Power supply Mini 210

Similar Questions

• Compaq Mini 110: Polarity of power supply jack

  Hello

  I have a HP/Compaq Mini 110 that was given to me because both the battery and the AC adapter was lost. I have a power supply of the correct voltage (19 VDC) and can get an outlet of the right size. I need to know what the polarity of the plug must be, for example, is the center of the end positive or negative? I also need to know if the computer will be also powered if one battery (even dead) is not installed. If it will power-up with the polarity a/c adapter, I'm going to buy a battery, otherwise I don't lose money. Shame on HP/Compaq to not show a pictorial of polarity on the camera body. If I can get going, have enough moxie upgrade to Windows 10? Thank you.

  Here is the Service Manual:

  Manual

  See p. 54 on the hard drive. She straight plug the motherboard, but it shows a cart or make sledding which does not move there and the SSD is welded to a SATA connector. For some time I took one of these apart.

  He's a regular SATA and the size limit, it's what is on the market, not the hardware, so you could theoretically install a 2 TB or a 2.5 inch SATA SSD. You could probably get one inch 80 gig SATA SSD 2.5 for a pittance and it would run as well as he is capable of running.

  The memory you have is DDR2-800, but the system he clocks up to speed DDR2-533.

  The power Jack is soldered to the motherboard and there is no way I know to stretch upward. A lot of youtube videos on the welding on a new jack and you can find the plug for a few dollars. It is not a work that I do, but I saw several times and I think you can probably manage it if you have the soldering equipment.

  If this has answered your questions please make it easier for others to find by marking "accept as a Solution.

• Power on password for HP Mini 210-1010NR

  I just bought a used HP Mini 210-1010NR on e - bay.  When I turn on the monitor, she prays for power on password or administrator password.  How do past this to use the computer?

  Hello

  Enter: 60780900

  Kind regards

  DP - K

• HP Mini 210-2145DX: lost administrator or power on password

  I lost my administrator or power on password to a laptop running Windows 7, don't know if it's a 32 or 64-bit, a HP Mini 210-2145DX.

  Immediately after turning on, it asks, then said, disabled system [50988573].  It is before the Windows splash screen.

  Any help would be MUCH appreciated.

  Thank you!

  KE

  That made me initially, but is it possible to get the password to connect to the home screen?  Thank you!

• Mini 210-1076NR: Mini 210-1076NR lost power on password

  I have a Mini 210-1076NR and we have long forgotten the Bios password.

  I am being welcomed with a enter the administrator password or power on password. I tried every password I can think and it keeps failing.

  After the 3rd attempt failed, I get this code - 64223998

  Any help is greatly appreciated.

  @briandunaway

  Enter 71181318

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• HP Envy Pheonix 810-210: Possible POWER supply problem?

  I bought the HP Envy 810-210 a Phoenix earlier this year and recently replaced a 645 GTX graphic card a GTX 960. When I replaced it I noticed the power cord was appropriate is more good in the power supply and can fluctuate a little. Now when I move my PC, the power cord will be disconnected and will Crackle. This turns off my computer and I have to tinker with a correct position in the socket to restart.

  What would be the recommended action for this? Is this a problem of cord or plug, do you? Y at - it a power supply that matches or is better than that which is currently in my computer (here), which will be a fit if it needs to be replaced?

  Hello

  The CX600 Corsair or CS650m would be an excellent choice for a power supply.

• Power supply replacement for Acer Aspire x 1800 desktop mini

  I need help to identify what supplies I can get to replace the rather noisy in there.

  Also, if anyone knows about the actual model and details of one that comes with (pines, watts, efficiency) that would be appreciated.

  Once I bought a replacement and it didn't fit because of the very compact housing.

  Thanks in advance.

  Well, in regards to the power, I think that a 220 watt power supply will do. Regarding the size, if you live in America, I take to Tiger Direct and let them help you. They are very friendly and intelligent. Help most basic is free. It wouldn't hurt.

  They carry several alternative energy supplies. They wear very probably one you need.

  After checking, it looks like the power you need.

  http://www.eBay.com/ITM/new-genuine-Acer-Aspire-X1700-X1800-X1900-X1920-X3100-X3200-power-supply-220...

  Here is the link where I got most of the info:

  http://www.CNET.com/products/Acer-Aspire-x1800-u9002-core-2-Quad-Q8300-2-5-GHz-4-GB-750-GB/specs/

  Most of the supplies are about the same size. But I can't say its size for a mini.

  But again, you could call Acer for most of the information you need.

  CoolJoe

• Border in black screen HP Mini 210, screen shifted downwards - problem after power outage

  HP Mini 210-1000 actually it's HP Mini 210-1060 EV PC

  Some specifications:

  Display: 25.6 cm (10.1 ") diagonal WSVGA LED HP BrightView Infinity Widescreen Display (1024 x 600) SUBMISSION

  Battery has been dead for a long time.

  My display drivers and BIOS have been recently updated from the HP website.

  After a power failure and a reboot, the screen looks weird. It was moved about an inch down with a black border at the top, on which the mouse won't and the task bar is not visible, as is the bottom of the screen.

  When I go to the screen resolution in Windows by right-clicking on the desktop resolution is set at 1024 x 768, when I click on advanced settings, the monitor tab, monitor is set as a Monitor (1024 x 768 60 Hz) generic Non-PnP.

  When I change to 1024 x 600 it seems blurred and stretched vertically, but the screen is always shifted down with black border on top.

  When I get the Intel graphics settings I can make the same changes as in the dialog Windows (640 x 480, 800 x 600, 1024 x 600, 1024 x 768).

  In image format Options when I select full-screen (non-frontiere) the black border is fixed but always tense vertical screen but the screen is cut down with no visible taskbar.

  Graphics driver reinstalled so that some Type Monitor of windows drivers, nothing changes.

  When I turn on the laptop, the screen HP Quickweb appears also as a 1024 x 600 stretched vertically without black border at the top but will disable the display down.

  It seems that Windows and Hp Quickweb see at 1024 x 768 60 Hz display after the power failure.

  Before that, I had installed Windows updates, but nothing on the display drivers.

  I only got a point system restore leave on earlier that day (very low disk space?) but that did nothing.

  Guess it is a registry/driver issue since no pixel is bad and the black border on top is set in image format Options when I select full-screen (sans-bordure). Any suggestions please?

  Of the information system

  Model: HP Mini 210-1000 actually it's HP Mini 210-1060 EV PC
  Name of the operating system: Microsoft Windows 7 Starter 32-bit
  Version: 6.1.7601 Service Pack 1 Build 7601
  The version of the BIOS/Date: Hewlett-Packard F.24, 18/03/2011

  Display:
  Name: Intel(r) Graphics Media Accelerator 3150
  PNP device ID: PCI VEN_8086 & DEV_A011 & SUBSYS_3660103C & REV_00\3 & 21436425 & 0 & 10
  Adapter type: Intel(r) Graphics Media Accelerator 3150, compatible Intel Corporation

  Name: Intel(r) Graphics Media Accelerator 3150
  ID device PNP PCI VEN_8086 & DEV_A012 & SUBSYS_3660103C & REV_00\3 & 21436425 & 0 & 11
  Compatible adapter Type not available, Intel Corporation

  SOLVED.

  After noticing the OS startup screen/HP resolution looked normal, I just removed the plastic bottom and hit the CMOS battery, after reading this somewhere, because the audio drivers and webcam have been uninstalled too whenever I rebooted the netbook.

  He has not moved even because it was recorded well.

  So I restarted and the resolution has been set.

  Now, can't make the webcam work even though I reinstalled the driver...

• HP Mini 210-1020: enter the password administrator or power on password

  HP Mini 210-1020eo

  Gets a prompt: "power on password or administrator password.

  I don't know

  Disable System [13140607]

  P/N: vx796ea #uuw

  S/N: CNF017337C

  @FrankDK

  Enter: 02828229

  Kind regards

  DP - K

• Need help to administer password or power on password for computer hp mini 210

  Need help to administer password or power on password for computer hp mini 210 - code poster 85964037

  Try Kar.

  30642019

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  IF demand for CURRENT password using this code.

  REQUEST NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Dell Vostro 220 Mini-Tower power supply

  The Dell Vostro 220 Mini-Tower supports a power more than the factory installed psu and if so how much power does support? I read here and there that it supports 300 to 350 watts... no one knows with certainty? ... Thank you.

  Lonetrapper

  The Dell Vostro 220 Mini-Tower supports a power more than the factory installed psu and if so how much power does support? I read here and there that it supports only 300 to 350 watts... nobody knows with certainty? ... Thank you.

  Lonetrapper

  This is false, as a greater power supply and can be installed.

  Generic standard ATX power supplies, with a 24-pin or 20 + power connector 4 - pin main motherboard, with or without the on/off switch, would be compatible with the Vostro 220 Mini-Tower.

  You should be able to buy a compatible power supply either a local computer or online store.

  Need a power supply with four SATA power connectors.

  Bev.

• HP mini 210-2145dx: power of Hp mini 210-2145dx on password

  I bought it for my daughter and she herself seems to have locked some how .can someone help?

  I have a

  HP mini 210-2145dx...

  How can I recover the pass or get into the computer

  and a system to disable the code from 78422838

  Thanks in advance

  Hello

  Enter: 67580218

  Kind regards

  DP - K

• Request for block of power SUPPLY Dell optiplex 7040 Mini-Tower

  I intend to buy optiplex 7040 MT at end of game. So I would like to know:

  1. the motherboard has the processor power connectors and standard motherboard or owners?

  2. is it possible to replace the stock power supply with a cooler master extreme power 600W more? If not, what more than size of power supply fits there?

  3. is it possible to mount a gtx 1080 in there?

  Hi iamprateekprakash,

  We do not recommend that it works because it has not been tested but according to your discretion, you can try, but as you rightly noted that it might void the warranty with Dell.

• Update on power supply for Dell Optiplex Mini Tower 3020

  Can you suggest me a power supply that compatible with my Dell pc? The default POWER supply has only 290W. I want a power supply about 500-550W and compatible motherboard Optiplex 3020 and fit the case.

  The power supply in the TOWER can be updated with an adapter.

  Dell OptiPlex 3020 main PSU to power 24 pin cable adapter 8 pin (30cm)

  Suitable for Dell OptiPlex 3020 / 7020 / 9020 / T1700

  http://www.moddiy.com/products/Dell-OptiPlex-3020-PSU-main-power-24%252dPin-to-8%252dPin-adapter-cable-%2830cm%29.html

• HP Mini 210-3025 feeding issues its

  Hi all

  This is my first post here, so please forgive me if I'm posting in the wrong section/Council.

  I have a HP Mini 210-3025 AA as a Christmas gift last year of my better half, that I loved and appreciated and never encountered problems with this day (Finally, nothing that I've failed to solve anyway).

  So it's almost a year now and I use it, 2 weeks ago my better half and I went to a holiday and the laptop worked perfectly before that night, and since we were leaving for 2 weeks, I removed the battery (I usually use the laptop without the battery installed in any case, just plug it into the charger) But anyway, removed battery, external mouse and removed flash drives and put in his case.

  This morning after I got home, I tried to turn it on, connected outside the mouse, charger and pressed the power button, but no response... So I unplugged the charger (both supply and the laptop) and reconnected, still nothing; then decided to give the battery a go, which lead to the power led next to the plug of the charger flashes 3 times indicator of low battery. So I plugged in the charger, the red light and should be in charge, but the Start button / stop it turns not again, waited 20 minutes to try again, still nothing, tried with another charger, still nothing!

  Finally I let the battery charge and it was fully charged, but now he is dead yet and I can't turn it at all! Although the battery is charged!

  For a person that most people consider a "geek", I have no idea of what the exact problem is, initially I thought that it could be the power button, but when the power led blinked by pressing it stack installed earlier I ecxluded; thought it could be the charging circuit for not working after 20 minutes, but now it is fully charged, still does not!

  I tried the hard reset, but it doesn't seem to change anything

  I am a very careful person with my stuff, so nothing has been spilled on my laptop, or something like that, but now I have a major problem happening for obvious reasons! And it's a gift from my better half which means I want to return to work just because this isn't just a laptop to me!

  Any ideas/suggestions are appreciated.

  I was not sure from your post if you had been able to reset or not.  However, thank you to try my steps even if you tried this solution in the past.
  
  It is difficult to identify these kinds of questions.  However, I think that your motherboard may be at fault here.  I'll try to explain why.  Battery (seem to) load normally so we can assume that the AC adapter and the battery are in working condition.  However, even with a charged battery, you get no response from the laptop.  With other kinds of issues (bad BIOS, bad RAM, etc.), you will get a SHIFT CAPSLOCK or Numlock blinking code which indicates the problem.  If it was one of those pieces of equipment that has been loaded you would receive a different set of symptoms.  Unfortunately, I can't speculate on the cause of the failure.
  
  I think your best bet is to have the laptop repaired.  You said that you have already started the process to have the laptop repaired through HP.  It is the best option in my opinion.  Just in case where you do not have information you can directly join the HP Support at 1-800-474-6836 for the United States / Canada.  Other areas will have to visit HP's Support around the world to find their contact information.
  
  If you have any other questions, feel free to ask.  Enjoy the rest of your week