USB port may stop working after you remove or insert a USB device

Similar Questions

• Keyboard stops working after you press caps lock.

  On a compaq laptop presario CQ60-300SO the keyboard stops working after you press the caps lock button. The keyboard does not work once the computer starts, but after going in under the keyboard properties control panel and press the 'OK' button, this will work. Buy keyboard works when the computer RECORDS, so I can't get to BIOS. The keyboard work until windows starts and I activate it via the properties of the keyboard by opening the window and press OK immediately. I tried updating the driver but I only find that the keyboard already has the most recent drivers. I tried to restore the drivers and that does not work either. I also disabled start all programs and services to see if it was a problem caused by a program or service and still no luck. It's a very strange problem. I noticed that the keyboard IRQ ranges are both 64-64 and 60-60, which i thought was weird but that's maybe normal. Any advice will be appreciated.

  Hello

  You did changes to the computer before the show?

  Try the suggestions in the link and check if it helps:

  Troubleshoot keyboard

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-keyboard-problems

  You can also post your query on Compaq support forum:

  http://h30434.www3.HP.com/

• Word stop working after you install Microsoft updates

  I use MS Office Professional 2007 and Windows Vista.  Some updates have been pushed to my PC yesterday morning and restarted my computer.  Since then, Word has stop working.  I have not seen any problem with Excel or Access, the right word.

  SYMPTOM: I opened an existing Word document, and the lower part shows the number of words = 0, and my document does not in fact. When I close Word, I get a message saying that Word has stopped working.  Details of the accident are the following:
  Signature of the problem:
  Problem event name: APPCRASH
  Application name: WINWORD. EXE
  Application version: 12.0.4518.1014
  Application timestamp: 45428028
  Default name of the Module: mso.dll
  Fault Module Version: 12.0.6425.1000
  Fault Module Timestamp: 49 65443
  Exception code: c0000005
  Exception offset: 0003bf32
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  LCID: 1033
  Brand: Office12Crash
  skulcid: 1033

  WHAT I TRIED:
  1. I tried to launch the MS Office diagnostics, but the problem remains.
  2. I supported at each update from Microsoft that was pushed to my machine from 13/08/2009.  Still no luck.  Some updates I couldn't get out (received a message that the source was not reliable, even if it says Microsoft Corporation).  All of these updates 'not reliable' were related to one of the Office products, not Windows Vista operating system.
  3. uninstalled & reinstalled MS Office Professional 2007

  Hello

  Here's what can get out you of this problem.

  Try to run the word in Safe Mode & see if this is useful:

  Start--> Run--> winword/s

  Check, if still the Word crashes. Try to repair Office 2007:

  How to repair problems in the installed 2007 Office programs and features

  You can use one of the following methods to detect and repair problems that are associated with installed Microsoft Office programs and features, such as the registry settings and the installation files missing. You cannot use these methods to repair personal files, such as worksheets or of models.

  Method 1: Run Office Diagnostics from a 2007 Office program

  1. Start the Office Diagnostics tool. To do this, use one of the following methods:

  ·         For Office 2007 with a program menu, click Office Diagnostics in the menu help.

  ·         For Office 2007 with a Ribbon of program, follow these steps:

  1. click the Microsoft Office button, and then click Program Options.

  Note In this option, the program represents the name of the program.

  2. in the Navigation pane, click resources.

  3. click on diagnose.

  1. Click continue.
  2. Click Start the Diagnostics.

     If the Office Diagnostics tool identifies a problem, it tries to solve the problem.

  3. Once the tool Office Diagnostics complete, click close.

  Method 2: Run the tool detect and repair from Add / Remove programs

  1. Click Startand then click Control Panel.
  2. Double-click Add or remove programs.
  3. Click Microsoft Office 2007 Edition, and then click Edit.

     Note In this option, edition represents the edition of Microsoft Office is installed on the computer.

  4. Click repair, and then click continue.

  Hope this information is useful.

  Kind regards

  Savan - Microsoft technical support.

• HDMI port does not work after you refresh the computer.

  Updated my computer and now my HDMI port does not work. I can not connect my labtop to TV.

  Are you sure that the additional monitor is turned on.  Try holding down the and then press P until it is selected to extend the screens.

  If this does not work, go to your computer manufacturer's website and download and install the latest version of your graphics drivers.

• Printer stopped working after I removed a paper jam - Deskjet 6988

  I removed a paper jam today, according to the instructions. But since I did it, it will not be printed. The power light is, as if it's OK, but he absolutely refuses to print.

  My printer is a HP Deskjet 6988 and I am on Windows 7, 64 bit.

  Whenever I try to print, the print queue displays the print job for about a second, then he faints. I try to print again, it disappears. Then, if I do it a third time, it appears in the list and stays there, but the printer does nothing.

  After two minutes the queue no longer mentions it as the "impression". Instead, it says, "error printing". I try to delete the print job, but it just sits there, saying "error printing". It will not erase. The only way to remove it is by the printer stop or restart the computer.

  If I try to print after that stuff all over again.

  I tried closing the printer and reboot, restart the computer, power cycling (stopping the printer, unplug the cables, waiting..., plug again and restart).  I ran the Diagnostic Utility and it tells me that it works very well - well, very good for a very large paperweight.  I used troubleshooting via the Control Panel, and he said: "a print job in the print queue prevents other printing of print." But as I have already said, delete the print job does not solve the problem.  I am stuck in a loop of the removal of print jobs and nothing works.

  Help, please!

  Hey Tigger,

  It may have been stuck in the diagnostic mode - not able to move forward or backward for a time very long.

  Next time, if this never happens again, you can try a Reset of the printer:

  Here are two types of reset the base printer:

  (1) if there is a keyboard, turn it off, then on and press on # and 6 (press and hold while turning on the printer).

  (2) without a keyboard?  So unplug that LEAVE unplugged for 30 seconds to a minute.  Reconnect it.  (Be careful with this one - will not shock).

  It can become a little more complicated than that, but a basic reset sometimes "will have the printer attention" if it's just "spinning" and nothing else will not physically.

  I'm glad it works again.

  Maybe printers receive loners.   The smile.

• My file associations do not work after you remove a virus.

  My laptop has been the antivirus pro 2010 Vista virus and after its withdrawal completely my file associations do not work. Whenever I click on something, he opens the window "open with." It only happens in my user account and not my administrator account. Even when I try to open the system restore, it appears with the same window "open with." Is there a quick fix for file associations works again?

  Hello

  Even if your removed some malware a very intense and thorough check is prudent. How
  to restore the .exe questions in the next message.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• based on the redirection port has stopped working after the upgrade of Capitan 10.11.3

  I have a web service running on a VM (virtualbox VM), which I can access on my mac via 192.168.99.100:8000. The mac itself is tuned to 192.168.1.2. To port 8000, I set up a redirect on the server (Server version 5.0.15 OSX) Web sites pointing to 192.168.99.100:8000. It works, as long as the conscripts of the Mac (even when called from another virtual machine on this mac).

  However, redirection fails when you try to access from other computers within the 192.168.x.y space, or when it is called from the internet.

  ... I add a few comments on what has been checked so far:

  -port 8000 is open to the router

  -OSX El Capitan (10.11.3) firewall application is disabled in system preferences

  -OSX Firewall adaptive server is disabled (using sudo /Applications/Server.app/Contents/ServerRoot/usr/libexec/afctl - X)

  -by checking port 8000 canyouseeme.org it is recognized as open

  ... still, the request never machine made...

• Click of the mouse stops working after you start the first application

  Hard to explain this problem.  First time I click on what either in an application after computer startup (Word, Excel, etc.) the arrow of the mouse moves, but the click does not, anywhere, not on the desktop, taskbar anywhere.  Accentuates not delayed anything either.  But when I press ctrl-alt-delete, move the arrow down to start the Task Manager and click here, then click Start to work and things get even once highlighted and everything seems normal.  HP Pavilion dv9000t Vista Home Premium 32-bit Intel Core 2 duo, 2 GHz, 2GBDDR, this is going on for about 6 months now.  I just noticed, I installed a trackball logitek, and after installation, it does the same thing.

  Hello

  ·         What is the brand and model of the computer or the mouse?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to run the Microsoft fixit from link and check mentioned below.

   

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   

  Method 2: I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the results.

• Satellite L300-11V - Internet does not work after you remove software

  Hello

  Internet my brother no longer works. We believe that it is because he took off a bunch of software/programs to free up space.

  He said that the problem is
  ... "There are problems of hardware or driver with the network card"Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS 6.0)"on this computer".

  Can someone please tell me how to solve this problem, or what to download?

  The laptop is a Toshiba Satellite L300D-11V

  Thank you

  Hey Buddy

  This error message is that you need to reinstall the driver for the network card. You can get this driver on Toshiba page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If you have installed the latest version of what the Internet should work again! :)

• Outlook stop working after you download Service Pack 2 for vista

  Auto Update for vista sp2 and now cannot open office outlook 2007.  Put just a message saying it cannot open Outlook.

  Hello Jon,

  Thank you for choosing Microsoft answers forums for Windows Vista.

  Please let us know the exact error code. It can be found in the windowsupdate.log file. Just click on start and in the search type windowsupdate.log box. Scroll down to the bottom of the window to check the error code.

  Apart from that, you can try the following:

  Step 1:
  
  Try to restore your computer to a time where it was working fine.

  It uses system restore to return your system files and settings to an earlier point in time, without affecting personal files, the restore points.

  For more information such as how to perform a system restore, you can follow the link below:

  http://windowshelp.Microsoft.com/Windows/en-us/help/517d3b8e-3379-46C1-B479-05b30d6fb3f01033.mspx#EI

  Step 2:
  
  Disable any security software or firewall. (Note: once the problem is resolved, you can activate it back)

  Step 3:

  Install the stand-alone package for Windows Vista service pack 2.

  Visit the link below to download the SP2:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  For your reference:

  How to obtain the latest Windows Vista service pack:

  http://support.Microsoft.com/kb/935791

  Kind regards

  Savan - Microsoft technical support.

• Laptop does not work after you remove the virus win32/winfixer

  Original title: win32/winfixer

  I had cleaned up my n cell phone it's a bad virus win32/winfixer and now my laptop does not work because I deleted it and also my big computer will not work right there problem downloading it says it needs to microsoft.net1.1sp1 ep, but it does not load become crazy pls help me...

  Hello

  1. what exactly happens when you start on the desktop?

  2. you get any error message?

  3. is your laptop work fine in safe mode?

  4. What are you trying to download?

  5. How are you trying to download?

  6. What is the full error message do you get?

  7. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  Method 1: How to fix a computer that does not start.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041

  Hope this information is useful.

• My built-in webcam on my laptop of HP 2000 does not work after you remove Cyberlink YouCam.

  * Original title: Cyberlink YouCam

  Hello. I tried everything to get my built in webcam on my HP 2000 Notebook PC for work, but I don't know what to do now. I accidentally uninstalled my Cyberlink YouCam while he was trying to do. Do I need installed to be able to work properly? Thank you. -Schmidt T.

  Hi Schmidt,

  You must install the Cyberlink YouCam software in order to use the built-in webcam to the laptop of HP 2000. I'll get you the link and install the software.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-109796-1&CC=US&DLC=en&LC=en&os=4132&Product=5158888&sw_lang=

  If the problem persists, you can download the Cyberlink software and see if that fixes the problem.

  http://www.CyberLink.com/products/YouCam/features_en_US.html?&r=1

  Keep us informed on the status of the issue.

• I'm aware of licensing for Adobe Photoshop and InDesign CS3 has stopped working, after you follow the instructions to uninstall and reinstall, I find now I'm unable to use an application like component installation failed. What should I do now?

  See link below and try steps mentioned:

  https://helpx.Adobe.com/x-productkb/global/error-licensing-stopped-Mac-OS.html

  Let us know if you need more assistance.

  If you get the same error again, if possible post a screenshot.

• USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  Hi ahmedman_10,

  ·         You follow the steps in the article of my previous answer?

  Follow these steps in my previous answer and at the same time this article, follow these methods.

  Method 1: Follow the steps in the article.

  USB port may stop working after you remove or insert a USB device

  Method 2: Update the latest drivers for chipset.

  How to manage devices in Windows XP

  For reference:

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

• My CD/DVGW device stop working after iTunes was installed with Apple records.

  My CD/DVGW stop working after you install the program iTunes with Apple records. The letter (e) are attributed to him does not appear in computer (Windows Vista Home Premium), as it was before. Every time the PC is switched on or reboot, a message from Apple saying "AppleSyncNotifier.exe point of entry is not found. The procedure entry point sqlite3_prepare_v2 could not be found in the dynamic library SQLite3.dll. "The HP device proves that this CDROM works. iTunes has been removed, but the apple files are still there. Driver Detective advised to remove the filters from the registry. Only the filters 'less' appeared and has been deleted. This does not solve the problem. Should I delete all Apple records that have been installed with iTunes? This will damage other programs?  Reinstall the driver for this device does not resolve the problem.  !  yellow sign keeps appearing in the parity for this device handler. Systen restore does not a remote date just to put it as he was back. Can someone help, please?

  Hello

  Having too many competing programs from loading at startup CD/DVD can cause these problems.

  Deleted? Or did you correctly uninstall iTunes? Check with iTunes support for complete hair removal methods.

  ---------------------------------------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">