USB 2 Drive not opening on Win 10 Vault Surface Pro 3

Similar Questions

• All my work on usb processor does not open.

  USB

  All my work on usb processor does not open and the window instructions says it could have been changed or moved, but have not changed or moved files and folders become EmailXtender.  Please help find the files as important documents and letters are on usb.

  You must NEVER use Word to change the USB files as it is almost guaranteed to cause the corruption or loss of files.  Working on the files on a hard drive and then transfer it to USB.

• USB Flash drive not working no-V112b

  Unable to content on a USB flash drive, not getting not formatted. It is within the warranty period. How the guarantee?

  Only if the drive was still usable and allowing for the write you to read the summary file but not. A read-only error.

  You declare that you cannot access the drive at all, is - this correct? If so, I would get the replaced disk.

  If you can read the content, not only to write and run this tool to fix this error.

  Reach
  http://www.PNY.com.tw/index.php?CLS=2&mode=download
  Download USB Driver Flash Format Tool (Ufix-II).
  You will need to have installed to extract the .rar of 7 - Zip. It is downloadable for free. http://www.7-zip.org/download.html
  You will extract the downloaded file "RecoverTool_V2.00.42_M1223 8CE.exe" and run.

  IF this is not what is wrong, then the drive is bad. Trying to force the reader to format isn't going to work. Replace it.

  It will be useful.

• Just downloaded LR 2015 compared to the creative clouds and when I click to run it blinks in and out and will not open. I have a macbook pro 13 "retina

  Just downloaded LR 2015 compared to the creative clouds and when I click to run it blinks in and out and will not open. I have a macbook pro 13 "retina

  Hi Frank,.

  You can follow the article: connect, disconnect you and | Creative desktop application Cloud disconnect and reconnect back to creative cloud and try to launch your Lightroom 2015 application.

  Let us know if it works or not.

  Thank you

  Yann Arora

• USB flash drives not detected on the Windows XP-based computer

  Original title: flash drives

  I have win - xp on a dell 2400 platform its flash USB 2.4 G & 533 Mhz. readers and cameras are no longer rec. of my USB ports on comp. I formatted & restarted win - xp on the computer to fix this problem without success. Can anyone help?

  Hello

  1. what exactly happens when you connect USB devices to the computer?

  2. you receive an error message when you connect the USB to the computer?

  Check the status of the USB device in Device Manager:

  a. click on start

  b. click on run

  (c) in the Open box type devmgmt.msc

  d. in Device Manager, expand universal serial bus controllers

  e. double-click the device and check if an error message or error code is listed

  Method 1:

  You can run the fix provided in the link below it to solve the problem.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Method 2:

  Remove and reinstall all USB controllers

  a. to remove and reinstall all USB controllers, follow these steps:

  b. Click Start, run, type sysdm.cpl in the Open box and then click OK.

  c. click on the Hardware tab.

  d. click the Device Manager button.

  e. expand Bus USB controllers.

  f. right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  g. restart the computer and reinstall the USB controllers.

  h. connect the removable USB storage device and perform a test to ensure that the problem is solved.

• Why is my 64 GB USB Flash Drive "not a backup location valid?

  I tried to turn it to a previous question, but reading of the Code of conduct for this forum, I discovered that it was inappropriate to do that.  My apologies for this.

  I am running Windows 7 Home Premium 64 - bit SP1, installed using Toshiba recovery disks (I have a new Toshiba laptop, when I got the system I opted to not have a recovery partition).  I just cleaned all the bloatware off Windows, ran Windows Update until there was no more updates for (achieved in this way SP1), and now I have a fresh and clean windows installation, which has never even been to a single Web site.  Now, I am trying to create a system image on a 64 GB flash drive (I won't even finish by using half of it, as my SSD has only about 19 GB used, and which includes the hibernation file (I disabled the pagefile, because paging files are unkind to SSDs))

  Before, I asked if it was possible to manually create a System Image of Windows 7 on a USB Flash drive (big), and I got two answers 'Yes' to two stars of the community. (See my question here)  It is also stated that it is possible on windows.microsoft.com, here.  Note that when windows.microsoft.com stipulates "the system image must be saved on a hard drive, reference is made to automatic creating system images.  If you keep reading, you'll see that the page says that if you want to manually create a a system image, this image of the system may be recorded on optical discs, a USB Flash drive or a hard drive.  If it is possible, then why will I have the following problem?

  64 GB USB Flash Drive inserted--> closed Autoplay dialogue--> Opened "My Computer"--> Right-clicked drive E (my flash drive) and the selected format--> Unchecked 'Quick Format'--> size of the NTFS system chosen and 4096 bytes of cluster--> Clicked 'Format' and acknowledged that all the data will be deleted--> waited a while for the form to fill out, then clicked OK--> closed 'My Computer'--> ejected my flash player by clicking on 'remove hardware safely'--> physically unplugged flash drive--> Grabbed a diet coke with ice--> inserted 64 GB USB Flash drive--> AutoPlay dialog closed--> opens the start--> Clicked "All programs" Menu--> clicked maintenance--> click Backup and Restore Center--> clicked on create System Image--> (scans of program for storage devices)--> my flash drive appears under "on a hard drive" and the words 'the drive is not a valid backup location' appear under my FlashDrive being listed.  For reference, "on one or more DVDs" appears just below the text saying "the drive is not a valid backup location."

  My understanding is that what I just tried to do is create an image of the system on an NTFS partition formatted (with a 4 KB cluster size) 64 GB USB Flash Drive.  But it is not letting me!  I understand that I can't plan the creation of automatic system for USB Flash drives, but according to windows.microsoft.com image and two stars of the community, it is indeed possible to "manually" create a system image on a large USB Flash drive, which I think is what I just tried to do.  If there is another way to create a system image, even more 'manually' than what I do (I'm certainly not afraid of the command line, if I need to use it I'm more than happy to do so), please let me know.

  I have a low-quaility SATA 3.0 Gbit/s notebook HDD in an enclosure USB powered bus at low prices, and I was able to create a system on that image.  However, I expect this device to fail shortly.  I also managed to create a system image on a DVD-r virgins.  I did, however, just spend $85 on a 64 GB USB Flash Drive specifically to store an image of the system, which I expect to use to back up Windows 7 with World of Warcraft installed (total size of drive C will be approximately 50 GB; I have not yet downloaded WoW; "I want to overcome this first).

  Any ideas would be appreciated.  Thank you!

  1st edit: adding links so people would not need to copy and paste to their address bar and said the last sentence of the last paragraph.

  I suggest avoid you the Windows backup program and you get a good commercial backup program. This forum is frought with for a windows problem reports. I know that I was very impressed when I tried it. Two me are familiar with and like Norton Ghost (which I use for 7 years without the 1st problem) and Memeo, which has 30 day free trial and you can buy it for $29.99 - you can download it from http://memeo.com. You can get Ghost for almost nothing (like me), if you look at the sales.

  CNET has a lot of reviews of backup program to

  http://download.CNET.com/Windows/backup-software/?tag=contentBody;sideBar.

  Some of them are free (the last time I checked there are 315), some have free trials (more), and some are buying only (more than 200).

  Good luck.

• External hard drive not opening

  My external hard drive (Toshiba 1 TB eBasic) does not open. When I connect to pc USB connection is detected. But it does not open. His memory is shown as empty. Initially, it is 1 TB. I tried CHKDSK comment initially, he replied that the file system is RAW. Help, please...

  Hey Rai,

  Thanks for the reply.

  As you mentioned you tried to connect the hard drive on different computer and different computers USB ports, then I suggest you contact Toshiba to get help. You can contact them on the link below.

  TOSHIBA FORUMS

  http://forums.Toshiba.com/

  Let us know the status of the issue.

• PDF files do not open in win 8

  XI player does not open the pdf from the Explorer files if one (or more) are already open - this happens only to win 8 - it I possible to open multiple files by using the feature open drive itself - very annoying - please help!

  Try to disable the Safe_mode in Adobe Reader [Edit |] Preferences | (Improved) security].

• Floppy USB drive not recognized when installing WinXP on Satellite Pro L40

  History:

  I bought a Satellite Pro L40, it came with windows vista. I can't stand vista windows for obvious reasons. so I formatted the HARD drive. I have a copy of windows XP.

  IV ' e read on the internet that I need Intel storage driver manager...

  IA´ve got the driver, he got on a floppy, and it does not, because when I start to install XP, it works (after pressing F6 & choose the driver to install). I come to the part of license agreement, press F8 accept...

  I select the partition I want to use (in format completely on vista). It starts to load more stuff... so he said "PLEASE INSERT LABELD - INTEL MATRIX STORAGE MANAGER DRIVER - DISK IN DRIVE A:" "PRESS ENTER WHEN READY."

  The disc that I used in the first place is always in. when I press on enter, nothing NOT to PAST (the USB floppy drive is not yet into action)

  How can I make it work? It is that I can get.

  I DON'T WANT BACK TO VISTA - HELP!

  This could happen if the floppy USB doesn t drive supports the standards of law. Some people have reported on different websites many floppy drives are not recognized.

  However, worry guy. I have a solution ;) (jeaaa: D)

  Try to create a new XP CD using the software called nLite!
  Then, you could include the SATA (Intel Matrix Storage Manager) driver in this new CD and then you could boot from the XP CD again.

  For details and how to use the nLite please Google because there are a lot of useful Web sites.

  Good bye

• USB flash drive not recognized and install

  USB port works fine in my computer, I have Windows vista basic with acer laptop
  but when a usb flash drive is inserted it not recognize and install
  unitentified error of device and driver to the generic sound of end error

  pls help

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  See you soon. Mick Murphy - Microsoft partner

• USB flash drives not error 39 working -.

  Original title: USB flash drives doesn't work do not

  Hello
  My USB flash drives do not work in one of my USB slots. All other USB devices work correctly.
  Device Manager displays a yellow triangle with an exclamation mark next to the hard drive
  Have tried to update the drivers but points out the best drivers already installed.
  Connection drive after that a restart prompt message "driver installation", followed installation failed, error 39.
  I installed the latest drivers for the chipset of my Board.
  I have the Nations United-mounted and re-installed readers all affected.

  Grateful for the help, please.

  conx82

  Hello

  Have you tried the thumbdrive in another computer to be sure that it is still viable?

  ----------------------

  Try a restore of the system back to until the drive disappeared.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -----------------------------------------------------------

  If necessary:

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - anywhere in the area of white/white - point of VIEW, then-
  Show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances. (There may be none.)

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ----------------------------------------------

  This can be useful to determine if the wrong driver is loading.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• USB and drive not recognised on a Mac SuperDrive

  I'm under VMWare Fusion 3.02 with Snow Leopard 10.6.2 as my host and XP as my guest.  When the virtual machine is turned off, I can use connections USB and drive SuperDrive on my Mac without problem.  However, when the virtual machine is on I can't get the host to either recognize but they work under XP.  Is there a way to fix this?

  Thank you!

  In Fusion, Virtual Machine, USB.  Click on "disconnect...". "on each item that you want to stop using in the virtual machine.

  To have the VM not automatically 'catch' a USB specific peripheral (s), in the settings, USB for the virtual computer, uncheck the box or devices.

  Do you similar for the Superdrive, which is registered as a CD/DVD in the Fusion menus and settings.

• Pen do not respond in Fresh Paint Microsoft Surface Pro

  I have a Microsoft pro surface.  Everything works fine except when I use the stylus in 'wet paint '.  The stylus work absolutely fine on all other programs.  However, when I try to paint in "Fresh paint", I have to press to be exceptionally difficult to get barely a brush stroke.  When I use my fingers, paint out of normal.  Y at - it a setting or something escapes me?  I wish I could use the precision of the stylus with this application, as it was one of the main reasons for the purchase of the Surface pro on something like an IPAD.

  San\m

  I re - calibrate the pen.  However, stylus calibration only affects the calibration of the screen.  It does not affect the sensitivity to the actual pressure.  In addition, this problem is only located in the wet paint.  I even tried to reinstall the program.  Is this a known problem with fresh paint and pen input?

  Hello
  I'm a developer with the team of fresh paint.

  I use daily the Surface Pro with the stylus.  In view of all the devices/engineers in our team, we find the pen interaction to work smoothly on the Surface Pro.

  If you don't mind, you would follow with us the Feedback to paint fresh ?  It sounds as if there is a problem any with your specific usage scenario.

• Western Digital USB external hard drive not found by Win XP.

  I have a new USB 2.0 TB WD My Book Essential that my system does not.  I took the first return to BB, thinking it was defective.  A new is similarly, and there is no indication that something is plugged into the USB port.  My system is: 2.8 G P4, 3G of ram, 850 GB on HD 3 internal, under XP SP3.  All 8 USB 2.0 ports work fine on everything else.  My system is well maintained with Virus and Spyware protection and registry cleaning and start cleaning.  Newspaper observer event system is without errors or warnings.  Device Manager reports no problem.

  I tried all the suggestions on bonofan1823 post.  Reinstalled all the drivers and other utilities allowing to scan the USB ports. The drive is formatted NTFS according to WD.  I searched ghosts, 315539 devices. I used the command SFC, 3107747. I ran Microsoft Fix It--I deleted UpperFilters and LowerFilters entries by 925196.

  The WD My Book has its own power supply, all my tensions.  The blue light on the WD drive and it's a small fan is running.  The drive does not appear in disk management or any where.  The icon does not appear on the far right of the taskbar and no audio sound is made when it is plugged into the USB port or powered.

  Someone at - it any other suggestions?  Does anyone else have this problem?

  Thank you.

  Divya R,.

  Thanks for the info.  I've tried the drive on another computer running XP Pro. and it was recognized instantly.

  I found the driver ITS on the website of WD and installed on the computer.  No change, no recognition. WD has also provided a firmware update for the drive that I could not install because he could not find the drive.  I reinstalled the latest version of the BIOS (2005) for the ASUS motherboard.  I used an old record of 250G WD USB years and it still works.

  UPDATE *.

  I bought a $10,00, 3 port USB 2.0 PCI card and plugged.  The WD My Book is instantly recognized and works perfectly. Problem solved.  The problem must be the motherboard ASUS or the BIOS on my P4 system.  I suspect that WD drive information was never getting to Windows XP.

  Thank you

  Lurker38

• Satellite C650D/006: LAN driver not installed in win 7 installation custom

  Hi everyone, I bought a laptop Satellite C650D/006 yesterday from the original owner and he is 5 months old, but I don't like the installation of Windows 7 Home premium 32 bit OEM toshiba so I deleted from the hard drive and installed a complete installation customized windows 7 Edition home premium 32-bit and active with the OEM - COA key on the laptop.

  http://www.MyToshiba.com.au/products/notebooks/satellite/C650D/psc16a-006011/overview#details

  After installation, I noticed that the LAN controller has not been installed in Device Manager so I couldn't of internet connection to run automatic updates of microsoft for win 7,

  I went to the toshiba website and download the driver of network for this laptop and I installed it manually, and after that the laptop has been connected to the internet via an ethernet cable.

  can someone tell me why the LAN Controller software is not installed on this laptop with a custom installation of Windows 7.

  even my new dell and HP laptops install this driver when I do a custom installation of Windows 7, so why not this laptop.

  see you soon

  > can someone tell me why the LAN Controller software is not installed on this laptop with a custom installation of Windows 7.

  If I understand your message, you have deleted the preinstalled Toshiba OS and installed a clean Win 7 OS in this notebook. Right?
  This means that all drivers must be installed after the installation of Windows.
  In some cases the Win 7 use standard Microsoft drivers that are part of the operating system and some devices may be recognized automatically, but in most cases you will need to install the correct drivers.

  > even my new dell and HP laptops install this driver when I do a custom installation of Windows 7, so why not this laptop.
  Than other cell phones use the same chip as C650 LAN card? I doubt not all laptops use the same LAN chip, which means that different driver must be installed.