update failed please see history for more information. This story shows that (KB959140) failed to come back on January 14, 2009. There are a series of updates for XP; they are KB950474, kb92554, KB890830, KB905474. The last two have been cancelled twice.

  Any ideas? Thank you

  W

  First of all, let's check that your version of windows is legitimate. Click on the link below. In the left pane, click "Validate Windows". Allow validation to complete. If you have MS Office installed so validate once windows validation is complete.
  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• My Deskjet F380 printer will not scan after upgrade from XP to Windows 7 32 bit

  I have a HP printer Deskjet F380 (S) NC 73 NGZ14S which worked perfectly on Windows XP. Island re install software without disk original and well as the printer and copier are working the scanner is not. I have downloaded and run the Wizaedand that had this message "Full HP software is already installed, but the basic functionality pilots seem to be missing or configured incorrectly. Assistant and then went to "drivers for your printer are disabled click next to allow them to" clicked Next, and he returned to the previous message again. I have not installed the software on. Windows 7 but I don't know that my original HP software disk has not been used. Now must I UN install Windows 7 and re install from the HP website. I got another message in short while the HP site it says driver required WIA trawling. I'm not very experienced on the computer and would like your help thanks Mimosa

  Yes, I would uninstall the driver and software and then download the driver for Windows 7 and install it.

  Here are some instructions for uninstalling: uninstalling the printer software.

  You can download the driver here: Driver and software downloads.

• I'm trying to upgrade a computer to windows 7 32-bit to windows 8. However, he tells me to uninstall Trend Micro before, but I can't find espadrilles to uninstall. Any help?

  I can't find any reference to the espadrilles.  I remember never install a copy.

  Hi Billy,

  I think you mean Trend Micro (or the fact that I could not find any "Trend Micro").  Please see if the following is helpful: http://esupport.trendmicro.com/solution/en-us/1056551.aspx.

  If this does not work, then please try http://www.appremover.com/ and use the two methods if necessary to find and remove the AV programs on your system (which should include everything that is).

  Good luck!

  Kosh

• Satellite U400-15E - upgrade to Windows 7 32 bit now NO sound via HDMI

  I've upgraded from vista to windows 7 32-bit, now I have no device HDMI appears under playback devices, I installed new drivers for windows 7, but still no luck. Under Device Manager/noise appears as a HDMI enabled device and when it is connected to a TV video output is indicated but not HDMI audio. Please can someone...

  Nice ad, buddy! :)

  I think that your assignment could be useful for other users too.

• Upgrade RAM from 8G to h-Satellite L505 - 13

  Hello

  Saw 4G of RAM (2 x 2G), I wanted to move to 8G (2 x 4G). I discovered that my motherboard supports 8G DDR3 1066 Mhz (PC3-8500) maximum. I bought the two RAM modules: Corsair CM3X8GSDKIT1066.

  My BIOS accepts these and shows a total RAM 8192 Mr. I have BIOS version 2.10 (latest version). I disabled "USB Legacy Emulation".

  Windows 7 32 - bit and Linux 32-bit without PAE running job. They detect the 3G of RAM.
  Running Windows 7 64 bit stops the laptop, even in Safe Mode. Running Linux 32-bit with PAE or 64-bit Linux, the laptop stops after a few minutes. Install Linux 64-bit with 8 G RAM in place also stop the laptop a few minutes after the start of the installation.

  What is wrong with my system and how can I upgrade the RAM to the maximum size supported?

  Thank you.

  Hello

  The laptop supports an i5 - 430; CPU and supported FSB is 1066 Mhz.
  This means that the RAM modules would be max at 1066 mhz
  The laptop supports also the 8 GB of RAM (2 x 4 GB)

  In my opinion, it seems that the new modules are not completely OK or compatible
  There are many users of this forum who has had problems with the modules of Corsair

  Try the good quality of Kingston modules, they might be expensive, but should work ok.

• T61p drivers on Windows 7 (64-bit)

  Hello

  I want to upgrade my laptop to Windows 7 (64-bit) Windows XP I use (instead of slow Vista) is old enough (and only 32-bit). I found there is no drivers for a lot of thing (tried the system update, but it downloaded only a few drivers). Finally found almost all the drivers except the host controller card SD/xD/MMC (RICOH). I found only an unsigned driver, so it does not work.

  The product id is 6457-7WU.

  I don't know why Lenovo does not support drivers for this model. I would expect a more portable $1700 much better support, especially when it has been provided by one if is bad operating system like Windows Vista. I am really satisfied with it. Any chance of Lenovo will update to the drivers also on this old model so I can use Windows7 64-bit (and perhaps extend the laptop with 8 GB of RAM)?

  Thank you for the answers.

  So finally after the second test, I installed the laptop with all the drivers. The Lenovo system update did not help. First try: installed 3 updates from windows update, then installed an update full Lenovo Lenovo and fact system update. Then update Windows stopped working. Was still problem with a RICOH card driver, so I deleted and tried again.

  It was a success way, which I finally did:

  -Install Windows 7 64 bit (in my case, the most recent available professional version of MSDN, number 676939 in a built-in ISO with SP1 file name)

  -Download all windows updates until you update everything

  -Install the following drivers/software of the site lenovo (the driver name and the file name):

  1 Ricoh card driver (7kss73ww) - I think that it is available from a different models of laptop Lenovo (R400, T400)

  Integration of features Hotkey 2 (8jvu20ww)

  3 fingerprint Software (g1f812ww)

  4 fingerprint Software Patch (g1f912ww_64)

  5 ThinkVantage Active Protection System (g1sk57ww)

  6 features Hotkey patch (00vu01ww)

  The power management of Lenovo 7 Driver (g1ku20ww)

  8 power Manager (g6u432ww)

  9 Bluetooth with Enhanced Data Rate software II (7zbv19ww)

  After that the laptop seems fine. The display driver should be updated from windows update, but you can reinstall as the main driver. I do not installed the system update after the unrest with a first installation. It seems that it is in conflict with windows update.

• Qosmio G30 (PQG32L) - can use only 3.25 GB of memory on Windows 7 64 bit

  My Qosmio G30 (PQG32L) found 4 GB of memory, but only 3.25 GB of memory can be used. I'm updating to Windows 7 64-bit, but it does not help.
  BIOS reports 4 GB of RAM.

  Windows 7 64-bit operating system

  Anyone can activate the Qosmio G30 usable memory to 4 GB?

  What Intel Chipset is in the G30? (Launch CPU - Z to find out. Google is your friend)

  Some Intel chipsets are limited to 3 GB.

• Satellite L635 - how to change Windows 7 32 bit to 64 bit?

  Need help.

  Satellite L635 bought a few months ago with Windows 7 Home Premium installed on the HARD drive. When the first time activate Windows, I can choose 32-bit or 64-bit Windows, then I chose Windows 7 32 bit.

  Can I switch my laptop RAM 4 GB, 2 weeks ago. And I come to know that windows 7 32 bits can not read more than 3 GB of RAM. Only windows 7 64 bit can read more than 3 GB.

  My question is, how do I change from 32-bit to 64-bit Windows because toshiba gave me Windows 7 install CD / DVD. Windows has already been installed on the HARD drive.

  Thank you.

  Hello

  > because toshiba gave me Windows 7 Installer CD / DVD
  Yes, because you must create this disk yourself using pre-installed recovery media creator. But I m wondering why ask this question here because it s mentioned in the user manual you must create this disk as soon as possible. If HDD recovery would fail or install another OS, you need this CD to restore preinstalled settings of Toshiba.

  If you use the (boot from it) Toshiba Recovery disk, you should be also asked if want to 32-bit or the 64 bit version of Windows 7. So I recommend creating these discs and use it to install Windows 7 64 bit.

  Check this box!

• OfficeJet 4630: anyone can print reliaby with Officejet 4630 under Windows 10 (64-bit) using wireless?

  I have a couple of PCs.

  Both run Windows 10 (64-bit).

  An upgrade from 8.1 64-bit. The other is Windows 7 ultimate (64 bit).

  I bought Officejet 4630 at the end of September.

  So far I have not been able to print from a reliable PC at all.

  Sometimes maybe a page can be printed, but if I try the next page. The print queue seems to get hung.

  Worse, on a PC (Win7 64-bit upgrade), I can not connect with USB at all.

  Immediately after installing the driver, it fails to "print test page"? What gives?

  (I have not tried the USB connection with other PCs through the situation. He's far away and so connected via radio.)

  Strangely enough, it's the HP printing diagnostic seems to work perfectly. It prints the test page.

  But, after a week of Calvary and see how works the test via the web interface, I now have the feeling that

  HP diagnostics program simply sends a command that causes the printer to print a test page to itself, and not

  through the path of ordinary driver through what print ordinary application data. It can be found.

  Due to the failure of printing with a USB connection, I asked local HP support for replacement t

  hinking that unit was bad.

  However, the replacement arrived today, but the same symptom!

  Agah.

  I'm afraid that HP screwed royally here, but worse yet, it doesn't seem to be aware of the problem in the light of some

  Reviews of so-called unconscious support people!

  If someone has this printer works reliably on windows 10 64 - bit

  Please let us know what you were doing. (although the chance that someone with perfect condition watch Forum HP may be low. You are posting and I read this forum because of problems...)

  -How you installed the driver (from which source)

  -which tweaks you did.

  I tried to install the OJ4630_198 and the driver is updated to Windows.

  Windows Update seems to be a little better, but still stuck print jobs are seen after a few

  tests and unnecessary. (Initially because of this apparent initial success, I thought that the problem was limited

  so a PC, but now I think that both PC evenly suffer failure).

  So far, I tried to change the PORT to a fixed TCP/IP address port (which sometimes seems to be feasible: sometimes not.) I was not able to understand why. Maybe the difference between HP driver or Windows update)

  Sometimes after the Ministry of port, the first printing time works, but the

  next print does not work.  It remains in the queue.

  This has been driving me crazy...

  If person not steps forward with the installation of reliable work (10, 64-bit windows), I think I'm going for it back to HP, although the initial cooling period has expired from a legal point of view, I'll see if I can convince the support contact.

  I bought HP printers only over the years. They lasted well and worked like a charm, and the black ink was really nice.

  After that, I can't printers recomment the HP to my friends more.

  TIA

  [Driver in Deskjet 6980 works for printing with capricious 4630]

  Under improved Windows 10, too!

  I checked it after upgrading my PC under Windows 7 64-bit of Windows 10.

  After a few false starts, however, some programs are missing 'Dropbox' "Norton Internet Security" (?)

  sort: I downloaded the binary Moose and once I let the Installer run again, they picked up the proper

  configuration of the previous installation and started running.

  I needed to tweak 'Register windows' but when I tried to run 'regedit' something 'Extended attributes are '.

  inconsistent"and any program that requires administrative privilege would begin: maybe Dropbox and Norton Internet

  Security has failed because of this issue. Surprisingly, I could fix this by restoring the default Windows theme.

  (In my previous attempt to update, I put it to something Bing, a jazzy theme on the Japanese season, or something.

  Affected and surprising finished showing 'Extended attributes are incompatible' (or you may need to

  reset the sound theme as well. YMMV.) I raised this strange questions after the upgrade just in case

  These problems are related to the Deskjet 6980 under Windows 7 64-bit driver installation before upgrading to Windows 10.

  Somehow, however, the previous installation of the driver instance 4630 seems to have disappeared (maybe I deleted it before

  the upgrade, I don't know.) So I install driver 4630 for * SCANNING * purposes only.

  FAX can wait a while.

  Finally, some working environment for Officejet 4630 with using the Deskjet 6980 driver for printing

  is being created.

  TIA

• I'm upgrading from Vista to Windows 7 and download repeat myself "content of the file could not be verified."

  I tried to download the upgrade from Vista to Windows 7 (32 bit) and get the following message is displayed.

  "The file could not be verified."

  Please directly contact the Microsoft Store.