USB storage turn on users

Similar Questions

• Repeater wireless WRT1900AC + USB storage device

  For my setup, I had to use this router in wireless Repeater mode and continue to share USB storage. To my surprise, I found that the USB storage function wasn't available anylonger as well as most of the other functions. The problem is that I can not, and surely there is no rational explanation for why the function of USB storage isn't here as

  1 opportunity Samba server has no requirements for a device to be a MAIN router hosting

  2. the router assigned IP address (DHCP server or statically) seeps

  3. the router was also named network assigned

  So my question here is really not WHY, but rather WHEN it will be addressed by Linksys Engineering? Must still hope us to achieve this functionality is enabled in future versions of the firmware.

  I did the below application functionality with Linksys Engineering about this thread:

  ---------------------------------------------------------

  Feature Request for the series of EA USB storage routers

  Users request the storage USB not be disabled when the router is in one of its Modes of Repeater\Bridge.

  ---------------------------------------------------------

• How can I prevent users to connect to a USB storage device?

  I would like to block the connection to a device of USB storage except adminisator account?

  Referring to the following link, there are no instructions on how to do it.

  Anyone have any suggestions on how to do this in Windows 7?
  Thanks in advance for your suggestions :>

  http://support.Microsoft.com/kb/823732

  You need to remove the menu setup USB device, as if it was never installed. Physically

  Remove the USB device - run USBDeview and remove it - Reboot - then set up the
  Users do not allow a USB - reboot and you connect as a user - NO ADMIN - try to insert
  the device.

  You can get more ideas on the TechNet forums I listed previously.

  You have really need professional or above to be able to set security policies.

  Rob - SpiritX

• WNR2200 Netgear ReadyShare USB storage does not

  I have trouble getting the USB ReadyShare working on my router Netgear WNR2200 storage. If I reset the router to factory by using a paper clip and now the reset button in and then just connect a computer to Ethernet, 1 Port, it works fine and I can access by typing just "\\readyshare" in windows Explorer. Unfortunately I can not leave the router with its factory settings as it is not good for my network, I disable DHCP, because it's the 3rd router on my network. The router itself works great when I do that, all the computers connected to have a connection to the internet and can also connect to each other etc... purpose storage readyshare file sharing no longer works. It's just as if she is not there.

  While I was trying to experiment when he actually stopped working, so I reset the router to factory settings and started again. Connected to the computer first to 1 Port Ethernet and it worked fine as before. Went in the router settings and turned off DHCP and it has always worked well. It is only when I actually connect the router to other routers which ReadyShare USB storage stops working. When it is assigned an IP address from my main router which is the DHCP I guess? I don't know why that's upsetting it well? I checked on the same workgroup (a setting that I didn't notice initially) but also makes no difference.

  Does anyone have an idea what I am doing wrong? I guess it is just configured wrong and it's probably something really simple, but I can't see it. Any help would be much appreciated, thanks!

  Simon

  Change the LAN IP is affecting an IP address on the WNR2200 to be in the same range of main router.

  You will be able to change this in the LAN Setup.

  The steps would be:

  1. do you have a computer just be directly to the WNR2200 and nothing else.

  2. navigate to the router admin page.

  3. change the LAN IP to a unique IP address, such as 10.0.0.200 or one IP address that is not used in the network.

  4 disable DHCP.

  5. once the settings are saved, connect the main router to one of the WNR2200 LAN ports.

  From there, you should be able to access the USB key.

  Let me know what happens.

• Disable the peripheral only USB storage drive?

  How can I disable only USB key in windows XP Professional without disable keyboard and mouse because these are fixed with USB ports.
  Operating system: Windows XP Profesional

  Hi adeelahmed,

  See the Microsoft article below and try the steps mentioned, check if it helps.

  How can I prevent users to connect to a USB storage device?

  http://support.Microsoft.com/kb/823732

• When a pop-up message indicates that a storage device has just been attached and I don't put a USB storage device into the computer at all, what that means?

  From time to time, (isn't that every now and then, not every day or every week) a message appears on the computer screen to notify that "a storage device has been attached... and something or other on a port '-as it would if a new hardware device had just been installed or removed... only, I have not attached at a storage device.

  In fact, apart from the scanner, printer and keyboard connected, which are already inserted until the computer is turned on, no USB storage device or any other thing seized or inserted into the computer when this message is displayed on the lower right screen where the icons on the desktop are,

  Why would this happen unless I had personally inserted/joint a USB stick storage device myself in my computer?

  I'm afraid that maybe someone to access details and store information from a remote location via a storage device? Is this possible?

  And if it's an error of some sort, how to fix this problem?

  Please notify. Thank you.

  This probably means you have a bad USB connection somewhere.  I got this a lot when I used markets good USB hubs.  It also happened a lot on a couple of the USB plugs on my old laptop 4 year, where I had plugged in and out things in them so that the connectors are not as strong as they were when new.  My main office more connected devices above that outputs 4 USB, that I had on the back, so I finally bought a card extension to add 4 more exits USB.  If this is your case, perhaps you could do the same.  Expansion cards are not very expensive, usually in the range of $ 15 to $ 25, and they are fairly simple to install.

  I hope this helps.  Good luck.

• EA6400 Problem FTP USB Storage

  When I do not restrict access to the files I can reach them by FTP

  

  When I restrict access I can't reach them more

  After usin my login, I got this screen

  

  As seen: the Transcend is not visible.

  Yes, I have the right to see and write about the USB storage.

  Anyone a suggestion?

  Use username: admin and password: the router password (default admin). Do not use your Linksys WiFi Smart password.

  Are you able to access the drive locally using the user Remi? The fact that you have checked the part of Transcend when you created the user Remi?

  Try the suggestion of Chadster by creating a new user, and then clear the browser. Or you can try using a different computer.

• EA3500 USB storage security

  I am the administrator of my HOME network and I would be the ONLY access to certain folders on a USB storage device.  I know that there is an administrator account and guest, already established which cannot be deleted.  As my HOME network admin I just type my user name and password in the admin area and then click on share?

  If you use a PC open a file browser and enter the following in the address bar

  \\192.168.1.1

  If you use a Mac open a browser and enter the following URL in the address bar

  SMB://192.168.1.1

  You should be prompted to enter a user name and password.

  In some cases, must be added the part about the end of the URL.

  Ex: \\192.168.1.1\my-share-name

• Problem with ZTE MF190 Dongle ("USB mass storage) with the group policy restricted USB storage.

  Please

  I have windows 7, Member of the domain, we created the policy in the domain controller to restrict any USB storage device and it works well.

  My problem is: when I install ZTE MF190 Dongle (USB Modem Stick) first time as administrator it work well, but when restart windows and switch the usb modem, connect as user limited to work, it has not detected (Modem USB Stick) in windows and I found in the "USB mass storage" Device Manager with yellow mark and tied to the usb modem.

  My question is: how except "USB mass storage" which associated (Modem USB Stick) of limited strategy of USB storage for the usb modem work.

  Note: I've updated "USB mass storage" windows with compatible driver (USB composite device), the modem worked, but when restart it windows that the same problem with "USB mass storage" brand yellow and usb modem not detected again in windows.

  Help, please.

  Hi Yahia,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

• USB block of the user accounts in Windows 7

  How to restrict USB access for user accounts in Windows 7.

  This might help:
   
  http://www.askvg.com/how-to-disable-restrict-use-of-USB-storage-devices-in-Windows/
   
  
  --
  Richard Hay
  http://WindowsObserver.com
  Unofficial Microsoft and Tech evangelist
  "I'm a PC!"
  MVP Windows Desktop Experience

  "Vanessavenes" wrote in message News: 3f1488cb-7335-4583-9fd5-d610c09cbd91...

  How to restrict USB access for user accounts in Windows 7.

• Allow access to the USB Reader under account 'user '.

  Hello world

  Need help to allow access to the usb ports so that users can use a card reader to download stuff on a web application, we have.

  The great way would be able to push on HP device Manager (I v4.5) and Thin Clients are T610 running WES7

  Any help is appreciated.

  See you soon,.

  The local user account is configured to restrict access to the Z:\ only through NoDrives policy.  See http://technet.microsoft.com/en-us/library/cc938267.aspx for more details.

  To make life easier, there are calculators that you can use to determine what should be this entry of 32 bits, based on drive letters you want hidden.  An example is http://www.wisdombay.com/hidedrive/index.php.  The default value for Z:\ is only 0x01ffffff (33554431).

• Satellite Z830 - backup on USB storage drive recovery

  I need to make the backup of this Z830 recovery system.
  But unfortunately, the system does not recognize the usb storage drive to make this recovery.

  Obviously, the storage usb drive have plenty of space and OK to work on this Z830.

  Any suggestions?
  Thanks in advance

  Hello

  The recovery image can be created on a CD/DVD disc or USB memory stick. As far as I know you cannot use a common USB HDD for recovery.

• IX2 - usb storage device?

  I have a storcenter ix2 and wonder if it can be used as USB storage connected in local device or is it strictly a SIN?

  Thank you

  DTK,

  The ix2 is strictly a NAS.

  However, these things can be circumvented these days.

  If you are inclined to do, you can buy a USB adapter to Ethernet and / access handle the actions in this way.
  https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=USB+to+Ethernet+adapter

• Notification of 'removed USB storage device' persistent.

  Hello

  My motorcycle G shows after persistent notification.

  'USB storage deleted '.

  Removed USB storage. Insert new media. "

  This notification is displayed after removing the Flash drive by removing it from settings-> storage and pulling the OTG with the drive cable. The notification seems to be stubborn and it can not be erased it unless the device is reset. It isn't harmful, but because of my OCD (mandatory disorder that) for the verification of notifications is causing irritation.

  I notice that only KitKat 4.4.2 and not JellyBean 4.3.

  Any ideas to clear the notification? or is this a bug?

  Thank you

  Ngom

  Update:

  I uploaded a screenshot and added a correction in question (the correction is in bold).

  Hey all,.

  This bug has been reported and a fix is under way.

  See you soon,.

  Nicole

• HP Compaq 8100 Elite: Boot interrupted by the USB storage device

  If I have any sort of plugged when starting USB storage device, I just get a blank screen with a blinking cursor.

  I disabled each device start-up apart from the internal SATA hard drive and it still happens.

  Finally I found a BIOS update.

  On the HP consumer Support Site? NO.

  On an alley, ad - ridden, dirty pilots-for-all site.

  Anyway. It worked