USB tethering switch on HP 7 1800

Similar Questions

• Satellite Z30 - A - USB tethering Smartphone Galaxy Note 3 does not work

  Hello

  for me USB attach a Note 3 Galaxy and a Toshiba Satellite Z30 - A do not seem to work (well) with an almost out of the box system.

  I just bought a Toshiba Satellite Z30 - A with 8 (.1) of Windows that has been updated through Windows Update for the latest patches from Microsoft and Toshiba tools for the latest updates it. The McAfee software product has been removed.

  I can work with the Galaxy Note 3 just fine in MTP mode / charging. Unfortunately, as soon as I turn on USB tethering on the phone, the Windows networking subsystem 8.1 passes by blocking fashion and nothing comes right out of it. I tried to disable the stack IPv6 complete to the point Windows 8.1 but did not have all that much success.

  I use the right Remote NDIS driver (by Microsoft); I remember having used successfully before USB tethering, and it seems sort of work on an aging Windows 7 installation with the same phone on another laptop.

  Any suggestions on how to get USB tethering to work reliably and quickly in the above configuration would be greatly appreciated.

  I understand that I am facing too many variables, including the operating system (tails), the Toshiba system utilities / implemented USB 3.0 and firmware Samsung Galaxy 3 Note.

  Hey. Happy to know that you have solved your problem. Thanks for the comments. It may be useful to other users of the forum.

• Poor USB tethering on my bike E

  As the title suggests, the usb tethering is very slow on my bike E. It is not the network, because I have already tested the same SIM card on another device and USB tethering with this unit works very well. It is not my PC either because I tested my phone with another PC and it is still slow. Wi - Fi tethering is however very well. But I can't test the bluetooth tethering because I don't know how to operate.

  Please answer quickly because I use my phone as my internet connection

  I'm not 100% sure on the E. You have the option of daydream?
  setttings-> display->-> when_to_daydream daydream-> while loading
  Or enable developer options:
  parameters-> phone-> tap the box build number about 10 times - it will be
  say "now you are a developer then go in."
  settings-> options-> stay awake developer

• SL500, Windows 7: Problems with the interface audio external Firewire and Digitus USB KVM switch

  Hello

  I have an audio interface, Presonus Firestudio Project, which connects via Firewire to my Lenovo SL500. On the Sl500 is Windows 7 x 86 installed. I have also 2 rudders (Akai APC20 and M-Audio UC33e), 1 Midi Interface and a kvm switch connected via USB.

  Almost everytime I make music with Cubase or Ableton Live I get holes in my audio stream. Audio playback stops just freezes for 1-10 seconds and the surface of my DAW. This becomes especially annoying when I record.

  Recently, I have disabled all devices in the BIOS except for Firewire and USB, but I am always running into the same problem. Then I got a look at the system information for Windows 7 and the saw - problems/sharing section - USB and Firewire to share the same IRQ. I'm almost certain that this is the problem causing the audio gaps.

  Is there a way to chanmge in Lenovo Sl500 BIOS IRQ settings?

  Best regards

  belochim

  After Plug and install a USB audio interface that I borrowed from a friend, I noticed that whenever I changed my KVM switch to the surface of the other PC Ableton froze for a second. The audio stream on the other hand kept and just as it was supposed to.

  The KVM switch is a "Digitus Pocket 2-port USB KVM switch" model No. "DS-11402-1".» This KVM switch seem to be a kind of diffusion in the USB bus which then interrupts the audio stream running on Firewire.

• USB Foot Switch triggers them connected and disconnected a beep

  Scythe USB Foot Switch Triple is originally the connected and disconnected beep continuously causing spike lag on my computer. Was started when I downloaded the Logitech software G600 Gaming Mouse on my computer. The pedal is showing as "usb composite device" on my device manager with an exclamation point. When I remove the Logitech Gaming Software the exclamation mark disappears and no beeps.

  Scythe USB Foot Switch Triple is originally the connected and disconnected beep continuously causing spike lag on my computer. Was started when I downloaded the Logitech software G600 Gaming Mouse on my computer. The pedal is showing as "usb composite device" on my device manager with an exclamation point. When I remove the Logitech Gaming Software the exclamation mark disappears and no beeps.

  You must contact probably two manufacturers (Logitech and false) to try to understand if there are newer versions of drivers and known issues.  They can work with you to resolve this conflict.

  A quick look indicates that you'll probably have more luck with Logitech that fake.  :-)

• USB tethering using android mobile

  I have connected my Young Galaxy mobile to my PC via USB cable. Then I turned on "packet data" and "USB tethering. But I could not connect my PC to the net. Give me a solution because I tired of "portable Wi - Fi Hotspot" that warms my mobile too.

  Hi Sreevamsi,

  It seems that you are unable to attach Samsung Galaxy Young to the computer that is running Windows 8.

  I recommend you to activate connection dosed and check.

  Check out the link:

  http://Windows.Microsoft.com/en-us/Windows-8/metered-Internet-connections-frequently-asked-questions

  If you still have questions, I would ask to contact Samsung for better assistance.

  You can check the link to do so:

  www.samsung.com/ca/support/main/supportMain.do?supportIaCode=10001

  Please write know us if you have other windows related issue.

• Link-5 is compatible with USB KVM switches?

  Is it possible to control two computers using a 5-link connected keyboard and mouse via a KVM switch USB?

  Yes.  I found if I ensure that my KVM systems aren't on the lock screen and plug the receiver into the keyboard (if specified) port and the system recognizes the keyboard and the mouse.  I use a HP 4500 mouse and keyboard of Elite v2 with a single Link-5 receiver and it works with a Ultra 2 port KVM switch.  In any case I hope THST help.

• Please help usb tethering problem

  3.1 6 usb tethring for computer iphone laptop lenovo win 8.1 package data unlimited

  When usinng utorrent downloads and conections STOPS after 5 to 15 minutes and the usb port died showing limited conection

  If I desconect my iphone and reconect to laptop it won't even load I have to restart my laptop so he can see my iphone via usb cable

  Help, please

  iPhone 6, iOS 9.3.1

  That can be your supplier of surveillance data and by cutting the data above a certain threshold of use - all that you say points to that - I would check with them first

• USB 6008 switching speed relay? Delay through software?

  Hi guys,.

  I have a Setup with a USB6008 which control some relays. However, I'm unable to get the relay to go fairly quickly. I can see by the USB6008 that the digital output ports have a speed of 150 Hz, which equals 6 m I want to be able to control the relays at intervals of 10 ms. The relays have a rebound time of 10ms. In theory, it should be just possible. However, I am getting some problems in calendar. Relay ports are open for too long, often in the low hundres of milliseconds. This makes me wonder if there is some sort of delay by turning the relay on or off... My VI is essentially a state machine which, in a State turns on the relay and wait an appropriate amount of milliseconds, and then passes to the next State, who deactivates the relay. The relay is set to simple bool, true and false. I'm sorry, but I am unable to share the VI. But also, it's more a theoretical question within the period that is present when talking about USB data acquisition boxes, I guess.

  Where I set up relay tasks, NEITHER Max, I can choose different "modes of generation. "on-demand" and "timed material." How will this affect the speed output digital?

  Thank you in advance,

  Sincerely,

  Peter

  When it comes to software distribution, you won't get a lot of precision.  But it sounds like you are using the next ms Multiple value 50ms somewhere in your state machine.

• USB Tethering (MiFi) and RNDIS driver

  Sorry, it's long.

  We test them and robust Dell laptop (Latitude E5404) and I'm working on it is about to pass to the user. They use 6620 L MiFis outside on the road usually attached.

  This * & ^) (thing # is NOT installed correctly.) I contacted Dell and Verizon for the sorted results, what has not happened.

  The situation: I plug the MiFi through the usb port. The driver begins to install. Initially, he said 'MiFi 6620 L' then converts to 'Remote NDIS Device sharing Internet' driver. Things seem to be going well until the yellow exclamation point appears and Windows will warn you that the driver installation failed. When you look at the driver in Device Manager, the details of the pilot show "the driver could not be started. Error code 10. »

  I have:

  ~ Uninstalled/reinstalled the driver
  ~ Uninstalled/reinstalled the USB drivers
  ~ Removed all software potentially conflicting
  ~ Tested the unit on a known working computer (Panasonic CF-30/31 with Win7 x 32-MiFi works great on old laptop)
  ~ Tested a working device known on the Dell (Win7 x 64 - same problem - cannot attach.)
  ~ Tried to select a different but similar driver via Windows
  ~ Will automatically search for updates of pilot
  ~ Checked for updates of the MiFi - it is updated
  ~ Scoured internet using a variety of search terms and not permanent
  ~ Ran CCleaner to detect that any transplant addicts who may have a negative influence on the installation of the driver
  ~ Tried on four USB ports on the computer
  ~ Ran SFC and chkdsk many times
  ~ Restored versions of BIOS all the way to the first
  ~ Review start-up control panel for all possible options that can have an impact on the departure of the pilot
  ~ Intel uninstalled and reinstalled devices
  ~ Copied the drivers from a known working computer, matching, no change
  ~ Performed a clean boot of Windows and the problem persists
  ~ Made an update of the plant on the computer and the problem with attachment occurs straight out of the door

  It seems that the driver should work. It can be installed anywhere. It is not intended to be installed like this. This is supposed to be plug-and-play.

  Dell nor Verizon really know what is happening. The information is to be transmitted to the network with Verizon engineers to see if they have additional ideas.

  So. Do any of you?

  In case someone falls on this in Google first, I thought, pretty well in my case, with the help of engineers from Novatel, a detective and good ol' ' trial and error.

  During the visit the Intel site, it is worth noting here and there that they use generic drivers. When looking for drivers who may be correct, many warn that they are for developers only.

  My current contention is that Dell has done something with the Intel USB 3.0 Host Controller generic driver that is not compatible with the MiFi.

  I downloaded this driver from Intel on a whim, try everything that seems reasonable in an effort to understand and here! It worked! I've also just done a factory reset and tested the driver again and again, it works!

  I am happy and finally happy to put this part of the preparation of the computer behind me.

  Thanks to all who have offered their insight!

• USB Tethering with WIndows 8

  I have a Galaxy S3 and a Samsung series 5 ultrabook.  I use my phone via attached USB to access internet/data when the pc was under Win7, but now that I've updated for Win8, it no longer works.  The computer and the phone connect OK but I can't access the internet. Help?

  Hi Glenn,.

  Thanks for posting the query on Microsoft Community and we are pleased to help you.

  According to the request, it seems that you can not tether Samsung Android Galaxy S3 to the Samsung laptop running Windows 8.

  I recommend you to activate connection dosed and check.

  Check out the link:

  http://Windows.Microsoft.com/en-us/Windows-8/metered-Internet-connections-frequently-asked-questions

  If you still have questions, I would ask to contact Samsung for better assistance.

  You can check the link to do so:

  http://www.Samsung.com/ca/info/contactus.html

  Please write know us if you have other windows related issue.

  Concerning

• I have a Belkin USB peripheral switch I used with my PC or my wife. I just replaced his PC with a laptop with Windows7. The driver is not compatible with the new op system. You or Belkin have download free fix or pilot?

  Driver is not compatible with the new op system.  You or Belkin have download free fix or pilot?

  www.Belkin.com

• USB tethering to samsung galaxy s4

  How for fixation to the Samsung galaxy s4 for internet access?

  Hi Bryan,.

  Try these steps and check if that helps:

  (1) press Windows Key + C.

  2) go to settings, Internet sharing and turn it on.

  (3) then on your PC, check your available wireless access point connections and use the details in the sharing of the Internet is there to connect.

  If you want to share an Internet connection on Windows 8, you can use connection sharing Internet (ICS). Check this link for more information on the use of ICS:

  http://Windows.Microsoft.com/en-in/Windows-8/using-ICS-Internet-connection-sharing

   

  For more information on how to connect your android phone Samsung using contact tie their support for better assistance site.

  http://www.Samsung.com/in/support/main/supportMain.do

  Hope this helps, if you need help on Windows let us know.

• Question of Tethering USB Compact z5

  When USB tethering my Dell i3 Chromebook for my compact z5, I consume content, but updates are currently broken.  (' Help and about '-> 'On Chrome OS'-> ' find and apply updates). When an update is available, it simply indicates that attached to the Z5c.  When I disconnect the service modem and connect to the local wifi, it works very well.

  Does the Z5c block certain types of data or traffic over the attachment? I don't think that I had this problem with my old phone (Moto X 2013) Android.

  Update:

  Found this link: https://productforums.google.com/forum/#! topic/chromebook-central/tkihyoxz3Aw

  "

  • Open a shell CrOSH: 'Ctrl Alt t.
  • type " " " turn update_over_cellular '
  • type 'exit' " (or simply close the window/tab crosh)"

  Type update_over_cellular into my crosh resulted in:

  crosh> update_over_cellular
  [1106/103550:INFO:update_engine_client.cc(518)] Current update over cellular network setting: DISABLED
  crosh>
  

  It looks like the problem was on my end.

• Impossible to attach Windows 10 laptop computer to the Internet via cable USB iPhone 5 c after update to iTunes and iPhone (March 2016)

  System information:

  Tactile Lenovo Y50-70

  Construction of 10.0.10586 of Windows 10-10586

  iPhone 5 c - iOS 9.2.1

  iTunes - 12.3.2.35 / 64-bit

  Cell carrier: Etisalat AF

  Last year in Afghanistan, I have used my iPhone 5 c to attach my laptop to the internet simply by connecting via USB.  It has always worked.  Was very simple.  When I returned to the States for R & R in November 2015, I've updated my iPhone and iTunes to the latest versions and upgrades Windows 8.1 to Windows 10.

  I am now back in Afghanistan and USB tethering no longer works.  WiFi tethering works half the time.  The other half of the time, when I try and connect to the network of the iPhone, it is said, you cannot connect to this network.  When I can't connect to the phone, I disable the personal hotspot, WiFi and Bluetooth on the phone and then I turn it back on.  I also turn off my WiFi adapter on my laptop and turn it back on.  Which usually solves the problem and then I can connect via WiFi.

  Do some research on the internet, I read that there was a file corrupted when the current generation of iTunes, but Apple had set and you just need to reinstall the current version, which I did.  I have reinstalled iTunes by suggestions from different site.  After reinstalling iTunes and restart, I can always have my phone to connect to internet via the USB cable.

  I want to be able to connect my laptop to the internet using my phone via the USB cable.  I want it all works just as it did previously.  Connection via WiFi is a pain in the ass, because it does not work half the time and disconnects on a regular basis.

  Please tell us what should I do to solve this problem.

  Thank you.

  OK, I finally understand how to solve this problem.

  I was able to understand because of this post:

  https://discussions.Apple.com/message/29267225#29267225

  The problem is that Windows 10 was not install appropriate drivers for my iPhone.

  You can see 2 places to see.  We're in the control panel.  After you plug in your iPhone, the iPhone will be displayed and highlighted as not having is not a compatible driver.  The other place is in "Devices and printers", there you will see 3 apple devices: 1 Apple Mobile Device USB Driver, iPhone 2, and 3. Apple iPhone.  All three appear when I plugged in my iPhone.

  However, the problem was one that said iPhone really should have said "Apple Mobile Device Ethernet".

  So, how to fix this?

  Open devices and printers-> right click Iphone which should be under "Unscpecified"-> properties-> hardware-> Propterties tab-> change settings-> tab driver-> update driver-> Browse my computer for software Local-> Browse to the directory "C:\Program Files\Common Apple Mobile Device Support".

  Make sure you have the files box to include under verified.

  Who did.  Windows successfully installed the necessary drivers.  Now, I can easily connect to the internet via the USB cable again without any problems.