URGENT: Error-61046

Similar Questions

• FPGA/FlexRIO error-61046

  Hi all

  Please, for the love of God can someone take a look at the attached FPGA project, I hit to the top and tell my why it is that whenever I run, as soon as he's trying to read/write on the host computer, it returns error-61046? A screenshot of the error is included in the attached .zip file.

  I made many programs FPGA before with no problems, while using the same FPGA and FlexRIO module and never had this problem. If I run an example program it works fine so I am confident, that the error lies in my programming, I can just see where!

  As you can see all the clocks are internal and appear to be configured correctly according to the example programs and other programs FPGA, that I have done before, so I'm puzzled. I hope that it is just my stupidity and lack of coffee.

  Congratulations in advance.

  Mitch

  The pilot FlexRIO comes two CLIPs for the 5781. At ' a "NI 5781 Sychronous system" OR 5781 "VIDEO CLIP.

  The "NEITHER 5781' is what originally delivered with the FAM and is always delivered with the driver for legacy purposes. I would discourage the use of this CLIP because it uses regional clocks for IO Module clock 0/1 which limit the amount of fabric that can be driven by these clocks to the fabric available in the respective region of the FPGA. The advantage of this CLIP, it's that the ADC and DAC can be clocked at different rates through a clock divider that exposes the CLIP.

  The 'NI 5781 Sychronous system"CLIP is what is recommended for all new models. It uses a world clock which can target tissue in all regions of the FPGA. This CLIP uses the same clock to drive the ADC and DAC (IO Module clock 0). IO Module clock 1 is not used in this CLIP.

  If you used the sychronous CLIP system and always a logic had driven out by IO Module clock 1 it that would explain why you received the error of non-response from IO Module clock 1 is left connected in the sychornous CLIP system.

• Urgent: Error during the generation of the big report

  I'm getting below error when I run the report for long term. The report below will only run for one or two days. Please let me know how to fix this error. It's very urgent.

  

  while I'm the same report run for 2 days (30 records) it's execution and generate output. But when running for 8 days (200 folders) to show that the error

  based on that, you have to re - check the xml data and the logic model (exclude certain logics complex and step by step, recheck and add logic)

  looks like some data to lead to error can be by division or a molding to the number string or can be some special symbols

• Help. URGENT error 'no photo not found to import.

  I work on a program of commemoration and urgently need to import the scans and other images with different dates of creation, an external drive in LR2. Each time, by all means import, I get an error 'no photo not found in import' but three of 82 photos I need. The three that matter successfully are digital photos were taken the same day, a date which seems to be randomly dates different probably 15 or 20.

  I tried several options "File management" and "copy to: / users/name/Pictures" and "arrange by date: [date] ' and various other combinations.

  How can I solve this problem? I'm not new to Lightroom, but I've never had this problem before. A number of other users having the same problem, I saw in the forums. In each case, the problem is not resolved or if it was, I was unable to track a solution for the glitch that I am experiencing.

  It seems to me that Import should not be so difficult for any help is welcome!

  Winsen

  Huge means more than 65,000 pixels on a side, which I doubt you have.

  You have all the strange characters in filenames - i.e. non-alphanumeric ones?

• IN014 urgent error

  Hello

  Can you help me figure out why I encounter the below error message when I try to download my .article, please? Date deadline is tomorrow morning at the customer.

  File is built in InDesign, has inserted video.

  I already tried without the video, and in this case the download works.

  I also tried to check the manifest.xml but when I zip and unzip that it will create a .cpgz file and it is impossible to access the manifest.xml)

  Thank you

  Sophie

  I'll make sure the video:

  • is a H.264 encoded mp4 file
  • Click on the link, or make sure that the location of streaming is valid (not https)

  I now use BetterZIP on Mac, it allows me to look inside a zip and extract or replace parts of a zip file. This could help in the issue of your crimper.

• Content of the server to check in content - URGENT error

  Unable to filter ' collections. CollectionValidateCheckinData' of type 'postValidateCheckinData '. Failed to instantiate the java class code ' collections. CollectionValidateCheckinData' the location 'collections. CollectionValidateCheckinData' location defaults to the ' collections. CollectionValidateCheckinData'. java.lang.ClassNotFoundException: collections. CollectionValidateCheckinData [details]

  An error has occurred. The stack trace below shows more information.

  ! $awappp54:! csUserEventMessage,AZLIFEM\\azl6u3d,inetucm.azlifem.azl.pvt!$!apFilterInstantiationError,collections. CollectionValidateCheckinData, postValidateCheckinData! apUnableToInstantiateClass, collections. CollectionValidateCheckinData, collections. CollectionValidateCheckinData, collections. CollectionValidateCheckinData! syExceptionType2, java.lang.ClassNotFoundException, collections. CollectionValidateCheckinData

  intradoc.common.ServiceException:! apFilterInstantiationError, collections. CollectionValidateCheckinData, postValidateCheckinData! apUnableToInstantiateClass, collections. CollectionValidateCheckinData, collections. CollectionValidateCheckinData, collections. CollectionValidateCheckinData

  at intradoc.shared.ComponentClassFactory.createClassInstance(ComponentClassFactory.java:161)

  at intradoc.shared.PluginFilters.filter(PluginFilters.java:70)

  at intradoc.server.DocServiceHandler.validateCheckinData(DocServiceHandler.java:1399)

  at sun.reflect.GeneratedMethodAccessor44.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:585)

  at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)

  at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)

  at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)

  at intradoc.server.Service.doCodeEx(Service.java:490)

  at intradoc.server.Service.doCode(Service.java:472)

  at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)

  at intradoc.server.Service.doAction(Service.java:452)

  at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)

  at intradoc.server.Service.doActions(Service.java:447)

  at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)

  at intradoc.server.Service.executeSubServiceCode(Service.java:3497)

  at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)

  at intradoc.server.Service.executeServiceEx(Service.java:3492)

  at intradoc.server.Service.executeService(Service.java:3476)

  at intradoc.server.Service.doSubService(Service.java:3465)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:585)

  at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)

  at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:279)

  at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:264)

  at intradoc.server.Service.doCodeEx(Service.java:507)

  at intradoc.server.Service.doCode(Service.java:472)

  at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)

  at intradoc.server.Service.doAction(Service.java:452)

  at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)

  at intradoc.server.Service.doActions(Service.java:447)

  at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1121)

  at intradoc.server.Service.executeActions(Service.java:433)

  at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635)

  at intradoc.server.Service.doRequest(Service.java:1707)

  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)

  at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)

  Caused by: java.lang.ClassNotFoundException: collections. CollectionValidateCheckinData

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:200)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass(URLClassLoader.java:188)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:268)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:251)

  at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)

  at java.lang.Class.forName0 (Native Method)

  at java.lang.Class.forName(Class.java:164)

  at intradoc.shared.ComponentClassFactory.createClassInstance(ComponentClassFactory.java:148)

  ... 39 more

  Hi all

  I restarted the IDC content management service and it worked. Thanks for looking at my question.

  Thank you

  Aerts

• Urgent: Error Communication with the agent of the EAC

  Hi all
  
  I am facing the slot problem when I ran the update from the base. Can someone help me what is causing this problem? and what to do to fix this?
  
  [10.16.12 12:18:08] NEWS: Audit AppConfig.xml definition against the provisioning of existing CEC.
  [10.16.12 12:18:10] INFO: Definition has not changed.
  [10.16.12 12:18:10] INFO: Starting database update Script.
  [10.16.12 12:18:11] INFO: Lock acquired "update_lock."
  [10.16.12 12:18:11] INFO: Download from Web Studio config files.
  [10.16.12 12:18:11] INFO: The utility [ITLHost] start shell "cleanDir_config".
  [10.16.12 12:18:11] SEVERE: Error communicating with the agent of the EAC while starting the utility 'cleanDir_config '.
  Occurred during execution of the valid BeanShell script 10 line:
  [[
  
  7. If (Forge.isDataReady ()) {}
  8. If (ConfigManager.isWebStudioEnabled ()) {}
  9. Get Web Studio config, merge with Studio of Dev config
  10. ConfigManager.downloadWsConfig ();
  11. ConfigManager.fetchMergedConfig ();
  12. } else {}
  13. ConfigManager.fetchDsConfig ();
  
  ]]
  
  [10.16.12 12:18:11] BASS: Caught an exception during method call "run" on the object 'BaselineUpdate '. Release locks.
  
  Caused by java.lang.reflect.InvocationTargetException
  sun.reflect.NativeMethodAccessorImpl invoke0 - null
  Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
  com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - valid BeanShell script runtime error.
  Caused by com.endeca.soleng.eac.toolkit.exception.EacCommunicationException
  com.endeca.soleng.eac.toolkit.utility.Utility start - communication error with the agent of the EAC starting the utility 'cleanDir_config '.
  Caused by com.endeca.eac.client.EACFault
  sun.reflect.NativeConstructorAccessorImpl newInstance0 - null
  
  [10.16.12 12:18:11] INFO: Lock released "update_lock".

  No idea how to fix this properly. If the server does not get used for something else that your own development, then you can simply delete the configuration of short: stop the EAC (short HTTP Service), rename the directory %ENDECA_CONF%\state to the backup State, create an empty directory, then restart the service. You need to run initialize_services to re - initialize your request. If it's a server 'appropriate', i.e. has other applications running on that you may not want to not re - initialize, support ring - they will have hopefully a better suggestion.

  Michael

• Application Loader - urgent error

  Is, al kamel mi app me appears este error, what indica?

  

  tienes una en "Minería" tilde y las tildes no son aceptados characters.

  Solo is aceptan characters a - z (altas y bajas), Miraglia (0. 9), puntos y medio guion.

  prueba el changing number ;-)

• Urgent: Error executing ODI interface

  Hello
  
  I get this error when executing a single ODI interface. Here I am trying to load data from a file to SQL server table. Help, please
  
  ODI-1228: task failed NABIN_INTERFACE_PROCEDURE_SOURCE (integration) on the branch MICROSOFT_SQL_SERVER ODISTAGE target.
  Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: incorrect syntax near ')'.
  at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(SQLServerException.java:216)
  at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(SQLServerStatement.java:1515)
  at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doExecutePreparedStatement(SQLServerPreparedStatement.java:404)
  to com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement$ PrepStmtExecCmd.doExecute (SQLServerPreparedStatement.java:350)
  at com.microsoft.sqlserver.jdbc.TDSCommand.execute(IOBuffer.java:5696)
  at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(SQLServerConnection.java:1715)
  at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeCommand(SQLServerStatement.java:180)
  at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeStatement(SQLServerStatement.java:155)
  at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.execute(SQLServerPreparedStatement.java:332)
  at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
  at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
  at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:338)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:263)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:822)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
  at java.lang.Thread.run(Thread.java:662)
  
  
  The code in the tab of the task of the session:
  
  Update ODI.db_owner. I _TRNG_SOURCE $
  Set IND_UPDATE = 'U '.
  When there is)
  Select 'X '.
  of ODI.db_owner. TRNG_SOURCE t
  where
  )
  
  Thank you
  Nabin

  Nabin Saha says:
  Hello

  I get this error when executing a single ODI interface. Here I am trying to load data from a file to SQL server table. Help, please

  ODI-1228: task failed NABIN_INTERFACE_PROCEDURE_SOURCE (integration) on the branch MICROSOFT_SQL_SERVER ODISTAGE target.
  Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: incorrect syntax near ')'.

  The code in the tab of the task of the session:

  Update ODI.db_owner. I _TRNG_SOURCE $
  Set IND_UPDATE = 'U '.
  When there is)
  Select 'X '.
  of ODI.db_owner. TRNG_SOURCE t
  where
  )

  You use incremental IKM wherever you have not defined any function key ODI to perform the UPDATE operation.
  So it fails to stage flag updates lines.

  Mark the key based on which you do update operation.
  If no update is needed then go command Append IKM

  Thank you
  Fati

• Access to the Bi Publisher - Urgent error

  Hi all
  
  
  I eto unabl access the BI Publisher through presentation services and directly
  This is the error I get
  'Oracle BI Publisher Enterprise
  Error in the processing of your application of BI Publisher. Please contact your administrator to review the log files.
  Error details
  "Error codes: S8VLP8HS.
  
  OBIEE is installed on Windows [Basic Installation].
  
  Please help me on how to solve this problem.
  
  Please consider this as an emergency.
  
  Thanks in advance,
  Veena

  Hi Vidal.

  See this http://oraclebi.soundvoid.net/2008/12/bi-publisher-login-errors/
  After checking the above also follow the belo...
  OBI EE - BI Publisher

  Thank you & best regards
  Kishore Guggilla

• Urgent problem with X 230 Windows 8.1

  I upgraded my ThinkPad X 230 to Windows 8.1.

  I get the following two message whenever I start

  1. power Manager Group: an error occurred during the loading of a resource DLL.

  2. problem starting C:\Program Files (X 86) \Thinkpad Utilities\PVMTR64V. DLL. A Dynamic Link Library (DLL) utiliization routine failed.

  I uninstalled Power Manager 3.06 but I always get errors.

  Please tell me how a get rid of the errors or (b) direct me towards a more recent link to Desktop Power Manager to install.

  It's quite urgent (error every single boot).

  Thank you.

  Uninstall the power manager

  Navigate to C:\Program Files (x 86) \ThinkPad\Utilities and rename PWMTR32V. DLL and PWMTR64V. DLLS as files _old.

  Download Glary Utilities or counterpart and remove the PVMTR64V as a startup item.

  Problem disappeared.

  However, Windows 8.1 remove Windows 8 Power Manager and there seems to be no way to recover it.

• Understand how to set up and use a sample FlexRIO clock

  Hello

  Following this discussion on inputs glitching, I learned that I need to use the area of the sampling clock to read nodes to HAVE it in my 5734 OR. So I right click 'FPGA Target'-> "New FPGA Base Clock" and selected "IO Module clock 0". In general, I followed the instructions at http://www.ni.com/pdf/manuals/375653a.pdf

  Issues related to the:

  1. I noticed that, regardless of the value I put in "Compile single frequency", timed loops using this clock works at 120 MHz. Should it?
  
  
  2. I want to gain at 10 MHz, no 120 MHz. is there a way to create a clock derived from the sample clock? (Right click on the clock gives me not the option "New FPGA derived Clock")
  
  
  3. In the example of the FIDL, engine of CQI on 5734 SMU - 7962R.lvproj, 'IO Module 0 clock' is configured to be compiled to "100 MHz" instead of 120 MHz. is there a meaning behind this value? (# 1, I understand that the value is ignored)
  
  
  4. The code example below, I get "error-61046 occurred to read/write control" unless I have excluded the "Reset" of the VI host node. This problem does not occur if I use on-board 40 MHz clock instead of the clock of Module e/s 0, (although I'd get glitched data). Am I wrong configured something?
  
  
  1. In my current, more complex program, I get the same error even with disabled node, if I stop and restart the host VI - but the next attempt would succeed.
  
  
  2. I have attached the sample file project, the screw and bitfile, where they are useful.

  

  

  Hi FKSH,

  You are right that you must Access your e/s on the 5734 NOR in the area of sample clock:

  

  (this information is by using LabVIEW for the CLIP of 5734 OR)

  It is a clock Module e/s 0 or sample clock based on your version of the FlexRIO driver you have installed. Based on your statements, looks that you use LabVIEW 2014, so be sure to have FlexRIO 14.0 or FlexRIO installed 14.1. If you have FlexRIO 14.0 or earlier, the sample clock will be IO Module clock 0. If you have FlexRIO 14.1 or later, it will be the sample clock:

  

  (also of the documentation NOR 5734 CLIP in help)

  The only support for sampling rate is 120 MHz, unless you use an external clock CLK in and it must be between 50 and 120 MHz (see page 9 of the Manual). If you wish to purchase to 10 MHz, the best thing to do would be to sample the e/s to 120 MHz and then decimate the data by a factor of 12 (keep all 12 data points only and throw out the rest).

  Regarding the FIDL, I'm guessing that you're referring to the configuration in the properties of the clock:

  

  This configuration is not actually change the frequency of the clock. The compiler uses this value so that the logic can operate at the specified frequency, but the real clock is provided elsewhere (in this case, the FAM).

  Finally, I saw error-61046 occurs more often because of the configuration of the internal clock. Make sure you use the clock on the right as the only cycle timed loop source as I mentioned above. In general, I do not recommend write directly on a 120 MHz indicator, as there are a lot of other logic that needs to be done in order to update the indicator. The data are sent to a domain different clock under the hood, so you can actually update the data and I suspect that there are some conflicts with the clocks. You also lose data as the host won't be able to read all the data before it gets crushed. Instead, I would use DMA FIFOs if you need all the data you acquire or to send the data to a different loop which will be responsible for the update of the indicator in a slower clock domain.

  In general, I recommend always that the start-up of the examples in the Finder as a good place to check if the equipment works properly and as a reference for the correct configuration. Once you compile the code, you should be able to run it natively to acquire some data. "" "These examples will be under input and output hardware" FlexRIO "Modules e/s ' NI 573 X ' NI 5734.

  Best regards

• 10.1.2 reader does not print

  XP SP3 operating system.  Installed the drive 10.1.2 and now cannot print pdf is open in IE8, or pdf file is opened directly in the player.  Printer (HP Laserjet 1020) 'prints' a blank worksheet, and then displays the error signal and must be changed and the new before it will print anything else, from another source.  Prints the WORD 2003 documents perfectly - as always.  When the previous version of player was running, there is no problem. It seems as if an urgent error fix is needed - I'm right?

  Brian.

  Please see if none of the workarounds below, work for you:

  http://kb2.Adobe.com/CPS/928/cpsid_92870.html

• Error recovery MStudioDAQmx.2010.msm dependence * URGENT

  I have a solution, Visual Studio 2012, targeting .NET 4.0 with a project of installation program InstallShield 2015. There are two projects in the solution containing references to:

  NationalInstruments.DAQmx 15.5.40.109 and

  NationalInstruments.Common 15.1.40.49152

  This is the DLL that is contained in the 'in progress' folder for the download of 15.5 DAQMX.

  In an attempt to build the Setup program I get two errors in Installshield

  -4072: error recovery addiction Module_Id_Common_2010_32:1033 to c:\program files (x 86) \common files\merge modules\MStudioDAQmx.2010.msm

  -4072: error recovery addiction Module_Id_Common_2010_32:1033 to c:\program files (x 86) \common files\merge modules\MStudioDAQmx.2010.msm

  I assume that it is a mistake by project.

  I have urgent need to deploy an updated installation and I'm completely stuck at this point. I tried to add these prerequisites through explicitly in the MSM file (since it has two or three prerequisite showing all with the same generic name and no way to tell them apart) and it did not help. I searched my entire PC for this MSM file and it only appears in the directory named in the error message is not any kind of difference between the different versions in different folders.

  In fact, I DIDN'T have to group the installer of data acquisition (manually install us the runtime anyway) but I can't seem to find a way to stop the system to detect and want to consolidate.

  The problem is two-record:

  1. the problem does NOT occur on the DAQmx 15.1 it happens to 15.5; If the project is built with DAQmx installed 15.1, dependence analysis works perfectly and the project builds

  2. due to the #1, InstallShield points to the modules of NEITHER say "DAQmx is not an InstallShield module, and since he has just updated their module you should contact the vendor of the module.

  I bypassed myself the problem by adding specifically excludes for DAQ in the Installshield include/exclude XML files so that the dependency scanner would go against the DLL DAQmx 15.5 and then manually including the DLL required two in my project.

• Getting 7 error with the HTTP POST vi method when deplyed ISO crio as executable... urgent!

  Hi all

  I have an application where I can access the net server point of LabVIEW via the HTTP protocol to send the data. My application works fine when I run it on XP, and also sometimes on cRIO. I'm writing and reading files to store and read data from the server.

  When I do my application executable and deployed on cRIO I am constantly 7 error that says "Error in the node library function to call at the POST vi LabVIEWHTTPCLIENT".

  After getting this error if I try to run the my new project the crio (not through exe) I keep getting the same error. This means once the executable file is deployed on the crio, I get the error in my project application which was working fine before you deploy the executable file.

  7 occurs very frequently. and I am unable to find the reason. I gave all the paths in the constant form located on crio and files accessible also when the application is run.

  Is someone can you please help me what this error 7?

  as a result, that it is bound to the HTTP POST vi method...

  How can it be fix?

  Its quite urgent...

  Thanks in advance.

  Solution is provided by the NOR... Vi POST method missing two files that need to be there in the startup of the CRIO.insted folder there is in the system folder. That's why when running the exe that the startup on crio application it gives error as the files are not there. The fix for this HTTP POST vi update isn't out yet EITHER.