Win XP - Renesas uPD720201 USB 3.0 Host Controller - does not not :(

Similar Questions

• Recurring question Renesas Electronics USB 3.0 Host Controller

  Hello

  I get this question contextual all a few days/weeks/months and she has been driving me crazy, but I think I have narrowed down and would like tips are possible please.

  Question:

  USB 3.0 Host Controller error Code 10

  USB 3.0 ports front and back go dead.

  Cause:

  I don't know at all, I feel that perhaps it is TuneUp Utilities 2013/14 or maybe my smart phone Samsung Galaxy S3.

  Difficulty:

  Uninstall/remove up to present drivers, by restarting and installing fresh drivers do not work. He used also but the last 2-3 times, I couldn't get the error to go away as a result of this process.

  I talked to a technician Support of Dell by phone and by working together, we found to be a BIOS problem, since a full format of the PC still had the error when he brought upward once again, leaving only the hardware itself (USB 3.0 ports) or BIOS.

  Bringing F2 menu and make a F9 reset by default a F10 save and exit solves this problem, every time.

  So what is a BIOS issue or a compatibility issue?

  I know how to fix it temporarily, but I don't know the cause.

  Data sheet:

  Alienware Aurora R4

  3970 X 6 @ 3.5 extreme core I7 (turbo boost 4.3)

  NVIDIA GeForce GTX 690

  Windows 7 Ultimate 64 bit

  Internet Explore 10

  32 RAM

  Liquid cooled

  3 TB Seagate hard drive

  BIOS A07

  If you would like more information, please let me know.

  I have no discharge reports that the PC did not yet have a BSOD, but this is a replacement PC after the last (same PC and specs) had exactly the same problem and basically could not be fixed by a Dell technician.

  OK, that sounds good.

  What I might suggest at this stage is to put the service 'Windows Driver Foundation - User-mode Driver Framework' to 'auto' as this can help with any problem of detection:

  Start > type services.msc in the box "search programs and files", then press "Enter".

  In the right window to scroll down to the "Windows Driver Foundation - User-mode Driver Framework" service and double-click it and set the "Startup type" to "Automatic" > OK

  Then, restart the computer.

  Then, if Renesas USB 3.0 controller number happen can you create and provide the .evtx, and nfo files to the exact time.

• WIN Pro 8, xbox 360, z axis wireless controller does not

  WIN Pro 8, Microsoft Xbox 360 wireless controller, z axis does not.

  Axis Z work in the calibration screen, but not in the test screen or in the games must be a driver problem, advice?

  Have deleted the driver to allow windows to reinstall the drivers.

  Installing the windows driver software 7 for the controller, still the z axis only work in the calibration screen.

  I thought that I had the same problem, but see the knowledge base article: http://support.microsoft.com/kb/2757006

  Apparently, the problem is only with the test itself dialog box. I also jumped to the conclusion that it must be a driver problem and expects the controller does not work properly in games.

  However, the controller DOESN'T seem to work properly in games.

  (Mine is actually a Logitech F710, but it uses Xinput anyway).

  I hope that your Z axis controller also works outside of the test application, and the information above helps dispel the confusion around this issue.

  There is no problem with the drivers or controller, everything works (read below for the explanation and solution)

  I had the same problem, with the z axis (Left Trigger (LT) and right trigger (RT)) with a 360 wireless controller by using the adapter on Windows 8 Pro 64-bit wireless controller.

  He would not show the entrances to trigger (z axis) on the calibration screen. Looked online and came across this thread in hopes of finding new update of drivers, or a solution.

  After reading the post I quoted above, I decided to see if the z axis works in the game, and he does. I tried Street Fighter X Tekken, went to training mode and you can view entries button on the screen, and pressing the RT and LT trigger buttons, they are part of the game and my character not the corresponding move associated with the key as well as to show the button based directly on the screen.

  I went then the game controller settings in windows 8 and again once the game controller dialog box does not show the LT and RT (z axis) entered.

  Solution: the controller works fine, and not showing is not the z axis is only a cosmetic problem with the Controller dialog box. So just ignore the controller, the z axis dialog box still works in games.

• Saturday A300 - USB ICH8 Family USB Universal Host Controller does not work

  Device: Intel(r) ICH8 Family USB Universal Host Controller - 2830 until 2836 and 283 has

  DriverVersion is: 8.0.0.1008
  DriverDate: 15.09.2006

  does not work!

  Can someone help me? Where can I find the real driver?

  Thanks in advance.

  Chris

  The Intel Chipset driver support USB drivers. You can download it from the Support/Drivers from Toshiba website.

  But if you have recently installed a strange USB device (perhaps a keyboard/mouse/drive HARD USB), the driver may be contradictory. If you remove this driver from Control Panel-> features of the program first, and then reinstall the Intel Chipset driver.

• Win7 SP1 - "Standard Enhanced PCI to USB Host Controller" does not start now

  After I installed Win7 ultimate SP1 fine, I've now that in the Device Manager for the "Standard Enhanced PCI to USB Host Controller" device: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  Has found the solution on another site.

  In Device Manager, click the Standard PCI enhanced USB host controller that shows an error, just was two more separate the two display errors on mine, choose to uninstall, both. Then click Action - Scan for hardware changes at the top, Windows reinstalls them both and has done so well here for both.

• expandable usb 3.0 host controller driver not install

  I just installed windows 7 x 64 on my inspiron 15 3542 and I cannot get the driver usb 3 to install I get this error message "the computer does not meet the minimum requirements for installing the software.

  

  blugrana

  I just installed windows 7 x 64 on my inspiron 15 3542 and I cannot get the driver usb 3 to install I get this error message "the computer does not meet the minimum requirements for installing the software.

  

  Hello

  We suggest that you install the drivers in this order:

  Chipset: http://downloads.dell.com/FOLDER02013085M/1/Chipset_Driver_DKG7G_WN_9.4.0.1026_A00.EXE

  Driver IMEI: http://downloads.dell.com/FOLDER02007773M/13/iMEI_Driver_Intel_A00_W732W764W8.164-SETUP_ZPE.exe

  USB 3.0 driver: http://downloads.dell.com/FOLDER02009821M/11/USB3_Driver_Intel_A00_WIN732WIN764-SETUP_ZPE.exe

  Touchpad drivers: http://downloads.dell.com/FOLDER02508210M/1/Input_Driver_33DCD_WN_18.1.16_A01.EXE

  Audio - http://downloads.dell.com/FOLDER02011713M/12/Audio_Driver_Realtek_A00_W732W764W8.164-SETUP_ZPE.exe

  Setting quick app: http://downloads.dell.com/FOLDER02009539M/13/Quickset_Application_Dell_A00_W732W764W8.164-SETUP_ZPE.exe

  Sure that your system should work fine... Repost once it has been... Thank you.

• Standard PCI to PCI Bridge and Standard PCI Enhanced Host Controller does not properly

  My AVG Pro tells me that I currently have two problems that can affect the graphics and/or the speed of my computer.

  (1) PCI Standard PCI bridge to PCI does not work

  (2) standard Enhanced PCI to USB Host Controller device is not working properly

  I tried the opportunity to search for a driver that is updated with each problem and achieve the same result for the two problems, that "I have the most recent drivers available. I also tried to uninstall each problem the appliance but they keep reappearing.

  These two elements to appear more than once, but each item shows an instance with an exclamation mark.

  I need to know if it's a hardware problem, that I need to replace the hardware.  Thanks in advance!

  The two problems are related to the software/driver from chipset MB... Go to web youre pc hardware (intel, amd, etc.)

  Locate & download the latest version of the chipset software... If intel, go to intel.com/support/software,drivers

  Look for the update utility from intel, it will scan & offer updates of any pc processor intel... Or find the manual in

  downloads/chipset Intel software Run: Msinfo32 in the run to see the details of the pc hardware

• HP ENVY 14-2000 CTO - Renesas USB 3.0 Host controller 'start of cannont device (Code 10)"

  HP Envy 14 using, Windows 7 ultimate (64 bit), with a Targus USB 3.0 docking station. Use laptop for almost a year. Relatively few problems, but more and more lately. Last is a failure of the device. Device Manager reports a failure with the Renesas Electronics USB 3.0 Host controller and says 'Cannont start (Code 10) device' in the properties. I unplugged/plugged the USB cables. I have powered down/up to the docking station. I have disabled/re-enabled USB 3.0 device. I have uninstalled/reinstalled USB 3.0 driver. (Worm 2.0.34.0, of sp53286.exe on the site of HP supprt) I made this other laptop and docking station drivers are up-to-date. I rebooted several times... Is there a solution?... or my USB 3.0 chipset out crapped?

  Solved. Downloaded driver (not available on the HP support site) http://drivers.softpedia.com/get/Other-DRIVERS-TOOLS/Renesas/Renesas-Electronics-uPD720200-uPD720200A-USB-30-Driver-21320.shtml 2.1.32.0

• Corsair Flash Voyager GT 32 GB USB 3.0 thumb drive does not work after the upgrade to Windows 8 Pro

  Hello

  Since the upgrade of my Windows 7 Ultimate SP1 x 64 Windows 8 Pro x 64, my Corsair travel GT 32 GB USB 3.0 Flash USB key no longer works when plug it into my USB 3.0 port on my laptop. I get an error that the "peripheral last USB connected to the computer has malfunctioned and Windows does not recognize it." I looked for someone with a similar problem and came across this answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Sony-microvault-USB-30-8gb-thumb-drive-not-working/8815a9bd-ee62-41EC-8116-a2a03d6f2bbf

  I tried the solution (method 1) on this page, however, Windows reports that it was unable to solve the problem of equipment.

  Is there anything else I can try to solve this problem? The USB key works in the USB ports 2.0, and it worked in the USB 3.0 port when you run Windows 7 Ultimate SP1 x 64.

  Kind regards

  Andreas Ball

  Hey, I contacted Corsair about this, and they say that it's a driver problem in Windows 8 and I need contact my laptop computer manufacturer for the latest drivers for it, but even if my manufactuer are full steam advertising upgrades of Windows 8, they say they do not support it fully yet...

  The host controller my laptop use of USB 3.0 is 'Renesas Electronics USB 3.0 Host Controller'.

  Through Googling, I noticed others have had problems with this host controller in Windows 8, and I can't seem to find a solution for it yet.

  Unfortunately, windows 8 compatibility is not listed then try to install the installer of renesas usb 3.0 in windows compatibility mode 7.

  complete list of supported products and the operating system:

  http://eSupport.Sony.com/us/p/SWU-matrix.pl?upd_id=6382

  Renesas Electronics USB 3.0 Host Controller®
  http://eSupport.Sony.com/us/Perl/SWU-download.pl?MDL=VPCL213FXB&upd_id=6382&os_group_id=6

  Download here: http://s02.download.sony.com/US/pc/RNDUSB-00241028-0042.EXE

  What does this do?

  This utility installs the originally shipped version of Renesas Electronics USB 3.0 Host Controller driver.

  This driver also solves the yellow exclamation point error that can appear in the device as "Universal Serial Bus (USB) Controller" Manager that indicates that the driver is not installed for this device.

  The products and operating systems (view all...)
  Model:
  VPCL213FX/B
  Operating system:
  Windows® 7 64-bit

  IMPORTANT: This file is only for use with the identified models. Not all models are sold in all countries.

  Important notes

  During the installation of this file, be sure that you logged in as an administrator or as a user with administrative rights. To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding. It is strongly recommended that you print these instructions for reference during the installation process.

  Download and Installation Instructions

  To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding. Download RNDUSB-00241028-0042. EXE a temporary of the file or download directory (Please note this directory for reference). Go to the directory where the file was downloaded, and then double-click RNDUSB-00241028-0042. EXE file to start the installation. The "User Account Control" screen, click 'yes '. On the screen "Select Country", select the country for the installation and then click on "next". To the "Renesas Electronics USB 3.0 Host Controller version 2.0.26.0" screen, click "next". The "License" dialog box, read the contract, then, if you agree, click "I agree" to continue the installation. The "Complete" screen, click on "Finish". Installation of the Renesas Electronics USB 3.0 host controller is complete.

• Where can I get AMD USB 3.0 Host Controller for windows 7 (32 bit) of

  Original title: ask questions about Windows 7 usb

  do someone know where do I go to download amd usb 3.0 for windows 7 32 bit host controller, because everything I downloaded it isn't on the Manager of catalyst for a lot of software on the catalyst instalation, host controller usb 3.0 in my google search.

  Thank you people

  Hello

  Thanks for posting your query in Microsoft Community.

  • What is the brand and model of the computer?

  You should be able to download AMD USB 3.0 Host Controller for Windows 7 (32 bit) of the support of the computer manufacturer Web site.

  For example: If you have Lenovo PC, you can check: AMD USB 3.0 hub and host driver controller for Windows 7 (32 bit, 64 bit)

  Similarly, you can type www.support. .com and search for the driver.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Satego P100-10F: Windows XP Lan, usb slots and the sound does not work

  Hello

  I have problems with windows vista, so I checked the forum to get information on the windows xp installation.

  I downloaded the drivers windows xp since the P100 Satellite (pspa6e), my only problem is that the LAN, usb slots and my sound does not work.

  I hope someone has a good idea for drivers or to install another driver I have sound and LAN on windows xp.

  Ty and Greetz

  See European driver of Toshiba.
  Here, you can try to install several drivers of different portable Satellite P100.
  Try all series.
  Fact is that some units of the Satellite P100 and Satego P100 series were delivered with the same features.
  Therefore, it should be possible to use the unique drivers of these series.
  Check all.

• How to use a USB microphone with voice dictation on MacBook Air?  Machine recognizes the USB device, but the microphone does not work.

  How to turn on a microphone USB bluetooth with voice dictation (Dragon for MAC) on the MacBook Air?  Machine recognizes the USB device, but the microphone does not work.   I don't see no response.   I use OS X 10.10.

  Version OS X?

• Running win XP pro sp2 mouse moves, but everything else does not

  Running win XP pro sp2 mouse moves, but everything else does not respond after a certain time. Just started doing this last month. Had Xp for several years without ANY problems at all.

  Hi BobM202,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3. do you have security software installed on the computer?

  4. are you referring to freezing except office mouse movement?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• After hybernation, all usb and wifi mobile devices does not work

  Original title: Hybernation question
  After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.

  Hi Mirza.Shanawazbaig,

  1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?

  2. do you have security software installed on the computer?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

  Method 2

  I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Peripheral USB has malfunctioned. Windows does not recognize it.

  Peripheral USB has malfunctioned. Windows does not recognize it.

  Hello

  ·        What is the exact error that you receive when you try to connect USB?

  ·        Since when are you facing this problem?

  ·        Which device you are trying to connect via USB?

  ·        This problem occurs only with a USB device or USB devices?

  Method 1:

  You can try to plug the USB key into a different USB port and check if you face the same problem.

  Method 2:

  Also I suggest to Uninstall USB controllersfrom Device Manager and check if it solves the problem. To do so follow the steps below:

  (a) click Start

  (b) the Device Manager type in the search bar and press ENTER

  (c) in device manager, go to the bottom and double click on Bus USB controllers, this will open a list of USB controllers to uninstall all controllers and restart the system this will reinstall all USB controllers again.

   

  Method 3:

  I also suggest to run the difficulty he provide in the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 4:

  You can also try to update the latest drivers for chipset on the motherboard manufacturer's website.

  WARNING:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also check out the link below:

  http://support.Microsoft.com/kb/555375

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.