Upgraded from Windows XP to Windows 7 and can't read the activation code

Similar Questions

• IM using Windows XP Profesional, can I upgrade to Windows 7 and what would be the cost?

  upgrade windows xp to windows 7

  IM using windows xp profesional can I upgrade to windows 7 and what would be the cost? what I have to put all my files on an external drive then uninstall windows xp then put in windows 7 then put back my files? is that how its done? Thank you.

  First the cost, you must know if your hardware can support Windows 7

  In General win 7 should a minimum og 1 gig of ram (for 32 bit) or 2 for 64-bit, and it needs a video card 256 MB or greater.

  If your less and can not be updated it may be best to start thinking about a new computer.

  If the above is ok there are various offers for win 8, but make sure you buy form a reliable site of Ms.  There are a lot of current scams.

  Good luck

• I have an OEM of Windows Vista version on a dying computer. Can I buy the upgrade for Windows 8 and install it on the new PC, I'm building?

  I have an OEM of Windows Vista version on a dying computer. Can I buy the upgrade for Windows 8 and install it on the new PC, I'm building? The upgrade, is published at the same time as I'm rebuilding my PC. I'm just looking to replace my OS. I need Vista.

  Hello

  OEM license is tied to the first machine that is installed on the OEM license dies when this machine dies.

  An OEM license is not transferable.

  And you need a legal edition of Windows, enabled for upgrade.

  There is no use, you buy a license upgrade of Windows 8 by itself as you have to upgrade anything of in the new computer, you build...

  You can buy a license of Windows 8 when it comes out later this year.

  See you soon.

• I've upgraded to windows 7 and can't get my motion eye camera work

  I've upgraded to windows 7 and can't get my motion eye camera work

  Go to the Sony website and find your model of PC in the support section. Now download the Windows 7 drivers for the camera (assuming they exist) and then install the drivers.

• I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR

  I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR, I never had this problem before there was a sort of update that could from cause?

  What is the destination folder that the date be underneath?  In the top right it says users who suggests, you try to put the photos on top of your username instead of under your username.  Maybe that's the problem.  So change your folder in the drop-down list at the bottom right of what it should be rather than users, and if you're going to show us the destination of your photos at least scroll through the list of folders down right so that we can see which is the white highlight.

  Here is how mine looks like if I want to put my photos imported under my subfolder users - Steve - photos by date:

  

• Manually reinstall Windows XP and can not find the product key.

  Manually reinstall Windows XP

  Manually reinstall Windows XP and can not find the product key.
  What to do to replace the product key.

  Where to find your product key
  You can find your Windows product key on the label supplied with the package provided with your copy of Windows. The label can also be on your computer case. Activation of the pairs with your computer, your product key.
  Lost or misplaced product key (certificate of authenticity)

  http://support.Microsoft.com/kb/824433

  How to get a replacement product key?

  To replace a Microsoft product key, you must contact Customer Support and Microsoft. To locate the phone number, visit the following Microsoft Web site:

  http://support.Microsoft.com/default.aspx?scid=fh; EN-US; CNTACTMS

   

  For more information on this topic, visit http://support.microsoft.com/kb/811224

• I have a hp scanjet 3400C, but im running windows 7 and can't find the drivers anywhere any help please?

  I have a hp scanjet 3400C, but im running windows 7 and can't find the drivers anywhere any help please?

  I have a hp scanjet 3400C, but im running windows 7 and can't find the drivers anywhere any help please?

  Hello

  It seems that the latest HP published for this model scanner drivers were for Windows XP.

  Software & Driver Downloads Scanner HP Scanjet 3400C - HP customer service:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=61835&task=&

  You can check in the HP Forums for other users who may have solved that problem.

  HP Support Forum - HP Support Forum: http://h30434.www3.hp.com/

  24/7 Online supports for the House and special products of HP:

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&cc=us&DLC=en&lang=en&product=top

  Concerning

• Trying to activate my new Adobe CS6 software and he said that the activation code is invalid, trying to activate my new Adobe CS6 software and it shows the activation code is invalid?

  Trying to activate my new Adobe CS6 software and he said that the activation code is invalid?

  Make sure you use the correct number, find the serial number of your product Adobe quickly and make sure the installation file and serial number match, error: "serial number is not valid for this product". Adobe Creative Suite

• Upgrade to Windows 8 and put to update the driver now no sound

  I upgraded to Windows 8 recenrtly and downloaded the last "HD audio driver HP".  Now I have no sound for my laptop.  The only time where my speakers work are when I select the audio test wizard HP support option.  Any help gratefully received!

  My product number is LS499EA #ABU.

  Thank you

  Mark

  Have you tried installing the driver from Windows 8 for this PC?

  Please download and install from the following link:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58727.exe

• Upgraded to Windows 7 and had to replace the motherboard. Now can't activate Windows 7

  I have upgraded from Vista to Windows 7 on my desktop Gateway in 2009. I just had the motherboard replaced and had to reload Windows 7. I reinstalled it as new instead of upgrading. Now I can not activate my key to Windows 7 upgrade. What can I do?

  Yes, you can purchase a copy full of the same edition of Windows is installed, and install the key by using the option change the product key.

  The quckest to do (not necessarily best) is to buy on Microsoft Store - they will email a key that you can use immediately.

• HP laserjet 4100n - printing garbage after upgrade to Windows 8 and can not network

  Hi everyone - I've recently upgraded to a new PC in Windows 8 and I have terrible problems with my printer HP Laserjet 4100, which worked perfectly before XP.

  Question n ° 1

  I had to get a parallel/USB cable to connect the printer and you can see after downloading some drivers of my PC and I can print - but every now and then it prints garbage to half way through a document/print run.  Someone has experienced this problem and if so how to solve?

  2nd edition

  At the time where the printer is a stand-alone but I want this printer to network, but no matter what I try I can't be seen.  I printed the configuration information and it shows me what I need, but I when I try to add it it just can not be detected.  What I am doing wrong?

  I was able to add a Lexmark laser printer at the independent address and I've also linked it with no problems at all.

  Any advice (as simple and in English) would be greatly appreciated.

  Reset the cold of the printer. Turn the power off. Hold down the green button while turning on the printer up to cold appears in the window of the menu. Liberation and the printer will come on loan. Wait about 1 minute after a ready appears, and then print the config page again and see if the address has changed. Even if this is not the case, go to a prompt on the computer and see if you can ping the address.

• HP 2000 369WM reinstalled windows 7 and can't get the wireless to work

  My laptop is the 369WM of 2000 hp and I had problems, so I reinstalled windows 7. Come to find out that I can't get the drivers from the hp support site to work. My network controller IDS are

  PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C & REV_00
  PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C
  PCI\VEN_1814 & DEV_5390 & CC_028000
  PCI\VEN_1814 & DEV_5390 & CC_0280

  So I was wondering if somebody could helpme out. I can not turn on button F-12 (wifi) or still does not reach my home wifi without using my wireless desktop usb thing (which is temporary), I saw a few posts of the forum on the ID and having a card or something, but I didn't know what to do.

  Thanks in advance, Austin

  Hi, Austin:

  Here is the link to the latest version of the driver for the card your laptop Wireless:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-116957-1

• During the upgrade of Vista SP2 to Windows 7 (including SP1) my keyboard is no longer in effect. How can I enter the activation code?

  I'm in the process of upgrading to Vista SP2 (32 bit) to Windows 7 (32 bit) via DVD.  I saw that the process was going to take top one some time and went to sleep with the assumption that activation code window waiting for me in the morning.  Well it's here, but my USB keyboard does not (as no functional mouse).  I can't enter the code.  Does anyone have any ideas on how to approach this?

  Press the power button, once, energetic and very slightly (do not press the button). If the PC is in sleep mode, it should wake him up.

  J W Stuart: http://www.pagestart.com

• After that an update of Windows can not hear noise and can't read the DVD

  I downloaded updates Windows today and now I can't hear any sound and my laptop will not read the DVD. Any ideas?

  There are a couple of Microsoft FixIt automatic that might help with your problem.

  Troubleshooting problems of CD/DVD.
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  Troubleshooting sound problems:
  http://support.Microsoft.com/mats/NO_SOUND/

  Let us know if these help you with your problem.

  Thank you

  Marilyn

• Trying to get my $18 update of the recently purchased Windows 7 to Windows 8 and can not find the record ID number

  Page updated MS asks for 'Registration ID or reference ID'. Where Devil can I find that?
  There are 4 digits on the OEM sticker on my computer - none of those who worked.
  Nowhere on the page Web MS does say where to get the ID.
  I googled and can't find where to find.
  I tried Win 7 product ID of my computer - no dice
  Help!

  I found the solution.
  I was on the page:
  http://windowsupgradeoffer.com/en-au/home/ProgramInfo
  The only way forward from there was to select a menu "My order" item, which asked for a record ID.
  I rang MS and the guy went to the same web page and at the bottom was a continue"" button. Not on my browser then or since. He and I were using FireFox. (Yes a tech MS using FF!). He guided me to the registration site directly using the url:
  https://windowsupgradeoffer.com/en-au/registration
  Once there, I could register for the upgrade. Once which was finished, I got one - wait that he - a "registration ID".
  Thank you all for your comments, much appreciated.