USB / hardware drivers

Similar Questions

• HP Notebook V5C88PA #ABG: lack of hardware drivers for laptop

  Install Windows 7, applied all available update of Windows, the following hardware drivers were not installed:

  • Ethernet controller
  • SM Bus controller
  • (Unknown device)
  • AMD USB 3 Extensible Host Controller

  Please let me know where I can download these drivers.  Thank you.

  Hello:

  For the smbus and usb3 controllers, download and install the Chipset AMD drivers and restart the PC.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Ethernet:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp71268.exe

  To provide the driver for the device unknown (there may be some devices that are displayed as unknown), please post the hardware ID of the unknown device.

  To find the hardware ID, click on the unknown device in Device Manager.

  Then click on the Details tab in the upper part of the device window unknown.

  Now you will see a drop-down list of property and it will be set to the Description of the unit.

  On this list and select the 2nd (Hardware ID).

  After the first string of characters you see in the window.

• HP PHOTOSMART 4795: Photosmart 4795 Driver Installer - USB Hardware/Software not found error

  Im running on an Imac bootcamped with win7, downloaded the driver on the site of hp directly support, and this is the first ive problem in a year and a half. Setting im here looking at my device driver details, all this so far and active, and still refuses the installation. I tried, futile full, contact any staff on the issue, and this is my last straw, so to speak. I am a student and I can go without a printer works at home any longer. The error reads as follows:

  -------------------------------------------------------------------------------------------------------------------------------

  HP - Photosmart series C4700

  Results of system requirements

  This computer has been verified to the system requirements to install this product.

  [X] this system does not meet one or more of the minimum requirements for the installation of this product. The installation cannot continue.

  Requirement

  USB DRIVERS

  Details and advice:
  This computer does not have the necessary support from the USB software to allow for the completion of an installation of USB. The installation cannot continue until this is resolved.
  Action required: click Cancel to exit this software installation. In order to install the devices such as a USB device, please refer to your computer documentation or the documentation of expansion card USB for more information on usb drivers.

  USB DEVICE

  Details and advice:

  This computer does not have the necessary support of USB hardware enabled to allow for the completion of an installation of USB. The installation cannot continue until this is resolved.
  Action required: click Cancel to exit this software installation. In order to install the devices such as a USB device, please refer to your computer documentation or the documentation of expansion card USB for more information on usb drivers.

  -------------------------------------------------------------------------------------------------------------------------------
  The help button next to "Retry" in the lower left is grayed out, and the options 'Back' & 'Continue', leaving only "try again" or "Cancel". There is no error code, no other signifiers that might lead me in the right direction.

  Please, any help or speculation is welcome, I'll try salt and wise at this point. And thanks in advance.

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.

  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.

  Now follow the installation and check for the difference.

  Kind regards
  Shlomi

• Gearhead 7500 h unrecognized USB Device Drivers

  I have a Gearhead mini card reader Cr7500H using windows vista service Pack3. When I plug it into the computer, I get a message saying USB Device Drivers not recognized.  Do I need to install the drives.  When I go on the internet I can't fined all drivers.  Need help to install.

  Hello

  Method 1:

  I suggest you run the Microsoft fixit tool and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  I suggest you to see link and check.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  See also:

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

• Will be hardware drivers installed on a guest OS is running even if they do not work on the host operating system?

  Scenario:

  VMware Workstation:

  Windows 7 SP1 64 bit host

  Windows XP SP 32 bit comments

  A scanner and a printer are available for Windows XP hardware drivers.  No hardware drivers are available for Windows 7.

  If the hardware drivers for these devices are installed on the client Windows XP OS will work?

  Thank you.

  Welcome to the community of users.

  The answer is (as usual), it depends on...

  My experience has been the following:

  If your printer/scanner is usb based, there is a reasonable chance that it will work.

  I have an old HP Scanjet (USB key) and an old Belkin UPS (USB) that both require drivers and software that only work under XP. I have an XP VM I'm running pilots of each device and software in and everything works.

  I also have an old LasetJet HP (parallel port) that is not supported directly by Windows 7 and more. For this I used a USB-parallel converter > and in a VM XP, I am able to access and print. A Linux VM also recognizes the printer via the number of series-parallel adapter > and I can print it as well.

  In any case, I only install the drivers for the virtual machine, not on the host computer. In fact, I can't install the drivers on the host computer, even if I wanted to, they can not even the installation of Win 7 and including Win 7-64 bit host.

  If your hardware requires a custom Board, plugged into the motherboard (such as SCSI controllers) used in early scanners, the chances are pretty good it won't work that desktop doesn't pass through for PCI device (or other).

  I had especially good luck with USB devices. (Not all, but most).

  You'll probably just to try it and see...

  Good luck.

• Inspiron 530 'bus SM' and the necessary USB controller drivers...

  Dear Dell's Support Forum:

  Briarguy here, just south of Boston, and today I have an Inspiron 530, I received as a gift to replace my last PC hand made (I am really more used to buildiing my desktop PC, since 1992) which ceased to operate in late July of this year.  I'll also have a Dimension 9200 off insane among the universities of Boston for a new "main office PC", and I would like the Inspiron to my mother for her needs.

  The software drivers only I couldn't easily find the Inspiron 530 were the 'bus SM' and USB controller so-called cases (two USB 'controllers' showing!) in Win - XP Device Manager.  Soneday I hope to upgrade the Inspiron 530 to use Win - 7 home, but before then I would get some help as to exactly where, to the Dell support page that I downloaded most of the hardware drivers to work because I got power find the USB controller drivers and 'bus SM' for this otherwise "works pretty well" Inspiron 530!

  Could someone guide me please to the names of files that these drivers are, and where on this page I might better be able to find them?

  Thank you in advance and Yours Sincerely,

  Dave the BriarGuy

  BUS SM = you have not installed the chipset drivers.  USB 2.0 and up requires Service pack 3 for XP.  Windows 7, 8 and 10 supports the chipset in native mode.

  Description	Supported OS	Download
  Intel Chipset Software Installation Utility for 530abcd/530sabcd, v.9.0.0.1008, A01 Intel Chipset Software Installation Utility for Vistamore details	Windows Vista 64-bit Windows Vista 32-bit
  Intel Chipset Software Installation Utility, v.8.3.0.1013, A00 Intel Chipset driver for XP OSmore details	Windows XP

  You will also need

  • Standalone Service Pack 2 for Windows XP
  • Windows XP Service Pack 3 Standalone
  • Internet explore 8
  • Windows Media Player 11
  • Microsoft .NET Framework Version 2.0 SP2
  • Microsoft .NET Framework Version 3.0 SP2
  • Microsoft .NET Framework Version 3.5
  • Microsoft .NET Framework Version 4.0

• Is it still possible to download a copy of 10.10. I have hardware drivers that don't work through 10.10. THX.

  Is it still possible to download a copy of the system 10.10? I discovered that I have a few hardware drivers that only supports up to 10.10 thru so I need to go back one version. Thank you. Richard

  # Unless you have all ready bought.

• ScanJet g4010: do not install scanjet following usb and usb-hardware driver issue?

  Hello

  I tried to install the scan of a brand new computer and encountered the following problem:

  I downloaded the package of appropriate software (full software and driver) from HP Web site, I start to install and get a message after the first stage (verification of the system requirements). the specific question that the system doesn't have the support of USB-required to complete software installation USB + same question regarding the USB hardware...

  strange because it is a whole new system, and none of the other USB devices have no problem at all... (this happens even without/before plug in the device to scan..)

  I also made an update of the Bios and checked if all USB ports are active and enabled in the Bios, no problem...

  System = dell optiplex 5040, windows 7 Professional 64 bit

  any ideas?

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.

  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.

  Now follow the installation and check for the difference.

  Kind regards
  Shlomi

• Lack of hardware drivers, the Windows Live programs do not work & Microsoft Outlook 2010 is very slow in Windows XP computer.

  Victorinox original title: my PC is in need of serious help!

  I will have questions both of I don't know where to start?

  #1) I think Miss me the hardware drivers, what can I do to check and make sure I have the latest driver updates for my hardware?

  (#2) I have programs such as MS messenger, some programs MS Live Essentials that I can't use, fix, uninstall or reinstall.

  (#3) MS Outlook 2010 is super slow, freezes, don't play well with other programs and finally stops after a while.

  (#4) instead of "restart" my PC stops completely down and don't come back or restart when I said to "restart".

  (#5) according to ARO over 3900 registry errors, which I am sure that is why I...

  (A) I have several MS security updates will not be installed, (all the directions say to change records and do all sorts of things, I don't think I'm qualified for this.

  (B) PC is generally slow and lazy and even if it is a work computer, it's me from being productive, and I don't have the time.  It starts slowly, and I don't know how to "truly" remove startup programs, etc.

  It is a working PC, should be a whole day to re - install Windows on top the other things would have to do to make it fully functional again, drive mapping, loading the programs clients, plug-ins, etc. on top of losing this day there all the work, we would have to pay the computer scientist for that all day. Our guys 'IT' knows all the fancy words for all the 'IT' stuff he does, but he has the patience to follow through and fix things until they are really fixed, it starts simply, then vibrates on a list of things to do after his departure... and it is overpriced, even if he was as good as he thinks he's.  But I have no say in this.  I'm not the admin PC I don't think, but I can run & install programs on the PC.  We use TrendMicro, which I'm not thrilled since I just cleaned my PC my 3rd year Trojan horse was not detected by T.M. but was detected by other things, such as MSE and MalwareBytes.  Where should I start, how to get it all cleaned up, & what should I do to keep it?

  Help!

  Please see the answer above.

  If you have any other questions, I recommend you repost our Technet forums:

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• update hardware drivers Pro (stand-alone x 64) Windows 7 = security

  I try to update all my hardware drivers. for example. : in the Device Manager if I chose Marvel Yukon PCI - E Ethernet Controller I ask to update the driver

  research online...

  then comes up saying "Windows has determined the driver software for your device is up to date.

  However when you go to the website of the Yukon

  http://www.Marvell.com/support/downloads/search.do

  find that there is an update 27/03/12

  my driver version, I got 11.22.4.3

  version of the website 11.45.4.3

  Why windows doesn't see it? and to update it?

  Thank you for your help

  http://www.Sony.co.UK/support/en/product/VPCEC1C5E/updates

• Tecra 9100: error on USB controller drivers

  I have a Tecra 9100, would transfer my pictures from my phone to the computer with a USB cable. It gives error like 'there is no driver installed for this device for USB Bus controllers'.

  Function using windows, he must be, under the title: controller universal serial bus, "Hi-speed USB.2.0 controllers must be enabled' but there are no Hi-speed USB 2.0 between subtitles.

  Could not install a driver or a program from the internet, or is this a hardware problem?

  Thank you.

  Hello

  I think you should check the drivers in Device Manager.
  You can download them here:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• I need USB Controller drivers for my HP Pavilion g6 2235ca computer laptop running Windows 7 Pro 64 bit?

  Thus, it was at least a couple of months that I use my laptop with a single working USB port.

  The other two do NOT work. If I go to the computer in the start menu, make a right click on computer, and then click Manage, then I go to the Device Manager, there is a yellow exclamation next to the (USB) Universal Serial Bus controller.

  When I try to update, Windows 7 tells me that an update is not found blah blah blah...

  This problem has happened since I installed Windows 7 64-bit on 64-bit Windows 8.

  So, can anyone help me find the drivers for the USB controller? Or is it some sort of hardware failure or problem?

  Help, please? Any who...!

  Thank you!

  Hello

  Try to install the driver USB 3.0 on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55501-56000/sp55975.exe

  Kind regards

  DP - K

• IdeaPad Z710 USB controller drivers? (Win7)

  Hello

  I recently had an Ideapad Z710 and have installed a new copy of Windows 7 Professional on this topic. In doing so, I managed to destroy most of the drivers for different systems, but through this forum and helpdesk at my University, that I managed to do almost everything works as it is supposed to.

  My remaining a flag and error with regard to the pilots is the connector for Serial Bus universal, he says "the drivers for this device are not installed. (Code 28) »

  Despite this, I still fully able to use usb, mouse, peripheral storage entries, etc.

  Basically should what driver I download and run? I tried some that I got on the site, but they all said that my computer did not meet the minimum requirements when I tried to run them.

  The hardware ID are, if that's any use:

  PCI\VEN_8086 & DEV_8C31 & SUBSYS_397817AA & REV_05

  PCI\VEN_8086 & DEV_8C31 & SUBSYS_397817AA

  PCI\VEN_8086 & DEV_8C31 & CC_0C0330

  PCI\VEN_8086 & DEV_8C31 & CC_0C03

  Any help would be appreciated.

  Also, I think that my drivers for the trackpad are not complete, although it is usable, multi-touch controls (like the 2 fingers to scroll) don't funtion and when I downloaded the driver of Lenovo for the Z710 precise Touchpad, he said that my computer did not meet the requirements for the driver.

  I managed to find all my drivers at this point. Most of them I found through extensive research on Google, but something that you can try (if the computer has an internet connection) is to go to the driveridentifyer site and run their free app (that's how I found the right touchpad driver).

  The site seems a little shady, but I saw it referenced many times on this forum by community members of high level. Essentially, the application runs a check for what drivers you are missing and then spits out a Web page that lists the drivers you need with links, download if you have a free account to actually download.

  I hope this helps! (Although I recommend that you get an antivirus running first, just in case).

• SM Bus controller and 2 missing USB controller drivers

  Hello and thanks for reading, I recently reformatted my laptop HP Pavilion dv7-6113 cl with windows 7, which is it came with, I just a new set.

  But after getting all the software I wanted and pilots back on this subject that I noticed that two of my USB ports are not working, and two others say they don't 3.0 which I may be wrong, but I'm sure they are.  I've looked everywhere, people say USB drivers are delivered with Chipset AMD drivers, any other with the same problem but different HP laptop has posted on this forum and others that drivers AMD fixed his problem, but he has not worked for me, here the source:

  "For some reason, HP does not only provide the driver of portable computers for all its AMD based AMD chipset on any page of support and driver."

   

  You must install the amd chipset driver from the link below, the first file listed. Who will install the drivers for SM Bus and USB 3.0.

   

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2 ".

  However when I click the link need me somewhere else where AMD wants me to fill my specs pc or automatic detection. that gives me drivers, but does not solve my problem of USB.  He also says: "your system does not support these drivers.

  That's what my said Dev Manager has no drivers.

  SM Bus controller

  (USB) Universal Serial Bus controller

  (USB) Universal Serial Bus controller

  

  In "Information systems" in the topic "Peripheral issue" here is what is stated.

  SM Bus controller

  PCI\VEN_1022 & DEV_780B & SUBSYS_3591103C & REV_13\3 & 2411E6FE & 2 & A0

  The drivers for this device are not installed.

  Universal Serial Bus (USB) ControllerPCI\VEN_1022 & DEV_7812 & SUBSYS_3591103C & REV_03\3 & 2411E6FE & 2 & 80

  The drivers for this device are not installed.

  (USB) Universal Serial Bus controller

  PCI\VEN_1022 & DEV_7812 & SUBSYS_3591103C & REV_03\3 & 2411E6FE & 2 & 81

  The drivers for this device are not installed.

  Here is my system info

  Name of the operating system Microsoft Windows 7 Home Premium

  Version 6.1.7601 Service Pack 1 Build 7601

  Another Description of the OS is not available

  Manufacturer of operating system Microsoft Corporation

  System name ANONYMOUS-PC

  System manufacturer Hewlett-Packard

  System model HP Pavilion dv7 Notebook PC

  System Type x 64-based PC

  Processor AMD A6 - 3400M APU with 4 logical processors, 4 Lossnay, 1400 Mhz, graphics HD Radeon (TM)

  Hewlett-Packard Version / Date BIOS F.21, 13/09/2011

  SMBIOS Version 2.7

  Windows directory C:\Windows

  System directory C:\Windows\system32

  Boot Device \Device\HarddiskVolume1

  The local United States

  Hardware Abstraction Layer Version = "6.1.7601.17514".

  Physical memory (RAM) installed 8.00 GB

  7,48 GB total physical memory

  5.34 GB available physical memory

  15.0 GB total virtual memory

  12.4 GB available virtual memory

  Page file space 7.48 GB

  Paging file C:\pagefile.sys

  HP Pavilion dv7 - 6113cl Entertainment Notebook PC
  Serial number: 5CH1350U9U
  Product number: QE360UA

  All suggestions greatly appreciated.

  Thank you

  The specifications of your HP Pavilion laptop dv7-6113 cl Entertainment, clearly indicate that this model has 2 x USB 3.0 SuperSpeed in most 2 ports-port Universal Serial Bus (USB) 2.0. Please try the AMD Chipset Drivers (Chipset, USB 3.0, SATA/RAID). or looking for HP SP61462.exe

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• USB device drivers

  Hello I have a Pavilion dv6-6145dx and I tried to install the drivers for the USB 2 ports work well the other two are not plug and play does not recognize and sends an error code "the drivers for this device are not installed. (Code 28) "for this model, I installed USB 3.0 Host Controller Utillity and only two USB ports, those that I have work have an ID PCI\VEN_1022 & DEV_7812 equipment & SUBSYS_358B103C & REV_3 don't know why. I tried to uninstall the device to see if the plug-and-play pick upward, but no luck. I tried to manually give the path of the driver file in the 7z file. I even tried to give him the same path as the other USB ports on its drivers to see if he could detect the drivers no chance. I'm at a loss... any help would be greatly appreciated

  Interesting...

  These are the drivers that you need.

  Here's a partial copy and paste information of USB3 driver configuration file that shows the support of the drivers for the hardware ID you have posted.

  [SourceDisksFiles.amd64]
  amdxhc.sys = 1, \x64

  [DestinationDirs]
  DefaultDestDir = 12

  [Manufacturer]

  [AMD. NTamd64.5.1.1]
  % AMDXHC. DeviceDesc % = AMDXHC, PCI\VEN_1022 & DEV_7812
  % AMDXHC. DeviceDesc % = AMDXHC, PCI\VEN_1022 & DEV_7814

  I have two suggestions for you to try, and if they do not work, I suggest you to reinstall W7 and install these drivers, now that you know which ones you need.  The usb filter driver is installed after installing the usb driver 3.

  OK... first suggestion:

  Try to manually install the driver as follows...

  Go to Device Manager and click on the usb controller requiring driver.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp61462.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart.

  If this does not work...

  Second suggestion: install directly from AMD chipset driver package and restart.  1 file on the list.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064