USB in UN vsphere virtual machine

Similar Questions

• Access to the BlackBerry through the USB port on the virtual machine VMWare

  I have my development environment configuration in VMWare virtual machine, and I have no problems of deployment of BlackBerry applications on a simulator that runs as another virtual machine. The problem starts when I try deploying to the device via the USB port. The address is assigned when the mode of development on the device is not accessible from the VM, but only from my host, who do me any good, since as I said my IDE is in the virtual machine. A way to solve this problem? I can still deploy to the device via wi - fi (which is btw access via different ip - one given by the network) by this can sometimes be slow depending on the strength of the signal, etc, so I prefer to be able to deploy via the USB port.

  Just in case anyone has the same problem, how to activate must, VMWare Player click on the USB icon (to the right) and choose to disconnect from the host. Connecting the USB port at the prompt. Stupid...

• Receive error message when converting 5.1 VSphere virtual machine using VMWare Converter

  I am moving some Virtual Machines out of my server for VSphere, using VMWare Converter. When I select the source of success and the machine then I get a "failed to get hardware information for the selected computer". I tried two different machines. One is a Windows 7 and the other is a Windows Server 2003. The end of the game is to move them to a server with only VMWare Workstation.

  The research I've seen some users corrected it by changing the OS of the VM, but that did not help me. I have attached the diagnostic logs. Any help is appreciated.

  You must use the latest version of Converter 5.0.1 - 5.0 does not work

• Can I use an image created for VMPlayer on vSphere virtual machine?

  Our IT admin has a server running with vSphere, and I have a Virtual Machine in Windows 7 x 64 running on my PC that must be migrated to the job server. Is there a migration plan to a system of vSphere with a created VMPlayer image?

  Any help appreciated.

  PEI

  You are welcome.  If it helps, please don't forget to award points.  Nerds like me live for the points of the forum!

• Using a USB dongle on a virtual machine in a HA cluster

  I need to install software on a virtual machine in ESX 4.0 cluster, which requires a USB dongle to be fixed in order to run in non-evaluation mode. I just came across a product called AnywhereUSB which seems to be supported by VMware. Can anyone tell if they used this product, it's all good and I'm still going to be able to have this quick vMotioning of VMS, as is currently?

  > I'll still be able to have this quick vMotioning of VMS, as it is currently?

  Yes. You will be able to VMotion VM with USB over IP solution.

  ---

  MCSA, MCTS Hyper-V, VCP 3/4, VMware vExpert

  http://blog.vadmin.ru

• After copying a machine a host for another vspehere vsphere virtual machine I can not load the VM machine upwards. Can't open the Flash "hard" or one of the disks disk that this depends on

  Here is the error msg I get from vsphere client.

  Cannot open the Flash '/vmfs/volumes/52120f68-3f09e8f0-affd-f01fafcf18af/w2k3SE-base-20101005/Windows w2k3.vmdk' or one of the disks disk that it depends on.

  The system cannot find the specified file

  VMware ESX can not find the virtual disk '/vmfs/volumes/52120f68-3f09e8f0-affd-f01fafcf18af/w2k3SE-base-20101005/Windows w2k3.vmdk '. Check that the path is valid and try again.

  I have ssh client due to vmware ESX.

  ls # vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple

  564d73b4-7443-6b7f-9a70-cd355ad76d3b.vmem Windows XP Professional.vmx.0 Windows w2k3 - s004.vmdk Windows w2k3 - vmware - 16.log s009.vmdk

  Windows XP Professional - 24367b9b.hlog Windows XP Professional.vmxf Windows w2k3 - s005.vmdk Windows w2k3.vmdk vmware - 17.log

  Windows XP Professional.nvram Windows w2k3 - s001.vmdk Windows w2k3 - s006.vmdk hiding vmware - 18.log

  Windows XP Professional.vmsd Windows w2k3 - s002.vmdk Windows w2k3 - 14.log - vmware vmware - 19.log s007.vmdk

  Windows XP Professional.vmx Windows w2k3 - s003.vmdk Windows w2k3 - vmware - 15.log vmware.log s008.vmdk

  It seems that all the files are there. Except that there are some spaces.

  / vmfs/volumes/52120f68-3f09e8f0-AFFD-f01fafcf18af/Apple # cat "Windows w2k3.vmdk".

  # Disk DescriptorFile

  version = 1

  Encoding = "windows-1252".

  CID = 97c834c1

  parentCID = ffffffff

  isNativeSnapshot = 'no '.

  createType = "twoGbMaxExtentSparse.

  # Description of the measure

  RW 4192256 CLAIRSEMES "Windows w2k3 - s001.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s002.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s003.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s004.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s005.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s006.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s007.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s008.vmdk.

  RW 16384 SPARSE "Windows w2k3 - s009.vmdk.

  # The database disk

  #DDB

  ddb.virtualHWVersion = "7".

  DDB. UUID = "60 00 C2 91 86 bb a5 - 5 c bc 28 89 75 01 c9 b0 e1"

  DDB. Geometry.Cylinders = "16383.

  DDB. Geometry.Heads = "16".

  DDB. Geometry.sectors = "63".

  ddb.adapterType = 'ide '.

  ddb.toolsVersion = "8228.

  ddb.longContentID = "9d219dcc524591ac1095297d97c834c1".

  and here's a copy of the vmware.log file

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-STRING: "/ vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk ': cannot open (the system cannot find the specified file).

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s001.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s002.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s003.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s004.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s005.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s006.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s007.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s008.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s009.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-LIB: can't open ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk' with flags 0xa, the system cannot find the specified file (25).

  2014-08-14 T 19: 01:56.926Z | VMX | I120: Msg_Post: error

  2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disk.fileNotFound] VMware ESX can not find the virtual disk "/ vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk» Check that the path is valid and try again.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disklib.FILENOTFOUND] the system cannot find the specified file

  2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disk.noBackEnd] cannot open disk ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk' or one of the snapshot disks it depends on.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: ----------------------------------------

  2014-08-14 T 19: 01:56.939Z | VMX | I120: DISC: discs of opening had 24 ms.

  2014-08-14 T 19: 01:56.939Z | VMX | I120: Module DiskEarly market failed.

  2014-08-14 T 19: 01:56.939Z | VMX | I120: VMX_PowerOn: ModuleTable_PowerOn = 0

  2014-08-14 T 19: 01:56.942Z | VMX | I120: WORKER: asyncOps = 1 maxActiveOps = 1 maxPending = 0 maxCompleted = 0

  2014-08-14 T 19: 01:56.950Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Past vmx/execState/val of poweredOff

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 0 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3909]: error VIX_E_FAIL in VMAutomation_ReportPowerOpFinished(): unknown error

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Past vmx/execState/val of poweredOff

  2014-08-14 T 19: 01:56.952Z | VMX | I120: VMIOP: output

  2014-08-14 T 19: 01:56.956Z | VMX | I120: Vix: [12787513 mainDispatch.c:861]: VMAutomation_LateShutdown()

  2014-08-14 T 19: 01:56.956Z | VMX | I120: Vix: [12787513 mainDispatch.c:811]: VMAutomationCloseListenerSocket. Close the socket of the receiver.

  2014-08-14 T 19: 01:56.957Z | VMX | I120: VMX VMDB Flushing connections

  2014-08-14 T 19: 01:56.957Z | VMX | "I120: VmdbDbRemoveCnx: remove Cnx Db for ' / db/connection / #1 /"

  2014-08-14 T 19: 01:56.957Z | VMX | I120: VmdbCnxDisconnect: Disconnect: pipe closed for pub cnx ' / db/connection / #1 /' (0)

  2014-08-14 T 19: 01:56.961Z | VMX | I120: Exit VMX (0).

  2014-08-14 T 19: 01:56.961Z | VMX | I120: AIOMGR-S: o stat = 1 r = 3 w = 0 I = 0 br = 49152 bw = 0

  2014-08-14 T 19: 01:56.961Z | VMX | I120: OBJLIB-LIB: ObjLib cleaning done.

  2014-08-14 T 19: 01:56.961Z | VMX | W110: VMX has left the building: 0.

  Assuming that you have enough free disk space on the host ESXI 5.1 data store, I suggest you that you load the multiextent module as shown in the link, I posted and then clone the virtual disk using the vmkfstools command line utility.

  vmkfstools 'Windows w2k3.vmdk'-i 'clone.vmdk' slim-d - an ide

  vmkfstools EI 'Windows w2k3.vmdk' 'old.vmdk '.

  vmkfstools EI "clone.vmdk" "Windows w2k3.vmdk".

  The first line of the clones of the virtual disk in a virtual drive put in service end format, and the following two lines renaming virtual disks, so that you can delete the "old*.vmdk" files once the VM works as expected.

  Alternatively, you can also run the commands on the host ESXi 4.1 and then copy the new files hard again to avoid loading the multiextent module in the new host.

  André

• USB device to the virtual machine to auto-reconnect

  Hello

  I have two printers USB connected to my ESXi host, but when the esxi host restarts and usb devices are disabled are not reconnected when the USB turns.

  Is there a solution for this?

  With sincere friendships.

  Low van den Dikkenberg.

  Hello

  Welcome to the communities.

  Don't you installed vmware tools and followed below kb

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1648

• import the vSphere virtual machine

  I copied a 4.1 vSphere VM and tried to import it on the merger.

  No luck.

  Is this possible?
  How I go to this topic?

  (Is the fusion the Mac version of the workstation)?

  The VMs are directly transferable between vSphere and Fusion of note - you all first to export vsphere as an OVF and then import it into a Fusion-

• Devices 6210 USB in a virtual machine using

  Hello

  I have a NI 6210 usb device which I want to use in a virtual machine running in Sun's VirtualBox.

  The host operating system is Vista, the operating system in the virtual XP machine.

  It seems as if between the two OS USB device sharing does not work correctly.

  I installed the drivers fpr the 6210 in both the host and the guest operating system.

  The device is correctly detected in the host operating system.

  What I want to do is use the usb device in the virtual machine only, there no need to be available in the host operating system.

  But when I run the virtual machine, it seems as if the usb toggle device between the host and OS invited frequently, i.e. in a second, it appears in the host operating system, in the next second it appears in the guest OS. Is there a way to "turn off" the device usb in the OS, host so that it can be used exclusively by the guest operating system?

  I also tried to use Windows7 as the host operating system but with the same result as described above.

  Thank you.

  Christian

  Hi Christian,

  Can you tell me which version of the DAQmx driver you use? I am aware of a case where he helps update version 8.9 the DAQmx. If you have an older version, please upgrade. I hope that you have added a filter to the VirtuaBox mentioned such in support USB in VirtualBox help file section 3.7.9.

  Concerning

  TomBaum

• Get-VIEvent "vSphere HA restarted virtual machine.

  Hi score

  Can someone help me complete this script

  Get-Cluster 'test ' | Get - VM | Get-VIEvent | Where-Object {$_.} FullFormattedMessage-LIKE "{vSphere virtual machine rebooted HA *'} |" Select ObjectName,@{N="IP addr; E={($_. Guest.IpAddress)}}, Createduserid, FullFormattedMessage

  Out put:

  ObjectName IP addr Createduserid FullFormattedMessage

  ----------                          -------                             -----------                        --------------------

  VM1 05 - Sep - 14 16:14:29 vSphere restarted my virtual HA...

  VM2 05 - Sep - 14 16:14:25 vSphere restarted my virtual HA...

  VM3 05 - Sep - 14 16:14:25 vSphere restarted my virtual HA...

  Failed to get the IP address on this script.

  Thank you for giving if any good script to get vSphere HA restarted event when the host failure.

  Try like this

  Get-Cluster 'test ' | Get - VM |

  Get-VIEvent |

  where {$_.} FullFormattedMessage-match 'vSphere virtual machine rebooted HA'} |

  Select ObjectName,@{N="IP addr; E = {(Get-vue-Id $_.)} {{Vm.Vm). Guest.IpAddress}}, Createduserid, FullFormattedMessage

  Not sure property you are trying to achieve with ObjectName.

• How to make a visible USB hard disk for a virtual machine on ESXI 4.1?

  Hi all

  As I am new to the world of vmware ESXI, I always make mistakes or I don't undertand all therefore be complete :-).

  So I have a HP Proliant ML 350 G6 Server installed with ESXI 4.1 and I want to connect a USB hard disk to a virtual machine (SBS 2K 8). Currently, the virtual machine is not able to see the hard drive.

  I already add a USB controller to the virtual machine, but my USB HARD drive is still not visible to my virtual machine.

  Can you help on that?

  Thank you

  Michael

  Next, add a USB device to the virtual computer (in the change settings tab), there are different things, USB controller and USB devices. Sometimes, you may have to restart the virtual machine.

  Greetings

• VI 3 virtual machine SCSI disk is changed on the IDE drive in vsphere 4

  Hi Experts,

  When the virtual machine SCSI disk is add to the Vsphere virtual machine, only the scsci disk 3 VI is replaced by the mode IDE drive can be added.

  How to solve it? Thank you.

  Add a SCSI controller on the virtual machine and then add the disk

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  -Josh

  Trying to learn

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• Cannot RDP into virtual machine after the reboot

  Hi all

  I use VMware ESXi4.0

  I'm having a problem where if I reboot a virtual machine, once it restarts I try to use the Remote Desktop Connection Manager to access and receive this error:

  "The connection cannot be completed because the remote computer that has been reached is not the one that you specified.  This could be caused by an outdated entry in the DNS cache.  Try using the IP address of the computer instead of the name. »

  The current machine I noticed the error is Windows 7 but also for me Server 2008.  not sure if this relevant.  I can still access the machine through vSphere, but not Remote Desktop.  When I ping the name of the machine as well as IP address, they both similar deadlines.

  I checked my DC for dns entries, and they are there for this computer as well as in the reverse lookup zones.  I tried to do a/flushdns and / registerdns on the virtual machine.

  I would usually have for this problem to connect to vSphere virtual machine, then RDCM is there to connect.

  I saw another post on this topic in the forum, but he had a solution. This post is here > http://communities.vmware.com/message/1304004

  I tried the recommendations here and they did not help.

  Any ideas on what I can try?

  Thanks in advance,

  John

  Here's the update to which I was referring... He had to be reissued in June because of the problems that it caused on some systems.

  http://support.Microsoft.com/kb/2667402

  But, if you are able to connect via IP, then the RDP patch will probably not help.

• upgrade from version 4 to version 7 virtual machine

  Hi all

  Thanks for the support you provide

  I plan to upgrade my VMs running in version 4 to version 7. Is there a step by step procedure that must fallow? Please let me know if any body has any difficulty in it. I need to know about the upgrade NIC & SCSI adapter in virtual machines in particular. Please see the light on my notebooks.

  Concerning

  tdsk.

  Scott lowe also made a great step by step how to upgrade your virtual machines to version 7 and make the most of the new features with HW version 7 here: http://blog.scottlowe.org/2009/06/01/vsphere-virtual-machine-upgrade-process/