USB stick lost its file system?

Similar Questions

• How to convert a RAW format NTFS USB key or other file system types?

  I have a 4 GB USB flash drive and the type of file system is RAW. When I insert my USB, it asks you to formatting and when I try to format it to get an error message, it says "windows could not complete format."  I used different utility tools to solve this problem, but none of them were useful. I need to format and use this flash bad memory. Any help will be greatly appreciated. Thank you

  I have a 4 GB USB flash drive and the type of file system is RAW. When I insert my USB, it asks you to formatting and when I try to format it to get an error message, it says "windows could not complete format."  I used different utility tools to solve this problem, but none of them were useful. I need to format and use this flash bad memory. Any help will be greatly appreciated. Thank you

  Access

  Control Panel\All Control Panel Items\Administrative Management\Disk management tools

  Locate the flash on the list disk. Partition and format.

  Tom Ferguson

• Connected USB not accessible when file system

  Hello

  We are developing an application for BB 4.6 and we meet a strange error when the BB is connected to the desktop via USB software.

  Our application downloads files from the internet and stores it in the "file:///store/home/user/app_dir/". We check if this directory is already created with:

  file = (FileConnection) Connector.open (localPath, Connector.READ_WRITE);

  If (! file.exists ())

  create dir and the rest of the code...

  When USB is connected, we always get a "IOException: file system error (1003)" on the line "Connector.open.

  Forums for research, we found that this error may be related to the SD card, but the dir refers to the memory of BB, so we do not understand why we are getting the error.

  We noticed that when the USB is connected, the function 'Explorer' in the multimedia menu option shows a message asking the user to disconnect the USB cable to see the files.

  Is this a normal behavior when the USB is connected? If this is the case, is there a standard way to alert the user about this situation?

  Many thanks in advance,

  Kike

  1 only one source can access a system of files at once.  If the microSD card or local storage is used by your PC (via USB), it will be accessible from the smart phone BlackBerry itself.

  You can check this by trying to navigate in this area of the application of media on the BlackBerry smartphone.

• My HP m7580n lost its information system

  I lost my information system and now I can't use the recovery discs, say spywary PC my PC is not allowed to run on this computer too. Also, when I run a check of updates of drivers on pcpitstop it shows my computer to an ASUS instead of a HP. I've heard of a tattoo of the motherboard that may be lost, but I found no answers to that. Does anyone know how I can fix it. Thank you

  Thanks for all the info. I see now it's hp or windows which is at the origin of the restore disks do not to work, because I have so much updated. I thought that the motherboard was the only thing that was needed to keep a hp computer. I wish just that since I bought it, I wouldn't have to go through this when I update my computer to get more life out of it. They make you buy new. For now, I'll get a full copy of XP pro, which is not oem so I for several years without this problem and build my own system too. No more horses. IM starting to see the advantage of building your own model.

  Thanks for your help...

  PS. It was a good article.

• A type of file has lost its association to open with Windows Explorer

  On my machine the XP Acronis True Image Archive of backup .tib file type opens with Windows Explorer and I see in the details of the files in the backup.

  On my machine the association used to be with Windows Explorer Vista, but recently the association has changed. I can't figure out how to restore it.

  When it is correctly associated, I can read files in Windows Explorer, but no more.

  When I right click on the file and select Properties, it gives me the ability to change opens with Adobe Reader, Internet Explorer, iTunes, Media Center, Notepad, paint, PowerDVD, RealPlayer, Windows Calendar, Windows Media Player, Windows Photo Gallery, Word Pad or browse...

  I was hoping to go to Windows Explorer, but I was not able to find it. Is it in a folder hidden somewhere?

  Hello David Reed Peterson,.

  Thanks for the return of the response.   Please see the link below to see if any of the listed steps will fix this for you.

  Windows Explorer has lost its "file Association".

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Windows-Explorer-has-lost-its-file-association/1bd921e8-4747-4968-a7ac-5bfb4b48e32f

  If this started recently, have you tried a system restore to a point in time when it worked correctly?

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Please let us know status

• How to format the RAW file system in my pen-drive?

  Dear friends,

  I have a 2 GB key USB "GENX". I used it for about six months without any problem. But now I have a serious problem that has changed its system of RAW files accidentally. I didn't really know what the reason for that! He didn't connect with any dangerous computer.

  Its file system is FAT 32. It contains a few songs, some software, photos, videos etc, but they are not important. So I don't want to put data files.

  My question is: at y - it software or sort {command type us in the command e.t.c. prompt} to format my USB? I don't want to give anything, I just empty it transform the FAT32 or NTFS file system.

  I use Windows X P-SP3. For 2 months, I searched the entire internet to solve my problem, but no use. I tried many software! They are not useful for me, because they help just to recover the files that it contains.

  When I connect my pen-drive, an error message appears "the disk in drive G is not formatted. You want to format it now? "When I click on YES an other error message is displayed-"Windows failed in the full format.

  If someone help me which can give pleasure to thousands of people. Because when I looked / was asked about this issue, I realized that many suffer from it.

  Dear friends please help...

  BY Abin cherish.

  Dear friends...

  Its with great pride and joy to inform you that I formatted my pen-drive successfully. After almost one and work hard for semesters. I tried several software but they all failed.

  I ask you all to try transcend recovery tool online to achieve this. (link:- http://www.transcendusa.com/Products/ORTCount.asp?URL=Software/OnLineRecovery.exe&action=Download ).

  Its a small tool. He RAW file system format, even if our pen-diving is not made by Transcend. Even if the format successfully completed, we are not able to use the device because it shows that it is write protected. So can you please do the following:

  1) click Start-> Run.

  (2) type regedit and press to enter.

  4) click the plus sign next to HKEY_LOCAL_MACHINE

  5) click the plus sign next to SYSTEM

  6) click the plus sign next to CurrentControlSet

  7) click the plus sign next to control

  8) click the plus sign next to StorageDevicePolicies

  (9) write click on WriteProtect and click on modify.

  (10) if the value is 1 change 0, and then click ok.

  (11) the registry editor close and restart the computer.

  Now, you're done. Your pen-drive is now ready.

  But one of the problems is that we do not have the same space as before. In my case my previous device of ability was 1.87 GB. But after I fixed, reduced ability to 1.67 GB. I'm not worried about it because I think I'm the only one to format this type file system.

  Thank you friends...

• USB stick not recognized even on other computers

  Hey-

  A few days ago I plugged in (USB) flash drive of 512 MB on my desktop Dell (Windows Vista), and that bubble "USB device not recognized" come at the bottom of my screen. I tried to put in the other USB ports, ports on different computers and the same message appeared. This device seems not more in Device Manager (do not even like a disc without a name). This worked perfectly well before flash player. Is there a formatting problem that must be corrected in my USB key, or what is the problem?

  Hello

  If the drive is not recognized at all then you cannot format it no more. Disks wear and/or
  go wrong. Most manufacturers of Thumbdrive have Support FAQ, which 'could' help.

  How to format the USB drive and memory with NTFS
  http://www.online-tech-tips.com/computer-tips/format-USB-NTFS/

  Format a Flash DRIVE with the NTFS file system
  http://www.pctipsbox.com/format-a-USB-drive-with-NTFS-file-system/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I recover my database after losing the file system data.

  Hello world
  
  How can I recover my database in the following scenario.
  
  1 offline full backup made 2 days ago. database was offline archive.
  2. today, I lost my file system data and also lost my all archived files.
  3. I started the database, but the following error is generated.
  
  SQL > startup
  ORACLE instance started.
  
  Total System Global Area 135338868 bytes
  Bytes of size 453492 fixed
  109051904 variable size bytes
  Buffers 25165824 database bytes
  Redo buffers 667648 bytes
  Mounted database.
  ORA-01113: file 1 needs media recovery
  ORA-01110: data file 1: ' D:\ORACLE\ORADATA\ORCL\SYSTEM01. DBF'
  
  4. I copied the data backup system file and wrote the following statement, to recover the database.
  
  SQL > recover datafile 1;
  ORA-00279: change 2234434 September at 2009-07-15 10:52:10 needed to screw 1
  ORA-00289: suggestion: C:\B\ARC00051.001
  ORA-00280: change 2234434 thread 1 is in sequence #51
  
  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  
  
  now, I have no file to archive. are there opportunities to recover the database?
  
  
  R e g a r d s,
  
  Asif Iqbal
  Software engineer,
  Lucky Tex, Karachi,
  In Pakistan.

  are there opportunities to recover the database?

  Yes

  Restore a full backup taken 2 days ago offline.

• Toshiba Regza 46VL743G - playing files via USB stick

  Hello

  I have problems with playback music and videos via USB. I tried to format my USB for different file systems (ntfs, fat, ms - dos, for example) and video formats, but the screen is black, I launch the media player.

  My TV has played with MS-DOS Format the photos, but no mp3 or divx/avi files. I run the multimedia player with 'video' the led of the USB stick flashes, but after a few seconds the led turn off (I think that the stick loses power).
  My other TV (LG 55LE7510 55 '') plays all video files and mp3 without any problem (ntfs and video format *.avi)

  Someone has an idea?

  Hey,.

  Have you tried another USB key and the same thing happens with another USB key? Usually, you use the FAT32 format for your USB key. Then the TV will be able to recognize it and all the files it contains.

  According to the specifications of your TV supports jpeg files (USB and SD card), MP3 (USB) and video DivX SD (USB).

• Help? With the help of file system Ext3 on key USB on Linux RT target

  We have been affected by problems with the SD cards and USB drives formatted in FAT32 on some devices, according to Linus RT of long-term monitoring (mainly the cRIO-9035). It seems that readers are vulnerable to fluctuations in current and unexpected reboots (which are inevitable on these sites). Write aborted operations make the damaged discs, thus sabotaging logging after reboot.

  We have identified two solutions; implement both gives the best redundancy:

  (1) installation of UPS (uninterrupted power supply for emergency supplies/batteries) - done

  (2) using the file system apparently more robust 'ext3', which is available on the target RT Linux (FAT32, ext2 and ext3) - don't have not so far:

  ->, I was not able to properly format a USB stick for ext3. I use the MiniTools Partition Manager and don't get any errors when create and format partitions. But they appear as 'read only' when it is inserted into the chassis of the RT. All attempts to access it, other than to observe the empty folder sdxx in ' / media "is returning errors.

  Someone had a bit of luck with the help of ext3 disks formatted as data drives on the objectives of the RT Linux? It is worthwhile to solve my problems or should I use FAT32 and the observed risk?

  I do not consider this but a temporary solution:

  I ran into issues when you use MiniTools Partition Wizard to partition and format my thumb on Win10 records. An unidentified change makes the inaccessible disks and freeze the browsing of file on the PC when I try to delete the partition. It was quite annoying!

  I decided to try another partition tool and went for the EaseUs Partition Master (free version for the moment). I formatted successfully one of the troublesome discs with it (to add some uncertainty to the solution, I used another brand sp * banking, new PC to do). The reader now mounted in read-write and allows the startup application create the I want to store files in folders.

  I'm very curious to know the difference between the tools of both partitions and their formatting...

• How can I navigate and play MP3 files from a USB stick using Labview 8.0?

  I am a tester to test the USB flash drives connected to the PC.

  I want to browse the file system & playback of audio files, files .jpeg etc in the USB. I have Labview 8.0. When I searched for some examples or screws which can detect the flash drive USB, cannot find a. So if you could point me in the right direction, I can find a solution to my problem.

  Thank you.

  You will probably find some specific examples for this.  A USB flash drive is mounted by the operating system and appears as a new memory storage device to all software on the PC, including LabVIEW.  You can certainly write a LabVIEW program to open the files on the key and the game/run their but I would create a VI who wrote the files on the stick then proofread and checked to find errors at the level of the ILO.  Don't forget that your operating system could do parity check under the hood that would make your test rather meaningless.

  BTW, memory test looking at pictures or listen to the MP3s would be useless of course.  A man cannot see or hear errors at the level of the ILO in a stream broadband.

• Question about creating a recovery (file system) USB flash drive

  Hello and happy new year to all, (I'm from greeece, sorry for the mistakes of language possible)

  (Pavilion dv6-6c01ev - Windows 7 Home Premium 64-bit - bought 08-21-12)

  I want to create a USB stick recovery, and I just bought a USB flash drive 32 GB 3.0 for this reason.

  I've never done it before, but I have read how, according to the this page.

   

  My question is:

  What file system must be the USB key, before the decision-making process? FAT32 or NTFS ?

  Bought, thati USB file system is FAT32 by default.

  I already read that on the page above: 'a message of Recovery Manager opens indicating that the flash drive will be formatted. Click OK to format the USB key and continue. »

  but I would like to have, and a more definite answer from someone who knows better.
  

  So, does change the NTFS file system.

  or should I now start the manufacturing process of the recovery USB flash drive as it is (FAT32)

  Thank you for your help

   

   

  I have already created the recovery USB flash drive, and formatted Recovery Manager the disk before the process,

  and at the end, when the recovery files was written and verifyed.

  I look at the file system of the USB flash drive, and it's NTFS...

  I worried for nothing...

  Thans anyway...

• Is it possible to copy my files to a USB stick and use it as a backup?

  * Original title: computer problem

  Hi guys, first of all excuse my English because it is not my natural language. My problem is this: I think that my office is stressful on me. It's freezing and sometimes it does not start. I'm trying to back up my files, but I'm not. Is it possible to copy my files to a USB stick and use it as a backup? If so should what files I back up? Is it possible to do a reinstall? I have a Dell OptiPlex 745 with windows vista ultimate. Any help would be welcome.

  Kind regards

  Leslie

  Hello

  How to make a backup of files:

  Go to the file/s you want to put (Documents, music, Photos, etc. in Windows Explorer) > right click on it/them > hover over send it to the mouse cursor > select external hard drive or Memory Stick that you plugged them to save.

  And it's method of Dell to backup your data and reinstall of the operating system:

  Restore your Computer´s software to factory for Windows Vista settings

  http://www.Dell.com/support/article/au/en/aubsd1/SLN117599?c=au&l=en&s=BSD&CS=aubsdt1

  See you soon.

• I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file.

  I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file. Can I get help?

  I created a video for our Church on a desktop of Windows 7 through Pinnacle Studio 14 (editor) and registered as a .mp4 file. I then put it on a flash drive and put the flash drive in the computer of the Church, that is running Windows Vista, and the file will not play. Please provide help quickly!

  -Corey

  You need a media player that is compatible with .mp4 files.

  The following preferential ticket should solve your dilemma.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.