not detect the USB dongle.

Similar Questions

• laptop Envy 17 17-j034ca: can not detect the usb flash drives

  Hi, I recently installed windows 7 64 bit on my computer laptop envy 17 17-j034ca. Then, I managed to install all the drivers but it still doesn't detect usb flash drives and I tried to install from the web site of HP and my config but it still does not work

  Please help me

  

  It's ok my sound suddenly computer detects the flash drives normally

• my new laptop does not detect the USB for installing the os

  I bought the new laptop hp 15D009TU . I want to install win7 in there. I have OS configuration is USB, but my laptop does not detect my

  USB key... Please solve this problem as soon as possible...

  Hello

  Install the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66210.exe

  Restart the laptop, then install the driver usb 3.0 below.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66211.exe

  DP - K

• USB port does not detect the USB storage

  Hello

  My company gave me a Lenovo ThinkPad L420 and whenever I connect the USB external storage, I am not able to see it on my computer but I can see the unit on Control Panel devices and printers. Please let me know how activate or activate?

  Thank you

  Sayed Toufiq.

  You can google for it!

  http://pcsupport.about.com/od/Windows7/HT/change-drive-letters-Windows-7.htm

• My USB 2.0 does not detect the USB keys or external hard drives

  I attach my USB mouse and it works fine but I can't detect my external hard drive or memory key USB. Why?

  Try plugging a storage drive (external hard drive or USB key) and go to:
  Control Panel-> administration-> computer management tools
  Under, click on storage disk management
  The storage drive appears in the list at the bottom right? If so, can you do a right click on it and select change drive letter and paths, and assign a drive letter.
  It will now appear in desktop and when you plug it in.

  If the drive does not appear in disk management, can you just tell me if it's a USB port specific, that you are having problems or if readers do not appear in one of your USB slots and also if you tried the discs in another system to make sure that they highlighted it?

• My HP 14 laptop is not recognizing the usb ports and wifi at startup.

  During the last few days I been dealing with the issue that my laptop does not recognize the usb ports and wifi. After several reboots, it works fine. My drivers are up to date, so I don't know why, I'll have this terrible problem.

  Welcome @hildergarn,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi and USB ports on your laptop from HP.

  My first suggestion would be to use the wireless network troubleshooting and Internet tool. At the bottom it will ask you questions to help you diagnose the problem.

  Please take a look at this great Charter called troubleshooting wireless network and Internet. This document will help you to solve the problem of Wi - Fi.

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  You have uninstalled the driver in Device Manager?

  Please try to uninstall the driver in Device Manager by using the following steps:

  • Go to the Device Manager.
  • Expand network adapters.
  • Right-click on all NICs individually.
  • Click on uninstall.
  • Restart the laptop twice.

  How many devices you try to connect?

  What you are trying to connect via USB?

  Are - what you happened to try to use the HP Support Assistant?

  Here is a link to the HP Support Assistant, if you not him have not yet tried. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Here are other troubleshooting steps that may help too. If the USB device does not appear in Device Manager, then it might be a question of power requirement. Unplug the machine and perform the following steps until the device is detected:

  • Reboot the laptop

  • Plug in and wait five seconds.

  • If the device does not appear, try connecting to another USB port.

  • If the USB device is displayed in Device Manager after you connect the cable to a different port, then uninstall and reinstall the software of USB device driver.

  If the device is not recognized in any port, unplug it and go to the next step.

  • Open the Device Manager.

  • Double-click Bus USB controllers,

  • Double-click on a USB root hub,

  • Click the Power tab

  • Click on properties of power supply (if it is displayed).

  Devices need that are connected to the hub are shown, as well as the power they have. If the total displayed power is more than 500 mA, remove the devices and use a hub powered.

  • Continue looking at the properties of the power of each USB hub. If the total power required exceeds the total available power for the hub, then remove a device on this hub to a decrease in the number of consumption.

  • Plug in and wait five seconds. If the device is not recognized, unplug and go to the next step.

  Please note; Remove USB cables at high speed that are more than 3 m (9.8 ft) in length and use cables at high speed that are shorter than 3 m.

  Source: troubleshooting USB connections - please look at this document and follow all the steps in it.

  When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If please re-post and let me know the detailed results of all the troubleshooting steps in this post. Could you please provide me with your model number (How can I find my model number or product number?) also.

  Can't wait to hear from you!

  Have a great day!

• Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do?

  Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.

  What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?

  What model number is the most convenient airport?

  Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.

  In addition, not all drives are recognized.

  The internal drive of the TC must be recognized, but there could be problems as well according to the age.

• Can not configure the Ralink dongle and I am referred to in article 871122 on the Microsoft site to activate zero wireless connections.

  I want to use a USB device to connect to the Internet, as my ethernet card is US I can not configure the Ralink dongle and I am referred to in article 871122 on the Microsoft site to activate zero wireless connections.  How to do this please?

  USB to the Internet connection.

  Hello

  It seems that your dongle is not installed properly. try to uninstall and reinstall the software dongle...

• Windows xp64 does not detect the printer hp laserjet p1102

  Hello

  Windows XP Professional X 64 Edition Version 2003 is installed on my server.  It does not detect the printer HP Laser Jet P1102, it needs of Virtual Port USB 001.  When I connect my printer, Windows does not detect the printer.  I lost the CD for the printer.  When I try to install the printer with drivers downloaded HP, it gets sleep showing message "Connect your USB cable" when it is already connected.

  Also when I try to connect to the printer on my workstation, Windows XP Professional 32-bit Edition, it must be connected, but off, the sharing is lost with other workstations, even if I set the static IP for all.

  Hello

  I suggest you post your query in the TechNet forum. Please post your question in the link for assistance below: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

• CA410 all-in-one will not be installed... does not detect the printer

  Help... cannot install printer s/w

  I have a PC running W7 64 bit

  Printer is all-in-one CA410B... It was installed and running, a couple of days he threw error "missing components" and would not printing software launch.

  Tried to re - install... failed

  Most recent downloaded software file... Tried to re - install... failed

  Removed all... tried to re - install... failed

  Has started at the beginning of the mode... tried to re - install... failed

  Has started at the beginning of the mode... tried to re - install "as Administrator"... failed

  Each time, it happens to the screen to plug the USB cord... I do it... get the "Boing" sound so I know PC has detected the USB device... and I see "Installing message device driver"... but the HP software does not see that... and stop right there.

  See the attached screenshot

  If I check the box to continue without attach printer full installation does not occur.

  In Device Manager, it says "Photosmart Prem c410" if I removethese it will not install

  I guess that W7 is detect the printer and with the help of a driver that is installed, rather than seeing the HP software that? the clues how to get around this, I want to get the complete package installed it again.

  

  Try using the brush included in the CD or download.
  Of the original printer installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://goo.GL/R1hy
  9. use this tool to clean the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damage or loss of data caused by the utility. This step is optional. You can skip if you want.
  http://goo.GL/tbpvF
  10 download the drivers and full software features
  http://goo.GL/VQW7M
  11 start the download to reinstall the printer
  Starting a download:
  1. run the disk cleanup on your computer
  2. download and run the software and the drivers below.
  http://goo.GL/VQW7M
  3. once the download is done retrieve, cancel the download.
  4. click on the start menu.
  5. click on run.
  6. type %temp% enforcement
  7. Locate and open the folder starting with 7z (example: 7zS2356)
  8 open the Util folder
  9 open the CCC folder
  10. run the L4uninstall.bat
  11. once the uninstall is complete, restart the computer
  12 run the Accessories\ System Tools Disk Cleanup
  13. download and install the latest version of Adobe flash player
  http://goo.GL/R1hy
  14 use this tool to clean the system and the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damage or loss of data caused by the utility. This step is optional. You can skip if you want.
  http://goo.GL/tbpvF
  15 download the drivers and full software features
  http://goo.GL/VQW7M
  16. run the download to reinstall the printer

• Windows XP missing HAL. DLL file. CD ROM does not detect the Windows XP installation CD.

  I received the error message to the Windows startup, that I need to replace my Hal.DLL file.  I can't access a safe mode with command prompt, and CD rom does not detect the CD. I have rebuilt the Boot.INI file and still no luck. I tried to put HAL. DLL on a flash drive, but it cannot read it for some reason any. "Cannot develop"...

  Any help would be appreciated!

  Go to the store and buy an optical drive. They are very expensive. No, you cannot use the optical drive of your laptop. You can possibly create a bootable USB key with a distribution of Linux on it and copy the correct boot hard disk files. I say "may" because not all older computers can boot from a USB device. Look in your BIOS to see if your computer has this capability. If he can:

  http://www.pendrivelinux.com

  If you have not backed up your data, then you have trouble. While you're at the store also buy an external hard drive. You can start the computer with a Linux Live CD (in your new optical drive), and copy the files on the external hard drive. Then you can continue to try to repair your computer.

  MS - MVP - Elephant Boy computers - don't panic!

• Computer Windows Vista does not recognize the USB mouse

  Original title: does not recognize usb devices... Im trying to use the mouse... got a new mouse... still does not recognize it

  worked but stopped, got a new mouse and still does not recognize it. I really need it... help please

  Hello

  
  1. do you get an error message?
  2. would either not detected other USB devices in the same port?
  
  Method 1: perform the steps in the article mentioned below and check if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
  
  Method 2: run the Fixit and see if the problem is resolved.
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 3: update the chipset drivers and see if the problem occurs.
  Note: you must contact the manufacturer of the computer to update the chipset driver.
  
  Hope this information helps.

• Windows detects the USB device slowly.

  Separated from this thread.

  I have this problem on a Panasonic F1 - GZ Toughpad. It has a USB 3 port. It has 8 GB of memory, less than half used and it works my a request.

  The USB device is a FTDI USB KEY. This is a feature of full speed USB 2 (12 MB/s) according to the data sheet.

  When I plug a FTDI USB - KEY, it takes several seconds to detect the USB STICK. Also, it takes several seconds to detect when the USB STICK is disconnected.

  However, when I plug in a hub USB, plug the USB STICK in the hub, the detection is less than a second and the detection to be disconnected is less than a second.

  I can't use a USB hub as a work-around, because it is a portable application. Perhaps some of you could use a hub as a workaround. ... If someone has an answer to reduce response time, please let me know.

  The problem was solved by changing the parameters of the Toughpad BIOS for USB 3.0 to 2.0. Now the Toughpad detects the FTDI USB KEY in<1>

  Please note in the previous post, the USB hub is powered and the FTDI USB KEY is not memory flash, it's a serial USB port with a serial number, but only the serial number is available.

• Does not detect the hdmi cable more (very specific scenario)

  Well then...

  Got a monitor 15-HD to hdmi cable and a mac laptop (13 in the retina).

  So when I got all that I put it all together and it worked. I left because there a little bit, everything is plugged in and did not return for some time, so my mac fell asleep at the time wherever I went. Disconnected everything to relax on the couch. I went back and all plugged together again except that now the mac does not detect the cable. Tried a bunch of things with it. Restart, unplug the unit, detection manually, etc...

  Since the monitor is used and recently purchased cable, I thought time to them to test first. Got a laptop PC and plugged into the cable. The monitor and cable worked.

  Tried to connect my mac to the TV with my ps4′s hdmi since I did that a lot before. Also works.

  The problem is literally the combination between the cable and the mac. Which is a problem since I got the reason was to serve as my mac.

  During my research, I saw that specifically leaving the connected hdmi where sleeps your laptop can spoil it supposed to be... I saw it one time so idk if it's true, but it happened to me... and no, it wasn't really a solution when I came across that. Tried Googling this specific problem, but did not meet anything since my problem seems so specific.

  Fast forward to the next day and tried again now that both had little respite between them. Plugged into the HDMI and my laptop starts fading and return to a black screen. The screen would go black usually and so the laptop screen and the monitor would appear once again. sauf_que this time that there not, he just kept it and the monitor has not changed (Yes) it's). Not wanting to let him do that too long I unplugged and tried a different port with an adapter, I have also, since I did 3 holes I could use this for might as well try them all again. But unfortunately, I don't have it trigger anything again. So I went through another round of troubleshooting to try to make it work, but here I am, trying to see if anyone else has had this problem and solved. I am back to wait another day I guess and just hope. If not idk what to do, except maybe to get another cable? I don't know if this would solve it well.

  Hello Kaida W,.

  Thank you for reaching out to the Apple of community support. I'll do everything I can to help you get your monitor works as expected. Our first step would be to restore your System Management Controller (SMC) that allows to manage systems of different material on your Mac. This article will guide you through reset:

  Reset the management system (SCM) controller on your Mac.

  Try it and tell us how it goes. The entire community is here to help.

  Best regards-

• HP Support Assistant on my laptop or desktop does not detect the other machine.

  HP Support Assistant on my desktop or my laptop does not detect the other machine.  They are both on the same network.  Both are HP machines. Both are running Windows 10.  Is normal.  I would like to kind of monitor my desktop with my laptop when I'm away from home.

  @bmedbury

  The behavior you describe is normal - the HP Support Assistant is a program "per computer", in other words, each program HPSA lies and keeps track of just a computer on which the program is installed.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.