USB stick not recognized by the computer. Have tried all the options I can think about.

Similar Questions

• USB stick not recognized by any computer

  Two days ago, that I restarted my computer for the updates to be installed. By mistake I left my USB drive (8 GB Sandisk) plugged during the entire process. Now, my computer, or any other computer will recognize. Sometimes the light and sometimes it turns off when I plug. I went to disk management, but it does not recognize. The only sign that it always works, it's recognized as USB human interface device. Any ideas on how to fix or is longer that it won't work? X.

  The USB is damaged. Throw it out. If the data on this subject are crucial and you have not saved it elsewhere, you can send the USB drive to a professional data recovery company, but it will be quite expensive. If you want to explore this avenue, I recommend to drive savers . MS - MVP - Elephant Boy computers - don't panic!

• 1 t verbatim USB stick not recognized by the system and will not work

  I used my USB from Verbatim 1 t hard drive in the past and it still works on my Vista computer, but know is is a USB 'unrecognized' device and does not work on my XP.  In the system hardware listing is visible, but there is no driver for it and not available from my computer.  This disc is missing?  How can I get this, my backup disk, of the function?

  Hello

  Try the steps of troubleshooting mentioned in the links below and check if the problem persists.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Note:

  BIOS change / additional settings CMOS (semiconductor) to oxide of metal bad cancause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

  http://support.Microsoft.com/kb/314634

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

• Keyboard Dell Bluetooth is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.

  My Dell Bluetooth keyboard is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.  I use keyboard now, but it seems not be installed yet when I check my keyboard or bluetooth devices. Keyboard does not work after so I'll try to figure out what to do before moving into the power saving mode. Help, please. I did all the updates from microsoft, and there is no update for my bluetooth device, I checked.

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the model of the keyboard?
  3. are you an error message or error code?
  4. which version of the Windows operating system is installed on your computer?

  I suggest you to consult the following Microsoft article and check if it helps.

  On troubleshooting in Windows 7 power management: http://support.microsoft.com/kb/980869

  Troubleshoot keyboard: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

  Keyboard and Microsoft mouse refer:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Reference:

  Troubleshooting external Dell Wireless or Bluetooth keyboards and mice: http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_1

• USB device not recognized by my computer at all the

  OK, so my problem is my 16GB Verbatim USB is not recognized by my computer at all. I tried to go to devices in the control panel and it is, but the box is grayed out. The problem that my USB has worked constantly (it would be a huge problem because of all my school work that's out there) and if so, is it possible possible to retrieve the information off it? What is an easy problem to solve.

  Help please?

  Thank you

  Hi Teagan,

  1. do you get an error message/code?

  2 do you have similar problems with other USB devices?

  3. the problem occurs on a different computer?

  This problem may occur because of the bad or corrupt drivers or the appliance itself is damaged.

  Here are some ways you can follow to resolve the problem:

   

  Method 1:

  Connect the device to a different USB port on your computer in order to eliminate all the problems that are associated with a specific USB port.

  Method 2:

  Check out the link and follow the steps in the article:

  What to do when a device is not installed correctly

  http://Windows.Microsoft.com/en-in/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  See also:

  Install a USB device

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Install, view, and manage your devices and printers

  http://Windows.Microsoft.com/en-us/Windows7/install-view-and-manage-your-devices-and-printers

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows/Update-driver-hardware-ISN

  If the problem is related to the craft and to retrieve the information about it, you can also contact the verbatim support for assistance:

  Reference:

  http://www.verbatim.com/support/

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Hi, I currently pay monthly to the handset Lightrrom 5/Photoshop but I need to be able to merge several images in "Merging HDR" but is not one of the options I can choose currently highlighted.  I guess I'll have to move to Lr 6 but I"

  Hi, I currently pay monthly to the handset Lightrrom 5/Photoshop but I need to be able to merge several images in "Merging HDR" but is not one of the options I can choose currently highlighted.  I guess I'll have to move to Lr 6 but I am struggling to see online how to change the plan?

  I suppose you're running a 32-bit Windows version - if PS CC 2015 is available but LR CC 2015 is not.

  Help / System Info in LR 5 and look for Application Architecture and System Architecture a few lines down in the list of information.   Something with a 32 or x 86 is 32-bit.  Something with x 64 is 64-bit.

  You will need a 64 bit OS to run LR CC or LR 6.

• USB stick not recognized even on other computers

  Hey-

  A few days ago I plugged in (USB) flash drive of 512 MB on my desktop Dell (Windows Vista), and that bubble "USB device not recognized" come at the bottom of my screen. I tried to put in the other USB ports, ports on different computers and the same message appeared. This device seems not more in Device Manager (do not even like a disc without a name). This worked perfectly well before flash player. Is there a formatting problem that must be corrected in my USB key, or what is the problem?

  Hello

  If the drive is not recognized at all then you cannot format it no more. Disks wear and/or
  go wrong. Most manufacturers of Thumbdrive have Support FAQ, which 'could' help.

  How to format the USB drive and memory with NTFS
  http://www.online-tech-tips.com/computer-tips/format-USB-NTFS/

  Format a Flash DRIVE with the NTFS file system
  http://www.pctipsbox.com/format-a-USB-drive-with-NTFS-file-system/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Constant pop up of the notice that says "USB device not recognized" after the device has been disconnected

  Trying to connect a Sony W760 to PC Suite and receive the notification as the "peripheral USB is not recognized. Clicked on the indications of alert and monitoring. The device is not installed. Computer restarted, but the alert keeps popping up every 10 to 15 seconds. How to stop?

  Found the answer to the problems by accident. I had turned off my Avast, during the installation of the programs, but did not know that the computer came with Norton already active. Nothing on the screen noted that it is there. The Sony site, under the heading troubleshooting USB and I saw it mentioned to disable McAfee. Became curious and went to control panel > programs and features looking around and found the Norton. Uninstalled, downloaded programs from Sony, install and everything works fine. Just a reminder, check all your security system before installing programs.

• USB stick not recognized when you try to copy network settings

  trying to Setup network printer and need to copy my network settings on a USB stick and transfer to the printer wireless.

  When I plug the USB in the system recognizes the disk put option on the screen doesn't change to the other to allow the settings file be saved.

  I tried 2 different laptops and 2 different usb drives.

  Hi GavinStrik,

  You can try to reformat the usb drive and check.

  You can try to plug the drive and make a backup of the data and try to format the drive.

  Note: Before you reformat the player take a backup of the data.

  For more information, please visit the following links:

  Formatting disks and drives

  http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

  Hope this information is useful.

• USB-6009 not recognized after the blue screen of death

  I have two devices USB-6009, used with NOR-DAQmx and Labview to make some analogue simple analogue input and output.  The USB box - two 6009 were previously works very well on this PC.  Recently, I got a blue screen of death, associated with a different USB device to (non - OR) connected to the PC.  I not save the information of the blue screen of death.  When I restarted the computer, the USB-6009 devices were no longer recognized by Labview / MAX.  The Green LED on the USB - 6009 s do not come.  The USB - 6009 s appear in the Device Manager of Windows with a yellow exclamation point ("Windows cannot load the driver for this hardware device").  If I connect the USB-6009 case to another PC, MAX recognizes them on this PC, and I get the usual flashing green LED.  If I connect another USB-6009 (never connected to this PC), I get a green LED solid, and, says Windows cannot load the driver.

  I am running Vista, Labview 8.5 and NOR-DAQmx 8.9.  I rebooted 5 - 6 times, I tried disabling and the reactivation of the USB-6009 by windows Device Manager, I tried the options "update driver" in Device Manager.  Any advice on how else to solve it?  Thank you!

  The driver update and turn do nothing to the main driver - DAQmx. Reinstall or repair that.

• USB stick not recognized when creating recovery disc in Windows 8.

  Original title: Recovery Media Creator prblem

  Hello-I have a desktop K430 Lenovo with a 1 to HDD, Win8 64 b, 12 GB of memory. I'm trying to create a recovery disc using a flash drive HP with 32 GB. I bought a 2 GB Tech Universe that should do the job, but the Recovery Media Creator suggest 16 GB.

  I installed USB Flash Drive 32 GB HP which is identified as HPv125w (F): the computer and selected for how to manage the unknown data or take any Action. I formatted the Flash Drive ENF to match my file system. I also chose computer /Devices removable and open as portable devices in the hope that the flash player would be recognized by the Recovery Media Creator, but it didn't happen.

  I run the following command to create a Recovery flash drive:

  Control Panel/All Control Panel Items/Recovery/create a recovery disk/copy the recovery partition from the pc on the recovery drive (I checked this assertion). I clicked NEXT to continue the process.  I was instructed to connect a USB and the reader must be able to contain at least 16 GB. He also said that everything on the disk is deleted. Identity of the flash player (HPv125w (F) does not appear on the page of recovery media and THEN is grayed out. I need help with this problem.  After checking the Microsoft Community, I learned that I could use search from the start page or opening of office and enter recoverydrive.exe and make appear the Recovery Media Creator. I performed this task once again, but I got the same results, as shown above. Thanks in advance.

  Hello-I have a desktop K430 Lenovo with a 1 to HDD, Win8 64 b, 12 GB of memory. I'm trying to create a recovery disk

  Identity of the flash player (HPv125w (F) does not appear on the page of recovery media and THEN is grayed out. I need help with this problem.

  You can also try using diskpart to his list volume control just to compare his view of this device.

  BTW, there is another user of Lenovo, who tries something similar but without keyboard to help...

  http://social.technet.Microsoft.com/forums/IE/en-us/04e45c11-b5c0-48b0-AB58-3f96a1040e40/how-to-restore-Windows-8-from-a-recovery-USB-on-a-Tablet-Wo-physical-keyboard

  I think that it may actually be further ahead than you?    ; )

  Good luck

  Robert Aldwinckle
  ---

• NEITHER USB-6501 not recognized by the system

  Hi all

  I wrote this simple application that writes and reads a SPI frame.

  My PC have Labview 8.5.1 and DAQmx 8.7.1 (the CD was provided with my unit NI USB-6501). Everything works fine.

  But now I need to distribute the application, and I need to run it from a computer that does not have LabVIEW.

  I installed the latest versions of the runtime of LV (8.6), and the 8.7.1, DAQmx software but the program crashes produce an error (code 200477).

  I tried to install a more recent DAQmx software (8.9 full, engine of execution of 8,9 only), but the situation has not changed.

  Also: I tried on two different PCs, and I launched MAX: one of them doesn't even recognize that a DAQ hardware is installed (even if Windows recognizes as a work device).

  Anyway, the two PCs return error 200477.

  Any help will be much appreciated.

  Best regards

  Is - this dev4 on the pc without LabVIEW? You can easily see the device name in MAX.

• USB stick not recognized by Device Manager

  I have a USB drive which worked in my Vista SP2 machine for 2 years until I took it.  I tried to run recently.  Even if the machine recognizes the connection and the removal of the disc with the bong audio, it does not appear in my computer, in the Manager device (like a USB Mass Storage Device - hidden or otherwise) or in the management of Computer Management(for doing fdisk/format functions) disk.   When I insert or remove the disc, the lists of USB in Device Manager do not seem to change.

  I tried to delete infcache.1, but in vain.

  The player with the same cables and the power supply, is recoqnized and works with other systems my Vista SP2 and SP3 of XP so I can exclude it as does not.

  Dig dig into that.  The pilots were to be reloaded, I noticed there is a USB 2.0 mass storage device listed while Vista searched through the database driver.  As soon as it is loaded, the name was changed to Cypress AT2LP (chip Cypress is the controller of housing) and the drive has disappeared.  Did a search for this and it seems that it is a problem running under Vista (drive works forever and then one day things change after an update to Vista).  Rename the driver (CYUSB.sys) and then reboot didn't help.

  I took the car to the most recent machine Vista and noted that the pilot has been there for a (USBSTOR Generic USB mass storage device. (SYS).  The drive works now.   Not sure where this storage of Cypress driver came (I certainly didn't not using it), but that was the problem.

• USB drive not recognized on the A30-151 in XP

  After a clean install of Windows XP Pro on a Satellite A30 151, a USB device remains in the category 'Other' (after installation of the graphics and audio drivers, modem) for which no driver seems to be available on the drivers CD. At this point, the category "USB" contains four entries, two standard "Universal Host Controllers" and two "OpenHost' controllers, with the default drivers.
  I suspect that the missing device can be a USB 2.0 "PCI controller host improved USB" from another manufacturer, but Toshiba does not offer a driver for XP for it then it should be supported by the OS (?).
  Any suggestions as to what can be and what drivers need?

  It turns out that XP does support USB 2.0 according to the SP1, it seems a pre - SP1 version of XP Pro leads the native Windows drivers is not available. For anyone in a similar situation, it seems as if a) upgrade to SP1 or b) install the hotfix Q312370)

  http://www.google.com/search?hl=en&q=Q312370_WXP_SP1_x86_ENU.exe

  for the English version should throw a lot of download sites) followed by the autodetection of the native Windows drivers should do the trick. However, the following SP1 problem may come into play

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001c0d

  in this case, the "NEC PCI to USB Enhanced Host Controller B1" driver required original can be found by searching for "USB driver" for "Windows 2000" for the Satellite A30 Toshiba driver download page.

• Maxtor OneTouch II 300 GB external hard drive USB/FireWire not recognized by the computer

  Title: Maxtor OneTouch II 300 GB USB/FireWire external hard drive of origin

  I found my old external hard drive and I wanted to access some old photos. Since I bought the drive, I have upgraded to Windows 7. Windows does not see the hard drive after updating the usb drivers. I look in the tab of the computer and no hard drive. I looked in disk management and I see it but it won't initialize. Shows the error, and that's all... HELP!!!!!!!!!!!!!!!!!

  Hello

  
  1. have you checked if the external drive is detected on another computer?
  2. What is the exact error message you get when the task fails?
   
  To work with the issue, check out the following link.
  
  My drive does not appear in Windows Explorer
  
  http://support.Microsoft.com/kb/330140
  
  Check if it helps.