Upgraded Windows stuck 10 to 99% still once, and now it has exceeded the deadline
Hello
So I tried upgrading my laptop for windows 10 several times. It updates and then installs and is going slower and slower the higher percentage it gets. Once at 98%, that it takes 2 hours and 99% it keeps going. I have never run for more than 5 hours arriving at 99% until today, since it was the last day, I could upgrade for free. He is currently still 99% after running for about 20 hours and not come with an error message at all. So my question is, can I still get the free update now if this does not work, and how can I solve this problem.
It is an Acer Aspire 5552 G 64-bit Windows 7 Home premium service pack 1. I can see there are a couple of uninstalled windows updates, it would be useful to them to install first? And if so, can I I re - run the upgrade now that the deadline for the free update is complete?
I am a somewhat advanced user, if we need to change reg keys or pasting of the cmd commands is no problem.
Best regards
Duus
If the upgrade of Windows 10 Assistant becomes blocked or unresponsive to different percentages: 0%, 32%, 62%, 87%, 99%, please wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.
How to download official Windows 10 ISO files
How to: upgrade previous versions of Windows using the file ISO for Windows 10
If Setup did not complete in time and you are experiencing activation problems. Contact technical support Chat after installing Windows 10 is over. Click Start > all Apps > contact technical support. Explain your situation to the agent of cat.
Activate your Windows 10 license with Microsoft Chat support
Tags: Windows
Similar Questions
-
Update Windows xp caused my computer blue screen and now will not start.
Update Windows xp caused my computer blue screen and now will not start. There has been no change to my system hardware or software otherwise. After that windows update Setup, he asked to restart the computer. When restarted, the computer screens and past blue to the quick menu for safe mode and last known configuration to work. None of these mode of work, not to shelter or otherwise. The only thing that he will now implementing market is quickly flashing the blue screen and restart once again to this quick menu.
It's really annoying because I have important files on this computer work and can't afford to get in shape! I put my confidence in using windows and keep it updated. During the installation of your updates, it made my system fails and does not restart. I'll be very upset if this update of windows xp causes me to have to reformat and lose important files!
Any advice on a solution? I need to get this computer work as soon as POSSIBLE.
Ben River
I ordered the Dell XP disc and did the re-install. It works fine now. The Dell technical support had me do some updates on the web as well. I have not had problems since. What happened with the automatic updates completely wiped out my operating system. At least I don't have to buy a new computer.
If nothing else works, try reinstalling your operating system. It worked for me.
-
I did a reset on my iPad 2 and now it has an error message when I connect to my computer to access the backup. bed the error message, this iPad cannot be used because it requires a newer version of iTunes. How to upgrade the version of the ipad?
Take a look at the article, download the latest version of iTunes - Apple Support
-
How can I get a card code iTunes pass go throu that is stuck on a peel off sticker and I don't have the receipt for refund or Exchange
You can try to contact iTunes support, they are likely to want to see images of the front and back of the card, and they might also want to see a picture of the reception (you looked for the reception?): https://www.apple.com/emea/support/itunes/contact.html
-
don't have the disc anymore so I need to reinstall Windows XP pro sp2 but no disc and there is nothing in the partision
Hello
Thanks for posting the question in the Microsoft Community!
You can't use the computer and reinstall the operating system.
To help you better, we need more information.
1. What do you mean by computer crashed? Do you get any error messages?
2. is the computer, a laptop or desktop?
If you use a laptop, you can contact the computer manufacturer to get an installation disc.
If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.
-
I reinstalled Windows XP service pack 2-64 bit and now I am unable to get the Windows Update
I reinstalled Windows XP service pack 2-64 bit and now I am unable to get the Windows Update. Updates are more automatic since the installation and now I get the following message if I try to update manually. Help!
The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options:
To support options:
- Microsoft online assisted support (no cost for Windows Update issues)
SP3 is only for 32-bit versions of Windows XP. OP has the 64-bit version of XP Pro...
-
How do I change my date of birth in the profile because I mistakenly put 2011 instead of 1970 and now I can use the e-mail due to parental control?
Hello
The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.
-
Recently installed the version of Windows Media Player, 11.0.5721.5280 and now whenever I play a piece PC stutters on audio producing a constant noise and freezes. Help, please!
I suggest that you try to update the audio drivers to their latest version. Don't simply check Windows Update, but the site of the manufacturer of the sound card as well.
-
I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.
Need help.
Hello
Please see the link below.
Hope this will help you.
Kind regards
Hervé Khare
-
I upgraded to ESXi 5.0 to 5.5 ESxi now when I ping the esx host, it fails.
I was able to ping before the update. Test management system also fails to ping the default gateway.
I sent a private message you, could answer you on this one here? Got iso's, he's now testing in my lab, but I don't have that kind of network cards, you will need to do the real test for me.
-
Configuration of the Windows stuck at 67% updates then restarts and the entire process loop
Original title: configuration of updates
My computer starts to try to configure Windows updates immediately I turn it on and gets to 67% and no further. Finally, it restarts and start the process again without success. All this takes 11/4 hours before I can connect on the Internet. This happens only in the last 3 days.
Hi didi45,
1. the updates Windows tried to install?
2. don't you make changes to the computer before this problem?
You can read the following article and try the steps.
The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
After upgrading from Vista created a new documents folder and now ignores the original
Last week I updated my computer (which I believe has an update of the graphics card and some windows stuff) using Windows update and left while he was closing. I guess what he finished close, but as I was leaving for the weekend, I can't be 100% sure and this weekend my house loses power at least once.
As for the problem, at windows startup today made first time setup that works normally when you connect to a user account for the first time. Applications of Sidebar by default loading, the default value of the user interface (that I don't use, so it was the first sign), and I found that on the opera opening, all my favorites and settings were gone.
At the opening of my documents, I found that they were completely empty of content, including all hidden folders where all of my settings the user should be.
Navigation around the computer, I find that this will C:\Users\USERNAME\ my documents are still intact, but are ignored, with all the shortcuts leading to my documents redirect me to the 'new' documents folder, which means that for all purposes useful all my user settings for all programs that store data in the documents have been reset.
Maybe someone has an idea of what may have caused this? Personally, it's one of the strangest bug I've ever seen in any version of windows, and I'm not sure how I should go to deal with it.
Update:
To check the path of the 'new' documents folder, it appears as C:\Users\TEMP
This means at least all of my original documents folder has not been deleted, but I'm trying to support everything up to an external drive where vista decided to replace my old documents folder entirely.
Hello
You can perform a restore of the system on the computer to restore the previous settings again.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
For more information follow the link below.
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
Once you've done the system restore perform the update of Windows once more and check what is happening.
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows 7 x 64 ultimate program slow and constant sickly breaks down, the material is all good
Just from Vista to Windows 7 that I have installed my new components and it is the worst decision I've ever done to PC. Everything started with the problem that my new MK-85 QPAD got stuck on a key (s) so I had to reboot my PC to 1/3 of all bootups, a problem that has never taken place in Vista. That * has gone, but now I'm going with an SP1 fully updated, affected by serious f * cking issues, make me want to throw the piece of sh * forever away from t. Specifications: * Gigabyte GA - X 58-UD3R * i7 930 @ 2.93 GHz Corsair H100i, never the tracks above + 40ºc, hyperthreading enabled. PCB runs at about 50-55 ° c * 12 GB DDR3-1333 * 510-120 GB Intel SSD * Samsung HD501 - 500 GB * nVidia Geforce 8800GT 512 MB * XFX Core Edition 450W * Windows 7 X 64 build 7601 problems: * Internet Explore 10 (regardless of the x 86 or x 64) instantly crashes in 9 of the 10 times open. * Taskbar crashes when connecting to a network. * Control Panel crashes when connecting to a network. * WIRELESS card becomes unusable for a minute for 5 minutes, the network is fine. * Third-party gadgets opens 3-5 minutes after startup. * Skype fails during the first 2 minutes since the opening of the session. * Task manager hangs when trying put an end to the tasks of Internet Explorer tree I've done so far: * checked against viruses and malware (fully updated Kaspersky 2013 and SUPERAntispyware Professional, also have run ESET and Kaspersky Online Scanner) * full health check of SSD (life of 87% on the left, no problems occurred) , and also used the optimization tools * a full CHKDSK of the storage drive D: (no problems occurred) * S.M.A.R.T. checked with CrystalDiskInfo (everything is fine) * verified using CPU/RAM with CPU Meter is no problem * off hibernation file. * Disabled the pagefile (and also once again, but it makes no sense at all) I also noticed that 20 GB of free space went away from my disk D:\ storage. I really don't understand how it happened, as I did not install anything and the PC is not yet connected to the Internet at this time. All I've done is that I changed the registry key (HKEY_LOCAL_MACHINESystemCurrentControlSetServicesMsahci\\\) and turned the 'Start' value to 0. After you enable the AHCI mode, it started running like that. Any suggestions?
I had a reason to suggest that you create a pagefile on C. I didn't know you had an SSD, but I don't know why you think it's relevant? Your system and some programs require the existence of a swap file to work properly. Reformatting the hard drive and reinstall the operating system will not achieve this need! This recurring error was caused by the lack of a pagefile.
Log name: System
Source: volmgr
Date: 09/04/13 11:52:08
Event ID: 46
Level: error
Description:
Crash dump initialization failed!Disable the IPv6 protocol prevents its use. It does not correct the error.
You have a BIOS update that may or may not contribute to your problems.
-
Have used Windows Movie Maker very well for months and now it stops just to work
OK, so I had a recent problem with Movie Maker. How original is that? For months and months I used it with only minor headaches. But I can't understand it and I spent hours to friction on this problem and the search for something. All Google tell me is to make sure that my files are in a format that is accepted! Duh! I use them very well until about a month ago.
After months of works very well, many of my clips imported media (especially. AVI and others. WMV) has decided to stop working one day. The video will not play, but the sound is very good. I re-imported the videos just to be sure, but no luck... He would not even show a thumbnail after I imported the.
Original title: what is the problem with WMM? Help, please!
I tried to look at the files in Media Player and got a black screen with audio complete.I reformatted the. AVI files (using zamzar.com) in. Format WMV, but when I tried to import those, he would give me some nonsense. In any case, I tried to defrag my drive hard as someone suggested online (I have an old computer anyway) but I don't really think it helped.It could be a codec problem (I don't know what would have prompted such), the Enigma is that SOME of my clips will play in the preview, but they stop working as soon as I drag them on the timeline. And I found one. WMV file in one of my old projects that will play in the panel mounting.I even tried to save an unfinished project to my computer (16:9 aspect ratio, high quality NTSC). But I got an error message: "WMM cannot be saved to the specified location. Verify that the original source files used in your movie are still available, that the backup location is still available, and that there is enough available disk space, and then try again. "So I tried to save the recommended"best suited"on a blank CD and it always gave me this messageI hope this info helps (I don't know what most of it means):Name of the operating system Microsoft Windows XP ProfessionalVersion 5.1.2600 Service Pack 3 Build 2600Dimension E521 system modelSystem Type X 86-based PCProcessor x 86 family 15 model 79 walk AuthenticAMD 2 Mhz ~ 2004BIOS Version/Date Dell Inc. 1.0.3 02/10/2006SMBIOS Version 2.4System directory C:\WINDOWS\system32Boot Device \Device\HarddiskVolume2Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).Total physical memory 512,00 MBAvailable physical memory 145,58 MBTotal virtual memory 2.00 GBAvailable virtual memory 1.96 GB1.03 GB of swap fileYour specifications specify that you have 512 MB of physical memory...
It's your RAM. When video editing with an application like film
Maker it is generally recommended that a system has a nude
minimum of 1 GB of RAM and 2 to 4 GB would be better.That said, perhaps the following information will be useful:
The most common reasons for Movie Maker problems are...
(1) source incompatible or damaged (video clips, pictures, music files).
(2) incompatible, corrupt or nonexistent filters (Codecs).
(3) projects that are too big or too complex for the system resources.
First... Open Movie Maker and go to... Tools / Options /.
Compatibility tab and disable all filters / OK.Try to create your project and find out whether there is a
improvement.If no improvement, return to the same settings
and left click Restore values by default all the button / OK.As for file formats...
Several formats are apparently compatible with
Movie Maker, but the most reliable choices are:Photos - bmp
Video - wmv or dv - avi
(FWIW... DV - AVI is a specific format... it's
doesn't mean "everything". AVI files are compatible with
Movie Maker.)
Audio - wav, wma, wmvThere are to many converters available on the net and
Some are better than others... it can be interesting to try
experiment and see which suits you best.Proceed at your own risk *.
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)(1) format Factory (freeware)
http://www.videohelp.com/tools/Format_Factory
(the 'direct link' is faster)
(the file you want to download is: > FFSetup270.zip<>
(FWIW... installation..., you can uncheck
('all' boxes on the last screen)
(Windows XP / Vista / 7)First, you will need to decompress the file or just open the
Drag FFSetup270.exe out of the folder
and drop it on your desktop. To install left click.(2) Freemake Free Video Converter (freeware)
http://www.Freemake.com/free_video_converter/
(Windows XP / Vista / 7)(3) Koyotesoft Free Video Converter
http://www.koyotesoft.com/indexEn.html
(2000/XP/2003/Vista/Seven)(4) Sothink Free Video Converter
http://www.Sothinkmedia.com/video-converter/
(Windows XP / Vista / 7)(5) SUPER © Simplified Universal Player Encoder & Renderer
http://www.videohelp.com/tools/Super
(the download mirror site is faster) (Windows XP / Vista / 7)(6) Xilisoft Video Converter
http://www.Xilisoft.com/video-converter.html
(not freeware but receives good reviews)
(Windows XP (SP2 or later) / Vista / 7)There is a small chance that download and installation
one of the following Codec Packs would improve the problems.(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Proceed at your own risk *.
Media Player Codec Pack
http://www.mediaplayercodecpack.com/
(Windows XP - Vista - 7)K - Lite Codec Pack (full)
http://www.filehippo.com/download_klite_codec_pack/
(Windows XP - Vista - 7)Windows 7 Codec Pack
http://download.CNET.com/Windows-7-Codec-Pack/3000-13632_4-10965840.html
(Windows XP - Vista - 7)Download CCCP (combined Community Codec Pack)
http://www.CCCP-project.NET/
(Windows XP - Vista - 7)Good luck...
-
I have purchases product code for Vista Home Premium. I couldn't find the disk, so I installed Vista Basic. Microsoft does not authorize the premium code to record the "basic" program How can I get the two to work together on my machine? MS will not let me get the program of upgrading without registering to the basic version... and on, and it will.
original title: update windowsHello
Microsoft is correct; you need the correct product key for each specific edition of Vista.
These information from Microsoft about replacing lost software should help you:
http://support.Microsoft.com/kb/326246
Then you can install it properly.
See you soon.
PS If you use a Microsoft Vista DVD, which contains the files for the different editions of Vista must be installed. The product key determines which Edition is installed.
Builders recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as well as 32-bit and 64-bit editions different DVD lights.
Maybe you are looking for
-
It's the 1st small window that displays ' evalInSandbox:SyntaxError: syntax error ".I click 'OK', then the following window appears "syntax error". I click 'ok' and it disappears until I go to another web page.
-
I forgot my BIOS wordpass.What should I do?Thank you.
-
I upgraded to El Capitan and some apps are missing.
MacBook Air (13 inch, mid 2011) MacBook Air 4,2 Intel Core i5 at 1.7 GHz 4 GB memory I upgraded to El Capitan (10.11.3) and now the calendar and Contact applications are missing. I was not iCloud used for backup or restore. Before the upgrade, I was
-
Disable vibration while SMS using the touchscreen?
Someone knows how to do this? Each letter of the touchscreen that I shoot vibrates and is annoying all in SMS.
-
PCI device SM bus controller driver
in my "HP Pavilion g4-1303au Notebook PC" laptop computer device driver PCI and BUS SM cotroller driver not installed. so please give the link for this driver. the pci hardware id is: PCI\VEN_10EC & DEV_5209 & SUBSYS_3564103C & REV_01PCI\VEN_10EC & D