USB dongle and ESX 3.5 license

Similar Questions

• support for USB dongle

  It is my understanding that ESX 4 supports the usb of the virtual machine. I also understand that VMotion does not support virtual machines that use the usb dongles. I plugged a USB stick in the host ESX 4, but I don't see where I need to configure the virtual machine to use the usb dongle. Can you please point in the direction of the documentation or tell me what configurations changes needed to make the visible usb dongle (s) to the virtual machine?

  Graceful,.

  Nelson

  ESX does not support USB transfer, as in VMware Workstation etc. If you need to access USB dongles and also need to vMotion, you can watch the solution USB Anywhere of Digi (http://www.digi.com/products/usb/anywhereusb.jsp). It allows you to access USB devices over TCP/IP network. Works with most Windows systems.

  We have good experiences with this and just love it

• USB Dongle Bridge with wireless static IP XP

  My computer is connected to the wireless router that is connected to the switch through which I am to access other computers.

  Whenever I connect my USB dongle to access internet, my offline wireless network but I am still connected to the router!

  Here, I'm limited to use only one network at a time.

  I tried the network bridge, always even (no advanced layout need to be changed?)

  Tried to ICS (ICS should not use this feature in an existing network with domain controllers Windows 2000 Server, the servers DNS, gateways, DHCP servers, or systems configured for static IP addresses)

  
  

  I'd be very happy that can help solve this problem.
  Thank you
  Lachuu
  OS: Windows XP
  Dongle USB: HUAWEI

  Your problem is probably the "metric".  I'm doing this from memory because I don't have a machine XP here, so maybe it's a little different but...
  Go to your network control panel.  There should be an entry for your USB dongle and the other for the wireless.  For each of them, right-click on it and select "Properties".  In the window, scroll down if necessary, and then double-click TCP/IP.  In the next window, click on "Advanced".  There should be a box here that is usually checked that says "Automatic metric.  What you need to do is to uncheck this check box and enter a number in the field "the Interface metric.  Put a different number for your USB dongle interface and your wireless (for example, 5 and 10) interface.  The smaller of the two numbers will be the adapter that will be used for the internet... so if I read your post correctly, the USB dongle must be the lowest numbers.

  As your USB dongle is probably the slowest connection, it probably by default a metric higher and therefore is not selected when you use the default settings.

  "An explanation of the feature of Automatic metric for the routes of the Internet Protocol"
    <>http://support.Microsoft.com/kb/299540 >

  Good luck
  JW

• Fusion takes over my USB speakers and don't give them back!

  I use VMware Fusion on OS X and Windows Vista.  I have a pair of Harmon Kardon Soundsticks connected via USB.  I have activated their merger via the menu "settings".  The merger is able to use them to read audio data.  So far so good.

  However, when I left the audio for OS X by default Fusion to the internal speaker.  What more, when I go into Preferences system & gt; His, I don't see that the output listed in the tab Soundsticks Harmon more.  It is as if the Fusion 'hijacked' them and returns to OS X.

  I tried to unplug the USB dongle and in plugging it back.  Does not work.  Tried to disconnect and rear connection.  Does not work.  The only thing that solved the problem is to reboot.  Of course, it is a pain.

  Is this a known problem or there at - it a setting I can use to fix?

  A USB device can be directly controlled only by an operating system at a time so if, when you say "when I leave Fusion...". "is stop Virtual Machine target, not suspended, in the guest before quiting OS merger or you're just quiting Fusion and allowing the virtual machine will not target?  If the latter you must eject the USB device in question since the icon remove the device safely in the Notification area of the taskbar, and then disconnect the virtual computer target USB device from the USB icon on the status bar of the Virtual Machine of the target or the Virtual Machine > menu USB before to stop or suspend the Virtual Machine and or quiting merger.

• Issues FTP using the USB Dongle - solution?

  Hi guys,.
  
  I just got a (Vodafone UK) USB dongle and connect online in this way ok - the problem is that Dreamweaver doesn't seem to work with this mode of ftp transfer using a USB dongle.
  
  When I try to edit a page on a Web site, this page goes haywire and become full of gibberish along the lines of:
  
  «op§šdn.0 'Ö ' 0' $ai.k4tai < |'» # »... ETC. ETC........................."
  
  Any ideas why or how do to solve this problem?
  
  Thank you!
  
  

  Now, I found the solution. For reference:

  It seems to be a problem of Vodafone software. To overcome it, do not connect the internet using the shortcut of Vodafone, to place on your desktop, go to the windows start menu > Connect To > and select Vodafone Mobile Connect. If you connect this way, there seems to be no problem of ftp when using Dreamweaver.

• Satellite P10 and Netgear USB dongle use

  Hello

  NETGEAR insist it is a Toshiba system problem...

  Whenever I try to inslall wg111v2 cherif I get... Failed to install... "RegDBCreateKeyEx failed", and/or... "cannot read the control on the Netgear server file.

  I don't have this problem with my other non-Toshiba Office.

  HM, looks like some related software question, but it s easy for netgear say you it s a problem with toshiba. It is like moving around customers as on a chessboard. :(

  But okay, now you´re here and we all will try to help you. You say you don t get the problem on your machines 'NON-TOSHIBA.

  So, I would say that you should first try to recover your machine with the recovery media, and then try to install the USB dongle. If it really works then it was just a problem of software and it s resolved but if not then come back and we'll see the next today.

  Good bye

• For Microsoft Wireless Keyboard and Mouse 5000 USB dongle

  My USB dongle for wireless and mouse 5000 keyboard broke. Where can I find a new dongle?

  Try here:

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  I'm not sure that they will be able to replace the dongle only, I believe that the dongle and the material is matched or paired to work with each other, that way you don't end up controlling a mouse or a keyboard in another room...

  John

• Acer XC-605. I have a wireless usb device and a usb dongle. Can I replace my w wireless card

  Acer XC-605. I have a wireless usb device and a usb dongle. Can I replace my card without extra wire with usb3 Sockets. If so, should what material I go for? Front Sockets have been botched again and are now worse thn useless. Thank you.

  Thanks Asdfguy86. The map you suggested was not good because it was full of size, but, thanks to your liknk, so I knew what to ask and what seearching I just added "low profile."

  My search came up with this https://www.amazon.co.uk/gp/product/B008N3FPXS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

  This has also been enlarged but came with an alternative mounting plate.

  There is a free space above so I was able to move my antenna wi - fi so far and release the slot for pci express to the new card usb3 so I was even able to keep my embedded wireless and bluetooth. What a result!

• USB dongles for Microsoft Mouse 5000 keyboard and wireless.

  Original title: Wireless microsoft 5000 mouse

  my office user return a box full of Microsoft Mouse 5000 keyboard and wireless.
  the problem is all the usb dongle has been remove and put in a box.

  the problem:
  How can I check with dongle usb for wireless devices?

  Hi Jay,.

  Since you are faced with questions about the exact USB dongle to use with the Microsoft Wireless mouse and keyboard 5000 mouse, you can get in touch with Microsoft Hardware Support for assistance.

  How to contact Microsoft if you have questions about your hardware device.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• What ports to use between the server host and ESX license

  Hello

  I've implemented a standalone ESX host and want it connects to the license server.

  Is there anyone knows what port must be open for the connection from the host ESX to the license server?

  Thank you!

  LAN

  27010

  27000

  See http://vmetc.com/2008/11/06/vmware-vi-35-port-diagram/ for full information

• License for Virtual Center 2.0.1 and ESX 3.0.1

  ESX and Virtual Center licenses are retro-compatible? It seems that I can only buy licenses for the current versions of ESX and Virtual Center (vCenter Server), but what I need is additional Virtual Center 2.0.1 and ESX 3.0.1 licenses.

  Yes, they are.

• not detect the USB dongle.

  Hello

  We use VmwareESX, 4.0.0.

  We show USB dongle to the VM server and tries to install the ASPENTECH software.

  Licensing configuration files are present in the USB dongle, it acquires during the installation of products ASPENTECH.

  But the server does not detect the USB dongle.

  While the local computer detects the dongle, and we are able to install Aspentech successfully on the local computer.

  Please suggest if additional configuration on the Vmware server.

  Thank you

  Nitin

  + 91-9970833533

  It is not supported. See the following KB for possible workaround:

  Peripheral USB not supported in ESX host virtual machines

• Help with local USB scanner and VMWare Fusion on DRC.

  Has anyone in the community to find a way to use a scanner USB on a local Mac, accessing a virtual Windows Server 2008 through Remote Desktop Connection 2.0.0?

  Thanks for all of the tracks on it.

  Pillard wrote:

  Just an interesting idea... and it is actually local, on the local network. Hmm, I wonder if it works.

  If LAN, then security might not be a problem.

  Have you ever used an adapter USB-over-IP?

  I have not personally, but there are a lot of messages in the ESX (VDI) forums on the use of adapters USB-over-IP for USB dongles license.  (ESX does support USB at all, hence the need for an adapter USB over IP.)  There was a post asking about the use of the adapter to a USB hard drive.  But since the passage of data of dongles is not a concern, there was a definitive answer as to how it would work for a hard drive.  But a scanner can be a feature of pretty low anyway.

  The problem is the price.  From $ 300.  The most often suggested model is by DigiAnywhereUSB.

• USB dongle security available on 4.1

  Hi all

  I'm trying to make it visible to a USB dongle which is the security key for our phone system software.

  3.5 I had to buy the USBAnywhere, which imitated the usb and I was able to use it. With the 4.1, I believe you can have it attached to the vHost derectly and make visible for virtual servers (Windows).

  Unfortunately I'm not near good enough to do it. I plugged in, but not be able to see him leave the vserver. Can you please let me know what is the procedure for the provision.

  Thank you

  I have not tested it myself, we still use AnywhereUSB, but I found two resources that can help you:

  • Transfer of USB in vSphere 4.1
  • VMware KB: Support USB for ESX/ESXi 4.1

  Best regards, Robert

• Using a USB dongle on a virtual machine in a HA cluster

  I need to install software on a virtual machine in ESX 4.0 cluster, which requires a USB dongle to be fixed in order to run in non-evaluation mode. I just came across a product called AnywhereUSB which seems to be supported by VMware. Can anyone tell if they used this product, it's all good and I'm still going to be able to have this quick vMotioning of VMS, as is currently?

  > I'll still be able to have this quick vMotioning of VMS, as it is currently?

  Yes. You will be able to VMotion VM with USB over IP solution.

  ---

  MCSA, MCTS Hyper-V, VCP 3/4, VMware vExpert

  http://blog.vadmin.ru