USB - if hci host controller

Similar Questions

• HP ENVY 14-2000 CTO - Renesas USB 3.0 Host controller 'start of cannont device (Code 10)"

  HP Envy 14 using, Windows 7 ultimate (64 bit), with a Targus USB 3.0 docking station. Use laptop for almost a year. Relatively few problems, but more and more lately. Last is a failure of the device. Device Manager reports a failure with the Renesas Electronics USB 3.0 Host controller and says 'Cannont start (Code 10) device' in the properties. I unplugged/plugged the USB cables. I have powered down/up to the docking station. I have disabled/re-enabled USB 3.0 device. I have uninstalled/reinstalled USB 3.0 driver. (Worm 2.0.34.0, of sp53286.exe on the site of HP supprt) I made this other laptop and docking station drivers are up-to-date. I rebooted several times... Is there a solution?... or my USB 3.0 chipset out crapped?

  Solved. Downloaded driver (not available on the HP support site) http://drivers.softpedia.com/get/Other-DRIVERS-TOOLS/Renesas/Renesas-Electronics-uPD720200-uPD720200A-USB-30-Driver-21320.shtml 2.1.32.0

• Where can I get AMD USB 3.0 Host Controller for windows 7 (32 bit) of

  Original title: ask questions about Windows 7 usb

  do someone know where do I go to download amd usb 3.0 for windows 7 32 bit host controller, because everything I downloaded it isn't on the Manager of catalyst for a lot of software on the catalyst instalation, host controller usb 3.0 in my google search.

  Thank you people

  Hello

  Thanks for posting your query in Microsoft Community.

  • What is the brand and model of the computer?

  You should be able to download AMD USB 3.0 Host Controller for Windows 7 (32 bit) of the support of the computer manufacturer Web site.

  For example: If you have Lenovo PC, you can check: AMD USB 3.0 hub and host driver controller for Windows 7 (32 bit, 64 bit)

  Similarly, you can type www.support. .com and search for the driver.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Recurring question Renesas Electronics USB 3.0 Host Controller

  Hello

  I get this question contextual all a few days/weeks/months and she has been driving me crazy, but I think I have narrowed down and would like tips are possible please.

  Question:

  USB 3.0 Host Controller error Code 10

  USB 3.0 ports front and back go dead.

  Cause:

  I don't know at all, I feel that perhaps it is TuneUp Utilities 2013/14 or maybe my smart phone Samsung Galaxy S3.

  Difficulty:

  Uninstall/remove up to present drivers, by restarting and installing fresh drivers do not work. He used also but the last 2-3 times, I couldn't get the error to go away as a result of this process.

  I talked to a technician Support of Dell by phone and by working together, we found to be a BIOS problem, since a full format of the PC still had the error when he brought upward once again, leaving only the hardware itself (USB 3.0 ports) or BIOS.

  Bringing F2 menu and make a F9 reset by default a F10 save and exit solves this problem, every time.

  So what is a BIOS issue or a compatibility issue?

  I know how to fix it temporarily, but I don't know the cause.

  Data sheet:

  Alienware Aurora R4

  3970 X 6 @ 3.5 extreme core I7 (turbo boost 4.3)

  NVIDIA GeForce GTX 690

  Windows 7 Ultimate 64 bit

  Internet Explore 10

  32 RAM

  Liquid cooled

  3 TB Seagate hard drive

  BIOS A07

  If you would like more information, please let me know.

  I have no discharge reports that the PC did not yet have a BSOD, but this is a replacement PC after the last (same PC and specs) had exactly the same problem and basically could not be fixed by a Dell technician.

  OK, that sounds good.

  What I might suggest at this stage is to put the service 'Windows Driver Foundation - User-mode Driver Framework' to 'auto' as this can help with any problem of detection:

  Start > type services.msc in the box "search programs and files", then press "Enter".

  In the right window to scroll down to the "Windows Driver Foundation - User-mode Driver Framework" service and double-click it and set the "Startup type" to "Automatic" > OK

  Then, restart the computer.

  Then, if Renesas USB 3.0 controller number happen can you create and provide the .evtx, and nfo files to the exact time.

• is it possible to install USB HIGH SPEED HOST CONTROLLER DRIVER to ONE OF MY USB PORTS to RUN MY CAM AND webcam

  I have Dell Optiplex gx 150 intel pentium 111. Windows xp pro service pack 3. I get a baloon saying there is no port high flow installed on my pc, now I need material or the right drivers to make it work properly. ICAN get my cam digital to work, but I get the ball, saying that I have to install the drivers of controllers host high speed to do my camera to work faster. Now the webcam does not light but I do not get a pic and it gets the same ball to get a host controller driver high speed to make it work right. So I need a piece of hardware or just the drivers on my very old but the pc work great. Please try to answer this question in advance.

  Hello

  You can update the drivers for this chipset. Contact the manufacturer of the computer and check.
  Also, check the link below:
  Support USB 2.0 in Windows XP: finally high speed
  http://www.Microsoft.com/windowsxp/using/networking/learnmore/jones_02august05.mspx

  I hope this helps.

• Standard enhanced PCI to USB Host Controller & USB OpenHCD Standard host controller drivers

  Hello

  Improved my Standard PCI to USB Host Controllers & Standard OpenHCD USB host controller drivers are no longer works. My USB ports have stopped working completely.

  I tried to uninstall, reboot, reinstall, but Windows cannot reinstall the drivers itself. I get a code 19 for each of them. "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  I did not anything out of the ordinary except for an update of the computer, but I tried the system restore and it still does not fix my problem. I suggested either a new reinstall of Windows or to "press F11 on startup to restore my computer to factory settings.

  I tried deactivating and reactivating. That did not work. The only thing I have not tried also the factory reset setting is reinstall my chipset, but I don't know how or what chipset I have, I just know it's AMD and ATI.

  My computer is a HP Compaq Presario CQ61-420US with 3 GB of RAM, AMD Athlon II Dual Core processor, I have Windows 7 Home Premum 64-bit.

  I have tried everything that I could, even went in safe mode, uninstall and re-install my drivers, but it didn't work. I really need to get this problem solved, I really need my USB ports and I don't know what to do.

  Try the following:

  Start by creating a System Restore Point.

  Double click on the UpperFilters and remove usbfilter > OK

  Then, restart the computer.

  The reference to the usbfilter is probably not valid and removing wil restore the default UpperFilters which is empty.

• Win XP - Renesas uPD720201 USB 3.0 Host Controller - does not not :(

  Hi all

  I need help because I have problems getting my new usb 3.0 PCIe card to work.

  Basically, I myself had this USB 3.0 PCIe card (so can finally have the best on-the-go transfer speeds).

  It establishes he needs a "slot PCI-Express must be version 2.0 or later" to get the USB 3 speed of 5 Gbps; otherwise version 1 will be limited to 2.5 GB/s.

  I have the Asus P6T motherboard that has:

  2 x PCIe 2.0 x 16 (dual x 16, blue)
  1 x PCIe 2.0 x 16 (x 4, white mode)
  1 x PCIe x 1
  2 x PCI

  This image will help you.

  My understanding of this is that I have a small white that is version 1 (directly under the first blue PCI - E version 2), where my graphics card is installed. The following PCIe which is version 2 is the following under small white (big one blue) by another white to x 4. I have installed PCIe card in the "PCIe 2.0 x 16 (x 4, white mode). I've also attached the required SATA power cable. I can't install the USB connector before (19 pins) as my current case uses USB 2.0. Fix the case it has front usb 3.0 in the future.

  For after this forum, I installed the card properly. Is this correct?

  I think it's okay, because the red light of PCIe card seems lit inside my case AND (b) because I can see the USB 3.0 controller host listed in the Device Manager.

  However, when I connect my usb 3.0 flash memory stick scandisk, it's the blue light flashes but in Windows XP > My Compputer device does not appear?

  I try in my USB 2.0 and it is formatted in FAT32 and also works perfectly fine, so I know it isn't my USB pen.

  I use the 3.0.23.0 driver version

  I don't know about the firmware.

  Thanks in advance for any help on this.

  Hi all

  To inform, I got it to work. Had to update the firmware, but could only do by installing the PCIe card in the first small PCIe slot.

  Here is a link to the firmware update (only worked in Internet Explorer for me).

  You can also download the driver to date since there too.

  After the firmware update, I uninstalled the driver (using the Add/Remove Programs entry). Shut down the PC. Moved the PCIe card in the greatest location PCIe which is version 2.

  Thanks for the other tips if ever less.

• Intel 5 series chipset family improved usb - 3B 34 host controller /3400series

  a new laptop from asus k52f says usb need trouble shooting, but used new drivers and download

  5 series /3400chipset 2 b 34

  Hello

  I suggest you try check and troubleshooting hardware and devices runnming if this can help:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It will be useful.

• expandable usb 3.0 host controller driver not install

  I just installed windows 7 x 64 on my inspiron 15 3542 and I cannot get the driver usb 3 to install I get this error message "the computer does not meet the minimum requirements for installing the software.

  

  blugrana

  I just installed windows 7 x 64 on my inspiron 15 3542 and I cannot get the driver usb 3 to install I get this error message "the computer does not meet the minimum requirements for installing the software.

  

  Hello

  We suggest that you install the drivers in this order:

  Chipset: http://downloads.dell.com/FOLDER02013085M/1/Chipset_Driver_DKG7G_WN_9.4.0.1026_A00.EXE

  Driver IMEI: http://downloads.dell.com/FOLDER02007773M/13/iMEI_Driver_Intel_A00_W732W764W8.164-SETUP_ZPE.exe

  USB 3.0 driver: http://downloads.dell.com/FOLDER02009821M/11/USB3_Driver_Intel_A00_WIN732WIN764-SETUP_ZPE.exe

  Touchpad drivers: http://downloads.dell.com/FOLDER02508210M/1/Input_Driver_33DCD_WN_18.1.16_A01.EXE

  Audio - http://downloads.dell.com/FOLDER02011713M/12/Audio_Driver_Realtek_A00_W732W764W8.164-SETUP_ZPE.exe

  Setting quick app: http://downloads.dell.com/FOLDER02009539M/13/Quickset_Application_Dell_A00_W732W764W8.164-SETUP_ZPE.exe

  Sure that your system should work fine... Repost once it has been... Thank you.

• usb 3.0 host controller driver missing HP Pavilion g6-2290sx

  
  

  Hello

  Try the driver on this link.

  FTP://ftp.HP.com/pub/SoftPaq/sp55501-56000/sp55975.exe

  Kind regards

  DP - K

• USB - IF XHCI HOST CONTROLLER HAS A DRIVER PROBLEM

  JUST BROUGHT A LAPTOP TOSHIBA AND ALREADY HER SHOWING ME A PROBLEM

  WITH A DRIVER. HOW AND WHERE CAN I REINSTALL THIS DRIVER?

  Hello

  Try this and let us know if you are still having a problem.

  Use this link and run the Intel Driver Update utility

  B Eddie

• Satellite Pro 6100 - USB host controller

  USB host controller

  Hello

  And what do you know about USB host controller? Do you need drivers or you have problems with the USB ports?

  Please explain your problem detailed in a few English phrases that others here can help you.

• USB - IF xHCI USB Host Controller

  Hello

  I found the USB - if xHCI host USB in Device Manager not compatible controller and the error is (this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)).

  The operating system is Windows 8.

  Please yor need support to work this device correctly.

  I want you to know I solved this problem on my 7200 DV7T. I downloaded the latest drivers from Intel's WiDi:

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & DwnldID = 22016 & ProdId = 3227 & lang = eng

  These seem to be more recent than those provided by HP. I have installed all drivers you first (display, chipset, etc.), then I installed the WiDi software (link above). The USB - if USB Host Controller xHCI has been recognized very well. No more unknown device.

  I hope this helps.

  Jim

• Saturday A300 - USB ICH8 Family USB Universal Host Controller does not work

  Device: Intel(r) ICH8 Family USB Universal Host Controller - 2830 until 2836 and 283 has

  DriverVersion is: 8.0.0.1008
  DriverDate: 15.09.2006

  does not work!

  Can someone help me? Where can I find the real driver?

  Thanks in advance.

  Chris

  The Intel Chipset driver support USB drivers. You can download it from the Support/Drivers from Toshiba website.

  But if you have recently installed a strange USB device (perhaps a keyboard/mouse/drive HARD USB), the driver may be contradictory. If you remove this driver from Control Panel-> features of the program first, and then reinstall the Intel Chipset driver.

• How can I add a USB host controller high-speed to my PC?

  My OS is windows xp home edition. I get this message that the HI-SPEED device attached to Non HI-SPEED USB Hub.

  The USB Composite device is a USB HI-SPEED device and will function at reduced speed when plugged into a port not HI-SPEED.

  There is no host controller USB HI-SPEED installed on this computer.

  Recommendation: You add a USB host controller high-speed on this computer in order to get maximum performance.

  So, how can I add this USB host controller high-speed to my PC? Is - this material I must add and physically install to my PC?

  As always, any help is greatly appreciated.

  Thank you!

  drake68

  Hi Drake,

  Review the devices USB connected to your PC and make sure that there is not a USB 1.x device connected to the same USB HUB (front or rear).  USB 1.x devices will cause the USB HUB at the bottom shift to 1.x speeds.

  You have an old PC (2002), it is possible that your PC does not have a USB HUB 2.0.  In this case, you need to install a USB PCI adapter card.