USB can run faster on my Satellite Pro M30

Similar Questions

• Satellite Pro M30 - Win XP - for the brightness of the display FN keys do not work

  I just do a fresh install of win xp on a satellite pro M30 laptop.
  I installed the drivers bt the fn keys (brightness, etc.) will not work if the screen is very dark!

  I tried to update the bios, but it won't let me.
  Also tried to install the common modules but get an error saying that it didn't is not supported on this hardware!

  Can someone please help.
  I think you need to install the drivers in a specific order.
  Is this true? Or y at - it way round this?

  Any help would be appreciated.

  > I tried to update the bios, but it won't let me.
  > Also tried to install the common modules but get an error saying that it didn't is not supported on this hardware!

  To me, it seems that you tried to install applications that are not compatible with this laptop.
  Where did you get the drivers?

  On the European driver of Toshiba in archive page, you can find the drivers for Satellite Pro M30

• Satellite Pro A60 PL: message: USB device can run faster

  Hello!

  I have a problem with the USB 2.0 drivers in my Satellite Pro A60 PL. everytime when I connect the message apear theres USB 2.0 device this device can run faster. What can I do about it?

  Hi guys

  I received the same message. It s not an error but a balloon tip Windows.
  I didn't find the reason for this message because my phone supports USB 2.0 ports too and I also connected a USB 2.0 compatible device.

  I've tired to remove the Device Manager, the controllers and the USB hubs and updated the Win XP operating system to the last State. I've also updated the driver chipset but sometimes (not always) this message again using a disc HARD 2.5 USB.

  I read in some professional computer magazines that this message is normal and it might appears with some SATA external USB hard drives. So you can ignore it.
  It s nothing serious.

  Greetings

• USB 3.0"your device can run faster.

  I recently bought a HP ENVY 15 t-j100 Quad CTO Notebook Windows 7 Professional Edition (PC product #: E1P05AV). Four ports are supposed to be usb 3.0, but sometimes when I put my flashdrive 3.0 in, it says "your device can run faster. I've updated all the drivers and the problem seemed to go away. But recently I have found that if I do not have the flash 3.0 player in the port completely, or if I do it slowly, he sometimes with the same message. Might not have in a sense caused the problem in the first place? It is even supposed to have this message when this happens? Any help would be appreciated.

  Hello cck979,

  I see that you have a problem with 3.0 ports on your laptop and your flash 3.0 player. I will try to help you with this.

  This document may have information and steps that will help you: Troubleshooting connections USB (Windows 7). Generally however if the unit is not plugged in all the way or it won't work not otherwise you will get some sort of message.

  Also have you noticed if this happens with all ports, or a specific port?

  See if the document offers further assistance.
  Thanks for posting on the HP Forums.

• IBM Thinkpad message: 'this machine can run faster with the USB 2.0 hub.

  Original title: Thinkpad USB 2.0 Hub.

  Hello:

  I have an IBM Thinkpad T-21 which is under Ubuntu & Windows xp.  I primarily use Windows XP.  The pop-up that keeps occurring is "this machine can run faster with the USB 2.0 hub.  Can you tell me how to upgrade my USB 2.0 Hub?  Would like to know because I can't sync my Android phone with my computer until I do it. Thank you.

  Are you sure you copied this error message properly?  In other words, he says that the hub could perform better if connected to a USB 2.0 port?  As far as I can determine that the T21 is not come with a USB 2.0 port, even if you connect a USB 2.0 device (for example a hub), the unit will only race as fast as the port allows it.

  What is the brand and model of your terminal?

  It is possible that the message means the opposite (i.e., your computer has a USB 2.0 port, but the hub is only a USB 1.1 device).

  USB 2.0 was introduced in 2001, so if you bought your computer before 2001, it is likely that you use USB 1.1 or 1.0.

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Expand the category of 'USB Bus controllers'.
  If you see the "Enhanced" work for one or more of the listed devices, you have a USB 2.0 port.  If you do not see "Enhanced", you have USB 1.1.

  

  If the problem is that the USB port on the computer is not 2.0, so your only solution is to buy a USB 2.0 PC Card adapter.  Example and example 2
  If the problem is that the hub is not 2.0, then you will need to buy a new hub.

• How can I get the drivers for xp usb / get the device can run faster in the listed ports

  POP UP WITH SAYING HIS DEVICE CAN RUN FASTER IN THE PORTS LISTED, I HAVE THE WIRELESS CARD WIRELESS, MOUSE AND SPRINT U600, CONNECTED TO THE LAPTOP, THE PROBLEM JUST STARTED

  See the discussion of the difference between USB 1.1 and USB 2.0 and why this error message http://ask-leo.com/what_does_the_usb_device_can_perform_faster_mean.html
  If you have an old computer, you do not all USB 2.0 ports or some of your USB ports may be 1.1 e.a. 2.0

  Open the Device Manager (start > run > devmgmt.msc > OK) and expand the "Controllers of Bus USB" section by clicking on the + sign to the left.

  Are there warning icons? If so, provide details

  It will probably take several entries for "PCI to USB Host Controller" or similar terms.  Please report if one (or several) of these entries are for a "PCI to USB Enhanced Host Controller.  If none of the USB controllers is "strengthened", you do not have USB 2.0

• Toshiba satellite pro m30 USB problem

  I have toshiba satellite pro m30 and HP scanjet 4600 scanner.when I connect the scanner directly to the notebok with its ' original usb cable there is no problem. But if I connect the scanner to the laptop with a laptop usb extension cable cannot initialize the scanner. There is no problem if I connect the scanner to the VAIO laptop with usb extension cable. What can I do?

  Hello

  could you describe the difference between the original USB cable and the USB extension cable?

  The laptop and the printer works correctly with the original USB cable, but it seems that the extension USB cable is an inexpensive which does not fulfill the technical specifications and the laptop has a problem with this issue.

  To solve the problem in my opinion you could do an update of the BIOS, look if for your printer is a new driver available and reinstall the USB drivers.

  Also, you could test whether USB, the same problem occurs with other cables.

  Bye Bob

• Can Satellite Pro M30, you help me how I can connect the wire of the COM series?

  Dear Sirs,

  Can you help me how I can solve my problem:

  I have TOSHIBA Satellite Pro M30 computer and as you know there is no Serial Port COM in this model.

  Can you help me how I can connect the wire of series Com (SR232 DATA)?

  Where I connect on the updated satellite of reserve.

  For your information I have is also trailer male sides.

  Concerning

  Ali H. Ba - Aqeel

  [email protected]

  Hello
  you´ve got the alternative to get a PCMCIA Serial Port adapter.
  The Installation was easy to my laptop and runs without problems under Windows XP and 2000.

  Have a try.

• Loudness Radar can run faster than real time?

  My apologies if this has been asked before - I couldn't find an answer to a search.

  Loudness Radar can run faster than real time? Making sure that my levels is ready for dissemination of a television show, I'll have to essentially play through the whole thing to get a global level. Is it possible to have the Loudness Radar go on and give me a general level without having to hit 'play' and go away for a while? I'd like to be able to do in the first, but I'm fine with the export of hearing if that's what it takes.

  I've never had a problem with just dropping the main level (make sure that the Loudness Radar is set to post fader, btw). So in your example, Yes, I turn down the master by 0.9db.

  Speaking of which, my new faster way to manage the volume on the content of the longer emissions must export just the audio format .wav temporary somewhere, then load this file in hearing and its volume tool to know the LKFS level. Then, I take whatever number I get and set the main volume in first to do no matter what level the station/deaf network/tv customer needs. It's a heck of a lot faster, since the hearing can analyze loudness faster than real-time. On 30 seconds, commercials, using the Loudness Radar in Premiere Pro's no big deal, but dealing with half-hour TV series, with the help of hearing on export to .wav is much faster.

• How can I reset password BIOS on Satellite Pro M30?

  Hello!

  I have a portable Satellite Pro M30 and my son has changed my bios password and now I can't even start it! How can I reset the bios? Where is the bios battery out of MB, then reset as in desktop? Is there a jumper for the deal if all else fails? What should I try?

  Thank you all in advance.

  John.

  Hello John

  Remove the CMOS battery didn't help much. If the removal of the BIOS can be so easy, remove the password on the stolen units may be too simple. Please don? t wait that these information will be posted here.

  You can contact the after-sales Service of Toshiba partner. They will remove password for you.

  Good luck!

• Satellite Pro M30 and start USB HDD

  Hello everyone.

  Is it possible for a Satellite Pro M30 (Bios version 1.70) to boot via USB HDD?

  Thank you
  Vittorio

  Hello

  No, the upgrade of the BIOS will change any possibility of starting.

• Satellite Pro M30: Can I update or change the video card?

  Can I update or change my PM735 Satellite Pro M30:Centrino video card / 1.7? Thanks /.

  Hello

  Short and simply answer no it s is not possible because the graphics card of the notebook computer is a small, small chip that attaches to the motherboard.
  The laptop with the desktop, you can compare t. It s a different technology.

  Good bye

• Where can I download drivers for Satellite Pro 4600

  Hello

  Is there any where I can down load drivers for Satellite Pro 4600 please?

  Thank you
  Karl.

  Hello

  You can find these drivers on the European driver Toshiba page.
  I think you didn't look in the folder to ARCHIVE.

  That's why first ARCHIVE-> Satellite Pro-> Satellite Pro 46xx-> Satellite Pro 4600 for all Toshiba drivers for this oldie ;)

  See you soon

• Satellite Pro M30: Upgrade faster wireless (54 Mbps)

  Hi guys

  I am the owner of a Satellite Pro M30:Centrino / 1.7 GHz/15.4 "TFT-W/60 GB/256 MB/DVD-R/RW/LAN/Wi-Fi/i.LINK, which has a wireless card intel 2100 3B wireless, which can go up to 11 Mbps"

  Anyone know if I can switch to another card that can go up to 54 Mbps?

  Thank you

  George

  Hi George

  You can update your device with Toshiba 802.11 g Wireless LAN Mini PCI Card part number is PA3300U-1MPC. On the underside of your laptop, you will find the Wi - Fi card coverage.

• Satellite Pro M30 - WLan does not work

  My Satellite Pro M30 laptop is about 5 years old and is a refurb. Until yesterday, my wireless connection was very good. Although my wireless connection is running with high speed and it is connected, I now cant get on the internet without using the ethernet cable.

  It is certainly a problem with the laptop itself.
  A framework has changed (perhaps with a function key?) or the internel wireless card packed.

  Can anyone suggest anything I can try with the laptop first before you buy an external wireless card?

  Thank you.

  I don't think there is that you can do.

  The wireless network card appears correctly in Device Manager.
  Make sure that the wireless network card is enabled correctly (FN + F8).
  There may be a problem with the WLAN antenna. Who knows?

  Anyway, if you can't get this to work once again use small USB WLAN adapter and be happy.
  To be honest, is not bad idea because new USB WLAN glue can work with G WLAN or even N. The original WLAN card in your notebook is, I guess, old A/b.

  Good bye