upgrading ram in my old dv4405nr pavilion

I just bought a new HP mini 110 1031NR. First thing I did was to delete the memory of 1 GB and replace it with a 2 gig. I would like to know if I can use the new memory of 1 GB, I just took out of the new HP in my old HP Pavilion dv4405nr which always has 512 MB (2 x 256)? Here's all the info I have: 1 GB of ram = hynix card 1 GB 2Rx16 PC2 - 6400 S-666-12 (info on the map). Former lodge is expandable to 2 GB and has 2 slots currently with 2 256 MB 1RX 16 PC2-4200 s-444-11-C0 (map info).

Without the memory runs at the same speed as the old memory if it works. You will be much better with a gig of RAM with a concert in half. The computer should be faster if you take the old memory and put in the 1 GB that you took the netbook. If the machine does not start with the new memory in you know it is not compatible.

Tags: Notebooks

Similar Questions

  • How upgrade to 64 bit Win 7 after upgrade Ram 6 GB on 3250br Pavilion DM1?

    I m going to upgrade 6 GB memory on my Pavilion DM1 3250br. Although windows indicate it is 64-bit capable windows anytime update installed 32-bit (because it has less than 2 GB available).

    1. How should you proceed to upgrade to 64-bit after upgrade memory? I don't have a system disk, only the suplyed key home premium by HP.

    2 HP has 64-bit for all devices drivers? They are in D: recovery drive or I´ll need to download the upgrade?

    3. any information you want to give.

    Best regards

    Eduardo

    Hi, Eduardo:

    You can try it.

    I know it works if you have a retail upgrade key which means that it is good for 32 or 64 bit.

    I don't know an ISO file that you get off the internet is an OEM file.

    If this is the case, it will not work. If this isn't the case, I doubt it will be.

    I have dealt only with the installations of Windows 7 using OEM disks or retail upgrade.

    Basically, the key that you use must be the same as the installation disc.

    OEM disc / ISO good with the key on the bottom of your portable forest 32 or 64 OEM.

    Plenty of retail disc / ISO only good with the full commercial product key, you get the box or the e-mail sent to you - 32 or 64 bit.

    The retail upgrade disc / ISO only good with the retail upgrade key, you get in the box or the e-mail sent to you - 32 or 64-bit.

    Upgrade Express disc / ISO only good with the upgrade retail or upgrade Express key - 32 or 64-bit if you have a disk.

    I used a disk of 64 bit Vista Business anytime upgrade to upgrade Vista Home Premium 64 bit update, and I was able to use the key from Vista Business 32 bit provided with the 32-bit disk (I had a 32-bit Vista Business retail box update but they come only with discs of 32 bits at the time and you had to order a CD of) 64-bit and pay $10. You can't even not the disks in 64-bit vista to MS.

    Hope this helps,

    Paul

    Paul

  • Upgrade memory for the old S320CDS Satelletie cell-is it possible?

    Can someone tell me if it is possible to upgrade RAM on my old Toshiba satellite - it's 7 with windows 98
    This topic - and account currently the 64 MB of RAM it came with when it's new.

    Thank you!!

    Hi Johanna

    As far as I know max your device memory is 160 MB. You can buy the second module with 64 MB of memory. Part number is PA2044U. Check this number with option of Google and you will find many suppliers where it can be stopped.

    You can also buy this RAM module:
    PA2043U 32MB
    PA2054U-MS 128 MB

    Good luck!

  • upgrade RAM on zt3215ea

    I want to upgrade ram on my old zt3215ea to 2G, can tell me how many ram slots on this machine, I only found one on the back, this laptop should have 2 ram slots specification I found you on the web.thank

    just found his housing another under keyboard, work, thank you

  • Upgrade RAM Pavilion p6-2030

    Hello Forums,

    I think to upgrade my Ram on my current computer Pavilion P6-2030.

    I think with the purchase of the fury of Kingston HyperX 4 GB 1333 MHz DDr3 CL9 Dimm. (HX313C9FB/4). This will be compatible with the RAM that is already installed and it will work.

    Thank you

    You are welcome.

    Yes, that is recommended by Crucial memory should work in your motherboard.  Buy a pair will give you much better performance that I said.  If it was me, I contact their Technical Support and ask them to recommend you the best memory of what you want to do.  These guys are the experts on their memory.  I contact Technical Support for most of the components that I buy.  The components change so quickly OEMs like HP can't stay with her.  As a result, many of the newer components sold won't work even in a two year old computer.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • Pavilion x 360-13-s102tu: how upgrade ram on HP Pavilion x 360-computer laptop 13-s102tu and what ram module supports this laptop?

    Hello, can someone help me to upgrade ram on HP Pavilion x 360-computer laptop 13-s102tu and also if anyone is familiar with how many slots there and what ram module supports this laptop?

    Hello

    Please use the part number and procedure on page 38 of the following guide:

    http://h10032.www1.HP.com/CTG/manual/c04825536.PDF

    (Note: same procedure for s1xx machines).

    Kind regards.

  • HP Pavilion 15 laptop: upgrade RAM

    Hello

    I want to upgrade RAM of my laptop. Should what kind of product I buy? Specifically, please.

    I would like to expand the capacity of the RAM as much as possible.

    It's the number of the product you need: F9G45EA #ABZ.

    Thank you very much.

    Best,

    Marco Boschi

    It is the 15-n233sl model and the plug you have 6 GB. See page 42 of the manual here:

    Repair manuals

    The manual indicates that it takes up to 12 GB which is a 4 GB and 8 GB module to the module but regularly, users have reported success with 2 x 8 GB for a total of 16 concerts. For most of the users 8 GB is a lot and it would mean just remove the module from 2 gig you have now and its replacement by a 4 GB. What that you choose to do I would have 2 modules size even for enable support dual channel. 8 concerts running dual channel is likely to be just as good as 12 concerts running in single channel due to incompatible modules. HP part numbers:

    Memory 4 GB 691740-001 module

    Module memory 8 GB PC3L 12800 1600 Mhz SHARED 693374-001

    Module memory 8 GB PC3 12800 1600 Mhz SHARED 670034-001

    http://www.Amazon.com/Kingston-Technology-PC3-12800-KTH-X3CL-8g/DP/B00D74FQ0U/ref=sr_1_3?ie=UTF8&QID=1451156733&SR=8-3&keywords=693374-001

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Pavilion 15-bc002nm: max ram taken in charge for Pavilion 15-bc002nm & ENVY 15-ae104nm

    What is the maximum RAM taken in charge for Pavilion 15-bc002nm & ENVY 15-ae104nm. And another thing, is the envy supports 5 GHz wifi?

    Thank you

    Hello

    First machine:

    Two SODIMM - not accessible/not extensible customer locations
    DDR4-2133 Dual Channel Support (bridge of DDR4-2400 to DDR4-2133) supports up to 16 GB memory max system
    4096 MB (4096 MB x 1)
    6144 MB (2048 MB x 1 + 4096 MB x 1)
    8192 MB (4096 MB x 2)
    8192MB (8192 MB x 1)
    12288MB (8192 MB + 4096 MB)

    and it supports 5 GHz

    http://support.HP.com/us-en/product/HP-Pavilion-15-notebook-PC-series/10862166/model/12498942/document/c05201461/

    Second machine:

    Two accessible/upgradable memory module slots
    Supported dual channel DDR3L-1600
    Support 16 GB of RAM in the following configurations:

    ● 16384 MB (8192 MB × 2)

    ● 12288 MB (8192 × 4096 MB × 1 + 1 MB)

    ● 8192 MB (8192 MB × 1, × 4096 MB 2)

    ● 6144 MB (4096 MB + 2048 MB)

    It does not support the 5 GHz

    http://support.HP.com/us-en/product/HP-envy-15-notebook-PC-series/8499282/model/9835590/document/c04919185/

    Which would you buy?  Whatever one, congratulations.

    Kind regards.

  • HP Pavilion G6: upgrade of the G6 from HP pavilion.

    Hi all. I was wondering what components I could upgrade in my 6 GB of ram, 1.7 Ghz APU Pavilion G6. I need to upgrade my proccessor running at 90% only at the start and gave zero factory it but no difference in performance. Can anyone help?

    G6-2241sa

    As suspects, it is a processor AMD E2. Here is the Service Manual:

    Manual

    It's the motherboard you have and it IS one where the processor and the motherboard are one piece.

    For use only with models of computers with processors AMD E2-1800 and Windows 8 Standard 697230-501

    The class E2 of processors is very low, as you have noticed. They are more like a netbook or Tablet processor rather than something that you want to use for the calculation of the grave. You could help the situation by increasing the memory of 8 GB (maximum) to remove the module from 2 gig you have and its replacement by a 4 GB. You could also install an SSD. You would spend about $150 between these two updates and I'm not sure it's worth. You will notice an improvement however but from memory and faster storage cannot completely lift the load from the central unit that must be part of the job and yours is just not up to the task.

    Your laptop computer case fit a half-bridge AMD or Intel motherboard but you would have to buy the motherboard and processor as well and that the cost will be well over $150 and are approaching the cost of a new phone.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Upgrading memory Sodimm DDR3 in my PAvilion dv7 - 7023cl

    Hello

    I want to upgrade the memory of my laptop Pavilion dv7 - 7023cl. Now I have two modules sodimm Micron; one of the 2 GB 1RX8 PC3L - 12800S - 11 - 11B 2. I would like to know if I can replace it with a 8 GB Super Talent Module that has the following characteristics:

    • Part number: W1600SB8GV
    • Type: DDR3 SODIMM
    • Capacity: 8 GB
    • Speed: PC12800 1600 MHz
    • Size & Bit: 512Mx8
    • Pines: 204pin
    • ECC: NO.
    • Registered: NO.
    • CL11, 1.5V

    Another option is a 8 GB module, which has the following features:

    Product description DDR3 8 GB 1600 Mhz SODIMM PC - 12800 RAM storage capacity 8 GB technology DDR3 SDRAM form factor SO-DIMM memory speed 1600 MHz (PC-12800) Type Dimm without BUFFER SO-DIMM support ECC NON ECC FWH Chip Configuration 16 512 X 8 C voltage 1.5V 204

    Thank you very much!

    Lol your laptop computer using PC3L... low voltage 1.35 volts and both those you have questions on clearly say 1.5 volt. Just in general there is no advantage to opt out of 'games' or 'performance' memory on consumer laptops. The systems are designed to work with conservative settings according to the distribution of the masses.

    Your laptop will accept 16 GB of RAM, but I would say go to crucial.com and look for a guaranteed memory compatible with your laptop. You're better off with 2 identical sticks of memory because you will then have the mode "dual channel" which is a bit faster.

    http://www.crucial.com/store/listparts.aspx?model=Pavilion%20dv7-7023cl&cat=RAM

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Problems upgrading RAM on XW9300

    Hello, I m trying to upgrade the RAM on my old XW9300. This workstation has 2 modules or 1 GB DDR1 400 Mhz / PC3200 - ECC.

    I ve tried it with two similar modules of 1 Gb NON - ECC, and the system does not recognize them.

    The technical guide of this SAI worksatation:

    Hello

    http://h10010.www1.HP.com/wwpc/ca/en/SM/WF06b/12132708-12132710-12132712-12132712-12132712-12132804-77987465.html?DNR=1

    DDR1-400 MHz ECC

    http://www.eBay.co.UK/ITM/1gb-module-PC2-3200R-400Mhz-DDR-RAM-184-DIMM-CL3-IBM-server-memory-/251262648340?PT=UK_Computing_ComputerComponents_MemoryRAM_JN&hash=item3a806bc014

    Supports the ECC error detection and correction

  • CC 7100 cmt: questions upgrade ram cmt dc 7100 (please help)

    Hey all,.
    There is history... or you can just go to the section "cut to the Chase" to the bottom of the post

    The long story...
    my name is chris, and I'm trying to help a 14-year-old son, friends learn a lil more on his old pc.

    his pc has a hand and is obviously outdated, I got a bunch of old carcasses of office and let him rumage anything that would contribute to his pc. We found a total of 3 GB of ram ddr400mhz which is just below its limit of 4 GB machines.

    so I thought everything would go smoothly, it is certainly not my first ram upgrade, having built many of the old desktop computers it was inflict through, I consider myself pretty well informed on the pc and have renovated a lot of pc, same Freelancer my skills of mechanics and tokens for a lil extra cash on the side I have dealt with many a problem, repair and upgrade, since I took my first windows machine in 2000, before that I started with a commodore 64 and eventually got an apple iic when I was about 10 years old... anyway, what im getting here, is I USED to know my s#@t, but for some reason any It's evading me and google isn't offering anything on the subject.

    We planned on him to update to sp3 after have modernized their equipment as much as we can, while at the same time educate him as much as I could about how the computer worked, how to open and how to treat the components inside, it was the first time, he had never looked inside his machine or any machine besides...

    However, because of delays and the issue with the ram does not, I eventually send him home with the same stock set up, he brought to me.

    Cut to the Chase

    The problem here is that for some reason when I install 1, 2 or 3 the cards of ram 1 GB the machine do not post and triggers a series of beeps system, so obviously something isn't jiving, and I can't put my finger on it.
    I can use 1,2,3 or all 4 of his stock [256 MB ddr 400 mhz] ram cards and it will display and start with change messages memory clear system, however, when you use less than four of its ram slots, a message is launched upward during post, stating something to the effect of all the slots must contain the same amount of ram

    We are working on PC is a:
    HP DC 7100 CMT
    Windows XP SP2

    current installed RAM is [256 MB ddr 400 mhz] x 4 = a total of 1 GB

    tried to upgrade RAM parts:
    Ballistix [1 GB ddr 400 mhz] x 2 = a 2 GB total

    more

    Memory Dell [1 gb ddr] (mhz are not)

    I thought it was probably a bios thing and was about to investigate, but we ran out of time, now I'm tender hand to this community in the hope that someone here can indicate what it is I'm obviosly dominant, I really want to get his machine is upgraded because it is expessing a lot of interest in Unity3D , and scripts, ANDS I'd like see hiw cultivate these skills and I can't buy a machine, and he cannot afford a new machine, so the upgrade of its rigging with these old quarters would be the most ideal situations for him, if we cannot find out we will simply create a new rig out of my 'old' , but the 3.0 ghz core dou in his dc 7100 cmt processor is probably better than any of the alternatives in my attic... so yes this is my dilemma and I hope that some here is kind enough to point me in the right direction

    Thank you and best regards,
    Chris

    Hello:

    You must have the total amount of memory in slots 1 and 3 are the same, and the same quantity in slots 2 and 4.

    The PC will not work if you put 1 GB in slot 1, 1 GB in slot 2 and 1 GB in the Groove 3 because you're short 1 GB in the empty slot 4 and just short of 1 GB in slot 4 = 5 beeps.

    Then... If you do not have 4 x 1 GB then use 1 GB in slots 1 and 3 and 256 MB in slots 2 and 4.

    See the table below on page 16 memory configuration.

    http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04287187

  • I use mac pro 4.1... RAM DD3 2009 Annual bus 1066.Toi want to upgrade RAM ram... I can't... bus in 1333 was dominated by toi.cam thank you to all

    I use mac pro 4.1... RAM DD3 2009 Annual bus 1066.Toi want to upgrade RAM ram... I can't... bus in 1333 was dominated by toi.cam thank you to all.

    I don't understand what you mean by "I can't... bus in 1333 was dominated by the toi.cam.

  • Upgrading RAM on Satellite P30 141

    Hello

    Is it possible to upgrade memory on a pro Satellite p30?

    I am currently having 512 MB of RAM and would like more (maybe another 512 or 2 x 1 GB)

    can be upgraded RAM on this satellite?
    Anyone know how to find out?

    Thank you
    brand

    Post edited by: fairness4fansCoUk

    Satellite Pro 141 is not known to me and I guess that the number is not entirely correct what laptop do you have exactly?

  • HP ENVY 23-d107er: upgrading Ram and processor

    I want to upgrade RAM, up to 16 Gb. Help me, please - I don't understand how to set the compatibility of frequency and CASE latency of RAM and motherboard (sorry for my English). My motherboard frecuancy is a...

    Memory how much my motherboard support?

    Can I install DDR4 memory or not?

    Or "the best"type of memory is DDR3L?

    SO-DDR3 16 GB (2x8Gb) PC15000 - 1866 MHz Kingston HX318LS11IBK2/16?  -1866 MHz frequency

    If my choice is wrong, maybe I could install this (also DDR3L) RAM:

    16Gb (2x8Gb) SO-DDR3 PC12800 1600 MHz Kingston CL9 HyperX HX316LS9IBK2/16 Impact black? -1600 MHz frequency

    or

    Kingston HyperX Impzact [HX316LS9IB/8] SODIMM?

    And could you give me a tip of advise on upgrading the processor?

    The only choice is i7 - 3770 s?

    Hi there @_Alexei_,.

    Welcome to the Forums of HP Support!  I understand that you are looking for more information on CPU and RAM upgrade options for your computer.  I'm happy to help you with this.

    Looking at HP and Compaq Desktop PCs - specifications of the motherboard, IPISB-NK (Lavaca3-SB) for your computer, it lists the upgrade RAM and CPU information.

    Here is the information of supported RAM:

    Dual channel memory architecture two DDR3 SO-DIMM (204) media pins
    PC3-10600 (DDR3-1333)
    PC3-12800 (DDR3-1600)
    Memory non - ECC, unbuffered

    Supports 1 GB, 2 GB, 4 GB and 8 GB DDR3 SO-DIMM (8 GB only available on systems using processors Ivy Bridge)

    Supports up to 16 GB on 64-bit computers (only available on systems using processors Ivy Bridge 16 GB)
    Supports up to 4 GB on 32 - bit * PC * PC 32-bit cannot resolve a full 4.0 GB memory.

    Also, here is the CPU of the same document information:

    TDP: Varies according to the processor
    Socket type: LGA 1155
    The motherboard supports the following processor upgrades:
    Intel Core i3-3xxxT (Ivy Bridge) Dual Core up to 35W
    Intel Core i3-3xxx (Ivy Bridge) Dual Core up to 55W
    Intel Core i5-3xxxT (Ivy Bridge) Dual Core up to 35W
    Intel Core i5-3xxxT (Ivy Bridge) Quad Core up to 45W
    Intel Core i5-3xxxS (Ivy Bridge) Quad Core up to 65W
    Intel Core i3-2xxx (Sandy Bridge) Dual Core up to 65W
    Intel Core i3-2xxxT (Sandy Bridge) Dual Core up to 35W
    Intel Core i7-2xxxS (Sandy Bridge) Quad Core up to 95W
    Intel Core i7-3xxxS (Ivy Bridge) Quad Core up to 65W
    G6xx Intel Pentium Dual Core (Sandy Bridge) up to 65W
    G6xxT Intel Pentium Dual Core (Sandy Bridge) up to 35W
    G8xx Intel Pentium Dual Core (Sandy Bridge) up to 65W
    G20xx Intel Pentium Dual Core (Ivy Bridge) up to 55W

    Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

Maybe you are looking for

  • The best Skype video call recorder?

    Hello I'm looking for the best Skype video call recorder. Which is the best and easy to use? Thank you Kevin

  • PowerShell command to make changes in BIOS

    Two things, I need it please. the list of the models manageable through WMI (if not all)assistance in obtaining the following to work when there's a BIOS password set Your help is appreciated. I try to use WMI to change in the BIOS on various laptop

  • Xcode 7 Beta slow download

    Try to download Xcode beta 7, but it is downloading at a rate of 150 k/s checked my internet speed and I'm at 10 Mbps. No idea as to what could be the problem? Thanks to all who responded.

  • HP Laserjet M1319F MFP is not able to scan under Windows 7 (64-bit at home)

    I have a Windows 7 Home Premium 64 - bit HP Pavilion connected to the HP Laserjet M1319F MFP. All the functions of the printer worked so far. The scan function has stopped working. Here are the steps and errors that I see: 1. I load the sheet from wh

  • Tunnel VPN site to Site with 2 routers Cisco 1921

    Hi all So OK, I'm stumped. I create much s2s vpn tunnels before, but this one I just can't go there. It's just a tunnel VPN Site to Site simple using pre-shared keys. I would appreciate it if someone could take a look at our configs for both routers