Pavilion g4-1117DX: fail to complete the restore of HP. Error mess - 'Error of CTO Flg' + ' [205] UIA writing failed 3 times!
After failing to recover my system from hard on the D-disk partition recovery software, I bought HP Recovery disks from HP support turned on the PC and installed the first disk according to the instructions. I also pressed ESC on powerup and then selected F9 to boot from the DVD. After 5 minutes of access to records of HP recovery in the DVD player, an error message led indicating that "HP restore incomplete". I looked at the details of the error and showed an other error message stating "[205] UIA writing failed 3 times! In any case I try to do the PC recover either by the recovery using the HP Recovery Manager Software Manager & recovery on the drive partition hard D or using the HP Recovery DVD s I get two ways the same 'error CTO flg' + ' [205] UIA writing failed 3 times. Anything else that can be done, please?
Thanks for the reply. Since I posted my problem on this Forum description, I worked directly with the HP Support and finally concluded that I have needed to push the F9 key button immediately that the PC has been poweringup. Do this correctly then leave the HP recovery disks provided (I bought them from HP) be read by the system and recovery properly executed.
But it shows there is some question buggy with the test drive HP I ran several times and each time has shown an error message of hard drive with result [305] and also [303] - that led me to that almost an expensive for a 320 GB hard drive HP replacement purchase.
Fortunately HP support people were so full with me and kep remember to follow-up with me to see how I was doing and then I got my laptop HP back from work. otherwise I would have made a mistake and installed the third disk, driver HP disk - and his great work now faster than ever.
Thanks Hewlett Packard.
Actually, I was aware of this type of support for HP since the 1970s, when I buy and install servers HP A2100, then servers HP 1000 HP 9000 server, and I have met and had presentations from the team of engineering and management in California from HP this for me and my boss the next type of systems that HP grew for the future and then the HP - DEC ALpha - all this for machinea the best range of computers with the best support for ground control systems (GE Americom in time) operating a critical General Electric fly over most of the commercial SATCOM satellites in the United States. Even if I quit this job just now, HIS AMericom always uses HP to fly to the top of 20 + satellites over the United States and around the world.
Shows just why HP is the longer computer company and will continue to be!
My support case number was 3013351909 so that whoever the Lady of HP support could get credit for its excellence and how she persisted on its initiative of checkin continuously with me and guide me and helped to stop me from buying a disk hard when I didn't need to.
Thanks HP and what concerns the life long realtionship with me!
Tags: Notebooks
Similar Questions
-
Cannot complete the restore of the ipad
I have an ipad 2 and lately he died, I connected to itunes and it tells me I have to restore, it worked only once, then after 5 minutes, he went back into recovery mode, my main problem is error '9', it is mainly the loss of connection between the pc and the ipad, and I noticed during every restoration I try it makes the sound when you unplug a device then a few seconds later, it makes the sound when you connect the device and the computer plays sounds about 3 times each restoration when it is verified he makes sounds and said "Waiting for ipad" I tried to pass the cords and USB ports, but it just keeps doing the same thing, please respond with a solution or even a hint that I would really appreciate it thank you!
Hello, Jackal8east.
Please visit Apple support communities.
I understand that you receive error message 9 on restore. Here are the troubleshooting steps I recommend to go through this type of error. Feel free to skip troubleshooting steps you have already lived.
Check your security software
Errors: 2, 4, 6, 9, 1611, 9006.
Security software may stop your device to communicate or the Apple update server with your device.
Check your security software and settings to ensure that they are not blocking a connection to Apple servers.
If you still see the error message, locate the USB connection problems.
Check your USB connections
Errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014. You can also see a message that includes "invalid response".
If the USB connection between your device and your computer is interrupted, you will not be able to update or restore.
To narrow the problem, try different equipment:
- Use the USB cable supplied with your device, or another cable USB Apple.
- Plug your cable into another USB port directly on your computer. Do not connect on your keyboard.
- Try another computer.
- The other problems with the USB connection, then with your security software.
If you still see the error message, search for hardware problems.
Search for hardware issues
Errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 53, 56, 1002, 1004, 1011, 1012, 1014, 1667 or 1669.
Your device or your computer might have a hardware problem that prevents the update or restore to complete.
- Make sure that your security software and settings are not blocking your device to communicate with the server to update from Apple.
- Then try to restore your iOS device twice more when you are connected with a computer cable, and network that you know are good.
- Make sure that your security software and settings are allowing communication between the servers of your device and update.
- If you still see the error message when you update or restore, contact Apple technical support.
Get help with iOS update and restore errors
See you soon
-
IPod touch 6 generation happened in brick mode and I restored it by the he output in dfu mode and restore to the factory via itunes settings and it says it has finished restoring. And the ipod starts up and has the apple logo and a loading bar that do not move and it's stuck and it's been a week and I've done this process over and over
Hi, Slkdogg1.
Please visit Apple support communities.
I understand that you cannot restore your iPod touch, and it looks like it is stuck on the Apple logo with progress bar. I would like to start by going through the steps outlined in the article below.
The Apple logo with the bar of progression after the update or restore iPhone, iPad or iPod touch
If this does not resolve the problem, try to go through the troubleshooting steps in the articles below.
Solve the iOS update and restore error in iTunes
Resolve alerts related to USB in iTunes
See you soon
-
Frozen Keybaord after completing the restoration of the system
Originaltitle:
HP Pavilion using the xp operating systemHello
1. are you able to log in to Windows?
2. you use the keyboard integrated with the laptop or is it an external keyboard?
3. What is the serial number and model of the keyboard where it's an external keyboard?
If you use an external wired keyboard, then you can check the link below to fix the problem.
Troubleshoot wired keyboards that don' t answer or that typing wrong characters
-
I have a Dell laptop which does not connect to the internet via the wireless connection. I can connect via a line to broadband, but not the wireless. My work PC and iPad are connect. I tried compand repair network and he says that the problem is resolved. I tried a system restore a week before that the problem started.
Any other suggestions? Thank you
Most often when a device is not it's because of a driver. Try reinstalling your.
It works for vista, win 7 & 8
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1
http://captaindbg.com/how-to-update-drivers-on-Windows-7/
-
I've been locked out of my computer spyware which registration a password on my home screen. My only recourse is to use the installer provided with computers said, but since I bought mine at a Staples, none came with it.
I was told that by submitting a product ID (after that already try all the numbers at the bottom of my laptop, including the one pointed out by the local Technical Support to the electronic store), I could get a free copy of Windows Vista.
Could someone from Microsoft to please contact me so I can get this resolved thank you very much.
I'm sorry, but someone gave you bad information. Since Windows Vista is preinstalled on your computer, the computer manufacturer is responsible to support. Microsoft is unable to send you a free version. Contact your computer manufacturer and ask them to send a disk of Windows Vista installation for your computer model.
However, one of these options can fix your computer without having to reinstall Windows:
- Start the computer in safe mode and use system restore to return to a time before the spy software has been installed.
- Do a web search for "delete xxxx", where "xxxx" is the name of the spyware program. That should bring up several sites that describe how to remove the infection.
-
Unable to complete the restoration of the system after opening a document
original title: I think I have a virus that came in my folder of document called "Bethel."... "There were three docs. When I opened the first, I no longer can restore to an earlier date of my system operations. What should I do? Thank you!!
I have a backup on CD that I took before the virus.
Hello
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Equium L20 - cannot complete the recovery procedure - disk error
Hello
I have a laptop Equium L20 and whats happened is, during a recovery of product, he gets to 25% then emits an error at me and stops working.
Now when I turn on the laptop, I get the Toshiba screen, then nothing.
I was informed that my drive is probably broken and I now no operating system but I am a complete computer novice so don't know how it is.I took the laptop to PC world a few years ago and they run a recovery of product but I did not my drive, so I want to know is, is it possible to run recovery without the disc?
(seems to me just don't forget the sound by pressing a few buttons)If so, how?
And if not what someone have any suggestions as to how I can restore the computer?Thanks in advance
Hello
> during a recovery of product, sometimes about 25% then emits an error at me and stops working.
As you mentioned, possibly recovery disk is defective, broken, or similar, this could be the reason why the CD/DVD drive is not able to read the disc and the installation breaks upward.
You cannot get this phone without the recovery disk! It is an old series laptop and it does not support the HARD drive recovery process, as do other mobile most recent.
If you have only two ways to install the Windows operating system; you need to use the Toshiba recovery disc (which seems to be broken) or you can install the operating system by using the Microsoft Windows XP disk.
If install you the operating system using the disk of MS original then you need to install the drivers of Toshiba which are placed on the European driver Toshiba page (look in the archives).
PS: maybe you could try to burn (copy) the recovery disk using another computer.
In some cases of the different drives are able to read scratched discs.
If you want to be successful and if you want to be able to copy the recovery disk, you can then use the new disk in order to restore the operating system on your computer satellite phone. -
Windows 7 not genuine after the restoration of backup_activation error 0x80070005
After a virus attack, I reformatted the drive and brought the whole system from a backup external drive (my drive C by BounceBack Ultimate clone).
I started from the external drive, then restored, all on the internal drive.
It was restored, but some programs (Microsoft Office and Photoshop) lost their activation.
Now, I get the message "Windows 7 Build 7601_This a copy of Windows is not genuine".
I tried all the ways to reactivate it, including 'slui.exe; slui 4 ", but still get access denied error code 0x80070005.
I tried many suggestions found on the web. Nothing has worked. I came across the error code 800 a 0046 during an attempt of "slmgr.vbs". Permission denied.
I tried to repair Windows by choosing 'upgrade' with the installation disc. But he won't because my current installation is newer (SP1 added).
I can't access a place to re - enter the product key. In the control panel; Watch Windows activation "status: not available;" Product ID:Not available.
I can't reach the activation of the phone either (slui 4 error, access denied).
I feel really stuck!
MGA report:
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Code of Validation caching online: 0x0
Windows product key: *-* - XGTMM - 3987Y-QH9YK
Windows product key hash: VEmrUbW4928uCwZDZHUDlYI2m0Y =
Windows product ID: 00371-177-0656641-85525
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {639C64B6-1BE8-477A-95CD-3D413A40530A} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.120330 - 1504
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\IEXPLORE.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: fast
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{639C64B6-1BE8-477A-95CD-3D413A40530A} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 32 *-*-*-*-QH9YK 00371-177-0656641-85525 5 S-1-5-21-1215590110-421537934-3858050354 Gigabyte Technology Co., Ltd.. GA-MA790X-UD4P Award Software International, Inc.. F5 20090603000000.000000 + 000CB853B07018400F2 0409 0409 Time(GMT-08:00) Standard Pacific 0 3 109 Content Spsys.log: 0 x 80070002
License data-->
C:\Windows\system32\slmgr.vbs(1131, 5) Microsoft VBScript runtime error: permission deniedWindows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
Beyond: 0 x 0000000000000000
Event timestamp: 5:17:2012 11:27
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current HWID of Hash: MgAAAAEABAABAAEAAQABAAAAAQABAAEA6GHGus6DVPLgqBiIEDOyRV72wo8qzyodQho =Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC GBT GBTUACPI
FACP GBT GBTUACPI
HPET GBT GBTUACPI
MCFG GBT GBTUACPI
SSDT PTLTD POWERNOW
TAMG GBT GBT B0Thank you very much for your help!
Download the SP1 update for your language and edition of the links on these pages...
Heidoc - Microsoft DR download links
The links are for downloads from Digital River servers run for MS, so are about as safe as you can get :)
Once you have downloaded, you then need to burn the DVD of it - use the Windows disc Image burner, or (even better) your favorite at the slowest possible speed burning application.
Note that you do NOT "drag and drop" the file on the disk, you must use the option "burn image" of your app - or you will end up with a useless coaster :)
Once you have the disc burned, check it to start the (or other) system OK - but do NOT start repair-you must start the repair of in a normal Windows startup.
Follow the instructions in this tutorial - http://www.sevenforums.com/tutorials/3413-repair-install.html?ltr=R
- and they should help you get through (it is not as hard as it sounds!)
Always ask first if you are not sure - either here, or on sevenforums.
Good luck with it!
The letter change is quite normal - don't you worry about this :) BUT you must start normal windows and start the upgrade of statement, or you will end up with a clean install.
-
Pavilion a6700f: Guest account is enabled, the computer less secure error?
Hello @czarg,
I understand that you are having problems with an error message in HP Support Assistance on the guest account. I provided you with a link to a post of @Daniel_Potyrala who successfully examined this question in his post here.
I hope this helps. Thanks for posting your question on the Forums of HP. Have a great day!
-
The restore Cd Acer is the CD of "Backup"?
I'm trying to restore my Extensa 4420 to the original. I have not bought the CD got Acer $$ a number of years, but now they have no interest in helping because my laptop is out of warranty.
After using the Sys CD #1 instructions require "backup" - CD. None of the CD set, that I purchased from Acer is therefore lableed. I have two disks in the system, a set of two CD 'Recover' and one 'restore CD. The instructions seem to ask randomly 'next' CD or a "Backup CD".
I tried 4 different combinations start and use of the CDs for the "next" CD diffΘrents The better with that I get is an error message
"The system registry contains invalid paths. Installation cannot continue. Image of this system has been applied without guaranteeing that drive letter assignments would be between computers.
How can I force the Acer CD to complete the restoration process?
Contacted Acer. They had not interest is help me solve the problem with their defective support other than suggesting I try and find a 2nd started to buy.
I eventually decided to remove all traces of the faulty Acer software from my computer
-
Original title: XP hang up to the restoration of the system during the installation
During the configuration of the system in the process of getting XP to hung up on the screen of the system restore
The message says:No changes have been made to your computerTo choose another restore point, restart System RestoreTo restart System Restore, click HomeThe jury of the mouse and the button doesn't work so I can't click Home tabHelpHello
Why you try to run the system restore?
Step 1: Check if you are able to complete the restore of the system in safe mode.
Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Reference:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=trueUnderstanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=trueProcedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427For more information, please see the following article.
Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP
-
Well, I typed my question in my title. I have had absolutely no problem under windows 8.1 to 12 items, but unfortunately the death of my laptop could not be repaired, so I had to get a new 8.1 one and that time windows was no longer available on the laptop I wanted. Who would have the go-getter, comparable to my old and able to handle my photography. SO I have an I7 processor 2.6 Ghz with 6 MB of cache and 16 GB of Ram with Windows 10 64-bit operating system.
As indicated above, while the Publisher will open the photos in camera raw, once I made my changes and try to "open image" I get the message he, "it cannot complete my request because an error occurred." I tried uninstalling and reinstalling several times with the same results. I made also all updates have been made. About 10% of the time, it will open up the photo, but then when I try to record it says that I don't have enough memory. Do not know how this can be, this configuration of the computer is basically the same as my other, only difference is windows 10. Not even close to a full hard drive. No other program running. Help!
reset your preferences - https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
-
Hello
I have a Pavilion g6-1103sa, with Windows 7, after a few problems of software I could just get to open in safe mode, so saving docs and images on a remote hard drive successfully, tried to complete a restoration of the system to the factory settings by pressing the ESC key on the switch and selecting the option to do so.
When the restoration is complete, the there is a message saying that the restoration was a success and the laptop restarts, however all that happensis a message appears saying: your computer is preparing for first use, but then nothing happens
What can I do now?
Hello dgreen1004,
Like the previous step to reinstall the OS from the recovery partition has failed, the only other option is to try a recovery media. Per your request, I am including information on how to get a recovery media. Please open the link following "Research drives HP recovery or a USB HP recovery disc?".
Kind regards.
-
Recovering the system for HP Pavilion Slimline s3307c fails
I recently bought the restore of the HP Pavilion Slimline s3307c disc because the hard drive recovery partition no longer works. I use the restore disc, the system recovery, said after the series of instruction to click Finish. When I cliquerai on complete, the system restarts, and it came to a point where I couldn't see any activity that happens in the computer except the icons two folder with the paper to the other folder. I'm frustrated waiting for two hours with no idea of what happens, not even a bar of progress... Please help... what to do? I called HP support, the person on the phone is not helping at all and told me to help!
Hello:
Sometimes, this can take several hours to complete the recovery process.
In addition, when you perform a system recovery, the only things that must be connected to the PC is the keyboard monitor and mouse. Nothing else must be connected (printers, speakers, etc.).
If the recovery discs fail to get the job done there is a procedure that you can use to install Vista on your PC if you can read all 25 characters of the product key windows on your PC case.
Here is the info on how to do this if you want.
If you are in a fault light but rewarding you can do yourself if you can read your product key of Vista on the PC of 25 characters.
You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.
Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."
The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.
The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.
When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.
I selected no, make the ISO file.
It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.
I tested both of them on my hp dc7100 CMT PC desktop computer, they worked perfectly.
When you enter the product key, he knows which version of Vista you have.
After you install Vista successfully, you can then install the drivers for your PC and driver page support.
Paul
Maybe you are looking for
-
OfficeJet 4215 all-in-one - changed the black cartridge. An old ink. Put in new cartridge. It has ink in since my finger is black. 1. connect to the computer. 2. attempts to print. -paper is empty. 3. cannot copy 4 responding to commands from the
-
Difficulty for the Windows Update 80070002 error code
Can someone help with the 80070002 error? I had Windows Update set to auto, and one day he's come until he could not update and gave the above error code. I tried all the answers currently on this forum (and others) without success. I tried; Deletin
-
iPod nano (3rd generation) used to synchronize with Itunes on a XP computer
I have an Ipod nano 3rd generation that seems to have stopped. The only thing I see on the screen is the apple logo. I tried to reset a dozen times (at least) and installed the latest version of Itunes, but nothing helped. I do not see the ipod appea
-
game will not be resolved in full screen.
am running windows Vista and had an old version of scrabble. All of a sudden it will not maximize the full screen. You press on maximizing and there still about 1.5 inches on all sides. I played with all the properties, screen resolutions, but
-
Hey there BB10 dev device owner, can quickly check and see if it is possible to copy and paste a photo/image in BBM, text or e-mail message? I checked via the Clipboard API I am successfully load a picture on the Clipboard, but I make a big assumptio