USB and drive not recognised on a Mac SuperDrive

Similar Questions

• USB Flash drive not working no-V112b

  Unable to content on a USB flash drive, not getting not formatted. It is within the warranty period. How the guarantee?

  Only if the drive was still usable and allowing for the write you to read the summary file but not. A read-only error.

  You declare that you cannot access the drive at all, is - this correct? If so, I would get the replaced disk.

  If you can read the content, not only to write and run this tool to fix this error.

  Reach
  http://www.PNY.com.tw/index.php?CLS=2&mode=download
  Download USB Driver Flash Format Tool (Ufix-II).
  You will need to have installed to extract the .rar of 7 - Zip. It is downloadable for free. http://www.7-zip.org/download.html
  You will extract the downloaded file "RecoverTool_V2.00.42_M1223 8CE.exe" and run.

  IF this is not what is wrong, then the drive is bad. Trying to force the reader to format isn't going to work. Replace it.

  It will be useful.

• USB flash drive not recognized and install

  USB port works fine in my computer, I have Windows vista basic with acer laptop
  but when a usb flash drive is inserted it not recognize and install
  unitentified error of device and driver to the generic sound of end error

  pls help

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  See you soon. Mick Murphy - Microsoft partner

• Apple USB Super drive not supported error message...!

  Hello.

  MBP 17 "in early 2008, El Capitan 10.11.2...

  Just bought a new drive for Apple USB Super brilliant at my local Apple store there are not 30 minutes.  Came home, plugged in and got the error specified in the JPEG format attached, namely "USB Device not supported.

  The details of the message said "The"Apple SuperDrive USB"is not supported on the Mac."

  Wow, is this true?  Now Apple can't even stand their own material?  USB is supposed to be a standard.  They don't build compatibility USB 2.0 in the last great player...?

  Someone at - it this same problem...?

  Thank you...

  Apple USB SuperDrive requires more power than what is normally allowed for a USB device and therefore is not intended for the Mac comes with internal. If you wish, you can operate in editing a plist in the computer files.

  
  (138201)

• USB and DVD not recognize anything it shows that peripheral unknown.

  Original title: USD/DVD does not work.

  my USB and DVD does not recognize anything, it shows device unknown and does not work.

  Hi alexandrebernat,

  You did it all change hardware or software on your computer before this problem?

  For the question USB, you can follow this link & check if it helps.

  USB port may stop working after you remove or insert a USB device

  Reference: Troubleshooting tips advanced to General problems USB in Windows XP

  For the CD/DVD drive problem, you can follow this & check if it helps.

  Your CD or DVD drive cannot read or write media

  Reference: How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  Hope the helps of information.
  Please post back and we do know.

• Why is my 64 GB USB Flash Drive "not a backup location valid?

  I tried to turn it to a previous question, but reading of the Code of conduct for this forum, I discovered that it was inappropriate to do that.  My apologies for this.

  I am running Windows 7 Home Premium 64 - bit SP1, installed using Toshiba recovery disks (I have a new Toshiba laptop, when I got the system I opted to not have a recovery partition).  I just cleaned all the bloatware off Windows, ran Windows Update until there was no more updates for (achieved in this way SP1), and now I have a fresh and clean windows installation, which has never even been to a single Web site.  Now, I am trying to create a system image on a 64 GB flash drive (I won't even finish by using half of it, as my SSD has only about 19 GB used, and which includes the hibernation file (I disabled the pagefile, because paging files are unkind to SSDs))

  Before, I asked if it was possible to manually create a System Image of Windows 7 on a USB Flash drive (big), and I got two answers 'Yes' to two stars of the community. (See my question here)  It is also stated that it is possible on windows.microsoft.com, here.  Note that when windows.microsoft.com stipulates "the system image must be saved on a hard drive, reference is made to automatic creating system images.  If you keep reading, you'll see that the page says that if you want to manually create a a system image, this image of the system may be recorded on optical discs, a USB Flash drive or a hard drive.  If it is possible, then why will I have the following problem?

  64 GB USB Flash Drive inserted--> closed Autoplay dialogue--> Opened "My Computer"--> Right-clicked drive E (my flash drive) and the selected format--> Unchecked 'Quick Format'--> size of the NTFS system chosen and 4096 bytes of cluster--> Clicked 'Format' and acknowledged that all the data will be deleted--> waited a while for the form to fill out, then clicked OK--> closed 'My Computer'--> ejected my flash player by clicking on 'remove hardware safely'--> physically unplugged flash drive--> Grabbed a diet coke with ice--> inserted 64 GB USB Flash drive--> AutoPlay dialog closed--> opens the start--> Clicked "All programs" Menu--> clicked maintenance--> click Backup and Restore Center--> clicked on create System Image--> (scans of program for storage devices)--> my flash drive appears under "on a hard drive" and the words 'the drive is not a valid backup location' appear under my FlashDrive being listed.  For reference, "on one or more DVDs" appears just below the text saying "the drive is not a valid backup location."

  My understanding is that what I just tried to do is create an image of the system on an NTFS partition formatted (with a 4 KB cluster size) 64 GB USB Flash Drive.  But it is not letting me!  I understand that I can't plan the creation of automatic system for USB Flash drives, but according to windows.microsoft.com image and two stars of the community, it is indeed possible to "manually" create a system image on a large USB Flash drive, which I think is what I just tried to do.  If there is another way to create a system image, even more 'manually' than what I do (I'm certainly not afraid of the command line, if I need to use it I'm more than happy to do so), please let me know.

  I have a low-quaility SATA 3.0 Gbit/s notebook HDD in an enclosure USB powered bus at low prices, and I was able to create a system on that image.  However, I expect this device to fail shortly.  I also managed to create a system image on a DVD-r virgins.  I did, however, just spend $85 on a 64 GB USB Flash Drive specifically to store an image of the system, which I expect to use to back up Windows 7 with World of Warcraft installed (total size of drive C will be approximately 50 GB; I have not yet downloaded WoW; "I want to overcome this first).

  Any ideas would be appreciated.  Thank you!

  1st edit: adding links so people would not need to copy and paste to their address bar and said the last sentence of the last paragraph.

  I suggest avoid you the Windows backup program and you get a good commercial backup program. This forum is frought with for a windows problem reports. I know that I was very impressed when I tried it. Two me are familiar with and like Norton Ghost (which I use for 7 years without the 1st problem) and Memeo, which has 30 day free trial and you can buy it for $29.99 - you can download it from http://memeo.com. You can get Ghost for almost nothing (like me), if you look at the sales.

  CNET has a lot of reviews of backup program to

  http://download.CNET.com/Windows/backup-software/?tag=contentBody;sideBar.

  Some of them are free (the last time I checked there are 315), some have free trials (more), and some are buying only (more than 200).

  Good luck.

• USB flash drives not error 39 working -.

  Original title: USB flash drives doesn't work do not

  Hello
  My USB flash drives do not work in one of my USB slots. All other USB devices work correctly.
  Device Manager displays a yellow triangle with an exclamation mark next to the hard drive
  Have tried to update the drivers but points out the best drivers already installed.
  Connection drive after that a restart prompt message "driver installation", followed installation failed, error 39.
  I installed the latest drivers for the chipset of my Board.
  I have the Nations United-mounted and re-installed readers all affected.

  Grateful for the help, please.

  conx82

  Hello

  Have you tried the thumbdrive in another computer to be sure that it is still viable?

  ----------------------

  Try a restore of the system back to until the drive disappeared.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -----------------------------------------------------------

  If necessary:

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - anywhere in the area of white/white - point of VIEW, then-
  Show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances. (There may be none.)

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ----------------------------------------------

  This can be useful to determine if the wrong driver is loading.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP 15-ac025TX (M9V00PA): network controller &amp; USB controller driver not found and wifi not working not

  Hello I bought HP 15-ac025TX (M9V00PA) computer laptop computer laptop.  I installed all the drivers from the HP site, here is the link

  http://support.HP.com/in-en/drivers/selfservice/HP-15-notebook-PC-series/7771404/model/8326084#Z7_30...

  but still driver network controller not found also wifi works do not I installed blutooth drivers too. I use Windows 7 sp1 (32-bit)

  For network controller device ID is PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C & REV_01

  Secondly, univeral serial bus controller driver (usb) not found

  I installed all the drivers on link also updated windows, but still no solution

  the usb controller hardware ID is

  PCI\ VEN_8086&DEV_9CB1@SUBSYS_80C2103C&REV_03

  and finally, I am unable to download the graphics driver AMD/Intel switchable high definition (HD). the download link works not

  KINDLY SOLVE THE PROBLEM

  Thank you

  Update:

  While the pilot I know work is not made yet, I did some detective work and explored some other links from HP broadcom WiFi card driver files, and I found one that should work for you.

  He says that it is for HP desktop PC, they put the exact same form factor of the card wireless to a desktop PC in a laptop.

  I see not why this driver would not work, because the configuration file contains the same hardware ID you have posted.  Here's a partial copy and paste of the setup information file driver, and you can see the hardware ID you have posted is supported by this driver.

  x 86-Win7
  ;
  [BROADCOM. NTx86.6.1]
  % BCM430N_DeviceDesc % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_2230103C
  % BCM430N_DeviceDesc % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_22D3103C
  % BCM430N_DeviceDesc_HPY % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_2232103C
  % BCM430N_DeviceDesc_HPY % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_22D4103C
  % BCM430N_DeviceDesc_HPY % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_149257_1

• USB hard drive not recognized in rescue and recovery

  After having successfully copied all my backups on an external hard drive, now that I have restored my T61 to its factory condition, rescue and recovery refuses to overprinting of the reader. I have made sure it is connected before turning on my laptop, and I also tried to connect only once I'm inside R & R, but nothing makes no difference. I'm desperate to seize my old files so I can continue to work, any help would be really appreciated. Thank you! Sarah

  Me again: by the way, I forgot to mention that my resettled version of Vista is quite happy to recognize the external hard drive - as R & R before I started the restoration process... Sarah

• Re: Qosmio X 500 - USB IDE drive not visible external HARD

  Hello

  Someone was kind enough to educate myself on this problem?

  How to view the contents of an IDE hard drive connected to the USB port on my Qosmio X 500?

  -The drive is already formatted and filled with data
  -LED lights on the outer box, but the disc is not visible in the browser...

  I got my old laptop internal hard drive and I bought a box to be able to connect to the USB port on my Qosmio in order to get my data...
  What is the problem?

  The hard drive come from 32-bit Windows XP and Qosmio with seven 64-bit...

  I need to install a special driver? use a specific software? or configure specific settings?

  Thank you...

  > What is the problem?
  Who knows? If other discs hard USB can be connected properly to the Qosmio laptop, the problem might be related to the connected HARD drive.
  So I recommend this external USB with other computers.
  If the other computers will not recognize it, so the external HARD disk is a problem

  > additional power supply is probably necessary for a HARD drive
  Maybe my HDD USB requires a cable that can be connected to the two USB ports

• Ocean optical usb 4000 driver not installed successfully

  Hi all

  I have 4000 ocean spectrometer optical usb. I want to acquire its data in LabVIEW. For this application, I have downloaded the driver of instruments OR site (http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=7833BD4A31DA1274E04400144FB7D2... I copied the project in the instr.lib directory and install the driver using the Ocean Optics USB4000_vista.inf file as shown in the installation instructions, then I restart my PC and connect the spectrometer and windows was successfully able to install driver for my spectrometer and I was able to run the example VI as well. But the next day when I tried to connect the same device, windows was not able to install the driver and showed the message "not able to install driver. I tried to update the software of the driver from the Device Manager, but it shows "Windows could not install your unknown device", so I uninstall the driver and reinstall it but still got the same error.

  I use LabVIEW 2012 (32-bit) on windows 7 64 bit system.

  Help, please.

  Hello

  Yes, my problem has been resolved. There was a problem in the EEPROM of the spectrometer. It has been altered. So I reprogrammed the EEPROM and the problem is no more exist. Now my system is able to detect the device and data are also acquired using LabVIEW.

  Thanks for your reply.

• MTB usb device drive not installed correctly

  Original title: mtb device usb driver does not not propely? What id o to fix?

  I have iphone 4S... when I connect my Iphone with my pc, iTunes connect with my iphone but pc do not connect with my phone and shows mtb reader usb device not installed correctly. How I solve this problem?

  Hi Isabelle,.

  I suggest you try the steps from the following link:

  iTunes: iTunes Store advanced troubleshooting
  http://support.Apple.com/kb/ts3297

  Hope this helps! Let us know if you have problems with Windows in the future.

• BlackBerry smartphones can not use my bb as usb and can not copy any images or music

  Hello

  I read the post with how to use the bb with USB, I downloaded the drivers USB V5 and I still don't see my bb as a hard drive in the computer, I rebooted the pc and everything...

  Before that, I installed the office and devide manager, Device Manager see my bb but the Office Manager could not if I uninstall it and follow the way of... I'm really lost here, it's my first bb and I have no idea what to do... You will appreciate any help here.

  BTW, mine is a BB pearl 8100

  Thank you!

  Claire

  Hi and welcome to the Forums!

  Since you do not know where to go, I'll suggest to start again...

  (1) strictly regarding the RIM software uninstall from your PC:

  • KB02206 How to perform a clean uninstall of BlackBerry Desktop Software

  (2) download a new copy of the Desktop software:

  • http://NA.BlackBerry.com/eng/services/desktop/
  • I suggest to use the package v5.0 without Media Manager English - which will have everything you need. Optionally, you can DL the USB drivers only, but then you will not have the full DTM application, which helps you keep your BB up-to-date as allows you to perform a backup on a regular basis.

  (3) download a new copy of your OS Package of device:

  • http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  (4) install this OS Package of device on your PC (it changes the RIM Desktop software with the stuff specific to your device on your operator)

  (5) follow these instructions to configure everything to use your BB to your PC:

  • http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=BlackBerryDesktopSoftware&thread.ID=3...
  • You can jump on the download and installation of the Desktop Software market - you already have those.

  (6) with that, everything should work. If this is not the case, here are some troubleshooting tips:

  • KB02640 Troubleshooting USB connections
  • KB15486 Top 10 smartphone BlackBerry and BlackBerry Desktop Manager troubleshooting tips
  • KB00019 PIN code not displayed in BlackBerry Desktop Redirector

  Good luck and let us know how it goes!

• my default calendar on IPhone and IPad has disappeared. I can't see it either on ICloud and do not save on my Mac Book. How can I get it back? Is it possible to return to a previous update in ICloud?

  My default calendar on the IPhone (and IPad) disappeared. I can't see it either on ICloud and make the back not my calendars on my Mac Book. How can I get it back? Is it possible to return to a previous update in ICloud and find?

  Go to iCloud.com using a computer, then settings. When loading this page, look down at left under Advanced and see if you can restore from there.

• Satellite L640 - does not recognize USB and does not start webcam

  Hello

  I regularly get the pop up usb malfunction when built in webcam fails to launch, I booked service, but now it works again. Any ideas what causes this and how can I prevent in the future? My family is abroad, and its function that I use more.

  Thanks in advance.

  Hi europacific,.

  > I get a pop up usb malfunction
  This popup you get exactly? You can post a screenshot of this message? This would be useful.

  Sorry, but what to say on this subject? Some clarification would be useful, and no one knows what operating system you have.

  If you have some problems with the webcam I would try to update the driver for the webcam. You can download it from the official website of Toshiba.