USB connection to the desktop

Similar Questions

• BlackBerry smartphones to connect to the desktop computer...

  I used 4.7 OK and it was replicating my contacts and tasks to Outlook 2003.  All of a sudden, it stopped working and just says: connection to the desktop... I tried all cables usual USB re - install software change, different USB ports and scanned the forum.  Pine OK connect options watch my blackberry USB code options.  Bluetooth option is ghost, but I do not use this option... do not know if there is a link.  I have a Toshiba A300 with Bluetooth.  This worked OK until last Friday and I spent most of the weekend trying all the tips Forum.  I run Windows XP if that helps... Mark

  You can just enter any number. I have AT & T and seized my number and it took. If this is not the case, there is a link on the site of berryreview to download.

• Remote assistance - unable to connect to the desktop computer using the remote connection

  Hello

  I'm currently running vista Professional 64 bits for portable and desktop computers.

  Problem:
  -I am not able to connect to the desktop computer by using the remote connection.

  Tried:
  -Setup the remote asstance for the Username (account login) designated
  -looked up the IP address
  -entering the IP then username and password
  Failed connection *.

  Little Question, too:
  -I run behind a router with 3 machines connected to the router, it would change my location from IP address? I think that's where I'm stuck at.

  The following article should you guide through the process and solve your problems:http://www.vistax64.com/tutorials/116361-remote-assistance.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry Smartphones trying to connect with the desktop software for my blackberry

  Hey, M trying to connect with the desktop software for my blackberry torch 9800 and it asks password for the connection. I am using same unlock password I use for my bb but for desktop sofware it shows incorrect... pls help!

  Make sure that you type on your BB, it's what you type in DM. don't forget that the keyboard on your BB is different from the keyboard on your PC. Some people think they are type numbers on their BlackBerry when they are really typing the letters. For example, to use numbers on a BB you must hold the ALT for each button, you push so you have to hold the alt key while typing 1 2 3 4. If you hold down the ALT key on the BB you would really be typed all W E R S. sometimes, people will hit the ALT key once (and not hold the button) before they enter the password and then you get 1 E R S.

  Who is? Make sure that you do not mix numbers and letters.

• Problems of peripheral connection to the Desktop Manager and Apploader.exe blackBerry Smartphones

  Just got a new BB8900 last Friday. On Monday, I met a Reload software: 552 error code and after checking online forums for options on how to fix I finally had to reinstall the operating system and reinstall the new applications, which are not checked by the resettlement process. Because I was afraid to become again this error when I rebooted the machine, I immediately made backups every hour I was reconfigure the device and adding my apps.

  Today I was going to do another backup for good measure, and once I have connected my Blackberry to the computer with Desktop Manager running, Desktop Manager crashed and gave me the following error message:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: DesktopMgr.exe
  Application version: 5.0.0.11
  Application timestamp: 4a4bd539
  Fault Module name: DesktopMgr.exe
  Fault Module Version: 5.0.0.11
  Timestamp of Module error: 4a4bd539
  Exception code: c0000005
  Exception offset: 000d68f5
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: c4a7
  More information 2: 473b2e845affd1758ca8e66121386d63
  3 more information: 83e8
  Additional information 4: 72466a8a5092651f7fe609f9ec3f3489

  I then tried the APPLOADER. EXE program location in program files/common files/research in motion/apploader. I had used this program yesterday to try to remove applications 1 by 1 with the hope that a single request was causing the error 552. Now for some reason any program as a problem to note the following in the error log file:

  Read 1010fffc location caused an access violation.

  I've looked through several forums and have not found a solution. What I can tell you is the following:

  (1) the phone works well, but I'm afraid by restarting the phone and another 552 error (there were two deleted apps that will be entirely deleted on reboot). Hope everything is fine but I got two of these 552 errors within 24 and the second came without any warning. If I get this error there is no way to make my backup since I can't connect to DM without it crashing.

  (2) it doesn't seem to be a timing issue, but I deleted the Intellisync folder anyway and it does not solve the problem.

  (3) have rebooted my machine without change to the problem.

  (4) have reinstalled DM Version 5 (this time without Roxio Media software) without change to the problem.

  (5) because now I get an error when connecting to DM and trying to run apploader.exe, there seems to be a setting on my phone which may cause problems (I don't know what it can be, but the APPLOADER program finds a violation of place then maybe the Blackberry software is confused about where to find my Apps?)

  (6) the BlackBerry Device Manager works fine and takes note of my device and the serial number it is necessary.

  After my last backup yesterday I probably only installed 3-4 other apps that I had lost and organized/moved files on the phone. So get this problem if shortly after that everything worked fine is staggering.

  Another update: it seemed to me I found the problem.  While RIM support recommended I do a reset, I pushed the rest of the phone feature seems to work very well.  I opted to start removing the one phone applications and then try to connect to the Desktop Manager.

  Once I removed the ZDNet Tech News For the IT professional and rebooted the phone, I was able to connect and make a backup. I'm sure this app works very well for almost everyone, but for some reason (maybe it is in conflict with another application on my phone), Desktop Manager does not do that and close. Initially, I reinstalled again and was able to make a new backup but an hour later Desktop Manager stops again (perhaps by doing an update on the news it creates a conflict with the Desktop Manager).

  Indeed summary of learning since my problem seems to be quite uniqueCurve 8900)

  (1) if the Director of bureau stops and you have tried other solutions on the forums such as deleting the folder Intellisync and reinstalling Desktop Manager, try to remove applications 1 by 1 and restart the phone before trying to connect again to Desktop Manager.

  (2) If you have had this problem, frequently make backups and keep track of what you add to your phone in case there is a problem you know the latest apps to remove (in my case, I couldn't go to my last backup since DM would be closed with the conflict of the app).

  (3) only consider a wipe of the device if you have exhausted your apps withdrawal tests.  Apps that came on your phone which notes the seller in the section about the application that RIM should be good.  Also while on AppWorld apps are offered by BlackBerry, there is no certainty that they will work on your phone.

• Could not connect to the desktop PC.

  Hi all

  When users are connected to the desktop view, it displays a black screen and it then closes back to the login screen

  Event log shows that it is impossible to launch the pool and it gives to the user id and shows that the virtual machine is not ready

  Error message on the server view - 'the current session has expired', no error message on the end user system.

  We have recently improved ESXi and this has happened since.

  Thank you

  James.

  Are - what you happened to upgrade VMware tools when you upgraded to ESX? I had to roll back my Vmware tools and then re-install the agent from the view. When I did I uninstalled both components and then uninstalled VMware SVGA 3D card. The you must install tools before the agent of the view. I think the version of the tools I have roilled the back was 9.4.

• To connect to the desktop from the internet view

  Hi all

  I recently installed a view connection Server 5.0 and a manual pool with a single desktop computer in order to access my VMware infrastructure while I'm not at home.

  I redirected the port 443 and 4172 access to connect to the server view and I am able to authenticate but the customer view freezes when I connect to the desktop computer because she needs the internal ip address of the office.

  I don't understand the principle of the use of the customer in view of the internet while each connection to the servers or office uses the internal ip or FQDN address. What did I wrong? What should I do to just plug in my office to view with the client from the internet?

  You must activate the tunnel and the tunnel of PCoIP on the broker for connections (on the admin interface > servers > Connection Broker) and specify the external URL (that you access from internet. for example, vdi.home.com, not the host name internal.)

  You must also specify the external IP address. Is that you expose to the outside.

  Linjo

• "Direct connection to the desktop" and external clients

  Hi all

  I'm doing a View 4 u1 installation with a connection to the server and a security server. I just want to confirm with the setting to view administrator, check box "direct connection on the desktop.

  I find that if I check it, then external clients of internet do not work - can see the office pools, but at launch, the customer will see appear in the taskbar, disappear. When I uncheck, all external clients work very well.

  my understanding is that this check box determines whether RDP traffic will be dug by the connection to the server or it will go straigh from the clients to view offices. I though that this setting affects only internal clients. I don't see how it affects external clients that connect through the Security server.

  When you look at 'netstat' of external clients, trying to run the office, I can see the threshold to appear when the customer view disappears, it will also disappear. Looks like when the box is check (direct connection), the client view external attempts to establish the RDP directly on desktop computers, apparently, it won't work. So, how can a direct connection for internal clients only?

  TCP 192.168.20.2:56473 winxp - 04:ms - wbt-Server SYN_SENT

  any ideas?

  Thank you

  Ming

  In our environment, we have our external users (Security Server) use a broker who has direct connect disabled while internal users use a different set of brokers that are defined to use direct connect.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• "You have been disconnected" error every time I try to connect to the desktop creative cloud application.

  I now get a message "You have been disconnected" whenever I try to connect to the desktop creative cloud application.

  I tried without success to the following:

  1. Uninstall and then reinstall the creative cloud application.
  2. Rename the OOBE centenarians OOBE folder.
  3. The deletion of all in the SLCache.

  All of these answers have been proposed on these forums or support. None have worked.

  I'm on a composition of the team.

  I am currently using Adobe Creative Suite CS5.5.

  I am on a Mac in the Mavericks (OSX 10.9).

  Nothing seems to work and I was forwarded from one Department to the thing of support chat window.

  Someone for the love of God, please help.

  I would like to share with you the solution that worked for me.

  It's the walkthrough, I followed, guided by Tariq to the live Adobe chat service:

  1: open Activity monitor of spotlight and end partner Adobe all processes. You can find the process as AAMupdater, AAMupdater notify, Adobe crash the daemon process.

  2: Open a window in the Finder, select go > go to folder option, type in ~/Library and press to enter.

  3: now navigate to Application Support/Adobe/OOBE /... folder.

  4: delete the opm under OOBE.

  5: OOBE and rename it OOBEold.

  6: Check if you have AAMupdater in the same place.

  7: Please rename it to AAMupdaterold.

  8: click on icon on the desktop creative cloud gear application and choose leave Creative Cloud.

  9: then launch, connect, and click on the applications tab.

• USB problems: When HP Photosmart C4599 is enabled, all other USB ports on the desktop becomes useless

  I just bought a HP Photosmart C4599 and successfully installed the software provided on my HP Pavilion 743c Desktop.  I connected via a USB cable.  I am running Windows XP SP3 and automatic updates are on.  I've updated the software that came with the printer and everything seems to work properly.  I printed and scanned successfully.   However, I noticed that when I connect my memory stick or digital camera via USB, I now get this message annoying that States, peripheral USB not recognized.  The only way to get my computer to recognize my stick of memory or the camera, is to stop my printer and then reconnect my stick of memory or the camera.

  Somehow the printer or the software's a waste opportunity to my computer to recogize the devices that are connected via the USB port.

  I wish I could connect my memory stick or the camera without turning off my first impression.

  Any solution would be really appreciated.

  This usually occurs on computers with older chipsets USB which cannot provide enough power to multiple devices at the same time. The best you can do is try and install the latest drivers for your motherboard or update the BIOS of your motherboard. Otherwise, use only 1 USB device at the same time. Or, buy a powered USB hub and connect the printer or get a new computer.

  In addition, you do something else. Unplug all USB devices from your PC (except the keyboard and mouse). Now just turn off your computer and unplug the power cable from the Tower of the wall outlet. Be it like that for about 20-30 minutes. Now just press the power button on the tower for about 3 to 4 times to ensure that all static electricity is passed, then plug the cable into the wall and turn on the PC and try the two devices to connect to the PC and see if you get the error messages.

  In addition, you can insert the memory stick into the memory card slots printers and view pictures on your computer.

• WD external hard drive connects to the desktop PC

  I have a WD external drive used to be connected to an XP PC.  I've upgraded to a new Win7 PC and tried to connect the external hard drive via a USB to work.  The drive does not appear on the desktop but is listed in the Device Manager.  When I connect the same drive on my W7 laptop it shows fine.  Why can I not see this external hard drive on my desktop PC?

  Check if the drive is visible in disk management you will just be assigned a drive letter, do a right click on it, assign the path and the drive letter, choose a letter available.

  How to use Vista disk management
  http://www.windowsreference.com/Windows-Vista/how-to-use-disk-management-in-Vista/

  Or in the Manager of devices under USB controllers, right-click on the car restarted, uninstalling, it must be reinstalled.

• BlackBerry Smartphones BlackBerry Bold 990 is no longer connects to the desktop via Bluetooth (Version 7.1 Bundle 1646) software

  I've always been able to sync my Bold 9900 using the desktop via a Bluetooth connection software.

  Yesterday I updated to 7.1 Bundle 1646 and Desktop software is no longer recognizes the Bluetooth connection

  My "BOLD" can still associate it with my computer (i.e... I can play my music from my Bold 9900 via my computer) and my computer and the Bold 9900 have indicated that they are paired/connected.  However, the desktop software does not have a Bluetooth with my Bold 9900.

  I tried to manually add the device to the desktop through 'tools' software > 'Add Bluetooth device' but my Bold 9900 is not displayed even by selecting 'Add '.

  Now, I have to synchronize by using the USB connection.  I would go back to the use of the Bluetooth connection.

  Thoughts?

  Information:

  Bold 9900 - Version 7.1 Bundle 1646

  Desktop computer - Version 710_b033

  HP ProBook s 4530 - widows 7

  If RIM has released a new version of the desktop (v7.1 bundle 2108) and BB verisions.  I've updated and now it works!

• Wireless printing for laptop USB connected via the wireless office printer

  How to print from a laptop (Toshiba, Vista 32-bit) on a HPC6250 USB printer connected to a desktop computer wireless (Dell, Win 7 32/64 bit). My wireless modem is ATT U-Verse.  Printer has USB or ability of ethernet cable but not wireless. The modem is not printer ethernet connection is not viable.

  Thanks for any help.

  MRZ

  Hi BH.

  I activated the such LPD service indicated in your link, but it did not turn. When I sailed through the other answers the last one said to remove the spaces in the name of the shared printer. I did it and it seems to work.

  Thank you for helping me with this problem. It is unlikely that I would have found the link on my own.

  MRZ

• How do you keep users to connect via the desktop remotely on another?

  Use: Windows 2008 R2
  Connection method: connection Remote Desktop

  We have users insist on granting of their login and password to another user if that person can connect. Even when they have their own login!

  So what happens is the the two #1 can be saved in on the job server all log in user #2 in the server, with the same login, closing at #1. While I can only educate them to use their own connections, so the saying goes, you can lead a horse to water, but you cannot make them drink. :(

  What I have and I'm not finding, is a way to have the system notify User #2 that login is already in use, try again later.  I would like to accomplish this through Group Policy.

  Thanks in advance for any help!

  Jack W.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• can I connect to the desktop remotely from a macbook?

  I have a macbook at home and a pc/server in the office.  I can remote desktop to connect to my desktop (PC) server from my home macbook?

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for networking on TechNet. Please post your question in the TechNet Windows Forums.

  Diana

  Microsoft Answers Support Engineer