NEITHER USB-6501 not recognized by the system

Similar Questions

• 1 t verbatim USB stick not recognized by the system and will not work

  I used my USB from Verbatim 1 t hard drive in the past and it still works on my Vista computer, but know is is a USB 'unrecognized' device and does not work on my XP.  In the system hardware listing is visible, but there is no driver for it and not available from my computer.  This disc is missing?  How can I get this, my backup disk, of the function?

  Hello

  Try the steps of troubleshooting mentioned in the links below and check if the problem persists.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Note:

  BIOS change / additional settings CMOS (semiconductor) to oxide of metal bad cancause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

  http://support.Microsoft.com/kb/314634

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

• Keyboard Dell Bluetooth is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.

  My Dell Bluetooth keyboard is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.  I use keyboard now, but it seems not be installed yet when I check my keyboard or bluetooth devices. Keyboard does not work after so I'll try to figure out what to do before moving into the power saving mode. Help, please. I did all the updates from microsoft, and there is no update for my bluetooth device, I checked.

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the model of the keyboard?
  3. are you an error message or error code?
  4. which version of the Windows operating system is installed on your computer?

  I suggest you to consult the following Microsoft article and check if it helps.

  On troubleshooting in Windows 7 power management: http://support.microsoft.com/kb/980869

  Troubleshoot keyboard: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

  Keyboard and Microsoft mouse refer:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Reference:

  Troubleshooting external Dell Wireless or Bluetooth keyboards and mice: http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_1

• Portégé R700 - 15L - 3 G is not recognized by the system

  Hello

  I already bought this laptop and I have problem with 3G driver to work.

  I downloaded the latest drivers from the website, but the device was not recognized by the system?

  Any ideas how to fix?

  Best way to fix this is to install the original OS, you got with this portable Portege. Original recovery image contains all the necessary drivers and tools and utilities.

  When you use the FN + F8 key combination what options are available?

• Constant pop up of the notice that says "USB device not recognized" after the device has been disconnected

  Trying to connect a Sony W760 to PC Suite and receive the notification as the "peripheral USB is not recognized. Clicked on the indications of alert and monitoring. The device is not installed. Computer restarted, but the alert keeps popping up every 10 to 15 seconds. How to stop?

  Found the answer to the problems by accident. I had turned off my Avast, during the installation of the programs, but did not know that the computer came with Norton already active. Nothing on the screen noted that it is there. The Sony site, under the heading troubleshooting USB and I saw it mentioned to disable McAfee. Became curious and went to control panel > programs and features looking around and found the Norton. Uninstalled, downloaded programs from Sony, install and everything works fine. Just a reminder, check all your security system before installing programs.

• USB stick not recognized by the computer. Have tried all the options I can think about.

  Very well.  I have a S-Mini Patriot 32 GB flash drive that does not recognize my HP Slimline 400-434 Windows 8.1. In my view, he acknowledged once and has refused to do since. My laptop (Windows 7 Toshiba) recognizes very well.

  All other devices USB function perfectly on this computer. USB hub mouse, keyboard, USB, cable Apple iPhone.

  1. I tried to unplug all other USB devices before trying this one. IN CASE OF FAILURE

  2. I went to device management and the USB does not appear in the list. IN CASE OF FAILURE

  3. I uninstalled the USB root hubs and restarted the computer. IN CASE OF FAILURE

  4. I tried to plug in the USB ports on the back that plug directly into the motherboard. IN CASE OF FAILURE

  5. I have updated the drivers, and have been unable to find a update of the BIOS as the link on the HP download site and told that it is incompatible to my computer. IN CASE OF FAILURE

  .. then what the hell gorram bloody I do now?

  Good and the most ridiculous way, I never solved a technical problem...

  Failed to insert the USB flash in the port. She has to insert slowly, so that the contacts are aligned.

  I found it trying to connect to it in my USB hub and noting that the witness red light was going on and outside that I inserted the USB key, flicker on as I inserted it there and then off once it is all the way in.

  Weird. But good. It works now.

• USB-6009 not recognized after the blue screen of death

  I have two devices USB-6009, used with NOR-DAQmx and Labview to make some analogue simple analogue input and output.  The USB box - two 6009 were previously works very well on this PC.  Recently, I got a blue screen of death, associated with a different USB device to (non - OR) connected to the PC.  I not save the information of the blue screen of death.  When I restarted the computer, the USB-6009 devices were no longer recognized by Labview / MAX.  The Green LED on the USB - 6009 s do not come.  The USB - 6009 s appear in the Device Manager of Windows with a yellow exclamation point ("Windows cannot load the driver for this hardware device").  If I connect the USB-6009 case to another PC, MAX recognizes them on this PC, and I get the usual flashing green LED.  If I connect another USB-6009 (never connected to this PC), I get a green LED solid, and, says Windows cannot load the driver.

  I am running Vista, Labview 8.5 and NOR-DAQmx 8.9.  I rebooted 5 - 6 times, I tried disabling and the reactivation of the USB-6009 by windows Device Manager, I tried the options "update driver" in Device Manager.  Any advice on how else to solve it?  Thank you!

  The driver update and turn do nothing to the main driver - DAQmx. Reinstall or repair that.

• USB drive not recognized on the A30-151 in XP

  After a clean install of Windows XP Pro on a Satellite A30 151, a USB device remains in the category 'Other' (after installation of the graphics and audio drivers, modem) for which no driver seems to be available on the drivers CD. At this point, the category "USB" contains four entries, two standard "Universal Host Controllers" and two "OpenHost' controllers, with the default drivers.
  I suspect that the missing device can be a USB 2.0 "PCI controller host improved USB" from another manufacturer, but Toshiba does not offer a driver for XP for it then it should be supported by the OS (?).
  Any suggestions as to what can be and what drivers need?

  It turns out that XP does support USB 2.0 according to the SP1, it seems a pre - SP1 version of XP Pro leads the native Windows drivers is not available. For anyone in a similar situation, it seems as if a) upgrade to SP1 or b) install the hotfix Q312370)

  http://www.google.com/search?hl=en&q=Q312370_WXP_SP1_x86_ENU.exe

  for the English version should throw a lot of download sites) followed by the autodetection of the native Windows drivers should do the trick. However, the following SP1 problem may come into play

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001c0d

  in this case, the "NEC PCI to USB Enhanced Host Controller B1" driver required original can be found by searching for "USB driver" for "Windows 2000" for the Satellite A30 Toshiba driver download page.

• Satellite Pro L100 132: old RAM is not recognized by the system

  The original memory of our laptop (Satellite Pro L100-132) is 512 MB.

  I bought an extra memory to 1 GB (type has been verified in the product documentation).
  I installed the additional memory, the system starts and you can see the additional 1 GB memory.

  However, the system does not see the original memory of 512 MB, additional memory is installed on the laptop.

  The system should see memory original and extra, because according to the specification for the serial number of the cell phone (checked on the official website of Toshiba) the maximum memory (which can see the system) is 2 GB.

  I tried to transpose the place of original and additional memory between them, but the problem is the same.
  Updated the system BIOS does not solve the problem at all.

  Hello

  As writes the user above, there seems to be problem of compatibility and updating the BIOS will not help you. A malfunction of the compatibility between the old and new module of RAM which s

  This new module of RAM you bought?

  I think you need two modules of RAM high quality they are compatible together. You can order these ASP RAM modules in your country. Quad has already posted part numbers.

  Check this box!

• HP Pavilion Slimline s5212y: my camera to DVD A DH16AAL ATA s5212y Pavilion not recognized in the system after the installation of Windows 10.

  After you have installed the free version of Microsoft Windows 10, I realized that my DVD was neither effective nor recognized in Device Manager. Try as I may to address the support of hp in any problems and try to find updates or fixes to the problem, I have since restored my OS to the older operating system to Windows 7.

  I would like to know if there is a simple patch patch out there in the community that would allow my DVD-ROM to 'see' if I chose to upgrade to Windows 10?

  If there is a "patch" of sorts, I need to have the new operating system installed first?

  Hello:

  The only suggestion I can offer if you haven't tried these, would be to perform the steps listed in each step resolution 3 or 5 from the link below.   Try them both.

  https://support.Microsoft.com/en-us/KB/314060

• connect to the computer using a usb cable, not recognized by the computer

  Hello

  the ZTE open, I already checked the "usb mode" in the settings, but the computer can not see my storage when it is connected by a usb cable, so I can't transfer any file on.

  Draft of microSD on the device is quite embarrassing, an idea?

  Ah, never mind, just, it fixed itself. None.

• Hardware not recognized by the system

  Hello. I use Windows Professional SP3 and it says its hardware installation and won't let me use the Add Hardware Wizard.  I saw an answer to use Microsoft Fixit, but unfortunately, it says my system is not supported. Is there anything else I can do?

  I have

  Hello. I use Windows Professional SP3 and it says its hardware installation and won't let me use the Add Hardware Wizard.  I saw an answer to use Microsoft Fixit, but unfortunately, it says my system is not supported. Is there anything else I can do?

  I have

  Hi Theross...

  When you get this message? You say what kind of material is it?

  You can use the PC when it starts on the desktop? If you can, do the following:

  Click Start, run and then copy / paste the following command, and then click OK: msinfo32
  (If you have run on the start menu, hit instead of key Windows + R)

  When the menu msinfo32 opens, open the tree in the left menu and then click "problem devices".  Nothing is displayed in the right pane when you do this?

• My Nec DVD RW ND-3520AW drive is not recognized by the system due to the corruption of recording possible

  I have a Gateway desktop and 510 x 86 with Windows XP Home SP3 and Internet Explorer 8.  My system does not recognize my DVD NEC drive due to recording possible file corruption.  How can I clean or set registry entries and/or device driver and get Device Manager to recognize the drive?

  http://support.Microsoft.com/kb/314060

  FixIt have a bad reputation on this forum, so you can go directly to "fix it myself" bit (for XP).

  Let us know how you go.

  Tricky

• USB ports not recognized on the computer.

  erased win 8 and reinstalled win 7 ultimate. Now computer will not recognize and usb ports. What should I do?

  I use a Compaq Presario 5320. USB works, that I plug my Saitek yoke and it works correctly. It's only usb drives I plug in I get the message, that he doesn´t recognize...

  TA

  The problem with coming back to win 7 is may or may not win 7 drivers.  I would contact Compaq to see if there is win 7 drivers.

  Another problem if your computer comes with win 8 pre-installed revenant may void the warranty

• Maxtor OneTouch II 300 GB external hard drive USB/FireWire not recognized by the computer

  Title: Maxtor OneTouch II 300 GB USB/FireWire external hard drive of origin

  I found my old external hard drive and I wanted to access some old photos. Since I bought the drive, I have upgraded to Windows 7. Windows does not see the hard drive after updating the usb drivers. I look in the tab of the computer and no hard drive. I looked in disk management and I see it but it won't initialize. Shows the error, and that's all... HELP!!!!!!!!!!!!!!!!!

  Hello

  
  1. have you checked if the external drive is detected on another computer?
  2. What is the exact error message you get when the task fails?
   
  To work with the issue, check out the following link.
  
  My drive does not appear in Windows Explorer
  
  http://support.Microsoft.com/kb/330140
  
  Check if it helps.