USB Port problems

Similar Questions

• Bluetooth Windows 7 USB port problem

  Hello

  I use a bluetooth class 1 dongle (manufacturer unknown) with the V 8.00.03 Premium toshiba bluetooth stack and a bluetooth headset. The specifications for the dongle are: Bluetooth V1.2, compatible USB V1.2/2.0

  I have a strange problem when changing the USB dongle is plugged. If I change the dongle on another USB port, searching for devices fails. I tried to uninstall the battery and of course remove device from the bluetooth Manager window.

  Also, strangely, when I plug the dongle on a USB extension on the same port, it does not either. When I put the dongle into the same USB port it works fine as usual.

  I want to change the USB port so that I can get the best reception, like its plugged in to the back at the moment. Also, I want to use the usb expansion for the same reason, to bring out above the office. Oddly, if, as I say, it does not work with the extension (just a regular cable with USB male on one end and female on the other to plug the dongle in.)

  Is this something to do with voltage drop down a cable? And regarding the change of the ports usb is it something to do with ports being installed on this USB port bluetooth only? I don't know exactly how ports bluetooth works, how they settle etc.

  Thanks much for any help.

  Hello

  > Also, strangely, when I plug the dongle on a USB extension on the same port, it does not either. When I put the dongle into the same USB port it works fine as usual.

  I think you're wrong here buddy
  If you use another manufacturer's computer, and if you have problems using it, you should check the page of computer manufacturing support.

  In my opinion the question isn t linked to Toshiba BT stack but to the USB ports on your computer.

• On Satellite Pro A300-13Y USB port problem

  I have a Satellite Pro A300-13Y with 4 USB ports. The USB ports of two right don t work. I bought this phone recently (2-3 weeks ago). It has a Windows Vista Business SP1 on it. I put chip in utility installed on it, I checked the Device Manager and tried to find driver for it but I couldn't solve this problem.

  So I called Toshiba service dek, they say that I need to install new standard to factory install to see if it can be solved. But I don t find it the best way and I have some applications installed on it and get some info on my laptop, so I would find another way to solve this problem.

  Also, I think it might be a hardware problem. Can someone show the way in which I can find or fix this? I can also send it to guarantee, but I made a mistake and if there is not a hardware problem that I have to pay for it.

  Hello

  I know it s not the best way, but it's the only way to exclude a hardware failure. If after a recovery of the won´t of USB ports not work then you can send it to repair without being in doubt that they will charge you for the repair.

  Welcome them

• W510 usb ports problem

  Hi all

  I have a W510 machine which has 4 usb ports, including 2 3.0 ones (blue marker), 1 still active (marked in yellow) and usb-eSata port a combo. They are all works well with data transfer, but I'm not sure that they do with the power supply matter. The use of two 3.0 ports seem to feed all the time, except when the laptop is turned off (say, my short of cooler for laptop when the thinkpad goes into mode 'sleep'; or I can easily wake up my pc by moving my mouse that is connected to one of the two ports 3.0)

  The combined port seems very well, his power goes off mode "Eve" (cooler stops working when it is connected to it)

  Always on that seems odd. Power goes off like the combo, but if I plug it into a something like the receiver of my mouse wireless, the machine does not start in the next boot.

  Does anyone have problems like mine?

  Hello partner,

  Try to check in the BIOS if the always on udb is activated and in the boot order if usb is not first otherwise u may have problems to start with something to plug...

• USB port problem - peripheral usb not recognized for what I plug

  When any device is plugged into usb port (ipod, camera, printer, etc.). I get the message "usb device not recognize."

  All the usb drivers have been updated, but I still receive the message.

  Hello, just for your info. I ran the patch program, but it didn't really do anything but say I had a problem with something and I had to pay someone to watch. Someone I know told me that the last thing that I had loaded several days before the problem was probably the problem. The only thing that was new was Avast program, so I uninstalled. But this does not work, I still had the usb problem before and after I reinstalled it. Also, I discovered that I had a problem to interface with Avast and after repeatedly talking about them and trying hard and it doesn't work, they wanted me to use their special program program uninstall in safe mode and uninstall Avast. So I did, then I reinstalled it and it fixed the problem to interface with Avast. Then a few hours later, I tried to use my usb ports again, just for the * of it. And quess what, they worked. Yes in some way the avast program stopped my work usb ports, when I installed it first. Avast said he couldn't have their summer program? Well it works now anyway. Thank you, Greg

• Tecra M11-134 - Windows 7 USB ports problems

  I have three USB ports, that which is a SATA port.

  SATA port stopped working earlier, but I reinstalled it, after what it worked again.

  One of the USB ports however stopped working earlier, and am now unsure as to if this particular port doesn't show even in Device Manager (I see two entries "Generic USB Hubs", two "USB host controllers", a "USB unit (composed)" and two "USB root hubs"), but who is refers to the regular USB ports and that the SATA port?

  One of these entries in the USB port which does not or does not show this port?

  In any case, I can't get one of the ports to work even after reinstalling all USB ports.
  Can anyone help?

  I hope that someone with the same machine will describe the own experience with this, but what I want to know is follow:
  Have you tried to reinstall original Win7 32-bit professional and test functionality with the factory settings?
  >... even after reinstalling all USB ports
  Out of curiosity, but how you did it? Have you reinstalled the chipset driver?

• USB ports problem

  I have ENVY of HP dv4. There are 3 usb ports in it who works alone. Two ports do not work. Please tell me how can they work? Thank you

  Hi Mtalha,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP ENVY dv4-5211nr USB ports and the laptop does not. Here is a link to Troubleshooting connections USB.

  I hope this helps.

  Thank you.

• HP Envy x 360 (M1V68UA): USB Ports all failed - resembled HW failure, but resolved by reinstalling a driver

  This post is an explanation of the complete absence of the laptop (2.0 & 3.0) USB ports and the later hotfix.

  Suspecting a hardware failure, I ran the Diagnostics UEFI and received confirmation of a default by a character 27 failure code.  This type of information is supposed to be useful to someone, but I couldn't find any documentation on this failure on the Web code and technician HP customer care has never offered an explanation.  The ID of the failure, I received was:

  0GF87X-7NW88A-GXGJMF-8D3Q03

  I made arrangements to ship the laptop to HP repair, but while waiting to receive their shipping box, I continued to research.  I happened to run System Mechanic from iolo and noticed a tool "Toolbox |" Recover | Troubleshooting of the system"that took me as a result of convenience store window 10.  I ran the hardware and devices troubleshooter, and confirmed a problem with the USB ports.  But, surprisingly, the fix was to install the latest driver for the Intel USB 3.0 eXtensible host controller (USBXHCI. (SYS).

  Once the driver has been reinstalled, the USB port problem has been resolved.  He worked for 3 days and I was able to back up my laptop on an external hard drive into a USB port, as I usually do.

  So if you see a problem with your USB ports, which can resemble a hardware failure, it is better running of the utility window hardware & peripheral troubleshooting.  It can save you an unnecessary repair work.

  Best regards, Mike
  
  

  @mike_d177

  Welcome to the HP Forums
  
  I would like to take a moment and thank you for the use of this forum, it is a great place to find answers.
  You have the best experience on the HP forum, you can also visit our Guide of Forums from HP for the first time here? Learn how to post and much more.
  
  As I understand it you had conducted a test of material using the UEFI diagnostic tool and received a failure ID, however, you install the latest driver and solved the problem.
  
  I'm glad that worked for you, even if you keep the only common, the ID of the failure you captured represents a "Communication error" device on devices such as GPS, switch and/or USB, HUB, Modem, network card, network drive, PCI, PCMCIA card.

  Install the most recent driver is one of the first steps to solve the communication error, however, if the problem is intermittent because it sometimes a repair would be the best way to go.

  Click here to see details on the HP Service Center.

  If you are unable to reach a resolution, please click on accept the Solution to help others with similar issues.
  If you like my assistance, please click on the thumbs up icon.
  The two icons are below this post.
  
  Have a good day Ahead.

• USB ports not working not

  Hello

  I have followed several threads on this forum because it seems that my USB port problem is not new. I have a Pavilion G6. I get the same message everytime I try: "Windows cannot find the device drivers for your computer. The laptop came with Windows8, the technician could not get Windows 8 to recharge properly once the hard drive is dead and had to be replaced. I now have Windows 7 (which I actually prefer), but the pilots appear to be rare for a lot of this feature of machines using Windows 7. Any help anyone could offer would be greatly appreciated. This laptop has been a very disappointing purchase.

  Thank you

  Hello:

  You will need to download and install both of these drivers, as the hardware ID you posted indicates that your laptop has an AMD processor and chipset.

  These are the same drivers that I posted above.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229464&SP...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229464&SP...

• My USB to ethernet adapter works only if plugged into my MacBook Pro. I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports! Any suggestions?

  My USB to ethernet adapter works only if plugged into my MacBook Pro.

  I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!

  Any suggestions?

  Juice what 'expander' did you use?

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Tablet HP 8 G2 1411: Problems with my USB port on my Tablet

  Problems with my USB port on the Tablet connector. Fees sometimes and sometimes not.

  Hello and welcome to the HP support community!

  Micro USB ports tend to be quite fragile.  A good accidental yank on the cord that connected while can be enough to cause damage.

  If you want to organize repairs, contact HP directly.

  To contact HP directly, click on this link: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  Outside the U.S.: http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
  
  WyreNut

• Portege Z30-A-12N with Port Replicator Port Hi-Speed USB III problems

  Hi all

  I have a big problem with my new Portege Z30-A-12N and Hi-Speed Port Replicator III.

  I connected the power, DVI, LAN, mouse and keyboard to the Port Replicator.
  Power, DVI and LAN are okay, but none will be found if I connect something to the USB Ports 2.0 or 3.0.
  No mouse, no keyboard, and no USB key.

  When I start my Portege I must enter a password after you press the power button.
  These password, I could enter with the external keyboard, but in windows, no keyboard has been found.

  If I connect the keyboard and mouse to the USB Ports of the Portege instead of Port Replicator, the two has been found.

  I ran Windows 7 Enterprise on the Portege.
  BIOS version is 3.30

  Do you have a solution for me?

  Hello

  The HI-SPEED PORT REPLICATOR III PA5116E-1PRP supports 2 x USB 2.0 and 4 x USB 3.0 ports.
  You n t special need Win 7 drivers in order to be able to use the USB ports or other interfaces such as VGA, DVI, audio, etc.

  Sound problems, make sure that the audio device has been selected in the right panel-> sound-> playback tab

  By the way: Win 7 needs USB driver 3.0 which is preinstalled when the laptop was equipped with USB 3.0 ports. My knowledge if your mobile phone does not support USB 3.0, you will be able to use the port replicator USB 3.0 ports.

  Finally and above all devices must be connected before you start the computer. The decision supported and compatible specifications: Portégé R30 - A, Tecra Z40 - A, Tecra Z50 - A, Portégé Z30-A/Z30t-A, Tecra A50 - has

• problem against the USB port

  I have HP Pavilion 2301ax g6. but I'm tired of Windows 8...
  SO today, I install Windows 7 ultimate. ....
  I hv installed all necessary drivers...
  but... then also my USB PORT does not work... 1 port works, but is not another...
  but I m up to tgat sure there must hv sm software problem. .. .my port is good...
  When I plug the mouse, then the Red shot... but mouse doent work...
  
  Please, I beg you. Help me imeadetly. .....
  thnx... Please help me...
  and also provide me win7 ultimate my laptop drivers... HP Pavilion g6-2301ax
  Please...

  Hello:

  You must first install the graphics driver for the model I posted.

  Then, you need to install this software so that the webcam to work.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117932-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5275619 & sw_lang =

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• Problem with the USB ports, coast and Bluetooth in Satellite A100-237

  Hello, I own a laptop Satellite A100-237 and I have an annoying problem for quite a while now. The two USB ports in the side as well as the Bluetooth device will not work. What is the bluetooth device is it is simply not recognized by the system, as if it wasn't there (it is said the installation of the driver too) while any device I connect to USB ports side does not work either.
  The other two USB ports in the back work very well.

  Hello

  Maybe this two ports are really defective, and there is not much to say. You will get your laptop for repair, or you live with it and use the other two USB ports. Sorry, but I see your ad as a report short and not as some to ask for help.

  Bye and good luck!