Upgrade your wireless Y510p to Wifi AC adapter

Similar Questions

• WiFi IEEE 802.11N/G/B Wireless USB 2.0 Wireless Lan USB Adapter WIFI 150Mbps adapter network driver

  where can I find the driver for my wireless card? Here is a link to his http://www.amazon.com/Wireless-802-11N-150Mbps-Network-Adapter/dp/B00333F2YU/ref=sr_1_8?s=electronics&ie=UTF8&qid=1364471402&sr=1-8 description

  Hi Brian,.

  Thanks for posting your question in the Microsoft Community forum. I understand that you want a driver for the wireless card. I'll help you with this problem.

  We can refer to this article and check if that helps.

  Install a wireless network card: http://windows.microsoft.com/en-in/windows-xp/help/networking/install-wireless-network-adapter

  Feel free to post your request here on the Forums of Windows, we would be happy to help you.

• Message from Microsoft Windows Error Reporting that says: upgrade your display adapter graphics card does not support DirectX 9.0 or newer

  I have a message that says Microsoft Windows Error Reporting: upgrade your display adapter graphics card does not support DirectX 9.0 or newer.  My screen blanks outs initermittently and icons on the desktop are very grainy? all patches, easy?

  Hello

  
  Perform the steps in the article and see if the problem persists
  http://support.Microsoft.com/kb/283658
  
  Hope that helps.

• Address a problem with your LOCAL WIFI card__Your network card has stopped working properly .___To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer. __ __

  A problem with your wireless network card Your wireless card has stopped working properly. To see if an updated version of your WLAN card is available

  Hello Jeroen Ratz,

  You should visit your computer manufacturer's website to download all updates for your hardware. Never leave the windows update utility, update your hardware to your computer. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Machine E says there is a problem with the microsoft virtual WiFi Miniport Adapter driver

  We changed the BT home hub-2 optical fiber broadband home hub-3. Since that I can't connect to my Epson 600 series printer wirelessley more. When going to add the printer in devices, he showed a problem with my e-machine. Re - install the driver does not solve the problem. any ideas?

  Hello

  What is the operating system installed on your computer?

  Please uninstall and reinstall the virtual WiFi Miniport Adapter and check if it works very well.

  a. press the Windows key + R

  b. in the Run dialog box type devmgmt.msc, and then on enter.

  c. expand network connections.

  d. right-click on wireless connection

  e. click Properties.

  f. click on Virtual WiFi Miniport Driver and click on uninstall.

  g. restart the computer.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Microsoft virtual WiFI miniport adapter has adriver problem

  does anyone know how to fix Microsoft virtual WiFI miniport adapter has adriver problem

  Hello

  Control Panel - Device Manager:

  You can double-click it - tab drivers - DISABLE (that is if you do not use this feature).

  You may not have that unless you try to connect to other WiFi devices via your computer and
  many WiFi devices and their drivers do not correctly support the virtual pilot.

  Check with the manufacturer of system and/or support updated real manufacturer Sites and WiFi device drivers.
  (Which is also updating the driver virtual.) If no new drivers WiFi are available then re - install the present
  one.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network card (NIC) and is a good time to get the other updated drivers as
  Windows 7 like the updated drivers.

  ==================================================================

  More information on what WiFi devices a virtual: (as noted above, if the device or the driver is not
  support the virtual device or is not required then it can be disabled).

  The WiFi device and the driver is installed must support a Virtual WiFi configuration. Check with the system
  Manufacturer support, their documentation online and drivers and ask in their forums (if any) known
  questions. If the wireless device is supported for OEM sound drivers, visit their site for updated drivers and
  known issues (Intel, Realtek, LinkSys and others).

  Windows 7 adds native Virtual WiFi from Microsoft Research technology
  http://www.iStartedSomething.com/20090516/Windows-7-native-virtual-WiFi-technology-Microsoft-research/

  How to setup virtual Wifi in Windows 7 without any additional software
  http://www.Blogsdna.com/5506/how-to-setup-virtual-WiFi-in-Windows-7-without-any-extra-software.htm

  Connectify allows possibility virtual WiFi in Windows 7 machines
  http://www.geek.com/articles/news/Connectify-enables-virtual-WiFi-ability-in-Windows-7-machines-2009112/

  On the wireless network hosted
  http://msdn.Microsoft.com/en-us/library/dd815243 (vs.85) .aspx

  Build a Wireless Home network without router - see Windows 7 section
  http://www.labnol.org/software/wireless-network-without-router/11494/

  Transform Windows 7 into Wifi Hot Spot with Virtual Router free tool
  http://News.lehsys.com/2009/11/turn-Windows-7-into-WiFi-hot-spot-with-virtual-router-free-tool/

  =========================================

  3rd Party Solutions

  Connectify is a software easy to use for Windows 7 computers router.
  http://www.Connectify.me/

  Virtual Router - Wifi Hot Spot for Windows 7 / 2008 R2
  http://virtualrouter.codeplex.com/

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Microsoft Virtual Wifi Miniport Adapter has a driver problem (Code 31)

  Hello I have a small question. It started by I first went to devices and printers and the choice to add a device by mistake. When I saw that I cancel what has led to the blue screen. After that, my computer restarted by itself and asked me that if I wanted to run windows normally choice run windows normally. Then I loged in and told me your computer just a restore from an unexpected shutdown. Later, I noticed that I had a troubleshooting and it said that Microsoft Virtual Wifi Miniport Adapter has a driver uncorrected problem also peripheral Pnp. I tried to go to Device Manager and update of MCWMA, but he said he has not set. What should I do to solve this problem, because im starting to get worried because it is a new computer. Some of my other question about what is Microsoft Virtual Wifi Miniport Adapter and do I need because I can connect to the internet fine wireless. Thank you for trying to help me I really appreciate it.

  My operating system is Windows 7.

  Hi John546,

  Thanks for posting. Proceed as follows to see if your problem persists. Open the Device Manager, under network adapters do a right-click on the Miniport Microsoft Vitural WiFi card and choose disable.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Microsoft Virtual WiFi Miniport Adapter driver problem

  Hi guys,.

  I have a problem with the Microsoft Virtual WiFi Miniport Adapter, see the image below, please help,

  all the best, bluesfloyd,

  

  Hello

   
  Thanks for posting your query in Microsoft Community.
   
  1. what exactly is the problem you are having with your system?
  2. What is the brand and model of your system?
   
  Microsoft Virtual WiFi Miniport adapters are hosted wireless network drivers that assist in the virtualization of a physical wireless adapter in more than one sometimes referred to as Virtual Wi - Fi virtual wireless adapter. If your system gets an update for Microsoft Virtual WiFi Miniport adapters and you get an error Code 31 in Device Manager, it means the device has no a way.
  Error codes in the Device Manager in Windows - 31 of the Code
  http://support.Microsoft.com/kb/310123/en-us#31
   
  Please try these steps and check if the problem persists:
   
  Method 1:
  Run the hardware troubleshooting tool.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us?EntryPoint=lightbox
   
  Method 2:
  1 open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  2. in the list of hardware categories, find and develop network adapters , select the device for Microsoft Virtual WiFi Miniport Adapter driver you want to update, and then double-click the device name.
   
  3. Click tab driver , click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
   
  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Hope this information is useful. If the problem persists, please post back with your results for further assistance, we will be happy to help you.

• Microsoft Virtual Wifi Miniport Adapter missing

  L.S.

  I would like to create a hotspot on my Windows computer. Windows supports this and he needs the Microsoft Virtual Wifi Miniport card for this. The question is this:

  I don't see Microsoft Virtual Wifi Miniport Adapter in my device management.

  I tried the things:

  (1) checking the section "hidden devices" in device management. He isn't here.

  (2) update the my wireless (Netgear A6210) network card drivers to the latest version.

  (3) update the drivers of my network card wireless (Netgear A6210) to the first version available.

  (4) reinstall the drivers of steps 2 and 3.

  (4) the execution of a number of commands that search on Google, I found:

  "command netsh wlan set hostednetwork mode = allow."

  "netsh wlan start hostednetwork" (which made me an error - sorry for the Dutch: Het gehoste kan niet worden gestart netwerk.)
  Of bron has right status aangevraagde bewerking ITU om niet groep you voeren.)

  "command netsh wlan set hostednetwork mode = allow ssid = NameOfNetwork key = StrongPassword".

  "command netsh wlan set hostednetwork mode = allow ssid = NameOfNetwork key = StrongPassword".

  (5) install the drivers of VirtualWifi, which landed me an error:

  C:\microsoftmeshwifivirtual\VirtualWiFi\binaries>VirtualWiFi.exe install

  VirtualWiFi driver installation...
  Cannot complete the action.
  Error 800f0203
  Problem-2146500093 VirtualWiFi driver installation.

  ------------------------------------------------------------------------------------

  I am solutions now and I need help for other steps I could take.

  Thanks in advance!

  Wifi miniport exists only after you have successfully put in place a network hosted - it is a virtual device.

  If you can, it would be interesting to restore an image system before all your attempts - just to make sure there is no debris around to stop you from your repeated procedure.

  The following documents have been cut & pasted directly from the windows command prompt, I used successfully implemented and use this utility [in Windows 7 and Windows 10].  I mention this because when I wanted to find out more about the fact that I discovered a lot of rubbish, written by people who had either never tried & have been incorrectly copy of notes from someone else or they were just of their inaccurate memories.

  1 you must first verify that your WiFi card is capable of this job.  Enter elevated command window

  netsh wlan show pilot

  and check that the entry

  Hosted network supported: Yes

  appears in the results.

  2 WiFi must be enabled until you issue the following command [it didn't need to be connected to anything]

  netsh wlan start hostednetwork

  and then you should get the answer

  The hosted network began.

  [If you do not have WiFi you this answer - the hosted network could not be started.]  [A device attached to the system is not functioning.]

  3 Once you are happy that you have found the right answer, then stop the network

  netsh wlan hostednetwork stop

  4 then start it for real with a SSID & password

  netsh wlan set hostednetwork mode = allow ssid = TestNet key = password

  and you get the answer

  The hosted network mode has been defined to allow.
  The SSID of the network hosted has been changed successfully.
  The user key hosted network password has been changed successfully.

  5 you can restart [you will have to do at each reboot of the system - there is no need to keep entering the SSID and password the system will just continue to use those you put in during step 4 above].

  netsh wlan start hostednetwork

  6 you can also get some info on how it works with

  netsh wlan show hostednetwork

  I just checked these settings to see what security was that I couldn't connect to my WinXP [but not connected as well a computer Win10 & hotspot a phone]

  7 these are the guides who helped me with my experience in the implementation of Windows 7 to a hosted network.  They go beyond my notes do, they understand the configuration of ICS.

  create wifi hotspot [a thread in this forum]

  How to create setup virtual Wifi in Windows 7 without any additional software

  Errata security Windows 7 includes soft-ap

• Microsoft Virtual Wifi Miniport Adapter

  I have 2 toshiba NB305 netbooks. 1 has the Microsoft Virtual Wifi Miniport adapter listed #2 in the device under network adapters Manager. I don't know why but it minimizes my wifi range as other otherwise works fine. How uninstall it permanently, I did a right click on it and select uninstall - press ok when it asks me if I'm sure that - he disappeared, but when I restart it back.

  Hi KrystalOMGURAT,

  Please see the following information about uninstalling Virtual WiFi, from the following link:

  http://research.Microsoft.com/en-us/UM/Redmond/projects/VirtualWiFi/software_faq.htm#uninstallfaq

  VirtualWiFi uninstall

  Q: why I can't uninstall VirtualWiFi? The uninstall command seems to hang.
  A: This happens if the VirtualWiFi service is not running. To start the service, either run "net start VirtualWiFiService", OR "VirtualWiFiSvc.exe - start'." " VirtualWiFi Service is not installed, could you install using 'VirtualWiFiSvc.exe - install'. "

  Q: is there a manual way to uninstall VirtualWiFi?
  A: Yes. Click Start-> Control Panel->-> wireless connection, network connections, right click and and go to properties. Click the VirtualWiFi Miniport driver and click on uninstall. Note that the VirtualWiFi Service must be run at this time. Once the driver is uninstalled, you must remove the service by running ""net stop VirtualWiFiService '', followed of "VirtualWiFiSvc.exe - remove". "

  Q: I can't uninstall VirtualWiFi. Nothing seems to work. Is there a brute force method?
  A: Yes. Go to the Windows registry by using start-> Run-> 'regedit '. Note that modify you the registry at your own risk. It is always best to save a copy of the registry before you edit. The registry, search for all entries having VirtualWiFi, and delete them. This is best done in safe mode. Also run 'VirtualWiFiSvc.exe - remove' to remove the service. We have provided an easier way to remove these registry entries. Follow these steps: (i) the term "VirtualWiFi uninstall" (ii) reboot your machine (iii) Run "RegDelete. Note that you need to remove a single entry manually, who is invited by RegDelete. (iv) reset, and you're all set! However, please use RegDelete carefully. Carefully check the entries which RegDelete invites! It should not belong to another program and correspond to the README.txt file in the directory of RegEdit under Sources.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Microsoft Virtual Wifi Miniport Adapter (code of erro, 10)

  Microsoft Virtual Wifi Miniport Adapter (code of erro 10) can not but connect o Nao laptop com o celular Bluetooth e no message control diz o device esta com problema, o driver e a versão 6.1.7600.16385 21/06/2006; e em propriedades mostra a mensagem (Este nao pode ser implies device. ((Código) 10).

  Não encontro uma versão but recent Uso Win 7 64 bit

  Modelo do laptop: HP G42-373BR

  Wireless hardware:

  Broadcom 4313 802.11b/g/n (ok pilot) Version 5.60.350.11 / Date 05/07/2010

  Realtek PCIe FE Family Controller (ok pilot) Version 7.46.610.2011/ Date 06/10/2011

  O Unico com problemas esta sendo o driver card Miniport Microsoft Virtual

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
  http://support.Microsoft.com/common/international.aspx

• Cannot share Internet on Microsoft Virtual WiFi Miniport Adapter

  Hello;

  I have Windows 7 Home Premium. I used to share Internet to my laptop via a virtual WiFi router with the following command.
  netsh wlan set hostednetwork mode = allow ssid = MySSID key = My8DigitKey

  netsh wlan start hostednetwork
  
  
  then share the connection from the control panel > network and Internet > network connections > right button connected Modem > Internet sharing connected the modem to connect to the network wireless 2 (Microsoft Virtual WiFi Miniport Adapter)
  For somedays, it worked well. But now it is not. Now, it starts the virtual router and I can connect my device (phone), but can not browse the internet from the phone.

  In my short experience using hostednetwork wireless you need not to use ICS, which I believe you are trying to use. Just Setup and start hostednetwork function manually or with a third party app such as Connectify and Virtual Router and connect your wireless device, IE. iPhone or iPod Touch, or whatever.

• Microsoft Virtual WiFi Miniport adapter connection with "no internet access.

  Microsoft Virtual WiFi Miniport Adapter missing (hostednetwork starts but cannot connect devices)

  I upgraded my Windows 7 to Windows 8 Pro and everything worked fine, I was able to host a wifi network using the command "netsh wlan. I have a htc x, it successfully connected to the wireless network on my laptop via the netsh tha.

  But earlier, I have no idea of what happened but no device (for example, my cellphone) is able to connect to the wifi/hostednetwork hosted on my laptop.

  He sees the connection, but still hung on access to 'internet '...

  netsh wlan set hostednetwork mode = allow
  netsh wlan set hostednetwork ssid keyUsage = HP = key persist = "abcdefgh" mode = enable
  netsh wlan start hostednetwork

  I use this command virtual wi - fi with success with 'no Internet', I created...

  someone can help me...!

  Hey,.

  Visit this link:

  http://msdn.Microsoft.com/en-us/library/dd815243 (vs.85) .aspx

  If you had installed drivers of the network up to date maps, remove this update. It worked for me.

  Check the steps to remove the software update:

  ·        Go to the Control Panel and open Windows Update.

  ·        On the left side, at the bottom of the window, click the installed updates link.

  ·        In the next window, scroll down and select the update of the NIC has installed recently.

  ·        At the top of the window, click the Uninstall button.

• Microsoft Virtual WiFi Miniport Adapter missing (hostednetwork starts but cannot connect devices)

  I upgraded my Windows 7 to Windows 8 Pro and everything worked fine, I was able to host a wifi network using the command "netsh wlan. I have a htc x, it successfully connected to the wireless network on my laptop via the netsh tha.

  But earlier, I have no idea of what happened but no device (for example, my cellphone) is able to connect to the wifi/hostednetwork hosted on my laptop. He sees the connection, but still hung on authentication / "obtain an ip address" phase and sometimes loops around that. While this same cell phone is able to connect to wifi hosted on the laptop from my friend, via the same netsh command, also it connects fine to routers wireless etc.

  I noticed that in my network connections section, "Microsoft Virtual WiFi Miniport Adapter" has disappeared. I tried to run the command

  "netsh wlan set hostednetwork mode = command not allow."

  and then

  "command netsh wlan set hostednetwork mode = allow."

  but nothing is done, the virtual wifi adapter doesn't seem to be back. I've updated my drivers for wireless card that is "Intel Centrino Wireless - N 1030 BGN". But still no change, map of miniport does not return. Then I ran the cmd command "sfc/scannow", in the hope that maybe some file is corrupted and he could get fixed, but even after checking and restarting, it was still no effect on wifi.

  So, basically, that is what is happening, I run the command

  "netsh wlan set hostednetwork ssid = keyUsage htc = key command persist = mode abcdefgh = enable".

  and it will

  "Hosted network mode has been set to allow.
  The SSID of the network hosted has been changed successfully.
  The user key hosted network password has been changed successfully. »

  Then I run

  "netsh wlan start hostednetwork.

  and it will

  "The hosted network began.

  But in my network connections section, "Microsoft Virtual WiFi Miniport Adapter" does not appear, instead when the connection is started, "Microsoft hosted virtual network adapter" appears and disappears when the hostednetwork is stopped. But nevertheless, no device is able to connect to this hostednetwork, stuck on authentication / phase "obtain an ip address", as a DHCP server is missing or something.

  Kindly, help me out I searched on internet a solution for almost 2 days now, but nothing helped.

  Abdoulaye.

  Follow the links and check

  http://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/566a63d9-a5f8-4210-a5ee-48411425f5c3

  http://social.technet.Microsoft.com/forums/en/w7itproui/thread/86ab166f-0d3d-4b9b-ad7f-4b840221ac33

  http://www.SevenForums.com/network-sharing/14593-Microsoft-virtual-WiFi-miniport-adapter.html

  http://helpdeskgeek.com/Windows-7/what-is-Microsoft-virtual-WiFi-miniport-adapter/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Microsoft-virtual-WiFi-miniport-adapter/cccc143a-2fa8-41EF-B4C5-20cc233c2720

  http://msdn.Microsoft.com/en-us/library/dd815252 (vs.85) .aspx

• Can I put my Broadcom BCM43142 wireless with a compatible ac adapter?

  Hi all

  I got a Sony Vaio SVF15A1C5E 2013 with a Broadcom BCM43142 wireless adapter.

  Searched the forums and found a lot of people ask questions about the upgrade to the compatible adapters but I couldn't find an answer or a discussed topic map Broadcom.

  Y at - it a compatible adapter for my laptop?

  Thank you!

  Mike

  Hi mdebeum,

  Thank you for visiting the Sony community!

  Thank you for your time to post your question here, unfortunately we are unable to confirm that since your Vaio SVF15A1C5E is not an American model , and we do not have the full details on the specifications. It is also possible to upgrade the wireless card, but there is no guarantee that it will work without any problem. Usually, we recommend that you replace the adapter with the same model, only not to be upgraded with a superior specs or different model.

  For further assistance regarding your concern, please recommend to visit our Sony Global Web site for more information on contacting Sony's Support Center in your area at http://www.sony.net/SonyInfo/Support/.

  Kind regards

  Vincent

  If my post answered your question, please mark it as "accept as a Solution.